Used Brno for sale (67)

Condition: good (used), Year of construction: 2006, functionality: fully functional, operating hours: 21,495 h, AMADA HFT 50-20 – technical specifications Parameter Value Manufacturer AMADA Model HFT 50-20 Machine Type CNC hydraulic press brake Year of Manufacture 2006 Number of Operating Hours 21,495 hours Pressing Force 500 kN / 50 tons Working Bending Length 2,000 mm Distance Between Uprights approx. 1,660 mm Ram Stroke approx. 200 mm Maximum Opening approx. 470 mm Upright Overhang approx. 400 mm Approach Speed approx. 100 mm/s Working Speed approx. 10 mm/s Return Speed approx. 100 mm/s Motor Power approx. 5.5 kW Machine Weight approx. 4,800 kg CNC Control Specific version needs to be verified Back Gauge CNC-controlled, configuration depending on equipment The stated dimensions, speeds, power consumption, and weight are approximate and may vary depending on the configuration. Accessories – set of bending tools The machine includes a set of bending tools with the following radii: R1.0 R1.5 R2.0 R2.5 R3.0 Iiedpfxsz N Smko Ap Dsh R5.0 R10 R20

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 44,860 mm, total height: 5,250 mm, total width: 17,100 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, input frequency: 50 Hz, heating capacity: 350 kW (475.87 HP), compressed air connection: 8 bar, workpiece height (max.): 2,000 mm, workpiece length (max.): 800 mm, clearance between the columns: 3,000 mm, fuel: domestic gas H, insulation material: PUR, insulation thickness: 80 mm, workpiece width (max.): 800 mm, Equipment: cabin, lighting, For sale: application section of a powder coating plant from 2021. Application technology: NORDSON ENCORE HD, charging cascades with voltage up to 100 kV, control system POWDER PILOT, feed center SPECTRUM HD II, ENCORE HD spray guns (16 units) + 2 manual guns, HDLV type pump (18 units). Iodpfswhbnlex Ap Deih

Condition: good (used), Year of construction: 2005, functionality: fully functional, Cotrol system Fanuc 21iB. Iedpfx Apsyk D R Tj Deih Probe Marposs T36. X ... 1200 mm Y ... 600 mm Z ... 640 mm Table ... 1300x620 mm Max. table loading ... 800 kg Taper in spindle ... ISO 40 Spindle revolutions ... 50 - 8000 rpm Number of tools in tool changer ... 24 ks Machine dimensions ... 2001 x 3641 x 3158 mm Weight ... 7000 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Iisdjwmm U Uspfx Ap Djh

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 7512-3901-FA, We will provide more detailed information about the equipment during a personal on-site visit, which we recommend. Ijdpfxjzphu Ej Ap Dsih

Condition: good (used), Year of construction: 2022, functionality: fully functional, We recommend a personal inspection to discuss the machine's details in greater depth. Iiedszphtnjpfx Ap Doh

Condition: good (used), Year of construction: 2003, functionality: fully functional, Key parameters: Manufacturer: TRUMPF Maschinen Austria GmbH & Co.KG Model: TrumaBend V170 Year of manufacture: 2003 Serial number: E10156 / B0105A0067 Pressing force: 1700 kN (170 tons) Max. bending length (working length): 4,080 mm Throat depth (distance between side frames): 3,680 mm Max. stroke: 365 mm Ijdpfxoz Hk Iao Ap Djih Stand clearance (cut-out): 410 mm Electrical and hydraulic parameters: Supply voltage: 3x400 V Frequency: 50 Hz Rated current: 46.3 A Total power consumption: 32.0 kVA Max. operating pressure: 340 bar Oil capacity: approx. 95 l Diameter of hydraulic cylinder: 190 mm Dimensions and weight of the machine: Total weight: approx. 18,000 kg External dimensions of the machine (W x D x H): approx. 5,000 × 2,210 × 3,100 mm. The machine is offered without tooling.

Condition: good (used), Year of construction: 2017, On behalf of our client, we offer for sale a Biesse machine approximately 10 years old in good condition. A suitable investment for starting new production with a limited budget. Isdpfeywup Uex Ap Deih

Condition: good (used), Year of construction: 2016, Description: Iiodpfx Apeztx Spe Djh The machine is in good technical condition and can be tested upon prior agreement. It includes all equipment and, if applicable, accessories (holders, tools, etc.).

Condition: good (used), Year of construction: 2011, functionality: fully functional, We recommend a personal inspection to discuss the machine's details in greater depth. Iedpjzpd Etefx Ap Dsih

Condition: used, Year of construction: 2005, Single-sided edge bander designed for precise and stable edging of solid wood and panel components (chipboard, MDF, laminate). The machine is conceived as a compact yet fully equipped solution for small- and medium-batch production, with an emphasis on edge processing quality. A robust cast iron frame ensures high rigidity and long-term geometric stability of the machine. It features a classic continuous conveyor with a pressure belt and a complete set of machining units for finishing the edge in a single pass. Technical configuration of the machine: - Pre-milling unit - Material pre-heating - Automatic EVA glue application - EVA glue roller - Front and rear end trimming saws - Rough trimming unit - Corner rounding unit - Radius scraper - Glue scraper - Grooving unit - Brushing unit - Return conveyor Iodpfx Aeyfw Syep Dsih

Condition: good (used), Year of construction: 2014, functionality: fully functional, Description: The machine is in good technical condition, and testing is possible upon prior arrangement. Measurement range: 800 × 1200 × 600 mm. TESASTAR-M measuring head. TESA/TMA adapter. TesastarMP body. 4 TesastarMP measuring modules. TESASTAR-e system. Extensive set of M2 measuring probes. Measuring probe extensions. 5-position rotary measuring probe system. CMM/joystick control. PC workstation. Currently installed software: PC-DMIS CAD++ 2024.2. Isdpozy Ig Nsfx Ap Dsih

Condition: used, Year of construction: 2013, Alberti Vector B/CN is a vertical coordinate borer designed for precise drilling and machining of flat materials. The machine features continuous workpiece feed with automatic loading and positioning along the axis. Thanks to its monolithic steel construction and four-axis control, it offers high rigidity, stability, and accuracy even under demanding operating conditions. Optimized work cycles enable efficient drilling, milling, and handling of the workpiece. The combination of multiple spindles, independent vertical units, and the option to use a saw makes this machine a versatile solution for the furniture and woodworking industries. Technical Data Max. workpiece dimensions: 3200 × 1200 mm Min. workpiece dimensions: 300 × 130 mm Processable thickness: 10–60 mm Max. programmable speed (X/Y/Z): 100 / 45 / 12 m/min Iiedpfjxgfg Tsx Ap Doh Axis positioning tolerance: ± 0.1 mm Spindle motors: 2 × 1.5 kW Spindle speed: 3800 rpm Independent vertical spindles: 30 units, 32 mm pitch Saw motor (Ø 125 mm): 1.33 kW Saw inverter: 7.5 kW – 1000 ÷ 18000 rpm Electrospindle motor: 6.7 kW Electrospindle speed: 9000 ÷ 18000 rpm Max. tool diameter: 60 mm Max. required power: 10 kW Operating pressure: 6–7 bar Air consumption: 100 Nl/min Exhaust air speed: 30 m/s Chip extraction capacity: 5000 m³/h Total machine weight: 3500 kg Central unit weight: 350 kg Dimensions (L × W × H): 5600 × 2110 × 2200 mm

Condition: like new (used), functionality: fully functional, empty load weight: 520 kg, maximum load weight: 2,180 kg, overall weight: 2,700 kg, axle configuration: 2 axles, total width: 2,200 mm, suspension: steel, color: silver, trailer brake: trailer braked, Year of construction: 2014, Equipment: jockey wheel, tail-lift, For sale is a high-quality German vehicle transporter / car transport trailer, a Z-Trailer AT27-20/48DW, manufactured in 2014. The trailer has been used exclusively for private transport of classic cars and has been treated with care accordingly. It has not been used to transport damaged vehicles, vehicle wrecks, or vehicles involved in accidents. The trailer has seen little use, has been regularly serviced, and is in very good, fully functional condition. The vehicle transporter is ready for immediate use. Technical data: Ijdpfx Apez I Eqxs Deih - Manufacturer: Z-Trailer - Model: AT27-20/48DW - Vehicle type: Car transport trailer / vehicle transporter - Year of manufacture: 2014 - Permissible total weight: 2,700 kg - Payload: approx. 2,200 kg - Mileage according to documents: approx. 10,000 km - Color: Silver - Braked trailer - 13-pin electrical connection - Reversing light - Rear fog light - VIN / chassis number: W0920D22ENZ18053 - Main inspection / technical inspection valid until: 05/2027 Equipment and features: - Tilting loading / access platform - Continuous, closed loading floor / full floor - Winch - Two spare wheels - Two extendable aluminum access ramps in the rear area - Access ramps with integrated brake - Extensive accessories for secure vehicle fastening - Lashing eyes / fastening points - Wheel holders - Support wheel - Robust tube / profile drawbar - Braked version - Fully equipped for the transport of cars, classic cars, sports cars and other vehicles The trailer was purchased in the Czech Republic and has been with the first owner ever since. It is damage-free and has a valid technical inspection. A service booklet is available. The car transporter has been used exclusively for private purposes, in particular for the transport of classic cars. Due to this use, it has not been exposed to the typical stresses of a commercially used tow or accident transport trailer. The trailer is currently not in use and is therefore for sale. Condition: Very good, well-maintained condition. Technically fully functional. Regularly serviced. Ready for immediate use. Location: Slavkov u Brna / Austerlitz near Brno Czech Republic Postal Code: 684 01 Inspection possible by appointment. Price: €7,490 net €9,063 gross including 21% VAT VAT can be shown / VAT deduction possible. The price is negotiable within reasonable limits. Sale by the owner – we are not a vehicle dealer or a used car dealer. The trailer offered is owned by us. Further information or additional photos can be provided upon request. I would post it on Machineseeker like this. The phrase "negotiable within reasonable limits" indicates room for negotiation, but does not sound like an invitation to make a drastically lower offer.

Condition: good (used), Year of construction: 2001, Description: Iiedpjz Imtbefx Ap Deh The machine is in good technical condition and can be tested upon prior arrangement. The machine is fully functional and is equipped with a new roofing. It does not include a probe, clamping devices, or tools.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10044/0218, !!! Detailní fotografie a produktové specifikace soutruhu TLI 10 naleznete v PDF souboru v příloze. !!! !!! TLI 10 SLOUŽÍ PRO OBRÁBĚNÍ VNITŘNÍCH A BOČNÍCH ČÁSTÍ PRSTENŮ Iiodpfey S Sz Rsx Ap Djh !!! pro vnější obrobení nutno zakoupit stoj TL0 10, který nenabízíme Soustruhy jsou speciálně navrženy pro zpracování snubních prstenů a náramků. Oddělení vnitřního obrábění (TLI 10) a vnějšího obrábění (TL0 10) na dva stroje zajišťuje vysokou produktivitu. Veškeré potřebné soustružnické operace (rovinné obrábění, rádiusy, boční obrábění a srážení hran) lze provádět postupně bez nutnosti úprav nebo přestavby strojů. Technické parametry: TLI 10 Parametr Hodnota Pohon 0,55 kW s elektrickou brzdou Napájení 380 V / 50 Hz Regulace otáček potenciometr Rozsah otáček 0–1400 ot./min Rozměry 100 × 70 × 130 cm Hmotnost 170–190 kg

Condition: good (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Machine is being sold on behalf of the customer and can be inspected under power. Machine location: Czech Republic (Brno) Manufacturer: Deckel Maho Model: DMC 635V Year: 2007 Approx. 32,000 operating hours Control: Heidenhain iTNC 530 Iedpfoylmdfjx Ap Djih Spindle mounting: SK40 Speed: 10,000 rpm Travel (X/Y/Z): 635 / 510 / 460 mm Clamping surface (table): 790 x 560 mm 30-position tool changer + Blum laser tool measurement + Paper band filter / ICS 20 bar / 600 l + Chip conveyor Dimensions (approx.) LxWxH 260 x 390 x 240 cm Installation area 530 x 590 cm Weight: approx. 4,200 kg

Condition: used, We are offering for sale a floor-type press made by the Italian manufacturer Colombo R. Available for immediate delivery. Iijdpozry Rwefx Ap Deh

Condition: good (used), Year of construction: 2007, functionality: fully functional, HAAS VF-2SSHE + MIDACO Pallet System – 2007 CNC Vertical Machining Center with Pallet System For sale: HAAS VF-2SSHE CNC vertical machining center, equipped with a MIDACO pallet system. The machine is installed, in working condition, and available for inspection and testing while powered on, by prior arrangement. Iijdpfoz Dq Nfox Ap Dsh Technical data: Manufacturer: HAAS Model: VF-2SSHE Year of manufacture: 2007 Serial number: 1061369 X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Spindle taper: ISO 40 Automatic tool changer MIDACO pallet system included Power supply: 360–480 V / 3 phase Machine in good working condition Inspection and test run possible while powered on The MIDACO pallet system allows workpiece preparation outside the machining area and can help reduce loading and unloading times, making the machine particularly suitable for series production. Further technical details and the exact machine configuration can be verified during an on-site inspection.

Condition: good (used), Year of construction: 2019, In good technical condition and fully functional. Year of manufacture: 2019 - Max. turning diameter: 220 mm (for standard turret) - Max. turning length: 356 mm - Chucking diameter over bed: 641 mm - Chucking diameter over cross slide: 413 mm - X/Z-axis travel: 200 / 356 mm - Rapid traverse X/Z-axis: 30.5 m/min - Spindle size: A2-5 - Max. power: 11.2 kW, spindle drive: vector drive - Max. torque: 102 Nm - Max. spindle speed: 6,000 rpm - Bar capacity (spindle bore): 44 mm - Automatic hydraulic chuck: 165 mm Ijdpfxey Hgvxe Ap Doih - 12-position tool turret VDI40 (option BOT or hybrid) - Option for driven tools and C-axis on spindle - Coolant tank: 114 l with pump - Electrical connection: 3x400 V / 50 Hz, 14 kVA - Machine weight: 3,450 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total length: 2,900 mm, total height: 1,500 mm, total width: 1,600 mm, type of input current: three-phase, For sale is a Maqford BEA2 forming machine. Working length 150-1500mm, sheet thickness max. 2.0mm, pipe diameter 120-600mm. Including a set of packages for individual diameters. Iodpswmniaofx Ap Dsih

Condition: good (used), Year of construction: 2014, The machine is in good working order, and can be tested upon prior arrangement. It features a Fanuc 0i-TD control system. Iodpfxsznl Iyj Ap Deih

Condition: good (used), Year of construction: 2021, functionality: fully functional, We recommend a personal inspection to discuss the machine's details in greater depth. Iijdpfx Ajzphtusp Doh

Condition: reconditioned (used), functionality: fully functional, Refurbished four-sided planer and moulder from SCM GROUP. This four-shaft machine enables high-quality and precise planing and is equipped with a soundproof safety enclosure. Its simple and proven construction ensures long service life and consistent performance. The machine is designed for small workshops producing simple battens, semi-finished products for panel gluing, machining of window scantlings, etc. Thanks to its capacity, this four-side planer is also suitable for pre-processing before a machining center for window manufacturing. Maximum workpiece dimensions: 180 x 105 mm Aluminium planing heads included in the machine price Suitable for profile tools up to 10 mm Includes optional press roller in front of the tool Technical data: - Working width min/max: 23 / 180 mm - Working height min/max: 6 / 105 mm - Useful length of vertical/horizontal working spindles: 120 / 190 mm - Axial spindle adjustment: 15 mm - Motor power (horizontal spindles): 7.5 kW Iodpfxswbgtge Ap Doih - Motor power (vertical spindles): 5.5 kW - Feed motor power: 1 kW - Infeed table length: 1700 mm - Feed speed: 6/12 m/min - Spindle speed: 6000 rpm - Tool diameter: 100 mm - Spindle diameter for tool mounting: 35 mm - Feed roller diameter: 120 mm - Extraction connection: 160 mm - Weight: 1200 kg Please note: The status of refurbishment and the machine’s readiness for collection must be verified in advance! Stock location: Telnice near Brno Naturally, machine testing, demonstration, and operator training are included.

Condition: used, Year of construction: 2007, machine/vehicle number: AH/004965, The STEFANI Solution 5400 is a single-sided industrial edge banding machine designed for medium and large production facilities. The SOLUTION model range was conceived as a flexible solution for both stand-alone workstations and integration into automated production lines. SALE ON COMMISSION. Iisdoynb Nnopfx Ap Deh