Used Building Compressor for sale (4,837)

Condition: ready for operation (used), Year of construction: 1999, operating hours: 0 h, PROD. BOGE TYPE SD40 S/N 31412 YEAR 1999 POWER (kW) 30+1.10 CAPACITY (m3/min) 4.30 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 17000 / 51100 FREQUENCY CONVERTER no BUILT-IN DRYER yes HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no Psdpfxjz E Hhts Ab Togu CONNECTION 1 1/2 NEW/USED USED

Condition: excellent (used), Year of construction: 1997, PROD. KAESER TYPE CS91 S/N 7601345 YEAR 1997 POWER (kW) 55 CAPACITY (m3/min) 9.55 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) 14215 / 71583 FREQUENCY CONVERTER no BUILT-IN DRYER no Psdpfoz D Ud Hex Ab Togu HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON-BOARD TANK no DOCUMENTS no NEW/USED USED

Condition: excellent (used), Year of construction: 2009, operating hours: 58,438 h, functionality: fully functional, power: 110 kW (149.56 HP), volume flow: 1,227.6 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Screw compressor, Kaeser DSD202 110 kW 8.5 bar 20.46 m3/min Pedpfx Abozna Rps Tegu Year of manufacture: 2009 Operating hours: 58,438

Condition: used, Year of construction: 2022, feed pressure 10 bar liter capacity 2,71 m³ / min motor speeds: 3000 U/min dimensions 1300 x 1000 x 1900 mm total power requirement 18,5 kW weight of the machine ca. 500 kg Features: - Focus Control 2.0 control system - Network pressure sensor Pjdswq Sz Ispfx Ab Togu - Belt-driven drive system - Soundproofed

Condition: used, 1,450 rpm, 28.7 kW Pgjdpfjzr H Trox Ab Tsu at 2 bar, 580 m³ volumetric flow rate.

Condition: excellent (used), Year of construction: 2016, operating hours: 22,314 h, functionality: fully functional, power: 55 kW (74.78 HP), volume flow: 513 m³/h, pressure (max.): 8.6 bar, type of cooling: air, Oil-free screw compressor, Atlas Copco ZT55VSD Inverter integrated Pgodpjzwdt Tjfx Ab Teu 55 kW 8.6 bar 8.55 m³/min Year of manufacture: 2016 Operating hours: 22,314 h

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Psdpjzu Aibefx Ab Togu Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: repair required (used), Year of construction: 2010, operating hours: 64,380 h, functionality: unexamined, power: 132 kW (179.47 HP), volume flow: 1,562.4 m³/h, pressure (max.): 8.1 bar, type of cooling: water, Screw compressor Atlas Copco GA132VSDW Inverter integrated 132 kW 8.10 bar Psdpszznqkefx Ab Tjgu 26.04 m3/min Year of manufacture: 2010 Operating hours: 64,380 h

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Pgsdpfxszzp N Ij Ab Tju Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Condition: good (used), Schneider Compressor 670-270 ST Podpfxozzclpj Ab Tegu used, including refrigerant dryer Tank volume 270 liters Suction capacity 670 liters/min Delivery capacity approx. 515 liters/min Maximum pressure 10 bar Speed 1030 1/min Motor power 4.0 kW / 400V Dimensions: W x D x H 850 x 830 x 1800 mm Weight: approx. 160 kg

Condition: repair required (used), Year of construction: 2007, functionality: not functional, power: 250 kW (339.91 HP), volume flow: 2,256 m³/h, pressure (max.): 9.75 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Screw compressor Atlas Copco GA250FF Podpfxozhu Naj Ab Tsgu Dryer integrated 250 kW 9.75 bar 37.80 m3/min Year of manufacture: 2007 Main motor defective Price: 9,000 EUR

Condition: good (used), Year of construction: 1997, functionality: fully functional, OIL-FREE AIR COMPRESSOR Designed to supply oil-free compressed air for low-pressure industrial applications. TECHNICAL DATA Maximum working pressure: 3.5 bar(g) Typical operating pressure: 3.2 bar Pjdpfx Abjzvllns Tsgu Input power: 168 / 187 kW Shaft speed: 2,220 / 3,570 rpm Approximate dimensions (L × W × H): 3,000 × 1,600 × 2,000 mm Approximate weight: 4,000 kg Serial number: AIF042384

Condition: used, Year of construction: 2023, operating hours: 2,044 h, We are offering this used Atlas Copco XATS 138 piston compressor, manufactured in 2023, for sale. Manufacturer: Atlas Copco Model: XATS 138 Emission stage: Stage V Operating hours: 2044 h Operating pressure: 0.0 bar Speed: min⁻¹ Pjdozvmnqspfx Ab Togu If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 108 kg, power: 55 kW (74.78 HP), fuel type: electric, Danfoss SH1804ABE 44.5KW refrigeration compressor for sale R410 manufacturer: Danfoss year of manufacture: 2016 type: SH180B4ABE Compressor type Hermetically sealed scroll Mode Medium temperature (MBP), High temperature (HBP) Refrigerant Freon R410A Cooling capacity EN12900 44500 W Volumetric productivity 29.6 m3/h Compression volume 170.2 cm3 Power supply 3 phase / 380-420 V / 50 Hz Power factor 3.21 Maximum operating current 27.0 A Inrush current 170.0 A Oil volume 6700 cm3 Pressure line connection 28.6 mm Podpfjyhpl Djx Ab Tegu Suction line connection 41.28 mm Dimensions 317.5 × 317.5 × 682.5 mm Weight 108.0 kg Displacement, cm3/rev: 170.2 Power supply: 380-400V/3 phases/50Hz Cooling capacity, kW, R410A, ARI air conditioning (To=+7.2C, Tk=+54.4C, SH=11.1K, SC=8.3K): 44.5 Oil charge (l): 6.7 Net weight (kg): 108

Year of construction: 2011, operating hours: 39,521 h, condition: excellent (used), machine/vehicle number: 1002, Article-No.: DSD.2C Equipment / Additional information: The compressor is water-cooled & has heat recovery. Rated power: 110.0 kW Motor speed: 1485 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C Pedpoyhpqtofx Ab Tjgu

Condition: good (used), Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, dividing hood compressor, dividing hood compressor, cooling unit, hermetic compressor Pgodpfx Abjyk Tg Dj Tsu -Manufacturer: Copeland, Compressor Refrigeration compressor type ZR11M3-TWD-561 -Voltage: 380-420V / 50 Hz -Technical data: see photo of the nameplate -Number: 2x compressor available -Price: per piece -Dimensions: 380/330/H550 mm -Weight: 91 kg/unit

Condition: new, Year of construction: 2023, feed pressure 10.0 bar Effective free air delivery 700 L/min motor 400 V Pgedpsxaahxjfx Ab Tju 0 250 Liter weight of the machine ca. 397 kg. total power requirement 5.5 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Condition: excellent (used), Year of construction: 2000, volume flow: 1.2 m³/h, KAESER AIRCENTER SM 11 screw compressor Motor 7.5 kW Capacity 1.20 m3/min. Pjdpfsxn Atmex Ab Tsgu Pressure 7.5 bar THE COMPRESSOR IS FULLY OPERATIONAL.

Condition: new, feed pressure 10 bar Effective free air delivery 252 L/min Receiver capacity 90 l / bar Number of cylinders 1 Stk. motor 400Volt / 1,5KW V / KW turning speeds 777 U/min Pgjdjvkiztepfx Ab Teu weight of the machine ca. 70 kg. range L-W-H 0,97 x 0,5 x 0,9 mm

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 0000071163, Type: ALPHA20 HOR Equipment / Additional information: With tank Refix DE (Fabr. No.: 15 P 0316 90633) Pgedpfxsunv Rxs Ab Tju

Condition: used, functionality: fully functional, Ferwood Code: RU0009658 - Manufacturer Code: G-BH12BH1610-7HH36-Z - Condition: Used - Functionality: Fully functional - Weight: 65KG - Dimensions: 120X80X60 - If interested we offer overhaul service, please contact us. Pgedpfx Aeu H Ib Ieb Tou

Condition: excellent (used), Year of construction: 2016, S016967 PROD. KAESER TYPE SK22 S/N 1566 YEAR 2016 POWER (kW) 11 CAPACITY (m3/min) 1.75 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED Pgjdsz Duqtspfx Ab Tsu

Condition: used, functionality: fully functional, power: 30.6 kW (41.60 HP), fuel type: diesel, color: yellow, empty load weight: 750 kg, fuel: diesel, final compaction pressure: 7 bar, Year of construction: 2007, operating hours: 1,052 h, mobile compressor: + Kaeser + Model M43 Sigma + mounted on a single-axle chassis + height-adjustable drawbar with pintle hitch + 42 hp Kubota diesel engine (V1505) + 1,052 operating hours + 7 bar + 98 dB + 750 kg + municipal equipment, first owner Pjdpfx Aboz Duynj Togu Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: excellent (used), S014913 PROD. ATLAS COPCO TYPE GX18 S/N API441069 YEAR 2005 POWER (kW) 18.5 CAPACITY (m3/min) 2.64 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 46443 FREQUENCY CONVERTER no Pgedpfx Abjz Dwb Ie Tou BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON-BOARD TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: excellent (used), Year of construction: 2018, S016947 PROD. ALUP Psdpfjz E Rpbox Ab Togu TYPE ALLEGRO26 CE S/N ITJ210759 YEAR 2018 POWER (kW) 26 CAPACITY (m3/min) 0.77-4.73 at 7 bar PRESSURE (bar) 7-13 HOURS (RUNNING/TOTAL) 47881 FREQUENCY CONVERTER yes BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no CONNECTION 1" NEW/USED used DOCUMENTATION no