Used Carbon for sale (660)

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Technical Data for Installation: Number of rack rows: 01 pc Length per rack row: 22,440 mm Number of bays per rack row: 06 pcs Number of levels incl. ground level: 06 pcs Technical Data for Capacity: Pallet spaces per bay: 28 pcs Pallet spaces per rack row: 168 pcs Total pallet spaces: 168 pcs Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. pallet weight: 900 kg Max. bay load: 19,000 kg Lowest clear storage height: 1,080 | 880 mm Scope of delivery includes: 07x Pallet rack frames, used Material finish: Sendzimir galvanized Frame type: P215 Profile dim.: 120 x 100 x 2.5 mm Including horizontal and diagonal braces, and base plates Frames are pre-assembled (bolted construction) Height: 14,100 mm Depth: 1,050 mm 72x Pallet rack beams, used Material finish: RAL 5010 gentian blue INP profile: 120 x 58 mm Beam type: TRV1-360-12-l Connector: 4 hooks Clear width: approx. 3,600 mm Max. load per pair of beams: 3,600 kg, with evenly distributed load Cjdpsyc S Taefx Afnopu 144x Locking pins, used Material finish: Sendzimir galvanized For securing the beams against unintentional removal 28x Bolt anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x Levelling plates, used Design: fully galvanized For leveling rack frames that are set up on uneven floors 01x Load sign with specifications for bay and compartment loads, manufacturer, and commissioning number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Transportation or shipping of this item is subject to additional costs, which can be quoted separately depending on the delivery location and order volume.

Condition: used, Used Buhler horizontal hammer mill. - Carbon steel rotor has diameter approximately 980 mm. - Rotor is divided into 3 section. - Rotor has (8) shafts, each shaft is equipped with (10) swing hammers. - Rotor is driven by 75 kW, 380/660 V, 1480 rpm, 50 Hz electrical motor. - Includes number of spare screens and switchboard. Cpsdpjygvnvefx Afnou

Condition: used, Used APV Anhydro model PSBD 58 stainless steel spray dryer. Unit rated approximately 50 kg/hour water evaporation rate (depending on product) at inlet/outlet temperatures of 600/140°C. Drying chamber approximately 1600 mm inside diameter x 1800 mm cylindrical height x 1500 mm conical height. Chamber has a safety rupture plate buti is not connected. Outside is insulated and claded by stainless steel plate. Inspection doors 450 x 550 mm. Unit includes (1) top mounted Anhydro nozzle co-current atomiser (could be used rotary atomiser but is not included). Unit includes 2 zones electrical air heater, Herding carbon steel filter, cyclone and ventilator. Electrical switchboard with integrated control panel is included. Has a ....PLC control system. Codsygvbvopfx Afnopu

Condition: used, Year of construction: 1996, Overview This isobaric PET bottle filling and capping machine was manufactured in 1996 by German company Krones. The block machine includes an ALCOA capping machine for screw caps and a cap feeding system from Gassner. It is suitable for carbonated soft drinks. The machine is out of production but still connected.  Technical data  filling and capping machine as a block system number of filling stations: 132 number of capping stations: 30 isobaric filling system suitable to carbonated soft drinks capping system: ALCOA Kupi 30/1080 for screw caps  cap feeding system: Gassner  capacity: 36.000/h at 1,0L  including neck handling system  bootle lifting cylinders direction: left-right / clockwise Cpedpfeydbrbex Afnou

Condition: used, Year of construction: 2000, Overview The following 2 component mixer was built in 2000 by the German manufacturer Krones. The machine is available immediately in its current good condition.  Technical data  capacity 45,000L/h 2 components  Anton Paar densimeter  suitable for carbonated drinks year of manufacture: 2000 SIEMENS control Codpfx Afeyc U Utjnspu

Condition: used, Year of construction: 2015, Overview This compact isobaric filler was manufactured in 2015 by Italian company Rizzolio. The Rizzolio RLV 2 ISO is designed for small breweries and artisanal beverage producers requiring precise CO₂ pre-injection and controlled filling of carbonated beverages such as beer. The machine has two filling heads and offers a robust, easy-to-maintain design. It is being sold because the owner purchased a larger filler. Recently, both electrical and mechanical parts were repaired. Technical data Capacity: Approx. 250 bph Formats: Adjustable for different bottle sizes Filling system: Isobaric with CO₂ pre-injection into filling bell Valves: 2 Max. working pressure: 5 bar Operation: Two manual levers for bottle lift and filling cycle; automatic gas compensation after first cycle Electrical supply: Single-phase, 220 V   Cpodpfoxd Ez Eex Afnou

Condition: used, Year of construction: 2011, Overview  This shrink packer was manufactured in 2011 by the Italian company Giemme Thermo. The Giemme SLH is a film-only shrink wrapping machine used for secondary packaging of multipack PET bottles (1.5 L format). The machine is equipped with two parallel lanes, allowing high throughput and flexibility in packaging configurations. The machine is no longer in production but still installed and will be available from December 2025. A set of spare parts is included, and dismantling and truck loading can be quoted separately. Technical data  Capacity: 20 cycles/min Formats: 2 × (3 × 2) × 1.5 L 6 × (2 × 1) × 1.5 L Application: Cider, lemonade, soda, carbonated beverages Power Supply: 40 kW Dimensions (L × W × H): 650 × 170 × 250 cm Configuration: Dual-lane infeed for higher flexibility Film Type: Shrink film only (no tray) Condition: Very good; still installed and connected Availability: 20 December 2025 Codpfexrc Hhsx Afnspu

Condition: used, Year of construction: 2017, Overview This PET filling line was manufactured between 1998 - 2017 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 10.500 - 18.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 10.500 - 18.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Kosme | 2017 Elevator preform | Kosme | 2017 Rinsing/Filling/Capping | Tekal | 50/70/12 | 1998 Inspection machine | Heuft | 2010 Date coder | Printer Laser | 2017 Labelling machine | Sidel | 2017 Packing machine | SMI | 2002 Palletizer | SIPA | 2011 Pallet stretcher | SIPA | 2011 Mixing- and carbonating unit | Adue | 2013 Beverage analyzer | Maselli UR21 | 2009 Conveyors for empty PET bottles | Silga | 2017 Conveyors for filled PET bottles | Silga | 1998                                                                                             Conveyors for trays | Silga | 1998 Cedpfxex Rrdcj Afnopu

Condition: used, Year of construction: 2018, Overview  This isobaric filler was manufactured in 2018 by the German company Leibinger, with the labelling system added in 2020 by ENOS. The system consists of a 12-head isobaric filler with 4-head crown capper, an ENOS C5000 labellier, and auxiliary equipment for packaging. It is designed for beer and other carbonated beverages and offers a complete solution from filling to labelling and carton sealing. The machines are immediately available. Technical data  Leibinger Filling and Capping Machine (2018) Capacity: Up to 3,000 bottles/hour (330 ml) Filling system: 12 counterpressure long-tube valves Capping system: 4-head crown capper (26 mm) Bottle format: 0.33 L (prepared) Working pressure: 2.0 – 2.2 bar Working temperature: 0 – 4 °C (optimal) Oxygen pickup: 10–12 ppb dissolved oxygen Vacuum system: Integrated CO₂ pre-evacuation and vacuum pump Product pump: Included CIP system: Automatic and programmable Machine direction: Left to right Construction: AISI 316L stainless steel Electrical requirements: 400 V / 3PH+N+PE / 16 A / 50 Hz ENOS C5000 Labelling Line (2020) Capacity: 2,000 – 6,000 bph Bottle formats: Cylindrical bottles, max. height 185 mm, max. length 300 mm Labelling stations: 1 (option for second station) Label type: Self-adhesive (also supports polypropylene labels) Bottle infeed: Screw conveyor system Sensors: Self-adjusting photocell for transparent labels Control system: Processor board with inverter-based speed regulation Output system: Smoothing unit with adjustable perforated belt Transport system: 1.5 m conveyor with traction motor Rotary tables: 1 infeed + 1 outfeed, both motorized Electrical control: 3 inverters (for conveyors, labeller, and filler) BEA C26U Semi-Automatic Carton Sealer Function: Seals top and bottom of cartons Adjustments: Width and height adjustable Conveyor: Plastic rollers, 1.5 – 4.5 m   Cpjdpfxsyb S S Hs Afneu

Condition: used, Year of construction: 1999, Overview  This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data  Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pick&Place neckhandling system Integrated foaming system Neumo butterfly valves Cpjdpswiizpsfx Afnju

Condition: used, Year of construction: 2017, Overview  The Tecnoimpianti MINI STAB 300 SINGLE is a compact system for the acid stabilization of must and wine using the ion exchange process. It was built in 2017 by the Italian manufacturer Tecnoimpianti Water Treatment S.r.l. and was rarely used by the original owner and is now being sold due to a change of ownership. The machine is therefore in very good condition and available immediately. It is ideal for wineries, breweries or the production of carbonated beverages. Technical details Capacity: approx. 300 l/h Area of application: Acidification / stabilization of must and wine Process: Ion exchange with strongly acidic cation exchange resin Compressed air requirement: min. 6 bar Power supply: 400 V / 3 Ph + N / 50-60 Hz Installed power: 3.2 kW Operation: Touchscreen HMI Protection class: IP65 Compressor tank: 400 L, 3 bar operating pressure Certification: EU-compliant / CE Special features Fully automated process control Precise pressure and temperature control Stainless steel construction (hygienic & durable) Plug-and-play system with touchscreen Built-in nitrogen feed Effectively reduces potassium bitartrate formation Cpsdpfx Aowm Rfkofnsu

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 14.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Labelling machine | Krones Contiroll | 2004 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009 Codpfxeyb Tuie Afnjpu

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Electrical specs: 400 V / 50 Hz Control systems: ABB, Siemens Operating direction: Standard Scope of Delivery  Blow moulder: SIG Corpoplast Blomax 24, year 2008 24 stations, heating oven with 20 boxes, ABB control Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK Air conveyor: NTS Mistral, year 2000 Pneumatic adjustable rails, basket cable tray Filler: KHS Innofill EV-VF, year 2000 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version Inspection & Coding: Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 Bottle laser coding: Videojet with housing Pack inspection: KHS Innocheck CUB, year 2015 Packing machine: Kisters SP060V, year 2000 Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only Conveyors & Pack labelling: Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication Pack conveyor: Paxona + Schaefer, year 2009 Pack labelling: Contact 100, self-adhesive label from reel Cpedpewh U Avofx Afneu

Condition: used, Year of construction: 1986, Overview  This isobaric glass bottle filler was manufactured in 1986–87 by German company Krones and commissioned in 1988. It is a Krones Mecafill VK2V K126-308 with 96 filling valves and 18 capper heads for crown cork closures. The filler has been continuously upgraded with new technology, including a Siemens S7-300 control system (2009) and a retrofitted Krones capper (2004). It is suitable for beer, cider, soft drinks, cocktails, lemonade, carbonated and still water. The machine is still in production (can be seen on the video) and will be dismantled by the end of September 2025. Spare parts from the warehouse are included. Technical data  Capacity: 30,000 bph (all formats) Formats: 0.275 L, 0.33 L, 0.5 L (total 9 formats) Filling valves: 96 Capping heads: 18 Closure type: Crown cork Direction: Clockwise (L–R) Diameter: 2,880 mm Filling system: Isobaric, with double evacuation, HDE (hot water injection), and splinter washout Products: Beer, alcohol-free beer, cider, cocktails, lemonade, soft drinks, carbonated water, still water Control system: Siemens S7-300 PLC (2009 retrofit) Scope of Delivery  Filler and capper | Krones | Mecafill VK2V K126-308 | 1986–87 (commissioned 1988) | 96 filling valves, 18 capper heads, crown cork closures, clockwise, diameter 2,880 mm, crown cork transport system Control system | Siemens | S7-300 | 2009 | PLC retrofit Safety fences Spare parts   Cpodpfx Afexc H Tmenou

Condition: used, Year of construction: 2018, Overview  This glass bottle filler and capper was manufactured in 2018 by the Italian company GAI. The MLE 661 Bier model is a compact and precise filling monoblock designed for small to medium-sized breweries and beverage producers. It features Pick & Place technology for pilfer-proof aluminum screw caps (30x20 mm) and an electronic fill height adjustment system for easy format changes. With a capacity of up to 900 bottles per hour, the unit is suitable for bottles ranging from 0.25 L to 1.0 L. The machine is in very good condition and ready for operation. Technical data Filling system: Isobaric (for beer and other carbonated beverages) Capacity: 900 bottles/hour Bottle formats: 0.25 L – 1.0 L Closure type: Pilfer-proof aluminum screw caps (30x20 mm), Pick & Place system Electronic fill height adjustment Stainless steel construction Cedpfexn A R Esx Afnepu

Condition: used, Year of construction: 2017, Overview This complete filling line for beverage cans was manufactured 2017 by the german manufacturer KHS.  The line is designed for beverage production, handling up to 25,000 b/h and is in a good condition.    Technical Data Capacity: 25,000 bph (at 0,5L) Filling product: carbonated soft drinks and beer Bottle Formats: 500ml 211/202 Cap Formats: 211/202 Packaging formats: tray with foil Application: CSD + beer condition: good technical condition, dismantled   Scope of Delivery Bulk can depalletizer | LINKER | DPG-500 | 2012 Can inspection | TransTech | Hysek CanCheck | 2012 Can conveyor | LINKER / KHS | Conveyor RC | 2012 Rinser | LINKER / KHS | Triplex Rinser TR | 2012 Flash pasteurizer | KHS | Innopro 140/14/85 | 2012 Filler | KHS | Innofill Can DVD | 2017 Seamer | Ferrum | F08 | 2012 Lid feeder | NSM | Lidserver A30 | 2017 Conveyor | KHS | Innoline BTR | 2012 Filling height control | KHS | Innocheck CUB | 2012 Blowing | Europool | – Packing machine | KHS Kisters | SP0502 | 2012 Pack conveyor | KHS | Innoline GTR | 2012 Handle application | KHS | CSM 050-2 | 2012 Packing machine | KHS | Innopack 035 B2 + FS A-L | 2012 / 2017 Palletizer | KHS | Innopal PBL1N1 | 2012 Stretcher | SIAT | MFP | 2017 Pallet conveyor | KHS | Innoline PTR Cjdpeyb R Srjfx Afnjpu

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers. The line is suitable for still and carbonated soft drinks and includes a blow moulder with compressed air generator, rinser/filler/capper, labeller, packer, palettizer, stretcher, conveyors inspection systems, mixing- and CIP-unit. The line reaches up to 8,000 bph at 1,5 l and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 8,000 bph at 1,5 l  Formats: 0,5 l and 1,5 l bottles Filling product: Water and carbonated soft drinks Closure system: Plastic screw caps Sport caps Packing: Shrink pack: 3x2 formation at 0,5 l and 1,5 l PET bottles Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Scope of Delivery  Blow moulder: SIPA, year 2002 Compressed air generator: Kaeser, year 2002 Rinser/filler/capper: Procomac, year 2000 Number of rinsing nozzles: 24 Number of filling valves: 24 Number of capping heads: 6 Labeller: Futura, year 2000 For the labelling of opp labels with hot melt Inspection device: Logics & Controls, year 2000 For the control of fill height, capping and label Shrink packing machine: Krones TFS Variopack, year 2001 Handle applicator: Twinpack, year 2001 Tray labeller: Logopack, year 2001 Pallet stretcher: Born, year 2001 Palletizing unit: Levanti / Profipack CIP-unit: Corosys, year 2012 CO2-degassing unit: Corosys, year 2012 Cpsdpfewq Sfgjx Afnsu

Condition: used, Year of construction: 2016, Overview This Mondial LD 8-1 EAGLE/C atmospheric monoblock filling machine was manufactured by Italian manufacturer CIMEC in 2016. It is suitable for filling non-carbonated beverages such as beer with bottle fermentation, lemonade or soda and combines an 8-valve filling station with a single crown capping head. The filler is available immediately. Technical details  Output: 1,800 bottles/h Filling system: Atmospheric Application: Beer with bottle fermentation, still drinks Formats: Longneck 33cl Bottle diameter: 60 mm Bottle height: 227 mm Cap type: Crown cork 26 mm Output: 5 kW Compressed air requirement: 7 bar Dimensions (L×W×H): 165 × 140 × 240 cm Cedow Inpujpfx Afnopu

Condition: used, Year of construction: 2012, Overview  This set of ten stainless steel isobaric tanks was manufactured between 2012 and 2024 by the Spanish company EtD (Talleres Esteban Tolosa). The lot includes five fermenters and three lagering tanks, all pressure-rated at 3 bar. All tanks are in good condition, fully functional, and well maintained. The newer 2024 models have seen minimal use. The tanks can be purchased as a complete set or individually upon request. Technical data  Type: Isobaric fermenting and lagering tanks Manufacturer: EtD (Talleres Esteban Tolosa) Years of Manufacture: 2012 – 2024 Total Units: 10 (7 fermenters + 3 lagering tanks) Working Pressure: 3 bar Material: AISI 304 stainless steel Scope of Delivery  Fermenting Tanks 3× 45 hL (net 45, gross 47) | EtD | 2012 2× 50 hL (net 50, gross 55) | EtD | 2024 2× 50 hL (net 50, gross 55) | EtD | 2020 Lagering Tanks 3× 50 hL (net 50, gross 55) | EtD | 012 | Horizontal isobaric with carbonation stones Csdjyb S A Sopfx Afnjpu

Condition: used, Year of construction: 1986, Overview  This isobaric glass bottle filler was manufactured in 1986–87 by German company Krones and commissioned in 1988. It is a Krones Mecafill VK2V K126-308 with 96 filling valves and 18 capper heads for crown cork closures. The filler has been continuously upgraded with new technology, including a Siemens S7-300 control system (2009) and a retrofitted Krones capper (2004). It is suitable for beer, cider, soft drinks, cocktails, lemonade, carbonated and still water. The machine is still in production (can be seen on the video) and will be dismantled by the end of September 2025. Spare parts from the warehouse are included. Technical data  Capacity: 30,000 bph (all formats) Formats: 0.275 L, 0.33 L, 0.5 L (total 9 formats) Filling valves: 96 Capping heads: 18 Closure type: Crown cork Direction: Clockwise (L–R) Diameter: 2,880 mm Filling system: Isobaric, with double evacuation, HDE (hot water injection), and splinter washout Products: Beer, alcohol-free beer, cider, cocktails, lemonade, soft drinks, carbonated water, still water Control system: Siemens S7-300 PLC (2009 retrofit) Scope of Delivery  Filler and capper | Krones | Mecafill VK2V K126-308 | 1986–87 (commissioned 1988) | 96 filling valves, 18 capper heads, crown cork closures, clockwise, diameter 2,880 mm, crown cork transport system Control system | Siemens | S7-300 | 2009 | PLC retrofit Safety fences Spare parts   Codpfx Aexc H Tgefnjpu

Condition: used, Year of construction: 2020, Overview  This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Technical data  Capacity: 2,000 cans/hour at 0.33 L 1,500 cans/hour at 0.5 L Compatible formats: Standard and Sleek cans (not suitable for Slim cans) Filling system: Isobaric (for carbonated products) Product types: Beer, cider, soft drinks, or similar beverages Condition: Used – as new (only 1,500 cans filled) Csdoxnmv Espfx Afnepu

Condition: used, Year of construction: 2017, Overview  This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer in glass bottles with high precision and versatility. It supports both screw caps and crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. Suitable for bottle sizes between 0.25 L and 0.75 L, the filler achieves a performance of up to 1,500 bottles per hour at 0.33 L. The machine is in very good condition and ready for operation. Technical data Capacity: 1,500 bottles/hour (based on 0.33 L format) Bottle formats: 0.25 L – 0.75 L Closure types: Screw caps and crown caps Filling system: Isobaric (for beer and carbonated beverages) Product types: Beer and other carbonated drinks Cpodpfx Afsxn A Rlsneu

Condition: used, Year of construction: 2005, Overview This sleeve applicator was manufactured in 2005 by the French company Sleever International. The model Powersleeve was used for applying shrink sleeves on two 1.5 L bottles in twin-pack format (2×1.5 L). The machine is still installed and connected but no longer in use, and will be available from December 20, 2025. Technical data Capacity: 12,000 bph Formats: Twin pack (2 × 1.5 L) Application: Cider, carbonated beverages, lemonades, sodas Machine dimensions: 1000 × 155 × 250 cm Power supply: 6 kW Condition: Good, functional when disconnected Cpsdpfx Afoxqn R Njnsu

Condition: used, Year of construction: 2011, Overview This isobaric filler was manufactured in 2011 by the German company ICS (Industrial Control Systems). The multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 model is a high-precision filling system equipped with 24 electro-pneumatic filling valves featuring double pre-evacuation, ensuring low oxygen pickup and optimal filling performance for beer and other carbonated beverages. The monobloc system includes both a 6-head crown capper and a 6-head screw capper, offering flexible closure options. The machine has 7,200 operating hours, is in very good condition, and offers a maximum capacity of 6,000 bottles per hour. Technical data Application: Beer and other carbonated beverages Capacity: 6,000 bph Filling Valves: 24, electro-pneumatic with double pre-evacuation (VK-EP-2V) Ring Bowl Diameter: 960 mm Capping Heads: 6 × crown cork (KK) + 6 × screw cap (SV) Pitch: 125 mm Operating Hours: 7,200 h Cjdpfx Afeyb Silenspu

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated into pasteurizer control system Flash pasteurizer Kreuzmayr PAS-900 Capacity: 750 - 1,000 l/h Heated with steam Fully automatic Automatic cleaning with Hot water steam acid caustic With tubular heat exchanger Automatic filler Linapack LFS-1000 Duplex with Siemens PLC Seven Station system motorized magazine with pick and place system to supply pouches Opening of the pouches with vacuum gripper Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low Sealing of pouches Sealing of pouches Cooling of the seal Pouch discharge Check weigher Cooler and dryer for pouches Cooling in water bath With UV lamps for desinfication Drying by blower, five nozzles Conveyors and collection table Cpsdpevptt Rjfx Afnsu