Used Chamber Furnace for sale (2,754)

Condition: excellent (used), Despite its age, the Gerco dryer is in exceptionally good, almost new condition. The reason for this is its very limited use: the unit was only used for two to three days per year and is therefore very well preserved. Hnsdpfxeztwzie Alyer Another major advantage: with this dryer, you can directly vacuum the dried material onto the machine. This eliminates the need for additional conveying equipment on your machine. A corresponding conveying system alone would cost over €1,000 if purchased separately. With the Gerco dryer, you can save on this investment. As a result, you not only receive a very well-maintained dryer, but also a practical and cost-effective solution for material handling.

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Hedszuabzopfx Alysnr Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Condition: As new Category ID: 34 Type ID: 4293 Type: Nitriding furnace If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Hodoztrbwepfx Alyjnr

Condition: ready for operation (used), Year of construction: 1977, Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing furnace length: 5000mm, cooling zone length: 5700mm, overall furnace system length: 15,100mm, loading height of the system: 700mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Hnsdoztrbkjpfx Alyor

Condition: used, TECHNICAL DETAILS Quenching tank for stirring oil quenching Hnodpfx Ajug U Thjlyor - power : 0.25 [kW] - voltage : 3 x 380 [V]

Condition: refurbished (used), Year of construction: 1986, Chamber filter press, completely overhauled, with stainless steel lining, 82 PP (food-grade) filter plates, 30 mm cake thickness, press capacity approx. 1100 liters, filter area 96 m², new filter cloths fitted, max. 15 bar feed pressure possible, closed discharge via 2 diagonal corner holes, automatic plate transport and optional stainless steel filter cloth washing system with 100 bar high-pressure pump, with stainless steel base frame for height adjustment, control cabinet Hnedpfxen Dw Nkj Alysr

Condition: new, Filter cloths for all filter presses in all sizes and qualities, short delivery times, ask us Location is 58762 Altena Hsdpfxsg Azmmj Alysnr

Condition: new, Filter plates (250 - 1200 mm) for all filter presses in all sizes and qualities, short delivery times, ask us Hnsdpfxeikl Uis Alysr Location is 58762 Altena

Condition: used, Year of construction: 1997, 2 pcs of furnace oil power transformers with tap changer; manufacturer SGB Germany; 28MVA; 22kV/430-150V; 735-290A at 22kV; 37600-42620A at 430-150V, Dd1, OFWF, functional, design documentation, rutine test reports, year of manufacturer 1997 and 1999 Hjdpfx Aszt Nryolysnr

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN 04/17, Take your clinic, rehabilitation centre, or sports facility to the next level with the KrioSystem KR-2010 Whole-Body Cryochamber, a premium cryotherapy solution from one of Europe's leading cryogenic technology manufacturers. Designed for high-performance medical, rehabilitation, and sports recovery applications, the KR-2010 treats 20–30 patients per hour while accommodating 2–4 patients simultaneously at therapeutic temperatures ranging from -110°C to -160°C. Powered by liquid nitrogen and equipped with advanced safety systems, including oxygen monitoring and emergency alarms, this medical device delivers safe, effective, and clinically proven whole-body cryotherapy for pain relief, injury recovery, arthritis management, improved circulation, muscle relaxation, and enhanced wellbeing. Hjdpfezq At Eox Alyenr Ready to ship container.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Equipment: CE marking, type plate available, Induction furnace for heating steel with dimensions up to 550mm in length, 100mm in width, and 20mm in thickness. The furnace is connected to a feeder for small rods with dimensions from 10x10 to 22x22 and a length of up to 300 mm. The hopper feeder sorts the parts and automatically loads the inductor with consecutive pieces for heating. The feeder is ideal for producing large nails, screws, etc. Its operation can be seen in a YouTube video. The efficiency is very high. For small elements, heated parts at 1100 degrees are retrieved every 6 seconds. We have two inductors for the furnace to heat materials with thicknesses up to 20mm and up to 16mm. It is possible to modify the furnace to suit your needs. Replacing the inductor with other sizes costs approximately 3000 EUR. The machine is very versatile in terms of the sizes of heated products. Hnedpfx Ajw Hqldslyjr It is possible to heat flat bars, round rods, or square rods.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of chambers: 1, actuation type: electric, Equipment: CE marking, documentation/manual, In-stock item, immediately available -Tmax 1350°C -Usable internal volume (L x W x H) (mm) 600 x 500 x 500 -Batch weight 300 kg -External dimensions (L x W x H) (mm) 4200 x 2500 x 3500 -Footprint (L x W x H) (mm) 5000 x 5000 x 4000 -Weight (net) 13000 kg -Total connected load 125 kVA -Connection voltage 400 V -Current fuse 250 A -Control system: Stange SE 607 -Documentation Includes: Hnjdozr U Anspfx Alyor -Protective gas buffer tank -Vacuum pump connection -4-flap design for cooling, allowing the flow direction of the gas stream to be adjusted horizontally or vertically. -Connection for liquid nitrogen, allowing the oven to cool down to -80°C. -Internal insulation made of graphite felt, protected and reinforced with CFC. We will build a second identical oven starting at the end of the year. You can find the detailed description as a PDF in the advertisement! We offer new and used industrial ovens. Inspection in our warehouse is available upon request! Industrial oven, vacuum oven, vacuum furnaces, vacuum hardening oven, hardening furnaces, sintering oven, sintering furnaces.

Condition: new, Year of construction: 2024, functionality: fully functional, Szárítórendszer - 1T 184 TPR Modell, (Mozgatható Szállítószalagos) Hjdpfx Alsua D U Ieysnr Kiváló minőségű szárítórendszert kínálunk, mely ideális fafűrészpor, termény, újrahasznosítandó hulladék, ételipari alapanyagok szárítására. A szárítógép teljesen új állapotban van, eredeti csomagolásában.

Condition: used, Year of construction: 2010, functionality: fully functional, temperature: 1,700 °C, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, Important Pricing Information: We offer flexible terms to suit your needs. The standard price is €700,000. Used High-Temperature Vacuum Furnace PVA TePla COV 733 RS Furnace chamber made entirely of stainless steel, double-walled for water cooling. Horizontal design for easy loading and unloading and good accessibility for maintenance and servicing. Internal graphite box for precise guidance of process gases. Equipped with post-cleaned graphite components. Automatic control of the entire process sequence. Hedjzkwp Ijpfx Alyjnr Usable batch chamber (Width x Height x Length): 840 x 815 x 1000 mm. Total length of the graphite box: approx. 1100 mm. Maximum operating temperature under partial pressure: 1500 °C. Under vacuum: 1700 °C. Temperature uniformity: ± 10 K. Temperature fluctuation in steady state: ± 5 K. Process pressure range: 1×10-2 < p < 1040 mbar. TECHNICAL SPECIFICATIONS COV 733 RS Operating temperature: max. 1700 °C Max. load dimensions: 840 x 815 x 1000 mm Useful volume: approx. 685 L Temperature uniformity: ± 10 K Power supply: 3 x 400 V (50 Hz) Max. permissible voltage fluctuations: ± 5 % Installed heating power: max. approx. 190 kW Pump station - Final pressure in an empty, clean, and cold furnace: < 1×10⁻² mbar - Electrical power of the pump station: approx. 14 kW Leak rate: < 5×10⁻³ mbar·L/s Cooling water - Cooling water flow rate: approx. 150 L/min - Cooling water temperature: 20 ≤ TCW ≤ 30 °C - Cooling water pressure: 2 ≤ PCW ≤ 4 bar Cooling water quality requirements according to specification: PW 800 943 ND. Gas supply: Compressed air: for valve actuation (PVA) 4 ≤ PVA ≤ 5 bar A compressed air maintenance unit must be provided by the Customer. Nitrogen: Gas inlet pressure (PN2) 5 ≤ pN2 ≤ 7 bar Hydrogen: Gas inlet pressure (PH2) 5 ≤ pH2 ≤ 7 bar Space requirements - Width x depth x height to be determined in consultation with the Customer - Floor area to be determined in consultation with the Customer Foundation: level ground, no special preparations required

Condition: excellent (used), Memmert GmbH Climate Testing Chamber / Temperature Testing Chamber Used Memmert climate testing chamber, type CTC 256, for temperature and climate testing. This unit is suitable for environmental simulation, material testing, quality assurance, research and development, as well as stress and aging tests. Technical data: Manufacturer: Memmert GmbH + Co. KG Type: CTC 256 Test chamber volume: approx. 256 liters Test chamber dimensions: approx. 640 x 597 x 670 mm (W x D x H) Housing dimensions: approx. 898 x 1100 x 1730 mm (W x D x H) Weight: approx. 320 kg Temperature range: -42 °C to +190 °C Heating rate: approx. 3.35 K/min Cooling rate: approx. 2.8 K/min Humidity function available Refrigerant: R404A Rated cooling capacity: 2.53 kW Max. operating overpressure: 30 bar Mains connection: 3/N/PE AC 400 V / 50 Hz Rated power: approx. 7.0 kW Rated current: approx. 10.6 A Hnodpfx Aozlidtslyjr Equipment Programmable controller Viewing window Stainless steel interior Air circulation system Ethernet interface Printer connection Alarm contact 230 V service socket Shelf insert Documentation available Scope of delivery Memmert CTC 256 climate testing chamber Shelf insert Water canister Documentation / test report Accessories as shown in the pictures Condition Used, optical condition according to the pictures. (Changes and errors in the technical data are subject to change!) Subject to prior sale.

Condition: excellent (used), WEISS TECHNIK SC 1000 Salt Spray Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SC 1000 Machine Type: Salt Spray Test Chamber / Corrosion Test Chamber Test Chamber Volume: approx. 950 liters For sale is a used Weiss Technik SC 1000 salt spray test chamber. The system was developed for professional corrosion, salt spray, and condensation water testing and is ideal for testing laboratories, the automotive industry, research institutions, and industrial quality assurance. The system is equipped with a programmable color touch control panel, an Ethernet network interface, and a test chamber volume of approx. 950 liters. Technical Data: Manufacturer: Weiss Umwelttechnik GmbH Model: SC 1000 Year of Manufacture: 2015 Test Chamber Volume: approx. 950 liters Power Supply: 1/N/PE AC 230 V ±10 % / 50 Hz Rated Power: 2.6 kW Rated Current: 11.3 A Compressed Air Connection: 4–10 bar (max. 10 bar) Deionized Water: 3–5 bar Control System: Programmable color touch control panel Ethernet network interface RS232 interface Hedpfozlgyrsx Alysnr Dimensions: External Dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Test Chamber Dimensions (W × D × H): approx. 1,560 × 570 × 1,190 mm Test Chamber Volume: approx. 950 liters Equipment: 950-liter test chamber Programmable color touch control panel Ethernet network interface RS232 interface Salt spray testing Condensation water testing Heated compressed air humidifier Integrated brine tank Compressed air connection Deionized water Exhaust connection Transport Data: External Dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Transport Weight: approx. 220 kg Condition: Used The system was last used in an industrial setting. Optical condition as shown in the pictures. Scope of Supply: Weiss Technik SC 1000 salt spray test chamber Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 060308, functionality: fully functional, power: 6.9 kW (9.38 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 40 °C, number of chambers: 1, control type: PLC-controlled, Equipment: CE marking, documentation/manual, GIARDINA MOS® 3D Static Microwave Drying Chamber Professional static drying system designed for the drying of coated wooden components, particularly for water-based coatings. The GIARDINA MOS® 3D technology uses microwave energy for controlled and homogeneous three-dimensional drying. After removal of the water component from the coating, a low-temperature hot-air circulation phase completes the drying and curing process. The system is suitable for three-dimensional and assembled wooden components, including furniture, chairs, window and door components, profiles and turned parts. Technical data: Manufacturer: GIARDINA FINISHING S.r.l. Model: MOS® 3D Year of manufacture: 2006 Serial number: 060308 Electrical power: 6.9 kW Supply voltage: 400 V Frequency: 50 Hz Rated current: 19 A PLC controlled Hnjdpfxjztvf Tj Alysr Air recirculation motor: 3 kW / 4 HP CE marked Original operating and maintenance documentation as well as electrical diagrams are available. The machine was recently taken out of production and is currently dismantled and stored in a dry warehouse. It was in regular operation prior to being taken out of service.

Condition: excellent (used), ERICHSEN CORROCOMPACT 618-1000 Corrosion Testing System Manufacturer: ERICHSEN GmbH & Co. KG Type: CORROCOMPACT 618-1000 Year of Manufacture: 2017 Machine Type: Corrosion Testing System / Climate Change Testing System Test Chamber Volume: 1,000 liters For sale is a used ERICHSEN CORROCOMPACT 618-1000 corrosion testing system with a separate air conditioning unit and Siemens SIMATIC touch control. The system was developed for professional corrosion, climate change, salt spray, and condensation tests and is ideally suited for testing laboratories, the automotive industry, research institutions, and quality assurance. Technical Data: Model: 618-1000 Series: CORROCOMPACT 617 Serial Number: 16855/005 Test Chamber Volume: 1,000 liters Power Supply: 3+N+PE AC 400 V / 50 Hz Connected Load: 5 kVA + 9 kVA (air conditioning unit) Fuse Rating: 3 × 32 A Compressed Air Connection: 6–10 bar Deionized Water Connection: 3–6 bar Control: Siemens SIMATIC HMI Touch CPU Version: 2.2.3 HMI Version: 2.2.3 Air Conditioning Unit: Manufacturer: ERICHSEN Type: VS-Bo-1,1-40-L-S Year of Manufacture: 2014 Serial Number: 14-2430 Refrigerant: R507 Connected Load: 3.3 kW Max. Operating Current: 8.4 A Compressor Power: 1.3 kW Evaporator Fan: 0.18 kW Condenser Fan: 0.28 kW Steam Humidifier: 1.6 kW Heater: 5 × 0.2 kW Dimensions: External Dimensions (W × D × H): approx. 2,100 × 1,350 × 1,670 mm Height with Hood Open: approx. 2,500 mm Internal Dimensions (W × D × H): approx. 1,190 × 815 × 1,040 mm Equipment: Siemens SIMATIC Touch Panel Separate Air Conditioning Unit 1,000-Liter Test Chamber Climate Change Testing Salt Spray Testing Condensation Testing Automatic Test Programs Compressed Air Connection Deionized Water Connection Salt Solution Connection Exhaust Connection Floor Drain Supported Test Standards: DIN EN ISO 11997-1 DIN EN ISO 6270-2 AT ISO 11503 ASTM D2247 VDA 621-415 B P-VW 1210 DIN EN ISO 9227 NSS VDA 233-102 DIN EN ISO 6270-2 AHT DIN EN ISO 9227 AASS DIN EN ISO 9227 CASS ASTM B117 D171058 DIN EN ISO 6270-2 CH DIN 50958 ISO 9227 BS 3900 Part F2 DIN 55991 Transport Data: Test Chamber (W × D × H): approx. 2,100 × 1,350 × 1,670 mm Air Conditioning Unit (W × D × H): approx. 1,700 × 900 × 1,900 mm Weight of Test Chamber: approx. 600 kg Weight of Air Conditioning Unit: approx. 500 kg Total Weight: approx. 1,100 kg Condition: Used The system was last used in an industrial setting. Optical condition according to the pictures. Scope of Delivery: ERICHSEN CORROCOMPACT 618-1000 Air Conditioning Unit VS-Bo-1,1-40-L-S Siemens SIMATIC HMI Touch Accessories according to the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Hjdpfjzk A Ebjx Alyonr Subject to change, errors and prior sale.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 13276/1694, type of input current: three-phase, total height: 2,500 mm, total width: 3,000 mm, total length: 5,000 mm, input voltage: 380 V, control voltage: 24 V, input current: 250 A, input frequency: 50 Hz, Equipment: documentation/manual, Inductotherm 150 kW induction furnace; comes with 3 new crucibles. Hedpfozfif Rsx Alysnr Aluminum capacity: 60 kg, melting time: 30 min. Bronze capacity: 200 kg, melting time: 60 min.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Multivac P700 Double chamber vacuummachine The MULTIVAC P 700 double chamber machine - high output even at the largest product size. Exceptionally modular, robust, and user-friendly. Manufacturer: Multivac Model: P700 Hedpfozp E Atox Alyonr Year: 2021 Vacuum pump: Busch 300m3/h Seal bar length: 1.100 mm (x4) Chamber dimensions LxWxH: 1.100x700x250 mm Power: 400V / 50Hz / 6kW Machine dimensions LxWxH: 2.600x1.000x1.145 mm Machine weight: 850 kg.

Condition: good (used), Multivac C500 Double Chamber vacuummachine This one with vacuum and gas flushing system. Double chamber machines from MULTIVAC are easy to operate, clean and service. They offer the highest output on the smallest footprint and also provide impressive performance over their entire machine life thanks to their production output and pack quality. The evacuation and gas flushing processes are pressure-controlled and thus guarantee reproducible packing results. MC 06 machine control with precise vacuum measurement in the chamber. Brand: Multivac Model: C500 Power: 400V / 50Hz / 3Phase / 7kW Vacuum Pump: Busch 160m3/h Hsdpfxezp Eh Nj Alysnr Seal bar length: 660 mm (x4) Chamber Dimensions: 740×660 mm (x2) Machine dimensions (LxWxH): 1.600x950x1.060 mm Machine weight: 650 kg.

Condition: ready for operation (used), Brand: HERAEUS Maximum temperature: 1200 °C Hodpfsy Nlfdex Alyenr Internal furnace dimensions: 390 x 200 mm, depth: 650 mm

Condition: excellent (used), Memmert Type: CTC 256 Memmert Climate Test Chamber CTC 256 Temperature & Humidity Test Chamber Industrial Quality For sale is a high-quality climate test chamber / temperature test chamber from the manufacturer Memmert, model CTC 256. The unit originates from professional use and is ideally suited for laboratories, Hsdpfx Ajy D Ni Aolyenr industry, research, development as well as quality assurance. The Memmert CTC 256 is designed for precise simulation of temperature and climatic conditions. It enables both cooling and heating processes and – in this configuration – humidity control. This makes the unit perfect for material testing, aging tests, climatic stress tests, and long-term experiments under defined environmental conditions. Thanks to the integrated control system, complex test programs with temperature and time sequences can be set. The forced air circulation system ensures uniform temperature distribution in the chamber interior. Via the available interfaces, measurement data can be documented and processed externally. Features: Temperature and climate test chamber (heating & cooling) - Humidity control Electronic controller with programmable function Forced air system for even temperature distribution Internal protocol memory USB and Ethernet interface Additional 230 V socket Feed-through (side) Water container system (humidification/condensate) Mobile on castors Technical Data: Manufacturer: Memmert Model: CTC 256 Device type: Climate test chamber Temperature range: approx. -42 °C to +190 °C Internal volume: approx. 256 liters Operating voltage: 3N~ 400 V / 50 Hz Current consumption: approx. 10.6 A Power consumption: approx. 7000 W Protection class: IP20 External dimensions (approx.): 898 x 1730 x 1100 mm (W x H x D) Internal dimensions (approx.): 640 x 670 x 597 mm (W x H x D) Weight: approx. 300–350 kg Condition: used Scope of delivery: (see photo) Memmert CTC 256 climate test chamber Removable shelves Water canister Documents Delivery as shown (Specifications and technical data are subject to change and error!) If you have any further questions, we would be happy to assist you by phone.

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, running hours: 4748 h Offered for sale is a used temperature test chamber from Weiss Technik. The chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Explanation of the model designation: T = temperature test chamber 1000 = approx. 1000 liter volume 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Equipment features: - Stainless steel interior - Recirculation air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A / R23 Weight: approx. 1200 kg Important safety information for buyers: The following processes are carried out on the chambers we offer before delivery: 1. Function check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) We are happy to answer any further questions by phone. Hedpfx Aley Dciijyjnr

Condition: excellent (used), Memmert Type: UF 450plus Air circulation: forced convection Temperature Temperature range: +20 °C to +300 °C Operating range: at least +10 °C above ambient temperature Setting accuracy: – up to 99.9 °C: 0.1 °C – from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-conductor) Interior and capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of inserts: 8 Load per insert: 30 kg Maximum total load: 300 kg Interior: stainless steel, all-round heating External dimensions and weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and regulation Control: ControlCOCKPIT TwinDISPLAY Controller: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculating air: adjustable in 10% steps Fresh air: electronically adjustable Exhaust air: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and undertemperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Hsdpfx Aloy T Ictjysnr Rear has 2 openings each with approx. 12 cm diameter Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.