Used Chamber Furnace for sale (2,821)

Year of construction: 1995, condition: ready for operation (used), Two walk-in climate chambers including Wolf burner are available. Heating capacity: 105kW, heating medium: oil/gas, max. oil throughput: 14.9kg/h, air volume flow: 2.78m³/h, max. external delivery pressure: 400Pa, control: PLC. Documentation available. An on-site inspection is possible. Dedpfx Aeyit Hbocpocn

Condition: ready for operation (used), Year of construction: 2005, The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible. Dodpezhw Sdsfx Acpecn

Condition: excellent (used), ESPEC Climate Testing Chamber PL-3KPH Device Data Manufacturer: ESPEC Type: PL-3KPH Design: Climate Testing Chamber Cooling: Air-cooled Description Used climate testing chamber from ESPEC. Suitable for temperature and humidity testing. Used in research, development, and quality assurance. Operating Status Display: STOP / ready for operation. Technical Data Model: PL-3KPH Test chamber volume: approx. 400 liters Temperature range: -40 °C to +180 °C Temperature change rate (heating): approx. 3.4 K/min Temperature change rate (cooling): approx. 1.7 K/min Temperature stability (-40 °C to +100 °C): ±0.3 K Temperature stability (+100.1 °C to +150 °C): ±0.5 K Temperature stability (+150.1 °C to +180 °C): ±1.0 K Humidity range: 20 to 98 % RH Humidity stability: ±2.5 % RH Dimensions Internal (W x H x D): 600 x 850 x 800 mm External (W x H x D): 1010 x 1690 x 1195 mm Electrical Data 400 V / 3~ / 50 Hz Refrigeration System Refrigerant: R404A Air-cooled (no external water connection required) Weight approx. 350 kg Equipment Touchscreen control panel Program and constant operation BTHC temperature and humidity control Observation window Stainless steel test chamber Internal lighting Cable gland Djdpfoy H H Iuex Acpecn Overheating protection Hour meter Industrial design Scope of supply ESPEC Climate Testing Chamber PL-3KPH Scope of supply as shown in the images Service before delivery (optional) Functional test Refrigerant service Leakage test Test run with protocol Condition Used. Condition see images. Note Loading and transport can be arranged upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), ESPEC TSA-72EL-A Temperature Shock Chamber Manufacturer: ESPEC Corporation Type: TSA-72EL-A Machine Type: Temperature Shock Chamber / Thermal Shock Chamber (2-Zone) Design: Water-cooled For sale is a used ESPEC temperature shock chamber, type TSA-72EL-A. This unit is suitable for reproducible temperature cycling and thermal shock testing in research, development, quality assurance, as well as for testing electronics, automotive components, aerospace parts, and materials. The switchover between the hot and cold chambers is performed automatically via a 2-zone damper system. Technical Data Dedpszhkfqefx Acpjcn Test chamber volume: approx. 70 liters Internal dimensions (W x H x D): 410 x 460 x 370 mm External dimensions (W x H x D): 1,310 x 1,900 x 1,470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Precooling temperature: up to -75 °C Heating time: ambient temperature to +200 °C within approx. 15 minutes Cooling time: ambient temperature to -70 °C within approx. 40 minutes Temperature recovery time: ≤ 5 minutes Max. test load: 30 kg evenly distributed Cable entry: Ø 50 mm Compressed air supply: 0.4 to 0.7 MPa (4 to 7 bar) Refrigeration system / Power supply Refrigeration system: Mechanical cascade refrigeration system Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Condenser: Water-cooled Mains connection: AC 380 / 400 / 415 V 3 phases / 50 Hz Max. current draw: 45 A Equipment 10.4" TFT color touchscreen PID temperature control Program memory (RAM/ROM) Trend graph Alarm history RS-485 interface Eco mode Automatic defrost Vertical sliding door Stainless steel test chamber 2 stainless steel test inserts Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulation fan Pneumatic damper switchover Cable entry Ø 50 mm Applications Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Materials testing Component testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply ESPEC TSA-72EL-A Temperature Shock Chamber 2 stainless steel test inserts Accessories as shown in the pictures Scope of supply as pictured. Subject to change, errors and prior sale.

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) Dcsdpfoziizysx Acpon (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Dcedjzii A Rjpfx Acpen Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. Dcodezil T Sepfx Acpjn With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. Dcodpfx Acszimgaspon It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber Water-Cooled The Weiss climate chamber WK11-600/70/5 with approximately 600 liters usable volume is suitable for temperature and humidity testing, as well as for the conditioning of samples and materials in a range from −70 °C to +180 °C. Simcon/32 - Net controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Feedthroughs: 2x R1 NW 125 mm ∅ Dcedpfx Ajzimg Hjcpjn 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Temperature Test Data: Temperature range: -70 °C to +180°C Temporal temperature deviations at the center of usable space: ±0.1 to ±0.5 K Spatial temperature deviations: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Heat compensation: At +20 °C: 5000 W At -20 °C: 5000 W Climate Test Data: Temperature range: +10 to +95 °C Humidity range: 10 to 98% r. H. Temporal temperature deviations at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviations: ±0.5 to ±1 K Temperature gradient: 1 to 2 Humidity fluctuation (temporal, center of usable space): ±1 to ±3% r. H. Heat compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Main fuse (to be provided by customer): 32 A slow-blow Permissible test material weight: Total load of racks: 80 kg Test chamber floor: 80 kg, Insert rack: 40 kg Weight: 675 kg Refrigerants: R452A / R23 Important Note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following points are completed on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions over the phone.

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Dcsdozizl Rspfx Acpjn Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), CTS Type: C-40/350 Air-cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ ±3.0% r.h. over time Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation, and without additional accessories. Options may influence performance data. Technical Specification: - Refrigeration unit: Air-cooled, low-noise, fully hermetic, infinitely variable performance adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber floor load: 150 kg/m² - Shelf: Stainless steel, support surface 620 x 600 mm - Maximum load per shelf: 35 kg - Total load with maximum number of shelves: 100 kg Dcedpfx Acjzizmzopon Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for external test sample control Dimensions: - Test volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Condition: excellent (used), Year of construction: 2018, - for unattended operation - for temperatures from 100 °C to 300 °C - external dimensions: 1500 x 2773 x 2096 mm (W x H x L) - clear internal dimensions per chamber: 800 x 800 x 1100 mm (W x H x L), height with beams = 700 mm - maximum batch dimensions: 700 x 600 x 1000 mm (W x H x L); maximum weight: 500 kg Dodpfx Aezbnnwscpscn Connection values per chamber: circulation = 3.0 kW (1 unit); electric heating = 30 kW (1 control group) Temperature accuracy +/- 5 K at 150 °C, 250 °C, 300 °C adjustable up to +/- 1.5 K temperature accuracy depending on the batch geometry 1 Protherm 500 program controller

Condition: excellent (used), Weiss WT-1300/70/15 Temperature Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Water-cooled temperature testing chamber with touch panel control for temperature tests in research, development, quality assurance, and industry. Technical Data Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate (heating): 15 K/min Temperature change rate (cooling): 10 K/min Temperature deviation (over time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 2 K Test chamber dimensions: Height 920 mm Width 1100 mm Depth 1330 mm External dimensions: Height approx. 2050 mm Width approx. 1300 mm Depth approx. 3200 mm Permissible test specimen load: Test chamber floor: 150 kg Insert shelf: 50 kg Electrical Data Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated current: 63 A Rated power: 44 kW Refrigeration System Refrigerant R404A: 14.0 kg Refrigerant R23: 5.4 kg R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standing pressure: 18.5 bar Equipment Touch panel control Stainless steel test chamber Multiple insertion levels Side access port Heated door seal Water-cooled refrigeration unit CEE connection CE marking Weight: approx. 1500 kg Condition Used equipment from industrial application. Optical condition as shown in the pictures. For the safety of our customers, the following work will be carried out on the offered climate chambers beforehand: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of delivery: see pictures Shipping or freight transport possible. Dsdpfx Ajza Dv Iscpjcn Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive of the swivel nozzle Adjustable swivel angle Replaceable swivel nozzles Nozzle holder swivels and is replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for the test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Djdpfx Aozh D Rmecpecn Weight: 375 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Including metal struts to increase the floor load capacity Dcedpfxszh Htwj Acpsn Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chamber-type testing equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR This series includes automatically controlled chamber-type testing equipment of type A-TR. The internal device control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR Dcsdpfxjzh Ht Rs Acpon External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / shelf 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range for humidification S: up to 70°C Control range for test chamber K: up to 50°C Control range for test chamber S: up to 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Stock of test solution: approx. 150 liters Test solution consumption / hour: approx. 0.7 – 1.0 liters Water filling of the base pan: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, TECHNICAL DETAILS Quenching tank for stirring oil quenching - power : 0.25 [kW] Dcedpfx Acsug U Thspen - voltage : 3 x 380 [V]

Year of construction: 2025, operating hours: 20 h, condition: new, stainless steel construction for 1 Euro-Palette with a loadinghight of 1500mm max 40 crates with 400 x300 x300mm L x B x H Chamberinsidedimensions: 1300x900x1800mm (L x B xH) Dedpfx Acjclq Dqjpecn Thickness of Insulation approx. 50mm Electronic Regulation of Pasteurizationprocess: Adjustment of heatingspeed (depends also on capacity of the steamboiler) Adjustment of pasteurizationtemperature Adjustment of required holdingtime on Pasteurizationtemperature Adjustment of switch-off temperature electronic Datalogger for Pasteurizationtemperature and Chambertemperature Aircirculation by High effective Stainless Steel Airblower Steaminjection in the Airchannel for opimized steammixing pneumatically actuated Steamvalve Kondensateoutlet on the bottom of the Chamber DN 70 4 pcs. adjustable Feets Steamconsumption: approx.:. 50 kg / H at 1 bar electric power consumption: 4kW 16A / 5pol. / 400V

Year of construction: 2025, condition: new, functionality: fully functional, stainless steel construction for 2 Euro-Palettes with a loadinghight of 1500mm max 80 crates with 400 x300 x300mm L x B x H dimensions: widht: 2450mm height 2678mm lenght: 2050mm chamber dimensions widht: 2066 mm height: 1795 mm lenght: 1340 mm Thickness of Insulation 40mm Electronic Regulation of Pasteurizationprocess: Adjustment of heatingspeed (depends also on capacity of the steamboiler) Adjustment of pasteurizationtemperature Dcedpfx Acsclq Ixspjn Adjustment of required holdingtime on Pasteurizationtemperature Adjustment of switch-off temperature electronic Datalogger for Pasteurizationtemperature and Chambertemperature Aircirculation by High effective Stainless Steel Airblower Steaminjection in the Airchannel for opimized steammixing pneumatically actuated Steamvalve Kondensateoutlet on the bottom of the Chamber DN 100 4 pcs. adjustable Feets Steamconsumption: approx.:. 80 kg / H at 1 bar electric power consumption: 5,5kW weight: approx. 650 kg

Condition: used, Netsch Membrane Chamber Filter Press Dedpfx Aszvahwscpecn Format: 1200x1200 Number of plates: max. 100 Plate material: PP Filter area after expansion: 142 m2 Press volume after expansion: 1980 l Cake thickness: 30 mm Dimensions: L 11182 mm x W 2580 mm x H approx. 4100 mm Weight: 25800 kg

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Djdpfxeziywrj Acpjcn Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Here we offer you a climate chamber. Water-cooled Test chamber volume: 350 liters Internal chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature working range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate working range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% RH Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% RH over time up to 90% RH max. ±1 - 3% RH over time above 90% RH Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg Type: CS-70/350 For your safety as a buyer, please note the following information: The following steps are performed in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run which is monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) (Specifications, technical data and details may be subject to change. Errors excepted.) Dcedpfx Aceziyw Eepon For any further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Temperature Test Chamber We offer you here a CTS temperature test chamber. Water-cooled Model series: T-40/600 Including metal support bars to increase floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Dcedpfxoziyw So Acpsn Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Nominal power: approx. 5.5 kW Nominal current: approx. 8.5 A Refrigerant: R404A Weight: 550 kg Type: T-40/600 /011232 Important information for you as a buyer! The following steps are carried out on all our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refilled with legally-compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored by calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the data!) If you have any further questions, we are happy to assist you by phone.

Condition: excellent (used), Binder Model: Binder MKT 240 E3 Climate Test Chamber / Temperature Simulation Chamber –70°C to +180°C | 400V Djdpfoylxvysx Acpocn For sale is a professional environmental simulation chamber from BINDER, model MKT 240 E3. This unit is ideally suited for temperature testing in industry, research, quality assurance, as well as electronics and material testing. Features: - Temperature range approx. –70°C to +180°C - 240 L usable capacity - 400V 3-phase power supply - Power consumption: 6.5 kW - Precise microprocessor control - Low-temperature technology with R404A / R23 refrigerants - Heavy-duty industrial design - Made in Germany Technical Data: Model: MKT 240 E3 Voltage: 400 V / 50 Hz / 3~ Power: 6.5 kW Rated current: 11.3 A Max. temperature: 180°C Refrigerant: R404A / R23 Max. operating pressure: 25 bar Interior dimensions: approx. 600 x 650 x 600 mm External dimensions: approx. 925 x 1,825 x 865 mm Weight: approx. 320 kg Condition: used Scope of delivery: (see picture) (Specifications and data are subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Dcodpfx Asw Emyzscpon