Used Chamber Furnace for sale (2,644)

Condition: like new (used), functionality: fully functional, Year of construction: 2020, LC-tray degassing chamber 2. Degassing Chamber: 1. Vacuum profile; 1.1. Pressure set points freely adjustable between 1.103 and 1.10-3 mBar 1.1.1. Measurement range: 1.103 – 5.10-4 1.2. Time set points freely adjustable between 1 and 600 min per step 1.2.1. Degassing step (D) can range from minutes to days 1.3. Evacuation and ventilation rates must be controllable 1.4. The evacuation cycle (A – D) is executed automatically 1.4.1. The venting step (E) must be manually activated (operator) 1.5. Typical degassing profile An LC-tray degassing chamber is a specialized vacuum chamber designed to remove trapped air and dissolved gases from liquid materials (such as Liquid Crystals or "LC liquid") contained in a tray. This process ensures that the material is free from bubbles prior to further processing, which is critical for the quality and reliability of electronic components and displays. Core Functionality - Controlled Vacuum Environment: The system generates a vacuum, reducing the pressure above the liquid, which forces trapped gas bubbles to rise and escape. - Precision Profiles: High-end units provide freely adjustable pressure set points (e.g., between 1×10³ and 1×10⁻³ mBar) and time cycles (from minutes up to several days) to suit different material viscosities and process requirements. - Automated Cycles: Evacuation cycles are performed automatically, while venting is manually controlled to prevent liquid agitation or sudden movement. Nwedpfx Agswliryo Ioc Key Components & Features - Chamber Construction: Usually constructed from 304 stainless steel or polished aluminum to ensure high vacuum resistance, durability, and easy cleaning, thereby reducing the risk of contamination. - LC-Tray Drawer: Special drawer or adaptation system ensures easy loading and unloading. It is vital that the tray stays perfectly level (waterpas) to avoid liquid spillage. - Monitoring Window: A thick, transparent lid (often made from acrylic) or viewing panel enables operators to monitor the liquid surface and bubble behavior during the process. - Cleanliness Standards: Interior surfaces are highly polished to prevent moisture retention and ensure no contamination by chamber materials. Typical Specifications (Based on industrial models such as GMC/Masevon):

Condition: used, tank capacity: 1,800 l, GENERAL Design: rectangular Remarks: Double-chamber tank 1800 liters (1 x 1300 liters, 1 x 500 liters); each chamber has a manway, diameter approx. 415 mm; each chamber has 1 outlet (1 x internal pipe diameter approx. 35 mm, 1 x internal pipe diameter approx. 38 mm); 2 welded reinforcements made of V2A in one of the chambers (see photos) Total width: 2,080 mm Total height: 1,500 mm Total length: 1,100 mm Location: Bremen Volume: 1,800 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: Food products TANK Mounting: Feet Number of feet: 4 pieces EQUIPMENT Manway / Dome: on the tank MATERIAL CHARACTERISTICS Outer surface: marbled Feet material: stainless steel Nwedpfx Ageyck Tfo Ijc

Condition: used, tank capacity: 3,000 l, GENERAL Design: rectangular Remarks: 2-chamber tank (1 x approx. 2000 liters, 1 x approx. 1000 liters); internal height approx. 1000 mm; opening chamber 1: approx. 1,260 x 1,330 mm, opening chamber 2: approx. 1,260 x 750 mm; side walls slightly curved outwards Total width: 2,430 mm Total height: 1,650 mm Total length: 1,650 mm Top: open Location: Bremen Volume: 3,000 liters Njdoyck Ngjpfx Ag Iowc Product-contacting material: V2A 1.4301 (AISI 304) Condition: used Last application: water tank for agricultural use TANK Base: height-adjustable legs Number of legs: 4 EQUIPMENT Outlet: 50 mm MATERIAL CHARACTERISTICS Outer surface: marbled Legs material: stainless steel

Year of construction: 2025, condition: new, functionality: fully functional, Equipment: CE marking, Bogie hearth furnace / kiln / oven for heat treatments on steel (normalizing, annealing, tempering, preheating, etc.) made by Pagnotta Termomeccanica srl, Deruta, Italy Model FFEC/TT Nwodpfewd Halox Ag Ioc Maximum temperature: 800°C Usable load dimensions: 1,300 x 1,000 x 1,300 mm (H) CE certification 12-month warranty New machine, built in Italy The specifications and attached photos are purely indicative. Customized machines are available, specifically for each heat treatment process.

Condition: used, tank capacity: 44,480 l, GENERAL Equipment: Lifting lugs Design: Vertical Remarks: Double-chamber storage tank divided into two 22,240 litre tanks; total height according to drawing, cylindrical height for each 22,240 litre tank according to drawing Internal diameter: 3,200 mm Total height: 7,380 mm Max. overpressure: 1.0 bar Location: 6250 Kundl, Austria Technical documentation: Drawings, various documents Nameplate: Vacuum: 0.25 bar Volume: 44,480 litres Cylinder wall thickness: 6 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,930 mm TANK Max. permissible operating temperature: 100°C Nodjyci Unspfx Ag Iswc Ends: Dished heads Support type: Legs Number of legs: 4 pcs EQUIPMENT Manhole / Access port: in the top head (DN 600) Outlet: Flange DN100 TECHNICAL DATA / DIMENSIONS Bottom head wall thickness: 10 mm Top head wall thickness: 6 mm

Condition: good (used), Schröter maturing chamber for 160 trolleys Nedpferb A Nrox Ag Iewc

Year of construction: 1994, condition: good (used), The system consists of: - 2 pieces of hardening ovens (1 x 10 Cg = 1,000 ° C; 1 x 11Cg = 1,100 ° C) - 1 piece tempering furnace (6 Cg = 650°C) - 1 piece of salt bath - 1 piece of oil bath - 2 washing machines (one per bathroom) - 1 piece charging machine - 2 parking spaces - Fumigation boards per system - Processing plant for salt Nsdpfx Ajydlpksg Iewc - 9 preparation spaces - Base grid with cargo carrier - Capacity pto batch 165 kg - Usable dimensions = 400 x 400 x 600 (l x w x h) - Control Siemens S7

Year of construction: 2002, condition: excellent (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg Nedpfx Aoydll Sjg Ijwc - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Year of construction: 1997, condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg Nodpoydllljfx Ag Iewc - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Year of construction: 1973, condition: good (used), rust size: 700 x 650 x 1.100 mm Nsdpfxeydld Is Ag Iewc batch weight: 1.000 kg Temperature: Max. 750 °C connected load: 78 kW Equipment: Incl. Control system (should be renewed) + Charging machine others: Furnace can be moved under nitrogen

Condition: like new (used), Year of construction: 2025, Binder KBWF 720 Growth Chamber, ex-demo from 2025, like new. Temperature range: 0°C to 70°C Temperature range with lighting: 10°C to 60°C Humidity range from 10 to 80% relative humidity Adjustable lighting cassettes The KBWF series fitotron chambers utilize natural lighting to provide uniform and consistent conditions for illumination, humidity, and temperature. Nwjdpfxoyahm Rj Ag Isc These chambers are ideal for plant and other organism cultivation, as the homogeneous light distribution and humidity regulation stimulate growth, similar to the constant temperature maintained in climate chambers. Temperature can be displayed in the range of 0°C to 70°C with an accuracy of one tenth of a degree, and humidity with an accuracy of one tenth of a percent. The device is equipped with a microprocessor that effectively controls the humidification and dehumidification system. Humidity regulation is carried out using a capacitive humidity sensor and steam humidification. Advanced program controls allow for precise climate condition management, even over extended periods. Standard KBWF series chambers feature variable-position lighting cassettes, each equipped with five daylight fluorescent tubes. Special plant growth fluorescent tubes are also available, providing an ideal spectrum for photosynthesis, making these chambers suitable for simulating perfect climatic conditions in plant biotechnology, forestry, and agriculture. Climate chambers with integrated lighting and humidity control are also suitable for the pharmaceutical and chemical industries, basic quality assurance research, and materials testing. Devices are equipped with a controller featuring time-segment programming and a color LCD monitor for convenient operation. Key features: - Preheating chamber technology e™ - Adjustable fan speed - Humidity control via capacitive sensor and steam humidification - Intuitive touch-screen controller with time-segment and real-time programming - Internal data logger, measurement values in open format readable via USB - Device self-test for comprehensive status analysis - Airtight inner safety glass door - Glass corrosion prevention with special TIMELESS coating - Data display on a color LCD monitor - Stainless steel wire shelves - 30 mm access port with silicone stopper on the left side - Class 3.1 temperature sensor with visual and acoustic temperature alarm - Computer connection interface: Ethernet - Door heating

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). Nwedpsya Ev Nefx Ag Iec The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climatic Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for temperature and humidity testing of multiple test specimens simultaneously. Device Description: This climatic test cell enables you to evaluate the function or material properties of test items under the influence of temperature and humidity. Efficient air circulation with a high recirculation rate ensures optimal environmental transfer to the test samples. The air treatment section is positioned at the rear of the chamber interior. The refrigeration units are accessible in a separate frame located behind the device. The control system is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber features a self-regenerating compressed air dryer. A blower system allows the chamber to be purged with fresh air as needed. Technical Performance Data: Temperature Testing: - Temperature range: -60°C to +100°C - Temporal temperature deviation: ±0.5 to 1 K - Rate of temperature change (linear, with test item and thermal radiation, measured at supply air): - Heating: 2 K/min from -40°C to +85°C - Cooling: 2 K/min from +85°C to -40°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89°C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±1% to ±3% r.h. Technical data is based on an ambient temperature of +25°C, nominal voltage 400 V, without samples, without radiation, and without additional equipment. Nwsdsx Eabpopfx Ag Iec Dimensions: - Internal dimensions (test chamber/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm - External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Configuration: - Cooling unit: Water-cooled, low-noise, semi-hermetic, infinitely variable power regulation via electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A Notes: - Inspection by appointment possible (46325 Borken) - Shipping via freight forwarder possible – costs and arrangements upon request - Scope of delivery: (See image) (Specifications subject to change and errors excepted!) We will be happy to answer additional questions by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climate test chamber allows you to evaluate the performance or material properties of a test item under the influence of temperature and humidity. Efficient air circulation with a high recirculation rate ensures optimal temperature and humidity transfer to the test specimen. The air treatment compartment is located at the rear of the interior chamber. The system units are housed in a separate frame behind the chamber and are easily accessible. The control system is installed in a separate control cabinet, with the operator panel integrated into the cabinet door. For humidity control, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be flushed with fresh air via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point area: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3 % RH over time The technical data apply to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, radiant heat, or additional features. Dimensions: Interior (Test Chamber/Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm External dimensions: - Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) Nwjdpjx Eaxbofx Ag Ioc - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic, with stepless capacity adjustment via electronic monitoring and control system - Environmentally-friendly refrigerants: R 23 / R 404 A Notes: - Inspection available by appointment (46325 Borken) - Shipping by freight carrier possible – costs and arrangements upon request - Scope of delivery: (see picture) (Subject to technical modifications and errors in specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C Nwedpfx Agsx D Abpe Ioc - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Nwodpfjrt U Nusx Ag Isc Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 1995, condition: ready for operation (used), Two walk-in climate chambers including Wolf burner are available. Heating capacity: 105kW, heating medium: oil/gas, max. oil throughput: 14.9kg/h, air volume flow: 2.78m³/h, max. external delivery pressure: 400Pa, control: PLC. Documentation available. An on-site inspection is possible. Nodpjyit Hbsfx Ag Iewc

Condition: used, dimensions: 9.15 m x 2 m x 2.95 m Nodpfx Asyi Hynjg Iowc

Year of construction: 2010, condition: good (used), Very good solution to use one press for two different materials and You don't have any problems to sort them later. Capacity 20 m3. 5,5 kW Nodpfx Aogzulujg Ijwc 400/32 A

Condition: ready for operation (used), A long furnace Löcher with charging trolley operation is available. The furnace was part of a bending plant for the production of flange rings. Interior dimensions X/Y/Z: approx. 14000mm/500mm/1500mm, max. temperature: 1200°C, total furnace dimensions X/Y/Z: approx. 4100mm/3850mm/16000mm, control: CNC. The machine has a control defect. Documentation available. On-site inspection is possible. Nedpfxewkiipo Ag Iewc

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Nedpjvxvgrsfx Ag Ijwc

Year of construction: 2010, condition: ready for operation (used), A single-chamber glass tempering furnace (pre-stressing system) Uniglass for the toughening process of safety glass is available. Heating capacity: 690kW, motor power: 870kW, total power: 1570kW, minimum diagonal dimension: 290mm, glass thickness range: 2.85mm–15mm, max. glass dimensions X/Y: 4800mm/1500mm. The ceramic rollers are in poor condition. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Nwedpfx Agow Igvto Iec

Condition: ready for operation (used), Chamber depth: 750mm, sealing bar configuration 2x 650mm per chamber, built-in, electrical connection 3 x 400/415V 50Hz, 3 x 220V 60Hz, weight approx. 650kg (with 300m³/h vacuum pump), packaging speed approx. 2–3 cycles/minute. Length: 1600mm, width: 1055mm, height: 1045mm, weight: 650kg. An on-site inspection is possible. Nwsdpfx Asw Nq Sbsg Ijc

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Nedpfx Aew Emyzsg Ijwc

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Nwedpfstxb Avjx Ag Ijc