Used Chipper for sale (396)

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -The two-motor HOMAG profile milling units ensure corner rounding even when processing veneer -for rounding edges on the front and rear edges of the workpiece and at the bottom -each 2x corner copying units -2x engines Perske Dwsdpfxsb Uht No Ai Ejd -Power: 0.3 KW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Dimensions: 780/470/H340 mm -Weight: 52 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit allows you to pre-mill the upper and lower edge overhang -with keying: from 1 side each -1x engines Perske -Power: 1.125 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -1x engines Perske -Power: 1.5 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 500/340/H600 mm Dwedsb Uhvcepfx Ai Eed -Weight: 50 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x engines Perske -Motor type: KNS 70.12/2.01 Dwodjb Uhvvopfx Ai Eod -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1150/600/H1250 mm -Weight: 280 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Katt, milling unit with 3 milling cutters -Motor: Type N132M 12 kW / 2960 rpm Dwodpfogy Dbpjx Ai Eod -Protection class: IP 44 -Shaft: both sides Ø 40 x 235 mm -Milling width: 20/10/18 mm -Dimensions: 840/320 / H380 mm -Weight: 99 kg

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor Dwedpfofkg Hrjx Ai Eod -Power: 0.15/0.22 kW 11160/17250 rpm at 133/200 V/200/300 Hz -Shaft holder: Ø 15 x 15 mm -Dimensions: 190/70/H95 mm -Weight: 1.8 kg

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1410 rpm at 50 Hz -Shaft holder: Ø 30 mm Dwjdpfx Aiscmyg Ee Eod -Price: per piece -Number: 1x available -Dimensions: 660/280/H185 mm -Weight: 52 kg

Year of construction: 1993, condition: ready for operation (used), Various old sawmill machines are available. 1) Costa Leonard twin-shaft saw, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Esterer WD step feeder, max. log length: 6000mm. 3) Esterer HD 30 saw frame, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Zeno drum chipper, drive power: 55kW. 5) Zimac board stacking machine, working length range: 800mm-3000mm. 6) Schicks steel chimney, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Dwsdpfxsyw Sv Ej Ai Esd

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Set for micro-dovetail jointing for high-volume and mass production Features: – High-performance production line, – Heavy-duty working units, – High feed rates, – Accelerated handling movements ensure high throughput. Depending on the desired output, additional buffer conveyors can be integrated to speed up the production process. Dwodpfx Aox Idl Hei Esd TENONER FC-10KZ-6 Specifications Values Milling spindle 50 x 210 mm; 5,500 rpm Spindle motor 18.5 kW Chipper saw (special) 300/60 x 8 mm Saw motor 6 kW Working table width 600 mm Workpiece package height 30 to 150 mm PRESS FC-10PZ6 Specifications Values Board width/thickness 30-150 mm / 20-70 mm Finished board length 6,000 mm Line capacity up to 15,000 linear meters/shift The following modifications and upgrades have been made to the machine: - New electrical installation - Machine controller replaced with SIEMENS SIMATIC S7 and SIEMENS SIMATIC HMI panel - New infeed table before the tenoners with buffering system - New board turning mechanism – side feeder after tenoners (chain-driven turning mechanism controlled by frequency inverter) - New chain feeder before the press (length 4,500 mm) - Additional pre-scoring aggregates for finger-joint gluing – furniture board installed at the tenoners Machine dimensions: 16.5 m x 5 m

Condition: repair required (used), Year of construction: 2002, Hacker chipper requiring overhaul with a 1300 mm rotor width 45 kW motor approximately 50 knives, 40 x 40 mm, on the rotor Dwsdj Ah T R Tjpfx Ai Ejd The chipper runs, but the gearbox wobbles on the rotor stub It is still possible to chip material, but it will need to be repaired at some point Large hopper on top, approximately 2.4 x 2.4 m

Year of construction: 1994, operating hours: 3,689 h, condition: used, Schliesing MX 660 Wood chipper on a two-axle chassis > Hatz 4L40C diesel engine > Braked two-axle chassis > 2 infeed rollers > Only 3,689 operating hours > Year of manufacture: 1994 Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will gladly assist you. Further information can be found on our website. Errors and prior sale excepted! Road approval = Further information = Year of manufacture: 1994 Djdjz Hidyspfx Ai Eowd Operating hours: 3,689 Please contact Tobias Ebert for further information.

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Dedpoqmi Irjfx Ai Eewd Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: new, Year of construction: 2021, protection type (IP code): IP54, type of cooling: air, Specification: Cross feeding chain conveyor; Inclined separator, reversible; Longitudinal chain conveyor, reversible incl; Itsbkuow Uqqnor Ivfjn Cleaning roller conveyor; Flat belt conveyor with metal-free zone, reversible; Metal detector; Dedpfx Aie Afxc Aj Ejwd Crane for contaminated material; Vibratory feeding table; Drum chipper „ORIGINAL PALLMANN“, type PHT 850 x 1250 with mechanical clamping system (3 knives-rotor); Auxiliary exhaust system; Trough belt conveyor for bark; Scraper conveyor; Double screw conveyor; Trough chain conveyor, type Z-1600/2; Electric design & automation.

Condition: excellent (used), Year of construction: 2014, operating hours: 8,884 h, functionality: fully functional, mileage: 68,462 km, power: 397.17 kW (540.00 HP), first registration: 03/2014, overall weight: 32,000 kg, fuel type: diesel, color: green, axle configuration: 8x4, fuel: diesel, brakes: retarder, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, fog lights, trailer coupling, truck registration, Very well-maintained, fully functional wood chipper. Dwodpfsz E S Swex Ai Eed Man TGS 35.540 8x4 with Adblue, Chippo 5010 dT, rotating model. 4272 rotor operating hours.

Condition: used, Year of construction: 1973, operating hours: 3 h, functionality: fully functional, machine/vehicle number: GM900, total length: 17,100 mm, total height: 4,340 mm, total width: 3,363 mm, overall weight: 7,000 kg, frame height: 4,340 mm, frame width: 2,780 mm, For sale is a cross-flow shredder mounted on a VOEST GM900 frame. The cross-flow shredder can be operated with two or three chains. The shredding chamber is open and can be equipped with different grating grids. After shredding, a permanent overband magnet is installed. The system control was newly purchased and installed. The system can be disassembled for transport. Dwodoz Sp Ecspfx Ai Esd

Condition: repair required (used), Disc chipper Bruks IDC000127 Dsdpfx Aovzw Tfei Eewd - infeed 220 X 280 mm - without electric motor

Condition: good (used), functionality: fully functional, Wood chipper for logs and branches Drive via PTO shaft Max. infeed size: 35 x 35 cm 4 blades 2 screens with 20 mm and 30 mm mesh Only 1600 operating hours Dodpfj Agyppsx Ai Eswd

Condition: used, Year of construction: 2019, functionality: fully functional, color: other, Wood shredder in good condition. Immediately ready for use. Dedpoz R I S Hsfx Ai Eswd The shredder was purchased from a bankruptcy estate and is now available for resale. Approximate dimensions: 110/240/285 cm, year of manufacture 2019.

Condition: used, axle configuration: 2 axles, Schliesing MX 660 Wood chipper on a tandem-axle chassis > Hatz 4L40C diesel engine > Braked tandem-axle chassis > 2 infeed rollers > Only 3,689 operating hours > Year of manufacture: 1994 Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. You can find more information on our website. Errors and prior sale excepted! Dedpfxe Aftn Ho Ai Eewd = Further information = Year of manufacture: 1994 Payload: 2,900 kg Gross vehicle weight: 2,900 kg Please contact Tobias Ebert for further information.

Condition: reconditioned (used), Year of construction: 1985, Hacker, factory-refurbished in 2023 for €7,500. Motor: 22 kW Equipped with 49 impact blades Throughput: 300 - 1500 kg/hour Dwjdps Agw U Njfx Ai Eod Screen hole size: 25 mm Operating hours: 7738 Infeed hopper: 90 x 90 cm With an additional hopper on top, measuring 1 x 1 m, total height: 265 cm.

Condition: excellent (used), CATALOGUE NUMBER 7176 TECHNICAL SPECIFICATIONS - Hopper inlet 1050x600mm - Outlet for shredded wood, diameter 160mm - Rotor working width 590mm - Main motor 18.5kW - Pump motor 0.75kW - Number of knives: 14 pcs - Knife dimensions: 30x30mm - Screen: 10x12mm - Clamping drawer - Electric auto-reverse - Dimensions (L/W/H): 1900x1200x1530mm - Weight: 990kg ADVANTAGES - Auto-reverse - German-made - Unpainted - Similar to WEIMA WL4 - Clamping drawer - Very good condition - Used wood chipper Dwjdpfxjzxg Sno Ai Eod Net price: 48900 PLN Net price: 11372 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Year of construction: 2008, operating hours: 133 h, condition: used, JBM Wood Chipper, Model 630 MDX, mounted on a single-axle chassis / car trailer > Kubota diesel engine, 44 kW (60 hp) > Spring-suspended, braked single-axle chassis > Wide feed opening: 310 x 220 mm > Log diameter up to 220 mm > Adjustable wood chip length: 0 – 25 mm > Weight: approx. 1,690 kg > Only 133 operating hours! > Year of manufacture: 2008 Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will gladly assist you. Further information can be found on our website. Errors and prior sale excepted! Dwodpfxezyf Htj Ai Esd = Further information = Year of manufacture: 2008 Operating hours: 133 Please contact Tobias Ebert for further information.

Condition: ready for operation (used), functionality: fully functional, For sale is a wood chipping line (chipper canter line) with the following components: - Log infeed - Step conveyor for logs, manufacturer Saenger + Massierer Dwsdpfx Aijzrfkvo Ejd - Singulator - Log conveyor - Centering infeed with log turner, manufacturer Kockums, type 447-6 C, serial number 70984 - Chipper centering device, manufacturer Kockums, type 240-12 D - Outfeed conveyor with lateral discharge option - Control cabinet and control system (Siemens Simatic Panel) for the entire line - Max. log diameter: 50 cm The line is sold excluding any warranty and liability for defects.

Condition: used, Technical specifications: Dodpfx Aj Agwlcoi Ejwd For shredding wooden waste. Shaft width: 500 mm Shaft diameter: 250 mm Screen diameter: 15 mm Safety switch Power supply: 400 V Motor power: 7.5 + 1.5 kW Overall dimensions: Length: 1600 mm Width: 1200 mm Height: 1550 mm

Condition: excellent (used), Year of construction: 1974, Catalog number: 7685 Dodpe Aggbqefx Ai Eswd TECHNICAL DATA - inlet width: 440mm - inlet height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen dimensions: 50x50mm - toothed drive shaft, top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (with adjustable speed) - with conveyor belt - length of feed belt: 4006mm - width of feed belt: 380mm - belt feed direction: forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight: approximately 2000kg ADVANTAGES - German-made - with conveyor belt - auto-reverse - used shredder, very good condition Net price: 76,900 PLN Net price: 17,880 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 3,500 kg, fuel type: electric, – Year of manufacture: 2015 – DTR, CE – Capacity up to 20 m³/h TECHNICAL PARAMETERS: – Width of feeder inlet: 500 mm – Height of feeder inlet: 180 mm – Diameter of knife shaft: 450 mm – Width of shaft: 515 mm – Two knives – Knife length: 515 mm – Toothed draw roller at the bottom – Power of motor for the bottom toothed draw roller: 2.2 kW – Toothed draw roller at the top – Power of motor for the top draw roller: 2.2 kW – (Length / width) of the feeding conveyor belt: 5000 x 520 mm – (Length / width) of the discharge conveyor belt: 10500 x 220 mm – Power of motor for the discharge conveyor belt: 3 kW – Belt feed forward / backward Transverse chain feeder / buffer for the shredder: – Overall length: 10600 mm – Width of feeder: 1750 mm – Distance between outermost chains: 1650 mm – Distance between chains: 550 mm Dwjdpj Ah Eanefx Ai Ejd – Height of feeder from base: 1500 mm – Motor power: 4 kW – 4 chains Transport dimensions: – Length: ~1300 cm – Width: 240 cm – Height: 225 cm – Weight: ~3500 kg