Used Chuck Flange for sale (4,956)

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz Ijdpjib D H Refx Agzeik - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Condition: new, Year of construction: 2026, MBM series machine • easy start-up in the engine efficiency class • designed for smooth and efficient one-person operation • produce complete profiles in one operation and repeat them exactly at any time • Wear-free and maintenance-free direct eccentric drive Standard equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the pressure beam • 1 insert rail 68/10 mm and 68/24 mm for the bending beam Iodpewf Hghjfx Agzjik • Motorised rear stop 6-750 mm • foot switch • 16 A connection plug with 5 m cable (within the EU) • connection voltage: 3 x 400 Volt, 50 Hz (within the EU)

Condition: used, A total of 3 sets of soft, pre-turned top jaws are being offered. The price listed above applies to one set of chuck jaws. ----- Jaw interface: Serration 1.5 x 60° Chuck types: Kitagawa; Howa; B210; BB210; other Asian manufacturers Chuck size: 10" approx. ø 250 mm For example: HOWA 10", Auto Strong 10" Slot N = 16 mm Width B = 40 mm ----- Picture no. = Item no. Pos.1) 8035_10_09 → €25.00 per set Pos.2) 8035_10_10 → €25.00 per set Pos.3) 8035_10_11 → €25.00 per set ----- # Order - Shipping costs / per set €9.00 ----- Jaw dimensions: Width: 40 mm Height: 40 mm Length: 110 mm Hole spacing: La = 17+22 mm For fastening screws DIN 912 = M12 T-slot => N = 16 mm ----- T-nuts or other types of chuck jaws available on request. Iiedjk Un Siepfx Agzjk

Condition: like new (used), functionality: fully functional, total height: 125 mm, outer diameter: 610 mm, hole spacing: 180 mm, Samchully 3-Jaw Chuck / HC-24 1x Standard Flange 3 x Soft Jaws Iodpsxzcq Eefx Agzsik 3 x Hard Jaws 1 x Wrench 1 x Grease Gun Specifications: Jaw Stroke Diameter: 16 Piston Stroke: 35 Max. Clamping Diameter: 610 Min. Clamping Diameter: 152 Permissible Maximum Input Force: 82 (8362) Maximum Static Clamping Force: 273 (27838) Max. Speed (rpm): 1760 Weight: 223 Moment of Inertia: 12.2 Max. Hydraulic Pressure: 3.2 (32.6) Hydraulic Cylinder (operation): Y-2035R(RE) Working Hard Jaw: HB18B2 KITAGAWA model: N-24

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment Iisdpfxexrmp Te Agzek -Tapping chuck: MK2 mount -Cutting performance: -Bore: Ø 10 mm -Dimensions: Ø 55 x 200 mm -Weight: 1.4 kg

Condition: good (used), ASSORTMENT / Soft - Hard Jaws for Three-Jaw Chuck / Base holder-tool holder / Sleeves / T-nuts -21x Set Soft Jaws (Special Jaws) Hard Jaws for Three-Jaw Chuck -Jaw dimensions LxW 120x60mm 60 degree - pointed toothing - 3mm tip distance -4x Base holders (CNC lathe) for holding boring bars and internal turning tools Iijdjwtbqdspfx Agzek -20x Reducing sleeves (various internal diameters) for internal turning tools -Various T-nuts and screws -Remainder see pictures Errors / input mistakes excepted

Condition: used, Radial Fan REITZ Type: MAE Serial No.: 601475 Year of manufacture: 2017 Airflow: 4,260 m³/h = 71 m³/min. Pressure p: 1.2 kg/m³ Air inlet: Ø 250 mm (connection diameter in the base plate) Air outlet: 245 x 195 mm Iijdpfx Agjr H Sqyjzek Motor speed: 2,915 rpm Motor power: 7.5 kW Power supply: 400 Volt, 50 Hz - Impeller with 9 blades - Directly flange-mounted drive motor - Flange dimensions for air outlet: 310 x 260 mm - Robust metal housing made of 5 and 6 mm steel Space requirement (L x W x H): 1,390 x 1,030 x 600 mm Radial fan weight: 200 kg In excellent condition, only test run.

Condition: good (used), Year of construction: 2006, functionality: fully functional, overall weight: 70 kg, chuck outer diameter: 315 mm, three-jaw chuck diameter: 315 mm, total height: 245 mm, short taper mount: 8 mm, outer diameter: 315 mm, cone diameter: 140 mm, through hole: 104 mm, jaw width: 26 mm, construction height: 152 mm, rotational speed (max.): 4,200 rpm, bar passage: 104 mm, Well-maintained Schunk 3-jaw power chuck ROTA THW plus 315-104 with quick-change jaws, KK8 chuck flange, and connection for hydraulically actuated standard stroke cylinder for sale. Suitable for machine spindle DIN 55026-AB and compatible with Schunk jaws GBK 250 and UVB 250. Additional technical information is available in the attached PDF. Since we can no longer use this chuck on our new turning-milling machine, it is being sold. The new price of the chuck is over 12,000 euros. Iiodpfjxycx Hsx Agzjk

Condition: new, functionality: fully functional, overall weight: 8 kg, chuck outer diameter: 500 mm, three-jaw chuck diameter: 400 mm, jaw width: 45 mm, construction height: 57 mm, SFG, 400 as-new base jaws "helical geared" for SCHUNK, FORKARDT three-jaw chucks, approx. 500 mm size. Other base or clamping jaws available on request. Photo No.: 404-400. Supplied with M16 x 1.5 mm screws. Manufacturer: SCHUNK. Condition: NEW. The listed price is net. Gross price: €416.50 plus shipping. Iodpfoxx U Nhex Agzoik Weight approx. 7.5 kg/set. Additional jaws available on request. Shipping within Germany at buyer's expense. For international shipping, please enquire. ---- Technical Data: Width B: 45 mm Length L: 160 mm Height H: 57 mm Cross groove N: 30 mm Bar S: 18 mm Hole spacing: L: 60 mm With/without screws: M16 x 1.5 Original price: over €550.00

Condition: used, tank capacity: 1,813 l, GENERAL Design: upright Internal diameter: 1,195 mm Total height: 2,600 mm Max. overpressure: 1.0 bar Agitator: agitator flange Type of support: feet Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 1,813 liters Wall thickness, cylinder: 4.2 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,260 mm Previous application: chemical industry Iedoxqdrvjpfx Agzjik TANK Max. operating temperature / °C: 100 °C Number of feet: 4 pcs EQUIPMENT Manhole / dome: in the top head Outlet: available Remark: minor adhesions MATERIAL SPECIFICATION Feet material: steel AGITATOR Baffle: Agitator positioning: eccentric in the top head TECHNICAL DATA / DIMENSIONS Wall thickness, heads: 4.7 mm

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck, live centering chuck -Manufacturer: Kondamat, centering chuck pipe centering chuck Iedpfxoxrlvls Agzeik -Recording: MK4 -Dimensions: see photos -Dimensions: Ø 78 x 230 mm -Weight: 2.7 kg

Condition: excellent (used), functionality: fully functional, We are offering a used EROWA UPC chuck here. ER-016841. The UPS chuck is in very good condition and fully functional. Viewing possible by appointment Shipping and viewing possible! Iedpfx Agexqnqvezsik

Condition: used, Centrifugal fan REITZ type MAE Serial no. 601438 Year of construction 2017 Volume flow 10200 m³/h = 170 m³/min. Pressure p 1.2 kg/m³ Air inlet Ø 300 mm (nozzle diameter in the base plate) Air outlet 345 x 345 mm Motor speed 2940 rpm Motor power 18.5 kW Mains connection 400 Volt 50 Hz Iiedpfx Agjr H Sqvozek - Fan wheel with 8 fan blades - Directly flanged drive motor - Flange dimensions for air outlet 450 x 450 mm - Sturdy metal housing made of 8 mm steel Space requirement L x W x H 1930 x 1240 x 950 mm Weight centrifugal fan 500 kg very good condition, only test run completed

Condition: used, diameter 200 mm height 150 mm hollow 55 mm weight of the machine ca. 30 Kg dimensions 0,2 x 0,2 x 0,2 m 3-jaw chuck with 1 sets of drill jaws Short taper mount size 6 (131,4mm bolt circle) Iijdpfx Agexwzd Aozjk Bayonet lock Chuck wrench

Condition: new, Year of construction: 2017, Kitakawa orginal 5 inch 3 jaw Large hole power chuck A2-8 direct spindle connection condition new, never use. in stock include 3 soft jaws for spindle A2-8 Isdpfsm E Imzsx Agzsik new price 11.000

Condition: used, GENERAL Iijdoxqbznopfx Agzek Miscellaneous: - Agitator flange DN 150 / 168.3 DIN 2633 PN 16 - Mounting flange DN 250 Location: Bremen Product-contact material: V4A 1.4571 (AISI316) Condition: used

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck, live centering chuck -Manufacturer: Kondamat, centering chuck pipe centering chuck -Recording: MK4 -Dimensions: see photos Iijdpfjxrlt Rox Agzek -Dimensions: 200/200/H285 mm -Weight: 10.1 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: 115090324, KITAGAWA POWER CHUCK e.g. OKUMA, MAZAK, MORI Three-jaw chuck with serration. cylindrical holder for spindle flange Spindle mounting flange in scope of delivery KK6 Drawtube connection thread M60x2,0mm currently under investigation Jaw interface: 1.5 x 60 ° Weight without clamping jaws approx. 30 kg Iisdpsi Hqhqjfx Agzek For further inquiries, we are at your disposal. Shipping costs on request

Condition: used, 1 set of soft top jaws, chuck jaws RÖHM Type: Duro 160/3 Suitable for 3-jaw wedge bar chucks Chuck diameter: 160 / 180 mm Jaw length: 84 mm Jaw width: 39 mm Height without step: 95 mm Height with step: 99 mm Slot width: 8 mm Step width: 18 mm Hole spacing: 32 mm Holes: Ø 9 mm (for M8 bolts) Iiodpfx Asxpqz Ujgzek - 1 set of steel top jaws - used, machined jaw set Base jaw dimensions L x W x H: approx. 84 x 39 x 99 mm Weight: approx. kg Multiple sets of top jaws available under stock number 62056 Top jaws compatible with RÖHM, FORKARDT, SCHUNK, or SMW

Condition: used, diameter 500 mm height 250 mm Isdjxwzcrjpfx Agzsik hollow 150 mm weight of the machine ca. 0,2 t dimensions 0,5 x 0,5 x 0,3 m 3-jaw chuck with 2 sets of drill jaws Short taper mount size 11 (235mm bolt circle) Bayonet lock Chuck wrench

Condition: excellent (used), functionality: fully functional, We are offering a used EROWA UPC chuck here. ER-016841. Iodjvmgdkopfx Agzeik The UPS chuck is in very good condition and fully functional. Viewing possible by appointment Shipping and viewing possible!

Condition: used, Technical details: diameter: 200 mm Torque: 2200 U/min Iodsu Nk E Ijpfx Agzoik weight of the machine approx.: ca.17 kg 3 jaws lathe chuck according Norm TGL 30-2332 *

Condition: used, Technical details: diameter: 250 mm passage: Ø 80 mm width: 106 ohne Flansch mm weight of the machine approx.: auf Anfrage kg dimensions: Ø 250 x B: 140 mm Iodpfx Aeu Nlatogzjik three jaw chuck made of steel incl. chuck key inkl. 2x 3-Backen flange size : Ø 250 x 26mm, fastening with 4 pieces clamping bolts inside divided circle Ø 170mm on Sale with or without flange! i.D. *

Condition: used, Year of construction: 2006, Technical details: Iedpfx Agsu Nlhwozoik diameter: 430 mm passage: 197 mm width: 240 mm revolution per minute: 1500 U/min weight of the machine approx.: 237 kg Power chuck for EMAG No. 5875620 features: automatic clamping Flanged bore inside Ø 186mm through hole Ø 197 x 64mm 3x clamping bolt M20x250mm Fmax: 5000 daN 2Set of forming jaws *

Condition: used, Technical details: diameter: 250 mm width: 80 mm revolution per minute: 1800 U/min weight of the machine approx.: 17 kg dimensions: Ø 250 x B: 110 mm Flange mount on base body = Ø 210 x 6 mm, pitch circle Ø 228 mm with 3x M12 holes Iijdpfx Agsvgbhqszsk incl. 3 soft jaws mounted as outer jaws, max. clamping range outside: Ø 60 - 188 mm and max. inside: Ø 17 - 192 mm Equipment: with chuck key *