Used Circuit Board for sale (6,166)

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 250 mm, overall weight: 650 kg, pass-through width: 250 mm, The Ceetec A250 is a medium-sized unit from the series of coating machines and is therefore ideally suited for use in industrial and production facilities, such as paint shops, joineries, sawmills or building supply stores offering facade boards, decking, soffits, structural timber, etc. The device is most commonly used in manual mode, which means that the workpieces are loaded and unloaded by hand. Wooden components are conveyed horizontally through the machine by an automatic feed system. The Ceetec A250 ensures high-quality finishing thanks to its eight rotating brushes, each of which can be individually adjusted. Excess paint recirculates in a closed-loop system through a filter and back into the tank. The closed-loop circuit ensures optimal paint usage. The unit is supplied complete with brushes and a bag filter, making it ready for operation after connecting to a power source. The Ceetec A250 is a standard model, which means it is typically in stock and can usually be delivered at short notice. Brush coaters of the A-series are easy to keep clean. Consumable parts that naturally wear out are stocked in our warehouses, ensuring availability and fast delivery times. Thanks to the modular design of the machines, the operator can handle the replacement of most parts independently. The machine can be additionally equipped with a variety of brushes, bag filters with different mesh sizes, roller tables, and paint trolleys, among others. For processing raw wood, it is recommended to install a cleaning unit to remove dust and shavings before the machine. The device is intended for use with water-based products. ADVANTAGES OF CEETEC A250: Independent adjustment of brush heads Iedpfxjxhc Tmo Ac Eetk Application system using low-pressure nozzles and distributing brushes on all four sides of the workpiece Closed-circuit operation enabling recovery and reuse of excess preservatives Adjustable feed speed Can be equipped with a unit for handling short elements (from 800mm) Option to fit a 2m roller table at the machine infeed and outfeed Basic working parameters: Speed: from 18 m/min to 42 m/min Workpiece dimensions: Max. H: 250 mm x W: 250 mm. L: Min. 2000 mm. (other sizes available!) Power supply: 3 x 380 V + PE IP. Class 54 Machine dimensions: 2450 mm x 1200 mm x 2000 mm (height) Net weight: approx. 600 kg

Condition: excellent (used), functionality: fully functional, overall weight: 3,200 kg, type of input current: three-phase, total width: 2,200 mm, total length: 6,000 mm, total height: 1,600 mm, input voltage: 400 V, input current: 32 A, AUTOMATED DIGITAL CORRUGATED PRESS - PKG1300 The device is technically functional, used only for testing. Konica Minolta PKG-1300 industrial digital printer for corrugated and folding carton applications. Designed for short-run production, customized packaging, prototypes and on-demand box printing. Equipped with automatic feeding and stacking system, Ergosoft RIP, and water-based pigment ink technology. The Konica Minolta PKG-1300 is ideal for producing: -folding cartons, -corrugated boxes, -promotional packaging, -short-run branded packaging, -sample and prototype packaging, -custom packaging for e-commerce and retail markets. It is a suitable solution for: -short-run packaging production -print-on-demand box printing -customized packaging -sample and prototype jobs -promotional and seasonal packaging Printer specifications Resolution: High resolution: 1,200 x 1,200 dpi/Low resolution: 600 x 1,200 dpi or 300 x 1,200 dpi Print Speed: High resolution: 9 m/min./Low resolution: 18 m/min. or 27 m/min. Ink: Pigment ink, 5 liter tanks Power Consumption: Printer: 8,000 W, Web Cleaner: 5,500 W/Single Power Plug for complete system: 400 V AC, 50 Hz, 3-phase, 32 A Weight: 1,200Kg Feeder specifications Media: Cardboard plates from 1mm to 50mm thick Max. Feed size: 1,300 mm wide x 1,600 mm long Min. Feed size: 300 mm wide x 400 mm long Feed speed: Up to 27 m/min. Max. Feed pile: 400 mm Power Consumption: Feeder: 3,500 W/ Circuit protection RCCB 4P, 40 A, 300 mA, C, 10 kA (must be provided by the customer) Iodpfx Asyx E Dxec Ejtk Weight 1,100 kg Stacker specifications Media Cardboard plates from 1 mm to 50 mm thick Max. Board size: 1,300 mm wide x 1,600 mm long Stacking speed: Up to 27 m/min. Max. Staking pile: 700 mm Power Consumption: Stacker: 3,500 W/ Circuit protection: RCCB 4P, 40 A, 300 mA, C, 10 kA (must be provided by the customer) Compressed air: 6 bar, 50 l/min., 8 mm outside diameter Weight: 900 kg Software Internet connection: 24/7 requirement Platform: PC/Windows-based Controller: Ergosoft RIP Interface: PC-based Operating environment Operation: 20°C – 30°C Humidity: 50 % – 70 % RH (non-condensing) Shipped on original pallets. Assistance with transport arrangements is available. Price is negotiable.

Year of construction: 2006, condition: good (used), functionality: fully functional, Machine width: approx. 1.90 m with track/transport path approx. 1.25 m without track/transport path Machine depth: approx. 1.35 m incl. main switch approx. 1.20 m without main switch Machine height: approx. 2.00 m with superstructures/signal light approx. 1.50 m without superstructures Note: The dimensions are measured manually and may differ from official manufacturer specifications. 2. Work area / component placement area Work area in the component placement area: Itodpfx Acozl R R Ie Esk approx. 600 × 600 mm Note: This is the measured mechanical area in the machine room or in the component placement area. The maximum processable printed circuit board size may differ from this and must be confirmed separately via machine data and software settings.

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: D0A361109, conveyor belt width: 635 mm, warranty duration: 6 months, total width: 2,210 mm, total length: 1,175 mm, total height: 1,380 mm, year of last overhaul: 2026, power: 1.5 kW (2.04 HP), overall weight: 350 kg, Rondo SKO 611 Combination Dough Sheeter as a stainless steel model with computer control – the professional dough sheeter for your bakery. The Rondo SKO 611 is a professional dough sheeter made of stainless steel, combining highest precision and ease of operation. Thanks to modern computer control, programs can be saved and recalled – ideal for croissants, puff pastry, pizza or bread dough. As a reliable bakery machine, it impresses with hygiene, comfort, durability and maximum efficiency in the bakery. Isdpfx Ajk E I Tmsc Eetk Used machine – professionally refurbished Stainless steel model 6 months warranty* Features: + Mobile combination dough sheeter + With computer control & LCD/LED display + Suitable for all types of dough for sheeting and laminating + With automatic flour dispenser + With new felt and linen belts as well as new scrapers + All relevant parts have been re-felted + With drag net & ribbed mat for shaping dough pieces / rolls / breads + With long-rolling station at the bottom for all doughs for long rolling *excluding control / circuit board / display Technical data: Year of manufacture: 2010 Serial number: D0A361109 Belt width: 635 mm Roller width: 670 mm Roller gap: 0.3 to 45 mm Dimensions: Working position 2210 x 1175 x 1380 mm (W x D x H) Rest position 1600 x 1130 x 1700 mm (W x D x H) Connection values: 400 V - 50 Hz - 1.5 kW Fuse: 16A-CEE plug For an additional charge, the machine can be dismantled by bak-tec and reassembled on site for installation in the bakery.

Condition: ready for operation (used), Foresite C3 / C.I. Critical Cleanliness Control Tester Analytics Technology Year of manufacture: 2011 Ijdpfsxhcklsx Ac Eetk The C3 is unique among electronics cleanliness quality testers. It remains the only tester on the market that indicates whether a specific, critical area of a PCBA (Printed Circuit Board Assembly) is clean. Simply select the components and/or circuit areas most sensitive and vulnerable to contamination and/or reliability issues, and test a small area (0.1 in²). The C3 quickly provides feedback as to whether potentially detrimental residues, often caused by manufacturing processes, are present. Once the critical areas to be tested have been identified, the operator simply inserts a new disposable test cell into the vapor head and manually positions the head via the articulated arm over the test area. The weight of the arm and vapor head seals the test cell on the test surface. The operator then starts the automated testing sequence. Within 7-10 minutes, the operator knows whether the tested product area meets cleanliness standards. The C3 can be used directly in the production area. At the end of the test, the cell can be easily removed using the cell ejector on the head. The test sample in the cell, efficiently extracted from the small test area using steam, can undergo further analysis to identify specific contaminants and their concentrations. The entire test is simple and straightforward for the operator, with results not dependent on operator skill. The use of Pro-Site single-use test cells and extraction solution prevents cross-contamination of samples. You are welcome to arrange an inspection. We can also organize cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be provided, provided a valid VAT ID number is available. Subject to prior sale. Visit our shop and take a look at our other offerings as well. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Technical data deviations and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,550 h, laser power: 500 W, table length: 3,048 mm, table width: 1,524 mm, travel distance X-axis: 1,524 mm, travel distance Z-axis: 3,048 mm, overall weight: 2,495 kg, total width: 2,083 mm, total height: 1,346 mm, product length (max.): 3,988 mm, table load: 1,000 kg, number of axes: 3, CO₂ laser cutting machine manufactured in 2022. This KERN KER60120-KT500 OPF features a working area of 1524 × 3048 mm and a maximum workpiece height of 50 mm. It includes a powerful 500 W CO₂ laser and offers various work tables for different materials. If you are looking to get high-quality cutting capabilities, consider the KERN KER60120-KT500 OPF machine we have for sale. Contact us for further details regarding this machine. Machine – JustLaser 15.30L-C500-MC • Machine Type: CO₂ Laser Cutting and Engraving System • Configuration: Open Flatbed Gantry Laser System • Maximum Workpiece Height: 50 mm • Maximum Engraving Speed: 3.8 m/s • Maximum Engraving Speed (Metal Cutting Option): 3.2 m/s • Maximum Engraving Speed (Z12 Option): 1.5 m/s • Maximum Cutting Speed: 0.5 m/s • Motors: Brushless DC Servo Motors • Encoder System: Incremental Measurement System • Optics: Air-purged telescope, lenses and mirrors • Standard Lens: 2.5" • Optional Lens: 5.0" • Software: KCAM Laser Software • Interface: G-Code, HPGL, AD-Logic System Itjdpozbub Dofx Ac Esk • Control Board: KLCM Controlboard • Operator Controls: Key Switch, Emergency Stop, Mouse, Keyboard, Monitor and PC Included • Electrical Supply: 3 × 400 V (3L + N + PE), 50/60 Hz • Table Exhaust Requirement: 3000 m³/h • Axis Exhaust Requirement: 1500 m³/h • Maximum Air Pressure: 10 bar • Maximum Inlet Pressure: 12 bar • Maximum Air Flow: 240 l/min • Connection Size: 6 mm • Noise Level: 55 dB • Certification: CE • Operating Temperature: +15 °C to +25 °C • Humidity: 40–70 % Non-Condensing • Environment: Dust-Free • Active Laser Protection Shield • Pressure Sensors • Light Curtain • Interlock Safety System • Metal Cutting Option Included • Capacitive Height Follower • Metal Cutting Table • Copper Nozzle • 2.5" Lens Set • k-vision Print & Cut Camera System • JustAIR High Performance Turbines (2 × 1500 m³/h) Laser Source – Kern Laser Systems • Model: KER50120-4K500 OPP • Laser Type: Sealed-off CO₂ Laser • Laser Power: 500 W (0.5 kW) • Laser Wavelength: 10.6 µm • Supply Voltage: 380–415 VAC • Phase: 3 Phase (4 Wire + Ground) • Frequency: 50/60 Hz • Maximum Fuse Size: 40 A • Full Load Current: 32.3 A • Disconnect Rating: 40 A • Short Circuit Current Rating: 5000 A • Interrupt Capacity: 35000 A • Largest Amp Load: 16 A • Laser Class: Class 4 • Country of Manufacture: USA Chiller – SMC HRS090-AF-40 • Cooling Type: Water Cooling • Cooling Capacity: 5 kW • Refrigerant: R410A • Refrigerant Charge: 1.5 kg • Weight: 136 kg • Power Supply: 3~ 380–415 V, 50/60 Hz

Condition: good (used), Year of construction: 2019, operating hours: 5,350 h, Technical Data – Kamag Wiesel WBH Euro 4 Vehicle • Manufacturer: Kamag • Model: Wiesel WBH 25E40 • Type: Hooklift truck • Emission standard: Euro 4 Weights • Permissible total weight: 36,000 kg • Max. payload: 17,000 kg • Unladen weight (standard): 19,000 kg Engine • Manufacturer: Mercedes-Benz • Type: OM 934 • Power: 170 kW (231 hp) • Displacement: 5.1 l • Max. torque: 900 Nm Transmission • Allison automatic transmission Axles / Tires • 4x2 • Front axle: Single tires • Rear axle: Dual tires • Tires: 295/60 R22.5 Braking System • Disc brakes, front • Drum brakes, rear • Two-circuit compressed air brake system Isdpfxoztq Ato Ac Estk • ABS Performance • Maximum speed: 40 km/h • Climbing ability (laden): 13 % Dimensions • Overall length: 8,960 mm • Overall width: 2,315 mm • Overall height: 2,480 mm • Wheelbase: 4,800 mm • Ground clearance, front: 180 mm • Ground clearance, rear: 2,000 mm Lifting System • Lifting height, unladen: 950–1,600 mm • Lifting height, laden: 180–480 mm • Lifting capacity: 17,000 kg Steering • Hydraulic front axle steering • Turning circle (inside): 4,600 mm • Turning circle (outside): 10,500 mm Hydraulics / Electrics • Hydraulic oil tank: 530 l • On-board voltage: 24 V • Starter batteries: 2 × 12 V / 180 Ah Equipment (extract) • Cab with heating and air conditioning • Air-suspended driver's seat • LED work lights • Rotating beacon • Radio with CD and Bluetooth • Electric mirrors • Rear view camera • ABS • Hydraulic container mount • Telescopic LED marker lights • Rear trailer coupling Optical condition is age-related 4 tires at the wear limit, rear view camera defective Approximate Current operating hour counter: 5350h Current mileage: 23955km No guarantee that this corresponds to the current condition

Condition: used, power: 141 kW (191.71 HP), Year of construction: 2020, operating hours: 2,745 h, Equipment: ABS, air conditioning, all wheel drive, front linkage, * General Data * Model: JCB FastTrac 4190 * Year of Manufacture: 2020 * Vehicle Type: Compact Tractor/Carrier Vehicle (FastTrac Series) * Application: Construction, Agriculture, Off-Road Operations, Material Transport * Dimensions and Weight * Wheelbase: approx. 2981 mm * Overall Length: approx. 5270 mm * Width: approx. X mm (with/without attachments) * Attachment/Stability Features: Integrated profile/side guidance, optional ballast weight * Operating Weight (unladen/approved): approx. 12990 kg * Engine and Performance Data * 60 km/h approval * Engine Version: Diesel engine (Common-Rail/Turbocharger depending on equipment) * Displacement: approx. 6596 cm³ * Power: approx. 141kW * Fuel System: Turbocharger, exhaust aftertreatment (e.g. DPF depending on model) * Cooling: water-cooled engine, oil cooler * Drive and Chassis * Drive: All-wheel drive (4x4) or all-wheel drive/rear-wheel drive, optional automatic brake control * Transmission: hydrostatic or synchronized manual transmission (depending on version) * Oscillating Axle/Steering: Steering angle for tight spaces * Ground Clearance: approx. 300 mm * Payload/Lifting Forces: Lifting capacity according to model designation * Hydraulics and Accessories * Hydraulic Pressure: approx. 180 bar * Hydraulic Flow: Main circuit/secondary circuit depending on version * Pressure and Flow Control: Proportional control, joystick operation * Connections: Quick couplings, front/rear hydraulics * Front Loader Compatibility: yes * Attachments/Equipment Features * Front Loader: * Rear Hydraulics: available * Quick Change Systems: available, type (e.g. oil hose quick change system) * Front Attachment (e.g. front hydraulics) * Cabin and Ergonomics * Cabin Type: enclosed operator cabin * Field of View: 360° all-round visibility, large front window * Driver Comfort: Steering wheel adjustment, seat comfort, air conditioning/heating * Operation: Joysticks/multifunction lever, button layout * Noise Level: typical value in the interior (dB/A) * Electrical System and Systems * On-board Voltage: 12V * Display/Control Panel: Multifunction display, telemetry option * Safety: Hill start assist, optional reversing camera, retractable warning signs * Diagnostic System: OBD/manufacturer diagnostic tool available * Safety and Protection * Rollover Protection (ROPS)/Sun Visor: available * Seat Belts: 3-point seat belt Iodpfx Acezl Itge Eetk * Hydraulic Protection/Covers: Fenders, covers * Lighting: Work lights front/rear, turn signals * Maintenance and Condition * Maintenance Condition: regular maintenance according to manufacturer's schedule * Oil/Filter Change Intervals: according to manual * Special Features (reflection of equipment) * Modern Comfort Package: Air conditioning, radio, USB port * Telemetry Option: Fleet management available * Safety Extras: Reversing sensor/camera, immobilizer * Fassi loading crane F135A.2.23 * Linear remote control * Hydraulic winch V20 * 3-point support * Swivel supports * Operation with two-shell grapple possible * Additional hydraulics at crane tip with quick coupler * 420° swivel range The JCB machine is available immediately, subject to prior sale.

Condition: excellent (used), Year of construction: 2017, operating hours: 100 h, functionality: fully functional, overall weight: 300 kg, Tray-Loader TL-6040 - 2-lane stack-on module for the economical transport of trays (boxes) for printed circuit boards. The empty trays are removed from the transport carriage, automatically positioned and made available for assembly. After placement, the trays are automatically destacked on a 2nd transport trolley. - Compact design Itedpfjunh I Nox Ac Eek - Small floor space - Stacking module - Transport trolley - Standard tray size: 400 x 600 mm - Sturdy welded steel frame - W x D x H: 840 x 1,330 x 1,870 mm - Manual operating height: 930 - 1,050 mm - Compressed air 0.6 mPa (6bar), oil-free, filtered, dry - Average consumption approx. 10l/min - Ambient temperature +18°C - + 30°C - Weight approx. 300 kg

Year of construction: 1989, condition: ready for operation (used), An industrial etching machine from a printed circuit board manufacturing facility for the alkaline development of photoresists is offered. Process sequence: infeed, etch chamber, replenisher, 3-stage rinse, drying and outfeed, max. working width: 550mm, printed circuit board thickness range: 0.2mm-4.0mm, conveyor speed: 0.4m/min-2.5m/min. Including a Nubal unstacker, a drip tray X/Y: 3900mm/1600mm and a 200l dosing unit with agitator. Machine dimensions X/Y/Z: approx. 4000mm/1300mm/1400mm. An on-site inspection is possible. Itedpfsznx Igsx Ac Esk

Condition: excellent (used), functionality: fully functional, An old gem – anyone familiar with this device swears by it. Includes 2 devices and a box of spare parts, including circuit boards, etc. Isdpfx Acexk Ty Ne Estk Total price for the entire package of 2 devices, including the spare parts kit: €2,600. Delivery is included! Price for one device: €1,400.

Condition: like new (used), functionality: fully functional, power: 298 kW (405.17 HP), Year of construction: 2022, operating hours: 118 h, Equipment: UVV, Weight: approx. 65,000 kg Max. working height: 28.15 m Extremely sensitive – incredible reach Undercarriage hydraulically extendable to 4.50 meters Itedpfx Ajzaqp Usc Ejk Engine: Cummins QSG12: water-cooled 6-cylinder engine with Common Rail injection and AdBlue Stage V, 298 kW / 405 hp (2,100 rpm) Hydraulics: Load Sensing, max. 2 x 360 l/min 1st proportional auxiliary control circuit for grapple/hammer on joystick 1 2nd non-proportional auxiliary control circuit for auxiliary equipment on joystick 2 Safety check valves for boom and jib with overload indicator Quick coupler hydraulic circuit, double-acting Swing brake 2 travel speeds ROPS driver cabin, adjustable Protective grille ISO for roof Protective grille ISO for windshield Boom and arm (supplied with a separate support for transport) Demolition boom and arm (28 m) with intermediate joint (supplied with a separate support for transport) Adjustable undercarriage from 3,340 to 4,500 mm Steel tracks 600 mm Battery main switch Travel alarm and rotating beacon Engine emergency stop switch LED light bar on driver cabin LED spotlights 2x on boom LED spotlight 1x on toolbox 12V socket Document compartment Radio with speakers AUTOMATIC CLIMATE CONTROL Rear view camera 8 x auxiliary circuit flow setting via on-board computer with multi-function monitor Floor mat Cup holder Angle warning for working outside the safety angle (75 degrees) Air-sprung seat with fabric cover and seat heating Fueling pump All-round view camera

Year of construction: 2016, condition: used, overall weight: 300,000 kg, total length: 16,000 mm, total width: 9,000 mm, total height: 8,000 mm, Waldrich Coburg 17 S-10 FP 300 NC / 5 m – CNC Gantry Milling Machine Machine: 17-10 FP 300 NC / 5 m Serial Number: 2.8304.06 Original Year of Manufacture: 1983 In 2016, it was comprehensively overhauled and modernized by the manufacturer Waldrich Coburg. The machine is equipped with a modern Siemens SINUMERIK 840D sl control system and is ideally suited for heavy-duty machining of large and complex workpieces in machine, tool, mold, and power plant construction. The delivery includes a Universal Fork Milling Head USP 300 C 350 with B-axis as well as an additional Angle Milling Head WFU 500 SZ 400 F17, ensuring versatile machining capabilities for demanding milling tasks. The machine features a modern full protective enclosure, coolant system, chip conveyor technology, and extensive technical documentation including circuit diagrams and overhaul documentation. The system has been professionally dismantled and packed in containers. It is located at the Port of Hamburg and is immediately available and ready for worldwide shipment. Manufacturer: Waldrich Coburg Overhauled by Waldrich Coburg (2016) Siemens SINUMERIK 840D sl Universal Fork Milling Head USP 300 C 350 Additional Angle Milling Head WFU 500 SZ 400 F17 Workpiece weight up to 100 t Full protective enclosure Extensive technical documentation available Dismantled and ready for loading Location: Port of Hamburg, Germany Immediately available Tool holder type: ISO 50 Travel X-axis: 5700 - mm Movement B-axis: 0 - 180 ° Dimensions (LxWxH) approx.: 16000 x 9000 x 8000 mm Passage between the uprights: 3,500 mm 5-axis machining: Yes Travel Y-axis: 3500 - mm Weight approx.: 300,000 kg Travel W-axis: 800 - mm Travel Z-axis: 2050 - mm Year of construction: 2,016 Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: FOB Free On Board under power: No Isdpfjzc Sagex Ac Estk

Condition: used, functionality: fully functional, power: 209 kW (284.16 HP), operation weight: 32,264 kg, Year of construction: 2022, operating hours: 4,950 h, Equipment: UVV, Year of manufacture: 2022 Engine power: 284 hp (208.8 kW) Operating weight approx. 32,265 kg Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Itodpfx Acszaqlis Ejk Swing speed 9 rpm Max. travel speed 5.2 km/h Rear and side camera LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Engine: Cummins QSL9-C280 engine Water-cooled, 6-cylinder, with common rail injection and Adblue Stage V Power 209 kW / 285 hp; 2100 rpm 1,472 Nm / 1400 rpm Displacement 8,900 ccm Sensor-controlled idle automatic Cyclone pre-filter Hydraulics: State-of-the-art, optimized, demand-flow-controlled hydraulic system (positive flow controlled) Hydraulic load sensing Max. oil flow 2x 280 l/min Max. oil flow AUX1 500 l/min 1st proportional auxiliary control circuit for grab/hammer on joystick 1 2nd proportional auxiliary control circuit on joystick 2 Safety check valves for stick and boom with overload indicator Quick coupler hydraulic circuit, double-acting Adjustable oil flow rate for attachments Adjustable oil pressure for attachments Convenient switching of hammer/shear hydraulics in the display Hydraulic pre-control of the joysticks 10x additional circuit flow rate settings via on-board computer with multi-function monitor Swing brake 2 travel speeds Upper and lower carriage: Boom 6,150 mm, stick 3,200 mm, max. reach 10,870 mm Heavy-duty undercarriage and equipment with wear strips Steel tracks 600 mm Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Rear and side camera Battery main switch Fueling pump with automatic overflow protection Tool compartment Driving alarm and rotating beacon LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Transport dimensions: (L x H x W) 10,667 x 3,225 x 2,990 mm Operator cabin: ROPS Engine emergency stop switch 12V socket Document compartment Radio, Bluetooth-enabled with hands-free function for smartphone with speakers Automatic climate control Heater Tilting front window Large 10" high-resolution touch display Joystick adjustment independent of seat adjustment Floor mat Cup holder Air-suspended seat with fabric cover and seat heating

Year of construction: 1999, condition: good (used), Control or regulator card, type ETR 51. The circuit board was manufactured by Plastic Service GmbH. Itedpfx Acszl T S Ue Eok 11 pieces available.

Condition: used, functionality: unexamined, Year of construction: 2015, MAGAZINE LOADER, magazine loading system, magazine loader, shuttle magazine unloader, magazine feeder, magazine unloader, connecting conveyor, magazine loading system for large circuit boards, destacker: YJ LINK ALD-CE SINGLE MAGAZINE LOADER Working height: 950 +/-20 mm Working width: 250 - 510 mm Size: 1400 x 1420 x 1830 mm (WxDxH) (2x) YJ LINK magazine loading system for large circuit boards Size: 1500 x 2850 x 1830 mm (WxDxH) YJ LINK ALD-CE magazine loader Ijdpfxsv Hpble Ac Eotk This device is located at the beginning of the SMT line. It transfers printed circuit boards (PCBs) stacked in a magazine rack to the downstream machine one at a time using a pneumatic pusher. Touch screen (control panel) Controlled by PLC (Programmable Logic Controller) SMEMA interface YJ LINK AUD-CE Shuttle Magazine Unloader Shuttle Magazine Unloader Located at the end of the SMT line, this device consists of a combination of a single shuttle and a double lifter. It stacks printed circuit boards (PCBs) one at a time into an empty magazine rack using a pneumatic pusher mounted on the single shuttle. LED tower lamp (with buzzer) Touch screen (control panel) Controlled by PLC SMEMA interface Integrated single shuttle conveyor YJ LINK ADL-CE Magazine Feeder The YJ LINK ADL-CE is an automatic magazine feeder used in SMT production lines to efficiently load printed circuit boards (PCBs) into magazines. YJ LINK AMB-CE Magazine Unloader YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them into magazine racks YJ LINK ACC-CE Connecting Conveyor Size: 1500 x 610 x 950mm (WxDxH) YJ LINK AMB-CE Magazine Unloader YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them into magazine racks YJ LINK ADL-R90 Destacker Destacker ￭ LED tower signal light (with buzzer) ￭ Touch screen (operator panel) ￭ Controlled by PLC ￭ SMEMA interface ￭ 40 pcs stacking capacity at 1kg ￭ Safety light barrier on the screw ￭ Automatic width adjustment ￭ Double plate structure Transport height: 950mm ± 20mm Color: EX8816(S)-SR-WH020 (KCC) Conveying direction: Left to right / Right to left Fixed rail: Front / Back PCB edge: 3mm PCB thickness: 1.0mm ~ 2.0mm Conveying speed: 200mm/s Conveyor belt: Antistatic 10¹⁰ ~ 10¹², temperature: 70˚C Air supply: 0.5Mpa (5 bar) Air consumption: 4 ℓ/min Power consumption: 430W Power supply: 230V / 50~60Hz, 1 phase

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Itodpfxszghf Es Ac Esk

Condition: used, Year of construction: 2024, Rear section Primera DMC 4200 l 1-fold conveyor section Single-shoot distributor heads / f. 16 rows Long loading board for rear section Drawbar with folding support foot / lower linkage attachment Cat. 3 braked axle with parking brake / dual-circuit air brake system Ijdsuhnwvjpfx Ac Eotk

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible. Ijdjw Ni Ibopfx Ac Eotk

Condition: excellent (used), Keysight / Agilent InfiniiVision MSO-X 3034A Manufacturer: Keysight Technologies / Agilent Technologies Type: MSO-X 3034A Series: InfiniiVision Device Type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz For sale is a used Keysight / Agilent InfiniiVision MSO-X 3034A Mixed Signal Oscilloscope. This oscilloscope is suitable for precise signal and measurement tasks in development, laboratory, service, training, research, as well as industrial electronics and quality assurance. With 4 analog channels, 16 digital channels, and a maximum sampling rate of 4 GSa/s, the device offers versatile applications for demanding measurement tasks. Technical Data Manufacturer: Keysight Technologies / Agilent Technologies Series: InfiniiVision Type: MSO-X 3034A Device Type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz Analog Channels: 4 Digital Channels: 16 Max. Sampling Rate: 4 GSa/s Display: Color display MegaZoom Technology Inputs: 4 × BNC analog Logic/Digital Input USB Host USB Device Trigger Out External Trigger / Calibration Connector Power Connection: 100–240 V AC Frequency: 50 / 60 Hz Power Consumption: max. 100 W Dimensions (W × H × D): approx. 381 × 204 × 142 mm Weight: approx. 4 kg Features Large color display Front-panel control buttons 4 analog channels 16 digital channels MegaZoom Technology USB Host USB Device Trigger and analysis functions Measurement, storage, and printing functions Carrying handle 3 probes as shown in the pictures Power cable Accessories as shown in the pictures Itjdpfx Acjzh I Dws Esk Application Areas Electronics development Laboratory Service Troubleshooting Signal analysis Printed circuit board testing Training Research and development Quality assurance Industrial electronics Scope of Delivery Keysight / Agilent InfiniiVision MSO-X 3034A 3 probes as shown in the pictures Power cable Accessories as shown in the pictures Condition Used. Optical condition as shown in the pictures. Inspection seals/stickers as shown in the pictures are present. Scope of delivery as described and shown in the pictures. Subject to changes, errors, and prior sale.

Condition: used, Painting line Itedpfezuzg Sjx Ac Esk Manufacturer: Giardina, Rich Fruit, Neomec, Kremlin The painting system is designed for painting elements made of MDF or HDF boards. The spray booths have two circuits, one for clear coats and one for colored paints. The system is designed for water-based UV coatings. The system consists of the following elements: Infeed Manufacturer: Neomec Conveyor table with a cleaner Spray painting machine Manufacturer: Giardina Type: Dualtech 416 Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Turntable Conveyor table Conveyor table with a cleaner Spray painting machine Manufacturer: Rich Fruit Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Each booth has two circuits, one for paint and one for coatings, driven by KREMLIN pumps and spray guns from the same company. Length of the machine line: 92 m Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Year of construction: 2009, condition: ready for operation (used), Industrial Pill etching machine from a printed circuit board manufacturing facility. Process stages: infeed section, etching chamber, replenisher, 4-stage cascade rinse, drying and outfeed section, max. working width: 650mm, PCB thickness: 0.1mm-3.2mm, conveyor speed: 0.5m/min-5.0m/min, max. process temperature: 55°C. Including a magnetic centrifugal pump for the etching chamber, one tank X/Y: 3500mm/2200mm and one Lantronic stacker. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1300mm. An on-site inspection is possible. Iodpfx Acjznx Imj Estk

Condition: excellent (used), Epson G10-854SR Robot Assembly Station, Dispensing Station The assembly station is divided into the sub-stations 3.1 Dispensing Area, 3.2 Assembly Area Cooler + End Plate, and 3.3 Front Assembly Area. (Cooler = Heat Sink, End Plate = End Plate Angle) St. 3.1: Dispensing Area - A WT (Work Tray) with attached chassis and circuit boards enters the dispensing area via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place. - The x-y-z handling system then moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling system moves over the rest position, and the WT is placed back onto the belt. - Further transport to the assembly area Cooler + End Plate (condition: no WT in the assembly position). St. 3.2: Assembly Area Cooler + End Plate - A WT from the dispensing area enters the assembly area Cooler + End Plate via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place, while the side walls of the chassis of the partially assembled unit are aligned. - Simultaneously, the cooler tray and end plate tray are positioned. - A stack of cooler trays (12) and a stack of end plate trays (12) are manually placed on the respective infeed belt outside the protective enclosure. - The two safety gates are opened, and the loaded tray stacks move into the gripping position of the respective stacker. - The two safety gates are closed again. - The respective grippers grasp the corresponding tray. - The z-axis separates the trays and transports them upwards (above the actual picking height). - A centering support is pushed and positioned under the respective tray using x-axis movement for centering and tray stabilization. - The respective stacker's z-axis places the respective tray on the corresponding centering support. - The trays are ready for component removal. - The multi-gripper on the SCARA robot grips the cooler in the tray and places it in an intermediate position as an alignment aid (to compensate for inaccuracies when picking from the fixed gripping position for assembly). - The cooler is scanned, gripped again, and, if the scanner result is positive, mounted on the WT. - The non-conforming cooler is placed in a non-conforming box. Itjdjibx S Nopfx Ac Esk - The multi-gripper on the SCARA robot then grips the end plate in the tray and places it in the alignment position. - The end plate is gripped again and mounted on the WT. - Continues with the front assembly area. Technical Data Design: SCARA (4-axis robot) Load capacity: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation reach: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400 °/s Permissible moment of inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Pressing force: 250 N Weight: 48 kg Controller: EPSON RC180 Type of mounting: Ceiling IP protection class: IP20 Power and signal cable: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: new, DEMAG Spare Parts: 1. Transmitter / Circuit Board DRC - DR D3 2. Load Measuring Pin DMR 20 3. CAN Safety Transceiver 4. Brake Ring / Conical KB 160 B - 2 pieces 5. Brake Ring / Conical KB 100 B - 2 pieces 6. Clutch Set 7. Brake Disc 13KF - 3 pieces 8. Swivel Eye DK 20 - 2 pieces 9. Torque Support Set MA 125-1 - 2 pieces Isdewug Nuspfx Ac Estk 10. Magnet Body for Brake B140 - 1 piece + B050 - 2 pieces 11. Wire Rope Diameter 16 mm - 35 meters 12. Wire Rope Diameter 10 mm - 62.8 meters 13. Gear Limit Switch DGS 3

Condition: ready for operation (used), A comprehensive spare parts package for the Arburg Allrounder 221 series is available. 1) Mechanics/Hydraulics/Plasticizing: 6x ejector piston rod, 3x pressure relief valves, clamping cylinder seal kit, 5x ejector seal kit, injection unit seal kit, cylinder D30, screw D30, 20x disc spring D31,5/16,3. 2) Heating/Temperature: 6x barrel heaters 1750W, 5x nozzle heater band 600W, Thermomat, 40x thermocouples. 3) Electrical/Sensors/Switches: 2x coding switch blocks, 6x contact sensors, 5x rocker switches, 2x snap-action switches, 9x switches, 8x microswitches, 2x limit switches, 10x ejector safety switches, 4x initiators, oil level switch, 6x contact pins with contact, 2x pulse counters. 4) Electronics/Control: printed circuit board ARB 279, 2x each membrane keypad ARB 179 and 180, printed circuit board shutdown automation 141, 2x printed circuit board ARB 550, printed circuit board ARB 554. Only package sale is possible. Documentation available. On-site inspection is possible. Ijdpfx Aeycig Djc Estk