Used Climate Chamber for sale (5,419)

Condition: excellent (used), Year of construction: 1983, Longitudinal Flow Dryer – Heating via Electricity or Hot Water Internal chamber length approx. 4500 mm Internal chamber width approx. 750 mm Internal chamber height approx. 600 mm Chamber volume 2.0 m³ Top loading – trunk design Manual / fully automatic control Electronic controller type C Longitudinal ventilation Number of fans: 1 Fan motor power 0.55 kW, 400 V, 50 Hz Electric heater: 4.2 kW INCLUDES: Aluminum stacking strips Dkodpfoy Emqgjx Anwsl Wood moisture measuring probe Operating manual, electrical diagram, etc. Space requirement approx. 5600 mm x 1200 mm x 1600 mm Weight: 400 kg Note on used machinery: • Technical data subject to errors and prior sale. • Quoted prices are ex-location – free loading! • Machines have been cleaned and function tested. • All machines are bought as inspected, without any warranty claims. Buyers are free to inspect the machines on site. • Special agreements only valid in written form. (We will respond to inquiries only if your address and telephone number are provided!)

Condition: excellent (used), Type: UF 450plus Air circulation: forced convection Temperature Temperature range: +20 °C to +300 °C Working range: at least +10 °C above ambient temperature Setting accuracy: Djdpeyzzm Iofx Anwjkl up to 99.9 °C: 0.1 °C from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Interior and Capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of shelves: 8 Load per shelf: 30 kg Maximum total load: 300 kg Interior: Stainless steel, all-around heating External dimensions and Weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical Data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and Regulation Controller: ControlCOCKPIT TwinDISPLAY Regulator: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculating air: adjustable in 10% increments Fresh air: electronically adjustable Exhaust air: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and under-temperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear side with 2 feed-throughs approx. 12 cm diameter each Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data, information is non-binding!) If you have any further questions, we are happy to assist you by phone. For detailed technical data and processing instructions, we strongly recommend consulting the original datasheets or obtaining information directly from the manufacturer.

Condition: used, Chamber oven Borel Dkodpfx Asymx Hzonwsl Type: 11-73 Light dimensions (W x D x H) chamber above: 240 x 410 x 90 mm chamber below: 200 x 320 x 60 mm Heating power: 15 kW at 3 x 380 V AC, N, PE Max. temperature: 1400 °C Without control cabinet.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, New machine warranty, in-stock item, original packaging, available for immediate delivery. Equipped with a safety system for solvent-based substances according to DIN 1539. Matching loading carts in stock (see photo). Contact us! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters Dkedpfol Dw T Aox Anwjl - Max temperature: 260°C - Controller: P570 / 50 programs, each with 40 freely programmable segments - NtLog for data logging via USB stick - Air circulation: 3600 m³/h - Exhaust air flow: 390 m³/h - Additional features: drive-in rails - Connected load: 39 kW - Net weight: 1150 kg - Including documentation, CE declaration Installation and commissioning available upon request. Inspection at our warehouse possible by appointment. We offer new and used industrial ovens. Contact us! Keywords: Oven, Ovens, Drying oven, Firing kiln, Heat oven, Heating cabinet, Industrial oven, Convection oven, Convection chamber dryer, Tempering oven, Preheating oven, Temperature oven, Drying cabinet, Chamber kiln, Curing oven, Forced-air drying cabinet, Forced-air oven, Solvent oven, Chamber dryer, Paint dryer.

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 205 mm, total width: 425 mm, total height: 1,650 mm, DGUV certified until: 05/2027, NEW +++ NEW Climate Control Unit for Proofing Room NEW +++ NEW For optimal heat + humidity “The ideal solution for climate control in proofing cabinets and prepared rooms.” Key features: - Energy saving - Easy installation and operation - Max. operating temperature: 60 °C - Humidity up to 95% - Adjustable temperature and humidity - For proofing rooms up to 12 m³ - Plug-and-play floor-standing unit Connection 400V, 16A-CEE plug Brand new unit with warranty + spare parts service Further bakery machines available from stock! Dsdpexbm Tqjfx Anwskl

Condition: new, functionality: fully functional, mileage: 77,000 km, power: 130 kW (176.75 HP), first registration: 01/2022, fuel type: diesel, next inspection (TÜV): 05/2028, fuel: diesel, color: grey-black, gearing type: automatic, Equipment: ABS, Android Auto, Bluetooth, air conditioning, airbag, central locking, cruise control, full service history, onboard computer, power assisted steering, seat heater, sliding door, soot filter, traction control, trailer coupling, truck registration, Peugeot Expert automatic with 177 hp Cargo area conversion Djdpoy H Dppjfx Anwskl Automatic climate control Tow hitch Camera and much more. We are happy to offer you financing!

Condition: used, Year of construction: 1980, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 8654;, Machine is working we do different types of packaging Dodpfxey Aqhqe Anwokl

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 150 h, power: 90 kW (122.37 HP), fuel type: electric, Equipment: CE marking, documentation/manual, Industrial Heat Treatment Furnace – 17 m³ | 400°C | Siemens PLC | Like New Price: €104,100 (approx. 38M HUF) Location: Hungary High-performance industrial heat treatment furnace in excellent condition, designed for precise and reliable thermal processing across multiple industries. Commissioned in April 2024 – only 150 operating hours. Key Specifications • Chamber volume: 17 m³ • Max temperature: 400°C • Temperature uniformity: ±5°C • Heating power: 90 kW (electric) • Control: Siemens PLC with touchscreen Dkodjy Izkmopfx Anwel • PID temperature control • Recipe storage & data logging • 8 temperature sensors • Fresh air & exhaust system • Frequency-controlled fans • CO₂ fire suppression system • Dual-side door access Applications • Wood heat treatment (thermowood) • Furniture and parquet production • Composite curing • Coating / paint baking • R&D applications Advantages • Industrial-grade performance • Excellent temperature precision • Energy-efficient insulation • Fully automated operation • High safety standards ✔ Available immediately ✔ Inspection under power possible ✔ Dismantling and loading support available

Condition: good (used), Year of construction: 2000, Chamber Oven Miwe Ideal Djdpoyzy Eiofx Anwokl - Model 600/6R - used - year of manufacture: 2000 - area: 6 sqm - manual control - 6 chambers, each 0.6 x 1.6 m - hood with fan - oil or gas burner - oven from production - technical condition: good - price on request

Year of construction: 2008, condition: excellent (used), Wachtel Piccolo II Bakery Oven - used - year of manufacture: 2008 - electric Dksdpfxsx Rbpuj Anwel - 4 chambers 1.2 x 0.8 m - manual control - steam generators for all chambers - power: 25 kW - oven on mobile base - without hood - device overhauled - price on request

Condition: good (used), Year of construction: 2000, Matador MD 151 Bakery Oven - used - year of manufacture approx. 2000 - surface area 15 sqm - manual control - 5 chambers, each 1.8 x 1.6 m - hood with fan - machine from production - requires inspection/overhaul Dodpfx Aey Alhlsnwskl - overall technical condition good - collection from warehouse/shipping possible - price on request

Condition: good (used), Wachtel Infra bakery oven – used – year of manufacture 2008 – surface area 8 sqm – 4 chambers of 1.2 x 1.6 m – manual control – steaming for each chamber – oven from production – good technical condition – collection from warehouse – price on request Dkedpex Hgxyjfx Anwsl

Condition: excellent (used), Year of construction: 2016, Hein Universal Tube-Type Bakery Oven - Model: EA 2 6060 - Year of manufacture: 2016 - Area: 22 sqm - 6 chambers, each 1.8 x 2.0 m Dkjdpfx Aexwwu Dsnwel - Hood with fan - Semi-automatic device Spider/Hewa - Vacuum cleaner - Computer control - Technical condition: very good - Self-collection from bakery or warehouse - Price on request

Condition: new, Year of construction: 2026, Equipment: CE marking, documentation/manual, NIMF-15 treatment chamber integrated in a 40-foot sea container. Capacity 300 Europalets. It is sent totally finished, arrive, place power supply and start working. Very fast and economical model performing the heat treatment. Dksdpjy Hhh Njfx Anwol Approved program in all countries, with 3, 4 and 5 probes. 1 year warranty

Year of construction: 2025, condition: new, NIMF-15 treatment chamber integrated in a 20-foot sea container. Capacity 130 Europalets, or +/- 10m3 of wood It is sent totally finished, arrive, place power supply and start working. Very fast and economical model performing the heat treatment. Approved program in all countries, with 3, 4 and 5 probes. Dkedpfx Ashw Nryonwjl 1 year warranty

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 150 h, functionality: fully functional, total width: 2,920 mm, total length: 5,720 mm, total height: 3,360 mm, maximum load weight: 50 kg, heating capacity: 59 kW (80.22 HP), warranty duration: 6 months, input frequency: 50 Hz, year of last overhaul: 2026, 4-chamber ultrasonic cleaning system with automatic goods transport Maximum loading weight: 50 kg including basket Usable basket dimensions (internal): 426 x 375 x 470h mm Loading station with transport trolley 1. Ultrasonic cleaning with bottom and side sonication (25/45 kHz - switchable) 2. Ultrasonic rinsing with bottom sonication (25/45 kHz - switchable) 3. Ultrasonic rinsing with bottom sonication (25/45 kHz - switchable), including lift-out function 4. Hot air dryer Unloading station - Tank 1 (ultrasonic cleaning) is also equipped with an overflow and a large separate oil separator. - Automatic cover on Tank 1 - Media filtration in all tanks (via cartridge filter) - Complete system enclosed and with exhaust extraction - Control system: Siemens S7-1500 incl. 12" HMI touch panel - Documentation available in German Electrical connected load: 59 kW The system can also be dismantled and re-installed at a new location by our specialist technicians for an additional charge, if required. Dkjdpsy H Uzvjfx Anwel Water treatment for Tank 4 (final rinse) can be supplied at extra cost. Test cleaning possible at any time, the system is powered up.

Condition: used, mileage: 173,326 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,430 mm, first registration: 05/2019, fuel tank capacity: 72 l, CO₂ emissions: 164 g/km, emission class: euro6, color: red, number of seats: 3, number of previous owners: 2, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, trailer coupling, General information Number of doors: 5 Model range: Jun 2016 - Aug 2019 Cab: single Technical information Torque: 330 Nm Number of cylinders: 4 Engine capacity: 2.143 cc Transmission: 6 gears, Manual gearbox Acceleration (0-100 kph): 12,8 s Top speed: 184 km/h Measures length/height: L3H1 Dimensions (LxBxH): 537 x 193 x 199 cm Weights Empty weight: 1.974 kg Carrying capacity: 826 kg GVW: 2.800 kg Interior Interior: black Consumption Average fuel consumption: 6,4 l/100km (44 MPG) Urban fuel consumption: 8,2 l/100km (34 MPG) Extra urban fuel consumption: 5,3 l/100km (53 MPG) Maintenance, history and condition APK (MOT): tested until 10/2026 Number of keys: 2 (2 hand transmitters) Dkodoyh Nfnspfx Anwjl Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Automatic dipped headlights - Bluetooth car kit - Climate control - Driver's airbag - Electrically adjustable door mirrors - Electrically operated front windows - Front and rear parking sensors - Front central armrest - Front fog lights - Heated door mirrors - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Loading floor - Multifunctional steering wheel - Panelling - Partition - Passenger airbag - Radio - Rear doors - Remote central locking - Reversing camera - Sliding side door right - Start / stop system - Telephone enabled with Bluetooth - Third brake light

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 5,400 mm, inner dimension width: 750 mm, inner dimension height: 850 mm, total length: 6,500 mm, total width: 950 mm, total height: 1,500 mm, number of chambers: 1, control type: PLC-controlled, fuel type: electric, We are offering this very well-maintained Lauber longitudinal flow dryer type 2 S6 chamber dryer, year of manufacture 2022. Type/Plant No.: 2 S-6 / 44217 Rated voltage: 3pH AC 400/230 V 50 Hz Fan motor rated power: 1.1 or 0.75 kW Fan motor rated current: 7.1 A Dodpfsy Hdmnsx Anwekl Electric heater rated power: 7.5 kW Total rated power: approx. 15 kW Total rated current: 25 A Pre-fuse (slow-blow): 25 A Control voltage: 24 V DC Wiring diagram no.: SP361 RV Year of manufacture: 2022 Technical details: A double-shell thermal insulation of the wood dryer guarantees excellent insulation properties. The inner wall cladding is made from 1.5 mm thick, seawater-resistant special aluminium and is tightly welded. The outer cladding consists of stucco trapezoidal and stucco smooth sheet metal. The thermally insulated floor is designed as a tightly welded stainless steel tray and is permanently resistant to aggressive wood substances. The wood dryer should be installed on a stable, level surface; no special continuous foundation is required! A front door with a wide opening angle and all-round rubber seal ensures convenient operation and high steam tightness. An aluminium trolley for side loading and unloading, along with interior rails and removable exterior rails, enables comfortable and space-saving loading. Efficient and uniform longitudinal ventilation of the wood stack is ensured by a powerful radial fan (0.55 kW) mounted on the end face. The chamber is heated by electric heating rods with a heating capacity of 6.0 kW. Excess moisture is extracted via servo-controlled 100 mm intake and exhaust dampers. Chamber humidity can be increased if necessary by cold water atomization. 140 straight aluminum stacking battens are included in the delivery. The standard PLC control (SPS) regulates the drying process fully automatically and, thanks to a 7'' color touch panel, offers user-friendly operation. Simply enter three parameters: 1. Wood species 2. Lumber thickness 3. Desired final moisture content Based on this data, the system optimally controls the drying process, allowing you to obtain your wood in the desired quality in a short time. The standard control equipment includes: - 3 pcs. wood moisture measuring points with drive-in electrodes and sensor cables - 1 pc. wood equilibrium moisture measuring point - 1 pc. air temperature sensor We supply the Lauber wood dryer fully assembled and ready for connection! Detailed operating instructions, drying recommendations, as well as installation and loading instructions are included. Original price: EUR 31,120 plus VAT Previous lead time: 15 months The dryer has been used for around 30 drying cycles and is in very good condition. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2003, inner dimension length: 7,400 mm, inner dimension width: 4,500 mm, inner dimension height: 4,250 mm, number of chambers: 1, Equipment: CE marking, documentation/manual, Drying chamber Manufacturer: Mühlböck Model: ZLSM Year of manufacture: 2003 Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) Dkedpfxjy Evkps Anwol 3 fans, each 3 kW 10 measuring points With frequency inverter With control system Heating capacity: 223 kW Water temperature: 85 °C Water flow rate: 14 m³/h Voltage: 230/400 Volt Connected load: 12 kW Fans: 3 x 3 kW Control system: MB Intellevent 5000 program The unit was previously connected to a central heating system. Central heating system not included! Drying chamber will be professionally dismantled and loaded onto a truck.

Condition: used, Year of construction: 2005, inner dimension length: 14,000 mm, inner dimension width: 1,250 mm, inner dimension height: 1,850 mm, total length: 15,900 mm, total width: 2,500 mm, total height: 3,000 mm, overall weight: 12,000 kg, Equipment: CE marking, No. 3262 Vacuum dryer / drying chamber Kronseder KCT 2400 Used, year of construction 2005 The machine was in operation until 2024 and remains connected to electricity and hot water until July 2026 Capacity approx. 32 m3 Heating via hot water Stainless steel chamber Chamber diameter approx. 2000 mm External length of chamber approx. 15000 mm Internal length of chamber approx. 14000 mm Width of wood stack 1250 mm Height of wood stack 1850 mm Dkedpfjyy R D Tex Anwel Transport dimensions approx. 15900 x 2500 x 3000 mm LWH Weight approx. 12000 kg Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 1,100 kg, total length: 6,200 mm, total width: 1,000 mm, total height: 1,900 mm, loading space length: 4,500 mm, loading space width: 800 mm, loading space height: 600 mm, tank capacity: 2,100 l, KIT 250 For joiners, carpenters, musical instrument manufacturers, woodturning shops with 1.5 - 2.5 cubic meters of wood stacking space and a stack width of 0.80 m - 1.00 m. The energy-saving system works according to the principle of conventional drying with a supply air flap and an exhaust air flap. an exhaust air flap. The vacuum pump is used for rapid dehumidification. Dedpfxetqlp Rj Anwekl

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,850 kg, total length: 6,000 mm, total width: 1,700 mm, total height: 1,900 mm, loading space length: 5,300 mm, loading space width: 900 mm, loading space height: 1,100 mm, energy consumption: 3 kWh, tank capacity: 5,200 l, Test dryer EUROVAC vacuum dryer KVT 550 For further information please contact us. Dodpfetqlqajx Anwekl

Condition: used, functionality: fully functional, 2 pcs electrically heated recirculating chamber ovens with extraction fan Type: ITVU Connected load: 40 kVA Heating capacity: 36 kW Max. temperature: 250°C Internal dimensions (W x H x D): 1600 x 1800 x 1650 mm Cart dimensions (W x H x D): 1330 x 970 x 1410 mm Dedpfx Ansy Egbxswskl

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Dkedpfxjuhmace Anwjl Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m Dkjdofrvzvspfx Anwol injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair in the overhaul plant. It can be carried out in the scope of agreement.