Used Cnc Horizontal Borer for sale (13,777)

Condition: as good as new (ex-display), Year of construction: 2022, CNC turning machine Goodway GS 3300 LY Turning diameter: 570 mm Bar capacity: 91 mm Turning length: 1500 mm Fanuc OTi control 3-jaw chuck: 315 mm Ndedpfx Akjzw Ub Ujqjc Y-axis and C-axis Spindle speed: 3000 rpm Tool holder: AGW BMT 55 Gearbox Tailstock Steady rest

Condition: as good as new (ex-display), Year of construction: 2022, • Hwacheon Cutex 180 AL YSMC, year of manufacture 2023, new machine • Control: Fanuc 0i-TF Plus LCD with Manual Guide I • Rapid traverse X / Z / B: • 36 / 36 / 36 m/min • Y-axis travel: +/- 55mm • Max. turning diameter: Ø 300mm • Max. turning length: 478.5mm • Chuck size: • 6” / Ø 150mm, 5” / Ø 120mm • Max. spindle speed: • Main spindle 6,000 rpm • Sub spindle 6,000 rpm • Bar capacity: Ø 51 / 32mm • Main/Sub spindle motor power: • 11 / 15 kW, 3.7 / 5.5 kW • 12-station turret, all stations driven • 5,000 rpm 3.7 / 5.5 kW • Robust one-piece slant-bed made from stabilized Meehanite cast iron, with precision linear guideways on all axes • Powerful spindles with spindle nose A2-5 / Sub A2-4 • Automatic tool presetter • Parts catcher • Full enclosure • Hydraulic system • Coolant system with movable tank, 6 bar pump Ndsdpozw Udisfx Akqjc • Ergonomic pivoting control panel • Electronic handwheel • Waterproof LED work area lighting • Transformer

Condition: as good as new (ex-display), Year of construction: 2023, Control: Fanuc Turning diameter: 400 mm Turning length: 560 mm Swinging diameter: 690 mm Bar capacity: 81 mm Rapid traverse rate: 30 / 10 / 30 m/min Main spindle Bar capacity: 81 mm Chuck size: 250 mm Spindle speed: 3,500 rpm Spindle power: 25.5 kW Spindle torque: 424 Nm Tool turret Technology: 12 stations Tool drive: 5,000 rpm Power: 5.6 kW Torque: 53.4 Nm Tool interface: BMT-65 / BH Ndodpfezw Uf Hjx Akqoc Travel X: 240 mm Travel Z: 120 mm Travel Y: +/-60 mm

Condition: good (used), machine/vehicle number: 16872, Year of construction: 2019, operating hours: 3,104 h, load capacity: 1,600 kg, lifting height: 800 mm, load center: 1,200 mm, fuel type: electric, mast type: simplex, construction height: 1,660 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,600 kg, enginetype: Electric, manufacturer: Still Ndsdpfx Asym Hyvekqec Serial Number: F21081V00001 Battery Details: 24V 3NXS 420Ah BJ:2019

Condition: good (used), Year of construction: 2004, Daewoo Puma 2000 LSY lathe Year of manufacture: 2004 CNC control: FANUC 18i-TB Maximum diameter over the bed: 600 mm Maximum turning diameter: 330 mm Maximum turning length: approx. 510 mm Travel of axis X: 250 mm Travel of axis Z: 780 mm Travel of axis Y: ±50 mm Travel of the counter-spindle: approx. 780 mm Bar diameter: 65 mm Spindle speed of the main spindle: up to 4,500 rpm Power of the main spindle: approx. 15–18.5 kW Nedpj Ad U Huefx Akqodc Spindle speed of the counter-spindle: up to 6,000 rpm Power of the counter-spindle: approx. 7.5 kW Number of tools in the turret: 12 positions Speed of driven tools: up to 5,000–6,000 rpm Power of driven tools: approx. 3.7–5.5 kW Chip tray (no chip conveyor) Weight: approx. 5,350 kg Tools Documentation

Condition: good (used), Year of construction: 2008, operating hours: 40,781 h, functionality: fully functional, pressing force: 56 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, type of input current: three-phase, input voltage: 400 V, overall weight: 16,000 kg, power: 22 kW (29.91 HP), input frequency: 50 Hz, Horizontal full automatc press, with conveyor Ndsdpfx Akez Tftfjqec

Condition: good (used), Year of construction: 1999, 1 Muratec MT12 CNC lathe with dual spindle and dual turret Fanuc CNC control Year: 1999 Ndodpfx Akoy Ta Stsqoc Supplied with all tooling and tool holders.

Condition: used, machine/vehicle number: 005836, X axis working area: 3000 mm Y axis working area: 1000 mm Main Electrospindle power: 3.5 KW Number of controlled axes: 3 axes Ndedewuckuepfx Akqsc Total number of drilling spindles: 82

Condition: used, Year of construction: 1995, CNC portal cutting machine Nedpsyay Dhofx Akqsdc Manufacturer: Messer Type: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Track gauge: 7,000 mm 8 x oxy-fuel cutting torches, type ALFA 8 x Omnilift 200 Without rail system Without table Without filter 191026ä

Condition: used, Year of construction: 1997, CNC turning lathe, cycle-controlled Ndodpez N Ew Nofx Akqjc Manufacturer: VDF Boehringer Type: DUS 560 Year of manufacture: 1997 Control system: CNC Plus Swing diameter over bed max.: 570 mm Turning length: 1,000 mm Spindle head, size 8 according to DIN 55027 Toolholder cross-section H/W max.: 32 x 25 mm Thread pitch: 0.1 – 400 mm Spindle speed: Gear stage 1: Speed range from 3 to 500, stepless Gear stage 2: Speed range from 15 to 2,500, stepless Speed: Main drive: 8,000 min⁻¹ Feed drive X: 2,000 min⁻¹ Feed drive Z: 2,000 min⁻¹ Tailstock: Arbor taper: MK 5 Tailstock displacement by hand Feed rate: longitudinal max.: 10 m/min lateral max.: 5 m/min automatic feeds: longitudinal + lateral 0.01 – 50 Feed force max.: longitudinal 12.5 kN Main drive: 50/21 kW Voltage: 400 V / 50 Hz Total connected load: 50 kVA Accessories: Coolant pump Brinkmann 47 l/min at 0.2 bar Manual chuck Forkardt F 250 Parat quick-change toolholder Weight approx.: 4,000 kg Space requirement L/W/H: 3,150 x 1,800 x 1,800 mm 191026ä

Condition: excellent (used), Year of construction: 2004, FOR SALE – LOT OF 38 MORI SEIKI CNC LATHE MACHINES Sale of a single lot consisting of 38 MORI SEIKI CNC lathes, including: 38 MORI SEIKI L-200V lathes – year 2004. All machines are fully functional and complete, with their tools and tool holders. Ndedpfx Akoz Tp Tcoqec Chip conveyors included. The entire lot is for sale as a single unit only. Photos and additional information available upon request. Price for the lot available upon request.

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Ndodpevctlgefx Akqjc Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 24

Condition: used, machine/vehicle number: 008340, X axis working area: 4400 mm Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 36 Total number of tool changer positions: 30 Ndodpfsy Nkpnsx Akqsc

Condition: used, machine/vehicle number: 006054, X axis working area: 5300 mm Y axis working area: 1300 mm Working Table: Pod and Rail Nsdowcx T Uepfx Akqjdc Main Electrospindle power: 9 KW Number of controlled axes: 5 axes Total number of drilling spindles: 32 Total number of tool changer positions: 8

Condition: used, Year of construction: 2012, operating hours: 10,779 h, functionality: fully functional, turning length: 1,200 mm, spindle bore: 95 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 28,000 W, overall weight: 6,000 kg, Equipment: documentation/manual, NEF600 V3 - 5th Generation Nedpfs Afabgox Akqjdc 2-axis universal lathe with C-axis - Main spindle: Integrated spindle motor - Turret: 12-station disc turret - Standard tool holder: VDI 40 - C-axis brake: hydraulic - Tailstock: Automatic - Coolant system: Coolant system with chip tray - CNC control: Siemens 840D SL ShopTurn and ERGOline control panel - CAD reader: External, PC-compatible - Hydraulic unit: Included in delivery for chuck and steady rest - Hollow chuck: hydraulic - Max. diameter of drawn tube: 95 mm - Coolant spray gun: Included in delivery - Chip conveyor: Discharge to the right - Discharge height of chip conveyor: 1250 mm - Steady rest: Self-centering steady rest Ø 50–200 mm - Chuck: 3-jaw power chuck SMW KNCS 325 - Tool spindle 1: Driven tool holder angled by 90° - Tool spindle 2: Straight 0° driven tool holder - Application of tool spindle: Drilling, milling, and threading - Standard tool holder shank: DIN 69880-40 - Cooling of the control cabinet: up to 40 °C - DMG Netservice on board Various VDI tool holders can be purchased as optional extras. These are NOT included in the price.

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Nsdpfx Aozvhlkskqjdc Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: used, turning diameter 350 mm Ndodpfx Aj Aa A Nvjkqjc turning length 200 till 1040 mm control OSP-P200L weight of the machine ca. 11000 kg

Condition: like new (used), Year of construction: 2018, operating hours: 240 h, functionality: fully functional, travel distance X-axis: 460 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 410 mm, feed rate X-axis: 48,000 m/min, feed rate Y-axis: 48,000 m/min, feed rate Z-axis: 48,000 m/min, controller manufacturer: siemens 828D, controller model: 828D, total height: 2,602 mm, total length: 3,350 mm, total width: 2,265 mm, table width: 320 mm, table length: 320 mm, table load: 250 kg, rotational speed (max.): 200 rpm, overall weight: 6,200 kg, spindle speed (max.): 18,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 60 mm, spindle motor power: 23 W, spindle nose: hsk63, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Due to the cessation of business operations, we are offering this like-new Hardinge H320 horizontal machining center, manufactured in 2018. Nsdpfx Ake Aazdxeqsdc Model: H320 Serial number: GHLB7G0001 Date of manufacture: 05/31/2018 Supply voltage: 400 V Number of phases: 3 Weight: 6200 kg Cooling on the ball screw spindles Spindle cooled Glass scales on all axes High-speed 4th axis with direct drive motor, 200 rpm Scraper chip conveyor It is also possible to take over the tool holders and machine clamps. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2006, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2006 Control : Siemens 840D - Powerline Turning diam. : 140 mm Turning length : 480 mm Mainspindle: Technology:Belt-driven spindle Speed:6.300 rpm Power (max.):10 kW Torque (max.):78 Nm C-Axis:0,001° Barcapacity:45 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axfix Gr. 65 Subspindle: Technology:Belt-driven spindle Speed:7.000 rpm Power (max.):10 kW Torque (max.):45 Nm C-Axis:0,001° Ndsdpfx As Aa Hm Eekqec Workpiececlamping:3-Jaw chuck, Röhm KFD-HS 130-3 Movement in Z:510 mm Rapid travers in Z:24 m/min Toolcarrier I (X/Z): Technology:Turret with 12 stations Taper:VDI25 Tooldrive:6.000 rpm, 7,5 kW, 12 Nm Movement in X/Z:160/510 mm Rapid travers in X/Z:20/24 m/min Toolcarrier II (X): Technology:Turret with 12 stations Taper:VDI25 Tooldrive:6.000 rpm, 7,5 kW, 12 Nm Movement in X:140 mm Rapid travers in X:20 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling pumps with Highpressure, 14 bar Raw materialfeed:Bar loader, EMCO Top Load 8-45 Finishpart removal:Part catcher with conveyor belt Extraction:Interface mechanical prepared Further Equipment:Rinsing pistol Further Accessory:Misc. used static and driven Toolholder

Condition: used, Year of construction: 1990, grinding length 600 mm grinding width 375 mm workpiece height 325 mm grinding height 325 mm table load max. 300 kg table longitudinal travel max. 650 mm table speeds 1 - 30 m/min grinding spindle speed 1440/2900 U/min grinding wheel size 300 x 50 x 76,2 mm grinding spindle drive 3,7/4,7 kW vertical feed grinding spindle max. 180 mm/min. cross travel 350 mm cross adjustment 1 - 40 mm rapid traverse cross 1200 mm/min total power requirement 9 kW weight of the machine ca. 3,3 t dimensions of machine L x W x H 2,75 x 2,10 x 2,05 m - with autom. positioning - Ndsdpfxsz N Hvae Akqec Accessories: magnetic plate 600 x 350 mm, grinding wheel with flange, wheel trueing attachment, DRO on Y- and Z-axis, 1 grinding wheel with flange separate, balancing scale, wet grinding attachemnt

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex-yard: CNC tool milling machine, Deckel Type FP 5 – 80 Year of manufacture 1995 CNC control: Dialog 12 Universal table: 750 x 520 mm Travel distances X / Y / Z: 800 / 550 / 500 mm Drive power: 9 kW Spindle quill stroke: 80 mm Electronic handwheel Spindle speeds: 32 – 5000 rpm Feed rates: 0 – 6000 mm/min Weight: 4.5 tons Price: Euro 2,500.00 (plus VAT), ex-yard. Ndods Aa Ikrjpfx Akqsc

Condition: used, total length: 5,100 mm, total width: 1,800 mm, total height: 1,950 mm, Year of manufacture: 2013 Colour: White Empty weight: 7.500 kg Price: On request - Year: 2013 - Documentation available: Yes - CE marking present: Yes - Serial number: 40032 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 445 - Swing over bed [mm]: 890 - Carriage turning diameter [mm]: 490 - Distance between centres [mm]: 3000 - Bed width [mm]: 700 - Spindle bore [mm]: 155 Nedpfxsznmlgo Akqsdc - Min. spindle speed [rpm]: 3.7 - Max. spindle speed [rpm]: 1000 - Max. workpiece weight [kg]: 5000 - Options: Three-jaw chuck, Removable bed, Fixed steady, Quick-change tool post, Digital readout - Swing over removable bed [mm]: 1060 - Type of digital readout: Fagor - Transport dimensions: 5100mm x 1800mm x 1950mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2010, operating hours: 11,658 h, travel distance X-axis: 150 mm, travel distance Z-axis: 470 mm, CNC Lathe Manufacturer: CMZ Model: TC 25 BTY Year of manufacture: 2010 Control system: FANUC Series 31i-Model A Technical details: Njdpfsz St S Tsx Akqedc X-axis: 150 mm Z-axis: 470 mm Number of tool stations: 16 positions Operating hours: approx. 11,658 h Condition: Used Technical features & accessories: - 360° C-axis - Chip conveyor - Filtration system Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to modifications, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2007, HOMAG OPTIMAT BAZ 211 Venture 21M, manufactured in 2007. CNC machining center with C-axis, Flex5, and cantilever table. Nedpfxo Ad Uyuj Akqedc Equipment: - Workpiece length 3,050 mm with all units; up to 3,225 mm when milling with a Ø25 mm tool - Workpiece width front 1,150 mm / rear 1,400 mm with all units - Z-axis travel 600 mm - Main spindle 18.5 kW S6 / 14.5 kW S1, HSK-F63, up to 24,000 rpm - 6 manually adjustable cantilevers with LED positioning aid - MPU drilling head: 20 vertical and 10 horizontal drilling spindles, as well as a pivoting nut saw S360° - Flex5 sawing/milling/drilling unit for positioned angled machining - Two-spindle lock miter unit - Tool changer 10 + 18 positions, total 28 - Retrofitted Busch-Mink vacuum pump and HYDAC coolant unit - powerControl PC85 with woodWOP Working ranges depend on the tool, unit, and clamping device. Pendulum machining depending on the configuration. Machine location: Switzerland. Inspection and sales processing by appointment only through DS-Maschinen in Stuttgart. Price on request. Detailed scope of supply, availability, inspection, loading, and transport to be agreed upon. DS-Maschinen – Owner David Schulz.

Condition: used, total height: 1,700 mm, total length: 1,400 mm, total width: 2,400 mm, Year of manufacture: 1997 Colour: Green Empty weight: 3.000 kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - Serial number: 270 - Drive system: Teach-in - Centre height [mm]: 210 - Swing over bed [mm]: 420 - Distance between centres [mm]: 900 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 4 - Max. spindle speed [rpm]: 3000 - Options: Digital readout - Type of digital readout: Weiler - Control: CNC - Transport dimensions: 1400mm x 2400mm x 1700mm (l x w x h) - Transport weight [kg]: 3000kg Financial information Ndedpfxewnh I Sj Akqec VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum