Used Cnc Hydraulic Bemder for sale (24,203)

Condition: used, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor Gedsx E Tmbspfx Abheui • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa

Condition: used, functionality: fully functional, Machine Data • Gantry system with fixed table and moving portal for minimal footprint • Base, bridge, and bridge columns made from steel, welded in one piece, stress-relieved and machined • Main machine assemblies are ribbed welded constructions, optimized for the best stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized via finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading with forklift or overhead crane • Ground precision linear guides with high preload and additional cover bands for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-sided, synchronized drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screws with double pillow block support on the Z-axis • Precision planetary gearboxes with low backlash • Fully enclosed cable drag chains protect cable harnesses from chips and dust • High-quality shielded cable drag chain wiring ensures superior protection against faults and failures • X-axis working area: 1,540 mm • Y-axis working area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 200 mm • Network connection via Ethernet • Remote maintenance via Internet FlexiCAM Control • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM • Simple operation via handheld control unit with display Spindle with Manual Tool Change • Power consumption: 2.2 kW • 5,000–24,000 rpm, steplessly programmable • Cooling by integrated electric fan Extraction System for Manual Tool Change • Hose connection diameter: 80–90 mm FlexiCAM Midrange Vacuum Table (Side Channel Blower) • T-slot profiles, individual ball valves, 6 zones • Side channel blower: 7.5 / 9 kW • Approx. 558 m³/h (50 Hz) or 654 m³/h (60 Hz) Safety Devices • CE-compliant to DIN EN 13849 • Includes EMC filter, emergency stop Gujdox E Ttbjpfx Abhoi • Light barrier system controlled by machine controller

Condition: excellent (used), Year of construction: 2015, operating hours: 3,900 h, functionality: fully functional, Controller: Doosan-Fanuc i Plus Swing over bed: 600 mm Max. turning diameter: 406 mm Max. turning length: 760 mm Chuck size: 254 mm Bar capacity: Ø 76 mm X-axis travel: 260 mm Z-axis travel: 830 mm Guodpfxs Ai T Rdj Abhsi Rapid traverse (X / Z): 30 / 30 m/min Max. spindle speed: 3,500 rpm Main spindle motor (power): 22 / 18.5 / 15 kW Max. spindle torque: 403 Nm Spindle nose: ASA A2-8 Number of tool stations: 12 stations Machine weight: approx. 5,500 kg Features, accessories: - Tailstock - Tool turret with driven tool stations (live tooling) - Chip conveyor - Coolant system - Tool setter (tool measurement) - Parts catcher The machine has barely been used and is in very good condition. Under power in Hungary. It was purchased as a new machine.

Condition: used, machine/vehicle number: 008472, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Gjdpfx Abe Akhn Iehjui Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 10 Total number of tool changer positions: 36

Condition: used, mileage: 703,037 km, power: 331 kW (450.03 HP), first registration: 05/2019, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 6,200 mm, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power assisted steering, spoiler, = Additional options and accessories = - Aluminum fuel tank - Hydraulics - Immobilizer - PTO - Roof Spoiler - Sleeping cabin = More information = Year of construction: 2019 Tyre size: 315/80 R22.5 Front axle: Steering; Suspension: parabolic suspension Rear axle: Double wheels; Suspension: air suspension Empty weight: 7.410 kg Carrying capacity: 11.590 kg GVW: 19.000 kg Number of keys: 2 Gedpo Akdzljfx Abhjui Registration number: FG696MC

Condition: excellent (used), Year of construction: 2009 Technical condition: very good Visual appearance: very good Guodsy N Tl Ejpfx Abhji = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2021, CNC MACHINING CENTER Morbidelli N100 KEY FEATURES "BUMPERS": THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS AXES Morbidelli N100 12 Morbidelli N100 15 Morbidelli N100 18 Morbidelli N100 22 Working area in X-Y-Z axis * mm 2486-1255-150 3686 TECHNICAL DATA -1555-150 3686-1860-150 22-31 = 30862185-150 22-43 = 42862185-150 Travel X-Y-Z axes mm 3120-1685-250 4320-1985-250 4320-2285-250 22-31 = 37702585-250 22-43 = 49702585-250 Traverse speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area No. 4 Vacuum pump (Opt.) m³/h 250/300 DRILLING UNIT Vertical spindles No. – RPM 7 (4X-3Y) 8000 – 12 (8X-4Y) 8000 Horizontal spindles (Opt.) No. – RPM 4 (2X-2Y) 8000 – 6 (4X-2Y) 8000 Integrated saw blade in X (Opt.) Ø mm – RPM 125 – 10000 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed RPM 24000 Lateral tool changer 8 positions 10 positions 11 positions 13 positions INSTALLATION Installed power kVA 23÷28.5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/s 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 1950 2200 2500 22-31 = 2550 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage only electrospindle or electrospindle + drilling unit: diameter 200 mm; Extraction air requirement 3,400 m³/h In conjunction with the strip for panel ejection, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC machining center for processing panel materials. Self-supporting structure and work table Box construction made of cold-rolled steel, consisting of rectangular sections welded together; multifunctional work table made of aluminum with a single working area. Holes in a grid of 120 mm for vacuum connection, easily removable via a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be machined. Moving gantry It is a gantry structure made of cold-rolled steel in a box construction, consisting of rectangular sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a quick-change tool system of type HSK63F. Travel of the gantry and aggregate carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides by means of pre-tensioned ball screws. The movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive. The movement of the aggregate carrier in the Z direction takes place via pre-tensioned ball screws. Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servo motors and digital control units. CONTROL The control unit consists of a numerical control. Guedpoz Iyvpsfx Abhei

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Gjdpfx Aexy Tmnjbhjui

Condition: good (used), Year of construction: 1996, incl. Chip conveyor incl. Chip crusher Under power incl. spare rollers Power on hours  23.000 H Working hours ca 8.000 H Rail track gauge: 1435mm Guedpsw Rc Drsfx Abhoi Max. wheel tread Ø: 1400mm Min. wheel tread Ø: 520mm Max. axle length wheel set:2450mm Min. axle length wheel set:1620mm Speeds / ranges: 154Rpm Number of slides: 2 Power: 44kW Length: 6000mm Width: 2200mm Height: 2600mm Weight: 33000kg

Condition: new, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm down holder 10 Stück no. of strokes 14 - 24 Hub/min cutting angle 0.5 - 2.0 ° throat 150 mm table height 850 mm oil volume 200 ltr. weight of the machine ca. 6.500 kg range L-W-H 2500 x 2250 x 1950 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment Guodpe Agphcefx Abhji * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" (guided-blade) design - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Driven by recirculating ball screws * Automatically retracts/swings up at maximum travel to . accommodate longer workpieces * Includes selectable "swing-away" (retraction) function * Positioning accuracy: 0.1 mm * Travel speed: approx. 80 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting to a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Movable foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Special accessories included: - Pneumatic sheet metal support device "MONOBLOCK" * For cutting thin sheet metal * Image shows a machine of similar design

Condition: used, Year of construction: 2003, turning diameter 210 mm turning length 580 mm control 840 D Siemens centre height 190 mm turning diameter over bed 330 mm turning dia. over face-slide 260 mm turning speed range - main spindle max. 4.000 min/-1 power capacity - main spindel 10 / 7,5 kW max. Torque 115 / 86 Nm spindle bore 68,5 mm max. usable bar diameter 51 mm C - Axis 0,001 ° travel -x axis 185 mm travel -z axis 455 mm number of toolpositions 12 pos. tool taper VDI 30 Driven Tool Stations: 6 pos. tailstock adjustment 400 mm intake pressure max. 4.000 N rapid traverse X: 20 / Z: 30 m/min Feed force ( X / Y / Z ) 4,5 kN total power requirement 21 kW weight of the machine ca. 3,2 t Gsdpe Ahkglofx Abhsui dimensions of the machine ca. 8,0 x 2,2 x 2,0 m CNC Turning- and Milling Center GILDEMEISTER - CTX 310 V3 - incl. 2x reduction tubes

Condition: excellent (used), Year of construction: 2011, CNC Lathe with y-axis MAZAK - QTN 250 MY MACH-ID 9483 Gjdpfx Aeyyxzmebheui Make: MAZAK Type: QTN 250 MY Control: Mazatrol Matrix Nexus Year: 2011 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2026, Ref. -No.: 10648 Manufacturer: HAITIAN Godpfx Abs Ahkx Sehsui Type: V10 Year of construction: 2026 Type of control: CNC Control: FANUC 0i-MF Storage location: Halberstadt Country of origin: China X-Travel: 1000 mm Y-Travel: 600 mm Z-Travel: 600 mm Spindle Taper: SK 40 Table Dimensions (Lengthxwidth): 1200 x 600 mm Table Load: 800 kg Max. Tool Weight: 8 kg Max. Tool Length: 300 mm Max. Tool Diameter: 80 mm Numbers Of Tools In Magazin: 24 Turning Speeds: 8000 RPM Rapid Traverse X-Axis: 36 m / min Rapid Travel Y-Axis: 36 m / min Rapid Traverse Z-Axis: 36 m / min Distance between spindle nose and table: 150 - 750 mm Machine length: 2800 mm Machine width: 3550 mm Machine Height: 2700 mm Weight Of The Machine Ca.: 6,5 t Tool-tool change time: 2,5 sec Feed rate X-axis: 15 m / min Feed rate Y-axis: 15 m / min Z-axis feed rate: 15 m / min Positioning accuracy: 0,008 / 0,006 / 0,006 X/Y/Z Repeatability: 0,005 / 0,004 / 0,004 X/Y/Z T-slot in the table: 5 x 18 x 100 mm Further information: - Documentation / Manual - Steplessly adjustable spindle speed - Chip conveyor - Drive type: Belt drive - Pull stud: MAS P40T-I (45°) - Power supply: 30 kVA - Pneumatic and hydraulic lubrication system - Coolant system - Internal coolant tank with chip conveyor - Full enclosure - Air gun - 3-color signal tower light - Standard accessories - Chip trolley This is a brand-new machine available at short notice, with a wide range of customization options to meet individual customer requirements. Various control systems, including FANUC, HEIDENHAIN, and Siemens, as well as different spindle configurations and a wide range of additional equipment options, are available. This allows the machine to be tailored to specific production requirements and machining applications.

Condition: good (used), Year of construction: 2006, Ref. -No.: 10651 Manufacturer: CHIRON Type: Mill 2000 Guodpfxo Ahkyae Abhji Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Country of origin: Germany Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Weight Of The Machine Ca.: 9,6 t Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Tool Interface: SK40 Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Equipment: Screw chip conveyor with discharge to the left side Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power.

Condition: good (used), Year of construction: 1998, Ref. -No.: 10661 Manufacturer: MAZAK Type: SQT 200 MS Year of construction: 1998 Type of control: CNC Control: Mazatrol Fusion 640T Storage location: Halberstadt Country of origin: Japan Turning Speeds: 6000 RPM Swing Dia.: 525 mm Turning Diameter: 300 mm Turning Length: 500 mm Spindle Speeds: 5000 RPM Spindle Bore: 51 mm Spindle power: 18,5 kW Turret places: 1 Pcs Tool places: 12 Machine length: 3023 mm Machine width: 1700 mm Machine Height: 1999 mm Weight Of The Machine Ca.: 5,3 t Pole work up to max.: 51 mm Guodpfxe Ahkyls Abhsi Further information: - The Mazak SQT 200 MS is built for durability and reliability - Its design ensures stability and precision during machining, even at high speeds or during long production runs. - This model features powered tools and C-axis capabilities - This model is typically equipped with the Mazatrol Fusion 640T CNC control. The machine can be viewed while powered on by appointment.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10666 Manufacturer: GLEASON - PFAUTER Godpfx Abj Ahkytohjui Type: P 1600 / 2000 S Year of construction: 2008 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine length: 6900 mm Machine width: 8400 mm Machine Height: 3700 mm Max. Wheel Diameter: 2000 mm Gear Width: 700 mm Weight Of The Machine Ca.: 35 t Further information: The machine is currently in active production and can be inspected under power and in operation by prior arrangement

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm Gujdpfxsya Iaqs Abhei - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC-Steuerung Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Table Dimensions (Lengthxwidth): 1600 x 1250 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Guodpfx Abo Ahkwuehei Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 ° Further information: Includes angle head 0,001° The machine can be viewed under power.

Condition: good (used), mileage: 580,659 km, power: 412 kW (560.16 HP), first registration: 01/2016, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 3,950 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,750 mm, total width: 2,550 mm, total height: 3,980 mm, Equipment: ABS, air conditioning, cruise control, parking heater, retarder, tachograph, traction control, = Additional Options and Accessories = - Digital tachograph - Fixed - Halogen lamp - Hydraulic system - Manual - Auxiliary drive - Pump - Radio/cassette - Reversing camera - Sleeper cab - Seat cover - Auxiliary braking system = Notes = Number of axles: 3, Configuration: 6x2, Tare weight: 9233 kg, Gross vehicle weight: 26500 kg, Total tank capacity: 410 liters, Height of fifth wheel coupling: 127 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling force: 398 tons, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Radio/cassette, Color: Blue, Reversing camera, Type of lighting: Halogen lamp, Flashing lights, Engine power: 412 kW (553 hp), Engine displacement: 15256 cc, Fuel: Diesel, Euro standard: 6, Type of transmission: AS-Tronic, Transmission type: ZF, Gears: 12, Auxiliary braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Pump, Seat arrangement: 1+1, Seat cover: Seat cover, Seat adjustment: Manual, 6x2/4 560 hp Retarder, Tipper, Hydraulic, Air conditioning, 78T! = Further Information = Transmission Gearbox: ZF, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 5 mm; Tire tread depth right: 6 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 385/65R22.5; Lift axle; Steerable; Tire tread depth left: 1 mm; Tire tread depth right: 6 mm; Suspension: Air suspension Axle 3: Tire size: 315/80R22.5; Twin tires; Tire tread depth left inner: 17 mm; Tire tread depth left outer: 18 mm; Tire tread depth right inner: 17 mm; Tire tread depth right outer: 18 mm; Suspension: Air suspension Weights Unladen weight: 9,233 kg Payload: 17,267 kg GVW: 26,500 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality Guodpfx Ao Ahnuysbhsi • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry through our website. Inquire directly about our European warranty package.

Condition: good (used), mileage: 428,734 km, power: 368 kW (500.34 HP), first registration: 01/2018, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 14, emission class: euro6, suspension: air, total length: 5,930 mm, total width: 2,550 mm, total height: 3,920 mm, Equipment: ABS, air conditioning, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, tachograph, traction control, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Fixed - Halogen lamp - High roof - Hydraulic system - Manual - Auxiliary drive - Pump - Radio/cassette - Lane keeping assist - Fabric - Auxiliary braking system = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8203 kg, Gross vehicle weight: 19000 kg, Total tank capacity: 500 liters, Saddle coupling height: 120 cm, Saddle coupling: Fixed, Number of locks: 1, Winch pulling capacity: 392 tons, Suspension type: Air suspension, Type of cabin: High roof, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary air conditioning, Auxiliary heating, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Air conditioning, Flashing lights, Engine power: 368 kW (493 Hp), Number of cylinders: 6, Displacement: 12419 cc, Fuel: Diesel, Euro: 6, Transmission type: Automatic, Transmission type: Scania, Gears: 14, Auxiliary braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Pump, Seat arrangement: 1+1, Seat covering: Fabric, Seat adjustment: Manual, XLX, Hydraulic unit, auxiliary air conditioning = Additional Information = Transmission Transmission: SCA, 14 gears, Automatic Axle Configuration Tire size: 315/80R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steered; Tire tread depth left: 11 mm; Tire tread depth right: 10 mm Axle 2: Double tires; Tire tread depth left inner: 9 mm; Tire tread depth left outer: 11 mm; Tire tread depth right inner: 4 mm; Tire tread depth right outer: 9 mm Weights Unladen weight: 8,203 kg Payload: 10,797 kg GVW: 19,000 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing inventory • Recognizable quality • A good price Gusdpfx Abe Agudushei • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Inquire directly about our European warranty package.

Condition: used, x-travel 2500 mm y-travel 2000 mm z-travel 1600 mm w-travel 800 mm control Siemens 840 D boring spindle diameter 150 mm bore spindle turning speed range 4-1500 U/min Feeds, stepless (Y, Z) 1-9999 mm/min Rapid Feed Y, Z, W 10000 mm/min Boring spindle taper ISO 50 Milling spindle taper ISO 60 surface area 1600 x 2000 mm workpiece weight max. 12500 kg total connected load 90 kW weight of the machine ca. 32200 kg Gujdpfx Aozv Ulkobhei

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz Gujdpfx Abohik Ezshei - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Year of construction: 2010 Type of control: CNC-Steuerung Control: Siemens SINUMERIK 840 D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm T-Slots: DIN 650 mm Tool Taper: HSK - A 100 Tool Piece Magazine With: 207 + 10 Pcs./pcs. Godpfx Asy Ed Ehebhjui Max. Torque: 1250 Nm Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 - NC rotary table B-axis

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Godpfx Ajzc D Aajbhoui Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Guedpj Ahkw Hjfx Abhei Type of control: CNC-Steuerung Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.