Used Cnc Machining Center for sale (69,018)

Condition: ready for operation (used), Year of construction: 2001, A Chiron CNC vertical machining center is available. Travel X/Y/Z: 2000mm/520mm/630mm, table dimensions X/Y: 2600mm/570mm, max. table load: 1000kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 4500mm/3250mm/3600mm, weight: approx. 11400kg, control system: Heidenhain TNC 426/430M, operating hours: approx. 50682h. Including coolant system, chip conveyor, filtration system and paper band filtration system. Documentation available. An on-site inspection is possible. Hjdszcyp Njpfx Aafonn

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WEINIG Unicontrol UC 10-5 Window Production Machine Hnedexmr N Ijpfx Aafsn 1. Electronically controlled crosscut saw with laser switching between saw cutting and zero-point wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for tools 6 x 80 mm, 15 kW motor 3. Longitudinal/synchronous profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 4. Grooving spindle (between 1st and 2nd lifting spindle), D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and grooving spindle on the right side, 3 kW motor Hardware spindle 40 x 150 mm, 3 kW motor Adjustable feed speed 6-12 m/min, 1.1 kW motor 4-position counter changer Electronic length stop, 3600 mm Workpiece return system with automatic rotating mechanism Automation package Interval-controlled sash support Double parts package Laminated fabric tables (for sanded surfaces) Pressure guide on the left, max. wood width difference 100 mm Machine in very good technical and visual condition

Condition: used, Year of construction: 2013, Machine design: Throughfeed Hnsdpfsx Urniox Aafon Processing size in X direction: 1000 mm Processing size in Y direction: unlimited mm Processing thickness (Z dimension): 60 mm Number of main spindles: 1 unit Main spindle power: 3.3 kW Tool changer: No tool changer Rear wall groove units: fixed in Y direction Vertical drilling spindles - in X direction: 5 units Vertical drilling spindles - in Y direction: 5 units Spindle speed, vertical drilling spindle: 4000 rpm Horizontal drilling spindle in X direction: 2 double spindles Horizontal drilling spindle in Y direction: 1 double spindle Spindle speed, horizontal drilling spindle: 4000 rpm Monitor size: 17" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: Masterwork DXF interface: Yes Online connectivity possible: Yes CD-ROM drive: Yes Table version: fixed table with rollers Weight approx.: 1300 kg Dimensions: 2,200 x 2,470 x 1,590 mm Location: Customer site

Condition: used, Year of construction: 2023, New demonstration machine! List price: €86,567 net Base machine complete in standard configuration for drilling and grooving: For detailed technical data, please refer to the ProTec Type 0571 data sheet. Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed modemax. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holders HSK63F with collet chuck 462E/OZ25, cutter length up to 130 mm. Information: Machining unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw and optional Profit milling unit. Connected load 12 kVA Rated current 17.5 A Fuse 32 A Voltage 400 V, 50 Hz, 3 Ph (without transformer) Network TN or TT Pneumatic connection 7 bar (102 psi). At the machine: coupling plug (quick coupling) ¼, DN7.2, brass, factory-supplied. For the machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side. Supply line, inner hose diameter 12 mm (min.). Compressed air consumption continuous operating air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air). Extraction connection 3x extraction outlets dia. 80 mm. Extraction air velocity 30 m/sec - measured at the extraction outlet. Extraction requirement min. approx. 2500 m3/h. Machine weight approx. 1650 kg (with options!). Machine installation area: In general, a ProTec fix can be bolted to the floor. A concrete floor (or foundation) is required (at least at the four machine corners/feet). Equipment: Protec 571 Profit HSK63F with 3-position magazine. Roller table 765 mm (Y-axis), foldable, for machine front, width 500 mm. Roller table 765 mm (Y-axis), foldable, for machine rear, width 500 mm. Auxiliary stop 600 mm with integrated rollers for roller tables. Additional safety device with lamella curtain. Prerequisite for horizontal routing for Lamello P-System (without Lamello P-System tools). Drill bit set for Protec shank ø 10 mm with clamping surface (JSO) 1 HW-roof tip drill bit 5x70mm (NL 35mm), LH # 30566-5-05035-L 3 HW-dowel drill bits 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW-dowel drill bits 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW-dowel drill bits 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW-dowel drill bits 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW-dowel drill bits 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW-cup drill bit 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW-cup drill bit 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW-cup drill bit 35x70mm (NL 35mm), RH #30300-5-35070-R 1 HW-grooving cutter ø 125/30 mm groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and subject to agreement Tool holder HSK63 F 3.00 pcs For collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm 3.00 pcs Indexable insert shank cutter Z1+1 1.00 pc HW with indexable insert drill tip ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW indexable inserts Z1 1.00 pc with indexable insert drill tip, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separat Hedpfx Aajw Tfzfsfenn

Condition: used, Year of construction: 2019, Machine design: Throughfeed/Return feed Working area in X-direction: 1300 mm Working area in Y-direction: 5600 mm Working thickness (Z-dimension): 60 mm Number of main spindles: 1 Main spindle power: 5.5 kW Main spindle speed: 1000-20,000 rpm Clamping system: HSK-63 F Hsdpfjymp N Tjx Aafonn Tool changer: Pick-up changer Tool change stations: 3 Back wall grooving units: fixed in Y-direction Vertical drilling spindles - in X-direction: 3 Vertical drilling spindles - in Y-direction: 10 Horizontal drilling spindle in X-direction: 2 Horizontal drilling spindle in Y-direction: 6 Control system: PC control Operating system: Windows Typewriter keyboard: Yes Mouse: Yes Programming system: Gannomat Editor DXF interface: Yes Online connection possible: Yes Table design: fixed, smooth table Central lubrication: automatic Tools: various tools Operating hours: 920 hours Weight approx.: 1800 kg Extraction diameter: 3x80 mm Machine was modernized in the factory; pressure bar and control technology from model 0572! Storage location: Customer

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: CE marking, documentation/manual, CNC NESTING SCM PRATIX S22-31B with AUTOMATIC UNLOADING TECHNICAL FEATURES • Moving gantry, with Bumper safety system • 3 controlled axes: X, Y, and Z • Travel speed on the axes: X: 35 m/min Y: 35 m/min Z: 15 m/min • Usable working area in X: 3,086 mm • Usable working area in Y: 2,155 mm • Usable working area in Z: 150 mm • PRO-SPACE safety system. With this system, the machine does not require perimeter guards or safety mats; the operator has free access to the work area from any side. • MATRIX aluminum table, 2,220 mm x 3,150 mm • 16 retractable pneumatic stops on the table (6+6 in Y and 4+4 in X) • 8 MPS 130x130 mm suction cups, H=25 mm • 4 MPS 150x50 mm suction cups, H=25 mm • SCM TECPAD remote control with digital display, with its corresponding resting base • Lubrication of the guides by means of a centralized drive pump Hnedpfx Ajzav Hxeafsn • 2 vacuum pumps of 250 m3/h each, located under the machine structure • Xilog-Plus control software • Maestro Nesting software. Rectangular nesting • DXF file import • Pusher for evacuating finished parts, with vacuum cleaning system • Motorized belt table for material unloading, with photocells to read parts at the end. 3,200 mm x 2,180 mm • CE COMPLIANCE • Machine in excellent condition. Year of manufacture: 2014 • Supplied with the instruction manual, machine exploded view diagram, and electrical diagram. OPERATIONAL GROUPS: ROUTER • Electro-spindle power: 6.6 kW / 9 HP. 0 - 24,000 rpm • Air blowers • Mount that allows for the attachment of a horizontal tool • Linear tool changer, TR13 model, with 13 positions • ATC for HSK F63 tool holders • Calibration sensor to automatically measure tool length MULTIPLE DRILLING UNIT • 7 vertical drill holders • 1+1 horizontal drill holders in the X direction • 1+1 horizontal drill holders in the Y direction • 1 vertical disc in the X direction

Condition: good (used), Year of construction: 2012, 5-axis CNC machining center Manufacturer: AXA Machine model: VPC-2800U Control system: Siemens Year of manufacture: 2012 Technical data Working area - X-axis travel (mm) 3,900 - Y-axis travel (mm) 2,940 - Z-axis travel (mm) 1,100 CNC rotary table - Clamping surface (mm) ø 2,800 Feed drive - Max. rapid traverse rate in X/Y/Z (m/min) 30/30/25 Main spindle - Standard drive No. 140 Spindle speed range (rpm) 30-7500 Spindle power max. continuous duty 100% (kW) 63 Spindle torque max. continuous duty 100% (Nm) 191 Tool holder: SK50 Swiveling head Hnedpey Txt Nofx Aafjn - Swiveling range B-axis (degrees) 90 - Indexing: freely interpolating Tool changer - Number of tool positions: 60 Please note: The machine is NOT equipped with a rotary function. Subject to changes and errors in the technical data and specifications.

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 Hjdpjy Txrxjfx Aafenn - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: used, Year of construction: 2014, operating hours: 30,663 h, machine/vehicle number: 87391, Control system: HEIDENHAIN TNC530, travel range X/Y/Z: 2x 750x500x600 mm, swiveling table, tool holder: SK40, 22 tool positions, chip conveyor: AXA FSB 300/TLG:38,1, serial number: 171153-1, 87391, year of manufacture: 2014. Hodpey T Nygjfx Aafonn

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Technical Information for Mazak Corporation Mazak VTC-300C II: Model: Mazak VTC-300C II Machine type: Vertical CNC Machining Center Year of manufacture: 2003 Serial number: 162107 Accessories: Chip conveyor included Connected load: 28 kW Typical technical data for the Mazak VTC-300C II: Control: Mazatrol Fusion 640M / Mazatrol PC Fusion CNC Travel distances: X-axis: approx. 1,740 mm, Y-axis: approx. 760 mm, Z-axis: approx. 660 mm Table size: approx. 2,000 × 760 mm Table load capacity: up to approx. 1,400–1,500 kg Spindle taper: CAT 40 / BT40 Spindle speed: typically 10,000 rpm Main spindle power: approx. 18.5–22 kW Hodpfx Aajy St E Rjfonn Tool changer: 30 positions Rapid traverse: approx. 36 m/min Coolant system: included Machine weight: approx. 11,000–13,000 kg The machine is part of Mazak’s large VTC series and is particularly suited for: Large aluminum parts Steel machining Automotive production Fixture and series manufacturing

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, Technical data: TABLE Table surface 700 x 350 mm Table height from floor 835 mm T-slots 16 mm x 63.5 mm / 4 pcs. Workpiece weight max. 350 kg Travel ranges: X 610 mm Y 355 mm Z 460 mm Distance from spindle center to column surface 415 mm Distance from spindle nose / table min. 70 mm / max. 530 mm SPINDLE Spindle mounting SK 40 / DIN 69871 (draw bolt: DIN 69872) Spindle speeds, stepless 10000 rpm Spindle drive motor Siemens: 7.5 / 11.0 kW AXIS FEED, digital feed motors, direct drives All 3 feed motors are directly flange-mounted. Drive without timing belt! Manufacturer of ball screws: HiWiN X-axis Feed motor: Siemens Ball screw: Ø 32 x 10; C 5 Y-axis Hedpfx Aezcazxsafsnn Feed motor: Siemens Ball screw: Ø 32 x 10; C 5 Z-axis Feed motor: Siemens Ball screw: Ø 32 x 10; C 5 FEED RATES: Rapid traverse: 20 m/min for X and Y-axis, 18 m/min for Z-axis Feeds: X - Y: 1-10 m/min. ACCURACY Positioning: (within 300 mm) +/- 0.005 mm Repeatability: +/- 0.004 mm TOOL CHANGER Tool mounting: DIN 69871 with draw bolt DIN 69872 Changer system standard: disc changer without arm Capacity: 10 tools Change time: approx. 20 seconds max. Max. tool weight: 7.0 kg Largest tool diameter: 93 (120) mm Max. tool length: 300 mm AIR SUPPLY Required pressure: 6.5 bar Air consumption: 300 l / min. Standard accessories: - CNC control SIEMENS 828 D with "SHOPMILL" user interface - Large selection of milling and drilling cycles - Machining cycle for contour pockets / contour ribs with islands, etc. - Graphic functions - Tool management - User CF card on the control panel front - RS 232 C interface - USB interface on the control panel front - RCS-Commander: front ETHERNET interface for notebook PC - 100 Mbit/sec. TCP / iP ETHERNET interface for connection to a company network - Portable electronic handwheel - Tapping without compensation chuck (Rigid Tapping) - Spindle orientation - Color screen (LCD) 10.4" - Manual in all 3 axes - Semi-automatic with manual feed operation - Automatic with cycle function, CNC operation without CNC knowledge - ISO programming - Linking of cycle programs and ISO programs - Large memory for created programs - Full enclosure (CE) - Heat exchanger for the control cabinet - Automatic tool clamping - Automatic tool changer with 10 tools - Spindle air blow-out - Coolant system incl. oil separator - Automatic central lubrication - Work light - Electronic handwheel for all 3 axes - CE conformity, EMC filter - 24 months full warranty Siemens "RSV" - Two-tone paint: white RAL 7035, black RAL 7021 - Increase in spindle speed to 10000 rpm - Chip conveyor in hinge chain design - Coolant supply through the milling spindle (internal cooling) with 20 bar high-pressure pump = 55 l/min., separate tank - Automatic tool changer without arm with 16 tools - Preparation for 4th axis

Condition: used, Year of construction: 2021, operating hours: 7,246 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rotational speed (min.): 10,000 rpm, spindle speed (min.): 20 rpm, Equipment: chip conveyor, CNC machining center, used Manufacturer: DMG MORI Type: M1 - Plus Year of manufacture: 2021 Purchase / Acceptance: May 26, 2022, as a demonstration machine Operating hours: Spindle: 4,049 h Total: 7,246 h Control system: Siemens Sinumerik 828D + Job Shop Working area: X-axis travel: 550 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Hnodpfezbvqgsx Aafjn Spindle: Speed: 20 - 10,000 rpm Power: 13/9 kW Mount: SK 40 DIN 69871 Tool changer: 24-position Equipment: - Renishaw 3D probe - Renishaw tool probe - Chip conveyor, left side - Coolant gun

Condition: good (used), Year of construction: 1997, functionality: fully functional, input current: 50 A, number of axes: 3, number of slots in tool magazine: 12, total length: 5,000 mm, total width: 2,900 mm, overall weight: 4,500 kg, Equipment: CE marking, documentation/manual, CNC milling machine with a tool magazine for 12 tools, featuring a vacuum clamping system to secure the workpiece, and includes a vacuum pump. Hnjdpfxoza U Nxe Aafjn

Condition: used, Year of construction: 2011, X-Y working area: 4,422 x 1,753 mm X-Y travel: 4,955 x 1,918 mm Z-axis travel: Z = 400 mm 5-axis MORBIDELLI milling spindle C-axis rotation: 650° B-axis tilt: 290° (-10°) Power: 11 kW at 20,000 rpm, adjustable via inverter Liquid cooling HSK 63F interface Chip conveyor Automatic CNC central lubrication RAPID 24 tool changer (24 tool positions) Drill head extension with 30 + 6 spindles 8 positioning aids 2 cross lasers Vacuum pump 250 m³/h PC control with Windows Office Weight approx. 5,000 kg Storage location: Customer Hsdey D Rv Depfx Aafenn

Condition: new, Year of construction: 2026, VIDEO available upon request – Affordable four-axis profile machining center (X, Y, Z + I – rotary axis for the table) for the automatic 3-sided machining of profiles made of aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new. CNC control system based on Windows® with 3D color graphics and simultaneous machining. Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optional 8 kW) Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speeds: 120 to 24,000 rpm Hjdszcnztopfx Aafsnn Space requirement, including mobile control panel and rear safety fence: approximately 5.5 m x 3.1 m x H 2 m Weight: approximately 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear work area protection by safety fence with access door - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous machining

Condition: excellent (used), Year of construction: 2016, CNC FANUC 0i - TC Axes X, Y, Z: 1630, 762, 650 Rapid traverse X – 30, Y – 30, Z -24 m/min Table size 1630 x 760 Usable table load of 1300 kg Hnjdpfx Aaeqzhfxjfsn Spindle cone SK40 Spindle speed 12,000 rpm Tool magazine 30 Chip tank Linear guides in all axes (roller guided) Coolant nozzles on the spindle nose Electronic handwheel (transportable) for 3 axes 3 colors signal light Accesories Coolant system with pumps, spindle cooler, handwheel, transformer & 1x set of documentation

Condition: excellent (used), Year of construction: 2016, Siemens 840 SL control, twin spindle, 20,000 rpm, HSK 63, 2 x 32 tool positions, internal coolant supply at 30 bar, X 550 mm, Y 400 mm, Z 400 mm, direct measuring system, workpiece changer, laser control, Knoll coolant system, fixture flushing system, central lubrication system, automatic loading doors, year of manufacture 2016. Hnsdpozb D Rnofx Aafjn

Condition: used, Year of construction: 2014, Working dimensions: X = 3425 mm, Y = 1287 mm, Z = 325 mm. Max. workpiece height: 180 mm. Max. clearance under the hood: Y = 1450 mm / Bumper version = 1370 mm. Includes CabinetControl Base, 1 machine license, and 1 office license. Milling head 7830, 1-stage, power 6.5 kW, air-cooled, n(max.) 1000 - 18000 min-1, infinitely adjustable. Max. power at 12000 min-1 to 18000 min-1 with HSK-F 63 tool holder, with collet chuck with HSK shank. Drilling unit 7884, 14 spindles, 10 vertical spindles individually accessible, arranged in an L-shape, 6 in the X direction and 4 in the Y direction. Drive power 3 kW, 32 mm pitch. Sawing unit: Integrated sawing unit for sawing/grooving in the X direction, n(max.) 1000 - 5650 min-1, infinitely adjustable. Tool holder: A = max. DM = 125 mm. Location: Supplier. Hedpfxjy Tpz Ro Aafsnn

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons Hnedpfsutuyijx Aafon good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Hnsdotrhq Hepfx Aafjn Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Hjdpfx Aow Nklhsafsnn Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, Year of construction: 2003, CNC machining center, universal Manufacturer: AXA Type: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Hnodowwt Nmspfx Aafjn Travel distances: X/Y/Z = 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60-position Spindle speed: 10,000 rpm Weight: approx. 20 tons 3626ä

Condition: used, Year of construction: 2012, CNC machining center Hedpswv Tm Nofx Aafonn Manufacturer: Unverzagt Type: UVA 550 Plus Year of manufacture: 2012 Control system: Siemens 828D Operating hours: approx. 3,000 Travel ranges: X/Y/Z: 600 x 400 x 500 mm Tool positions: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Hexagon measuring probe Chip conveyor Spindle cooler IKZ (internal cooling system) 3626ä

Condition: excellent (used), Year of construction: 2011, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 5921, type of input current: three-phase, input voltage: 2,800 V, pressure: 6 bar, input current: 41 A, feed length X-axis: 4,300 mm, feed length Y-axis: 2,300 mm, feed length Z-axis: 1,200 mm, total height: 4,310 mm, total length: 7,310 mm, total width: 7,130 mm, input frequency: 50 Hz, We offer this excellent 5-axis CNC machining center, the CMS SINTESY 4323 MPT, designed for trimming plastic and laminate parts, manufactured in 2011. Manufacturer: CMS S.p.A. Model: SINTESY 4323 MPT Year of manufacture: 2011 5 interpolated axes Linear axes: X-4300, Y-2300, Z-1200 Rotary axes: B +/- 120 deg, C +/- 240 deg Electrospindle: 7.5 kW Installed power: 28 kW Compressed air consumption: 400 nl/min Hodpfxjzcpkco Aafjnn Tool magazine: 12 positions Extendable tables Dustproof cabin – enclosed machine design. If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,850 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 9,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 650 CNC machining center - Important note: the spindle was replaced in 2025 for approximately EUR 40,000, therefore, very few spindle hours! - Pallet dimensions: approx. 320 x 320 mm - The pallets are clamped onto the rotary table. - Tool holder: HSK-E 40 - For further technical data, see the images. - Includes technical documentation. - Includes HSK-E 40 tool holders and three pallets. Hsdpfx Aajy Tvcusfonn Attention: The item must be collected between July 21st and July 23rd, 2026, on a date to be agreed upon. FCA D-80339 Munich - loaded onto a truck.