Used Cnc Vertical Turning Lathe for sale (20,720)

Condition: excellent (used), Year of construction: 2019, operating hours: 5,045 h, functionality: fully functional, machine/vehicle number: 3116946, turning diameter over cross slide: 279 mm, turning length: 406 mm, turning diameter: 279 mm, spindle bore: 64 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 406 mm, spindle motor power: 15 W, rotational speed (min.): 4,000 rpm, rotational speed (max.): 6,000 rpm, total height: 2,167 mm, total length: 3,395 mm, total width: 1,612 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 30 m/min, workpiece weight (max.): 3,583 kg, type of input current: three-phase, overall weight: 3,583 kg, spindle nose: -, Equipment: documentation/manual, Used turning center for sale – CNC lathe with Y-axis and driven tools, in very good condition. Contact us for further details. Model: HAAS ST-15Y Year of manufacture: 2019 Maximum turning diameter: 305 mm Maximum turning length: 406 mm Y-axis travel: 102 mm Bar capacity: 64 mm Chuck size: 8 inches Maximum spindle speed: 4000 rpm Number of controlled axes: 4 Spindle motor power: 14.9 kW Tool size: BOT 6/12 VDI40 Controls: HAAS 2019 Voltage: 440V AC Weight: 3583 kg Dimensions (L x W x H): Iiedpfezr E H Dex An Njf 3030 x 1550 x 1810 mm Additional Equipment: VPS Programming System, Hydraulic Tailstock, HAAS Auto-door, Chip conveyor, 6000 rpm Live Tools Resale capability included. The center is in very good condition. It is currently in continuous operation and connected to power. The machine operated in one shift.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Z-axis: 300 mm, chuck outer diameter: 250 mm, spindle bore: 79 mm, number of slots in tool magazine: 12, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 800 mm Travel in Z-axis: 300 mm Chuck diameter: 250 mm Spindle head: 170 h5 Spindle diameter at the front bearing: 120 mm Spindle bore: 79 mm Isdpfx Anozpxf Uo Noif Number of tool stations: 12 EQUIPMENT C-axis

Condition: used, Year of construction: 2007, operating hours: 9,546 h, functionality: fully functional, machine/vehicle number: R2EVO401, turning diameter over cross slide: 210 mm, turning length: 500 mm, turning diameter: 210 mm, spindle bore: 45 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, overall weight: 2,600 kg, Equipment: documentation/manual, EMCO 45 E45 with bar feeder EMCO Compact Load Iisdezlihlspfx An Nef The machine is in good condition and fully functional and can be inspected at the seller’s premises until August 28, 2026. The loading date is scheduled for September 3, 2026; if loading takes place later, the loading costs will be borne by the buyer. Sale due to replacement investment in a new CNC lathe. Control system: Siemens 810D Turning length with chuck: 500 mm Max. turning diameter between centers: 210 mm Bar diameter: 45 mm Rapid traverse rates: 24/20 m/min Headstock: DIN 55026/KK5 12-station tool turret VDI-30 6 powered stations C-axis Tailstock with hydraulic quill, MK-4 Power chuck: Röhm KFD-HE 170/3 Removal and loading of the machine will be carried out by Hametec; the loading date is September 3, 2026. The transport costs will be borne by the buyer.

Condition: like new (used), Year of construction: 2026, TECHNICAL DATA: Turning diameter 2000 mm Max. workpiece height 1200 mm Max. workpiece weight 8000 kg Faceplate diameter 1800 mm Faceplate speed range / 4 automatic stages 0-210 rpm Max. faceplate torque 31500 Nm Main drive power 55 kW EQUIPMENT: - 4-position turret or tailstock with 2 Capto clamping units - Central lubrication system SKF/VOGEL - Commissioning including training - 12 months warranty - Complete electrical equipment 230/400 V, 50 Hz, Made in Germany, CE standard Iedpfsf S Hcysx An Neif OPTIONS: - Steel chucks - Tool changing system (10 positions) - Machine enclosure - Chip conveyor - Coolant preparation - Side support - Machine version with tailstock and 2x Capto C6 - ... CONTROL: CNC cycle control Fagor 8037TC/8055TC* or Siemens OTHER: CE Declaration of Conformity Geometrical acceptance test according to DIN 8609-2

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,267 h, functionality: fully functional, turning length: 180 mm, turning diameter: 100 mm, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, TECHNICAL DETAILS Turning diameter: 190 mm Turning length: 180 mm Iisdszul T Nspfx An Nef Max. turning diameter: 100 mm Travel X-axis: 125 mm Travel Z-axis: 195 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Spindle bore: 43 mm Spindle bearing diameter: 80 mm Spindle speed range: 60–6,000 rpm Tailstock diameter: 40 mm Tailstock taper: MK 3 Tailstock travel: 45 mm Number of tool positions: 10 MACHINE DETAILS Transformer: 400 V / 200 V Data interface: V.24 / RS-232-C Operating hours: 27,267 h EQUIPMENT Bar feeder Integrated CNC control Space-saving, compact design Inductively hardened flat guideways for bed and carriage Continuously variable AC main spindle drive Constant cutting speed programming Integrated cold light Ammeter for main spindle drive Swiveling central control panel Controls for automatic, manual, and CNC programming modes Three-phase servo motors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and spray nozzle Electric 10-position turret system, MORI SEIKI Automatic turret indexing logic Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Front sliding door with large viewing window Electrical connection for chip conveyor, prepared Electrical equipment according to VDE 0113 Attached control cabinet Freestanding transformer

Condition: good (used), Year of construction: 2005, TECHNICAL SPECIFICATIONS OF THE MACHINE WORKING DIMENSIONS Iijdpfxjyyc Ano An Njf Table diameter: 1,300 mm Maximum turning diameter: 1,500 mm Minimum internal turning diameter with boring bar: 450 mm Maximum turning height: 1,700 mm Vertical travel of the ram: 1,000 mm Vertical travel of the crossrail: 1,400 mm Height from faceplate to floor: 970 - 5 mm Number of tool turrets: - 700 mm Tool holder shank section: 40 x 40 mm Ram tool holder section: Square 280 - 300 Machine weight: 27,000 - 30,000 kg Tool model: TOOL CAPTO & ISO50 GENERAL DATA CNC control: SIEMENS 840DD Number of columns: 1 Total machine length (depth) approx.: 4,500 mm Machine width approx.: 5,600 mm Machine height approx.: 6,350 mm Number of T-slots for flange clamping: as per ROHM faceplate T-slots: as per ROHM faceplate Number of slots for jaw mounting: 4 Maximum admissible table load: 5,000 kg Maximum table torque: 2,165 kgm Maximum cutting force: 4,500 kg FEED RATES - WORKING FEED "X" axis slide: 0.1 - 3,000 mm/min "Z" axis ram: 0.1 - 3,000 mm/min Crossrail bridge: 6 / 600 mm/min "C" axis table (milling): 0 - 3 rpm "C" axis table (turning): 0 - 400 rpm - RAPID TRAVERSE "X" axis slide: 7,500 mm/min "Z" axis ram: 5,000 mm/min Crossrail bridge: 600 mm/min

Condition: excellent (used), Year of construction: 2020, operating hours: 2,139 h, functionality: fully functional, machine/vehicle number: NL257200651, turning length: 700 mm, turning diameter: 366 mm, spindle motor power: 19 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 5,800 kg, We are offering this very well-maintained and low-hour DMG MORI NLX 2500/700 CNC turning and milling center, year of manufacture 2020. Manufacturer: DMG MORI Model: NLX 2500/700 Year: 2020 Condition: Excellent Category ID: 1128 Type ID: 2239 Type: CNC Turning and Milling Center Machine hours: 7,598 h Program runtime: 2,139 h Details: Base machine: NLX 2500/700 with driven tools and C-axis Universal lathe with 3 axes Iiodpfx Ansyxglke Nsf Turning length: 700 mm Main spindle with integrated motor spindle ISM 80 (bar capacity in mm) AC motor with 15 / 18.5 / 18.5 kW power (100% / 50% / 25% duty cycle) 4,000 rpm Hydraulic clamping system (see clamping cylinder/chuck) C-axis with hydraulic spindle brake 10-station BMT turret 10-station driven tool turret NC tailstock CELOS® with Mitsubishi control M730UM Control: Mitsubishi M730UM controller with CELOS CELOS - ERGOline Touch Spindle: Main spindle (Spindle 1) standard Spindle options: Oil blower cooler for circulating coolant oil Chuck for main spindle: Main spindle (Spindle 1) 10" hollow chuck Ø254 mm Main spindle (Spindle 1) hollow clamping cylinder for 10" chuck Ø254 mm BB210A821 Chuck options: Double foot switch with protective cover Tool turret: Rotating tools with 40/14 Nm, 10,000 rpm 12-station BMT60 turret for MC configuration Overhang for driven tools 100 mm (limited Y-axis travel) Tailstock: NC tailstock taper for live center MK 5 (live center not included) Coolant / Chip removal: Use of water-soluble coolant (emulsion) Hinged belt chip conveyor, discharge right (500,700) Coolant system with increased pressure, 5 bar I/F for oil mist separator (extraction opening Ø 150 mm + electrical components) (AFS 1100) AFS 1100 oil mist separator Measuring / Monitoring: Manual tool presetter (swiveling, standard) Additional options: Customer voltage: 380 V Frequency: 50 Hz Metric setting SCHNEIDER transformer 45 kVA Technology cycles: Alternating spindle speed Control options: X-axis direction ISO Last maintenance: April 2024

Condition: excellent (used), functionality: fully functional, workpiece weight (max.): 12,000 kg, spindle motor power: 55,000 W, chuck outer diameter: 2,000 mm, total length: 5,600 mm, total height: 6,000 mm, total width: 6,000 mm, turning height: 1,300 mm, mount diameter: 2,050 mm, overall weight: 31,000 kg, Turning diameter: 2050 mm Isdjznl Rnepfx An Noif Table diameter: 2000 mm - 4 independent Morse tapers Maximum workpiece height: 1300 mm Number of rams: 1 Ram stroke: 1000 mm Ram section: 230 x 230 mm Spindle motor power: 55 kW Maximum permissible weight: 12 tons Spindle rotation speed: 0-160 rpm Number of speed ranges: 3 Tool changer: 14 stations Machine footprint: 5,600 mm x 6,000 mm x 6,000 mm (height) Weight: 31,000 kg USED MACHINE

Condition: used, Retrofit: 2006 Faceplate diameter: 6000 mm Turning diameter: 6500 mm Turning height: 4000 mm Support travel vertical: 2000 mm Support travel horizontal: 3250 mm Workpiece weight: approx. 80 tons Machine weight: approx. 220 tons Iisdpfx Anovk Tmgs Njf

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 670 mm, turning diameter: 490 mm, overall weight: 6,500 kg, FOR SALE: High-Quality CNC Lathe Biglia B 658 MB (Year of Manufacture 2004) with Driven Tools + KID 70 Bar Feeder Are you looking for a reliable and robust workhorse for metalworking? For sale is a Biglia B 658 MB CNC lathe in good and fully functional condition. The machine is equipped with driven tools, an automatic tailstock, a reliable Fanuc control, and includes an automatic bar feeder. The complete package is available ex stock. General Information Manufacturer: Biglia (Italy) Model: B 658 MB Year of manufacture: 2004 CNC control: FANUC Series 18i-TB Condition: Good, fully functional Availability: Ex stock --- Key Technical Characteristics (Lathe) Maximum turning diameter: 380 mm Maximum turning length: 650 mm Maximum rod/bar diameter: 80 mm Maximum passage: 620 mm Spindle speed range: 30–3000 rpm Spindle drive power: 26/22 kW Spindle end: ASA 8″ Spindle bore diameter: 90 mm Diameter of the lathe chuck: 315 mm Bidirectional turret: 12 positions Turret indexing time (per position): 0.1 s Iiodpfx Anezbx N Ee Njf Driven tool stations: 12 positions Max. speed of driven tool stations: 4000 rpm Max. torque of driven tool stations: 3.7 kW Feed in the X/Z/B axis: 220 / 650 / 660 mm Rapid traverse in the X/Z/B axis: 20 / 24 / 12 m/min Automatic tailstock maximum clamping force: 1080 Kg --- Round bar diameter: min. 5 mm (3/16") – max. 70 mm (2" 3/4) Square bar side: min. 5 mm (3/16") – max. 50 mm (2") Hexagonal bar height: min. 5 mm (3/16") – max. 60 mm (2 1/4") Maximum bar length options: 500 mm / 1615 mm Magazine capacity: 250 kg (e.g., approx. 60 bars of 10 mm) Bar change time: 50 sec (with a 1000 mm bar) Feed speed: 0–500 mm/sec Return speed: 1000 mm/sec Supply voltage: 230/400 Volt Control voltage: 24 Volt Installed power: 2 kW Weight: 580 kg Additional Equipment & Features KID 70 Bar feeder Measuring arm (Touch setter) Chip conveyor Collet chuck DIN 6343 Coolant tank capacity: 250 liters Coolant pump capacity: 150 l/min Coolant pump power: 0.73 kW Noise level: 74 dB(A) Physical Dimensions (Lathe) Dimensions (L x W x H): 4000 x 1900 x 1850 mm Weight of the Biglia B658/BM: approx. 6,000 kg Contact us today to request a quote for this complete production package! The machines are ready for immediate dispatch. > *(All information is given in good faith but we reserve the right to make errors)*

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support Iieded I Au Ropfx An Nsf -Zentral lubrication SKF/VOGEL -2 step main gear -24 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -tool magazine -machine housing -chip conveyor -cooling water preparation -Side support -... CONTROL: CNC Fagor / Siemens OTHER: Geometrical-acceptance according DIN8609

Condition: used, Year of construction: 2011, operating hours: 29,048 h, functionality: fully functional, turning diameter: 16 mm, bar diameter (max.): 16 mm, MOBILE TURRET LATHE, EVODEO 16a TYPE, WITH FANUC 16i-TB CNC CONTROL, PNC-DECO, 16MM CAPACITY / 10 AXES, WITH ELITE 220 TOOL CARRIER Including: - Base machine with 10 axes, FANUC 16i-TB - Synchronous rotating chuck, 16mm, including drive - C1 axis function - Polar coordinate function, C1 or C4 axis - S6 motor (8,000 rpm) for a maximum of 3 rotating tools on a tool system (X1-Y1), not synchronized with S1 - S2 motor (8,000 rpm) for a maximum of 3 rotating tools on a tool system (X2-Y2) - S3 motor (8,000 rpm) for a maximum of 3 rotating tools in the end position - Tailstock with positioned stop - C4 axis function - Limitation of the clamping stroke of the tailstock (system for fine adjustment of the clamping diameter) - Part extractor with adjustable pneumatic cylinder, including cleaning of the tailstock chuck with oil (maximum pneumatic cylinder stroke 150mm) - S5 motor (8,000 rpm) for a maximum of 6 rotating tools (synchronizable with S4) - 3-color light beacon, configurable (colors: yellow, red, green) - Centralized lubrication system, BIJUR type - Adaptation for work without a chuck (maximum part length 50mm) (requires one of the options 0937 to 0941) - TB-DECO ADV programming software MOBILE TURRET S1 (Z1) - 12,000 rpm - Right-hand bar rotation - Adaptation for SCHAUBLIN F22 chuck (no. 76-0071) TOOL SYSTEM (X1-Y1 / X2-Y2) - 2 independent carriages with 5 positions - 2 independent S2, S6 motors END TOOLING - Independent carriage with 4 positions - Independent S3 motor INDEPENDENT TAILSTOCK (Y4-Z4) - 12,000 rpm - Adaptation for SCHAUBLIN F20 chuck (no. 76-201) COUNTER OPERATIONS (X4) - Stations with 6 positions (3 in the end position and 3 transverse) VARIOUS - Device for evacuating and collecting parts outside the machine - Variable flow coolant pump - Lighting lamp - Electrical interface for fire extinguishing system, compliant with CE and EMC standards NUMERICAL CONTROL - FANUC 16i-TB numerical control - 10" color screen - TB-DECO ADV programming software (version 750-005 + 750-0710) Iodpjzd Sq Hefx An Neif EQUIPMENT - Adaptation for F13 chucks - Long type tool holder, 12x12mm or ½ inch section, right-hand bar rotation - Adaptation for chucks - System for adjusting the chuck clamping from the front for F13 chuck - System for adjusting the chuck clamping from the front for F20 chuck - Electrical interface 2004 (maxi2) including 2 sockets for adapting up to 2 peripherals - Swiss 230 V socket - Oil mist extraction device

Condition: used, Year of construction: 2017, operating hours: 45,000 h, functionality: fully functional, machine/vehicle number: 17L5M0045, turning length: 490 mm, turning diameter: 395 mm, spindle bore: 61 mm, travel distance X-axis: 235 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 105 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 10 m/min, rotational speed (max.): 6,000 rpm, total height: 2,085 mm, total length: 2,790 mm, total width: 1,752 mm, overall weight: 4,150 kg, The lathe was primarily used for the production of spacers, distance sleeves, and other stainless steel fasteners. It has always been operated by professionals and professionally maintained. Iodjxylzdopfx An Nsif

Condition: not inspected (used), Faceplate: 2500 mm Swinging diameter: 3200 mm Max. turning height under tool: 2500 mm Max. workpiece height under support: 2780 mm Max. workpiece weight: 25 tons Cross slide: 2000 mm Ram travel, vertical: 1600 mm Iijdpfjzdk A Usx An Nsf Ram travel, horizontal: 1800 mm Ram cross-section: 250 x 300 mm Smallest distance between two rams: 1150 mm Faceplate drive: 71 kW Faceplate speed: 125 rpm Milling drive motor: 18 kW Milling drive speed: 1600 rpm Milling drive torque: 710 Nm

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm Iijdpfxszi Awho An Njf A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Control: Fagor Faceplate: 5420 mm Turning diameter: 6540 mm Iijdpfx Anjvzqm Ej Nsf Max. turning height: 3500 mm Support (ram) stroke vertical: 1680 mm Support (ram) stroke horizontal: 3250 mm Workpiece weight: 60 tons Machine weight: 190 tons approx. Hydrostatic faceplate

Condition: new, Year of construction: 2025, Ref. -No.: 10461 Manufacturer: IGREK Type: DT 4000 Year of construction: 2025 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D SL Storage location: Istanbul Country of origin: Türkiye Spindle Speeds: 4000 RPM Turning Height: 2000 mm Table Diameter: 4000 mm Spindle power: 37 kW Max. Table load: 40 t Rotate table rotation speed: 60 RPM Max. Turning diameter: 5000 mm Max. Turning height over faceplate: 2000 mm Max Spindle Torque: 1200 Nm Spindle Taper: ISO 50 Ijdpfxjxmd Sue An Njif Machine length: 7500 mm Machine width: 12000 mm Machine Height: 9500 mm Weight Of The Machine Ca.: 125 t Further information: Ram Slide Stroke: 2100 mm Ram Section: 350 x 350 mm Vertical Travel of the Moving Traverse: 2000 mm Table Drive System: Segmented Direct Drive Motors Table Torque: 8200 Nm - 14400 Nm max. Table Guide System: Hydrostatic Bearing and Guides IGREK DT 4000 – Your solution for precise heavy-duty machining The IGREK DT 4000 is a state-of-the-art CNC vertical turning center designed specifically for the precise machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable crossbeam, it enables the efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key features: Hydrostatic rotary table: The 4,000 mm rotary table with hydrostatic bearing ensures maximum precision and smooth running when machining heavy workpieces. Movable crossbeam: The vertically movable crossbeam with a stroke of 2,000 mm offers flexibility and allows adaptation to different workpiece heights. Powerful spindle: With a spindle speed of up to 4,000 rpm and a power of 37 kW, the machine is designed for demanding machining tasks. High load capacity: The rotary table can accommodate workpieces weighing up to 40 tons, enabling the machining of large and heavy components. Multifunctional machining: Thanks to the live spindle and the precise positioning of the C-axis, milling and drilling operations are possible in addition to turning, which increases the versatility of the machine. The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the requirements of modern manufacturing processes. Its robust construction and wide range of machining options make it the ideal solution for the precise machining of large components in various industries.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 5101163, spindle motor power: 30,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, type of input current: three-phase, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, total height: 3,800 mm, total length: 9,100 mm, total width: 7,300 mm, distance table center to spindle nose: 950 mm, overall weight: 29,000 kg, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 700 mm, coolant supply: 20 bar, table length: 3,500 mm, table height: 900 mm, table width: 1,200 mm, number of slots in tool magazine: 45, Equipment: chip conveyor, documentation/manual, The machine is in working condition and has no problems. Ijdpjzq Rz Dofx An Njif

Condition: excellent (used), Year of construction: 2017, operating hours: 2,728 h, Doosan Puma GT2100 CNC Slant Bed Lathe With Doosan-Fanuc I Series Control Iijdpfxezt R Ucs An Nef With Samchully MH-208 V1 Ø203mm 3 Jaw Power Chuck. Maximum Swing Ø600mm. Maximum Swing Over Cross Slide Ø390mm. Maximum Turning Ø390mm. Maximum Turning Length 562mm. Bar Capacity Ø65mm. Axis Travel 'X'=230mm, 'Z'=580mm. Rapid Feedrates 'X'=24m/min, 'Z'=30m/min. Spindle Nose A2-6. Maximum Spindle Speed 4,500rpm (18.5kW Motor). 12 Station Turret. Programmable Tailstock Travel 580mm, Tailstock Quill Ø80mm, Quill Travel 80mm, Taper MT4. Tool Shank 25 x 25mm. S/No. ML0228-001618 (2017). Note: Low Running Hours 2,728. With Coolant System, Tool Setter, Parts Catcher, Ø165mm Collet Unit, Foot Switch, Quantity Of Assorted Hard/Soft Jaws & Manuals. Approx Dimensions L2,940 x W1,632 x H1,700mm. Weight 3,500kg.

Condition: used, GILDEMEISTER NEF 320 is a CNC turning lathe engineered for precision machining, high accuracy and operational reliability. Working capacities: max. turning diameter 320 mm, max. turning length 740 mm, centre height 160 mm, distance between centres 750 mm, spindle hole 52 mm; travels Z 700 mm, X 185 mm. Main specs: spindle power 11 kW, max. torque 410 Nm, speeds stepless 4–4000 t/min, spindle taper MT 6; tailstock Morse taper 5, spindle stroke 120 mm, spindle diameter 70 mm; rapid traverse X 8 m/min, Z 10 m/min; weight ~2000 kg, dimensions 2450×1668×1825 mm. Enables tight tolerances; typical applications include automotive, watchmaking, toolmaking, aerospace and medical sectors. Iijdpfx Aoyxnugsn Nsf

Condition: excellent (used), Year of construction: 2015, operating hours: 1,300 h, functionality: fully functional, machine/vehicle number: NRX20151106, Machinetype: Chucking Automatic Lathe - Multi Spindle Make: DMG MORI Type: NRX 2000 MC New in: 2015 Control: CNC Location: North Rhine-Westphalia Origin: Japan Term of delivery: to be agreed Quotation: ex site Description: CNC - Double Spindle Turning and Milling Center DMG MORI - NRX 2000 MC Double Front Spindle Simultaneous Parallel Machining Tool Drive Portal Loading Tool-Piece Carriage 14 pos. (Ø 40 - max. 150mm) approx. 1,500h Spindle-hours. Technical details/ additionals / accessories Text Dimension Unit number of spindles 2 swing diameter max. 348 mm turning diameter max. 150 mm standard turning dia. 120 mm turning length max. 80 mm distance between spindles 670 mm control COMPACTline M73 Workspindle: number of spindles 2 max. spindle speed max. 5,000 min/-1 power capacity 7.5 / 5.5 kW spindle nose JIS A2-5 spindle bearing diameter - mm spindle bore - mm max. bar capacity - mm usable bar diameter - mm chucking diameter 200 mm C-Axis 0.001 ° turret: Number of Turret 2 number of tool positions 10 pos. Shank height for square tool 20 mm Drill shank diameter 32 mm turret change time 0.31 sec. Driven Tool Stations: driven station 10 pos. Spindle speed - driven tool stations max. 10,000 min -1 power capacity - driven tool-stations 1.5 / 1.2 kW movement areas: x-axis 1+2: 100 mm z-axis 1+2: 220 mm C - Axis 1+2: 360° feeds: rapid traverse ( X / Y / Z ) 30 m/min feed speeds max. 30,000 mm/min Tip feed 0 - 5,000 mm/min total power requirement 32 kVA weight of the machine approx. 5.6 t dimensions of the machine approx. 5.0 x 3.0 x 2.2 m Chip conveyor Iisdpfswnyi Iex An Njf Coolant system electric hand wheel gantry loader Workpiece-storage Tool drive mechanism

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Iiodpfx Ansytn Ems Nef Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Maximum height 350 mm Turning length 1000 mm Maximum turning diameter over bed 600 mm Maximum turning diameter over cross slide 360 mm Spindle bore 107 mm Speed range 16 – 3150 rpm Feed rate range, longitudinal and transverse 0.5 – 5000 mm/min Rapid traverse rate, longitudinal and transverse 9 m/min Main drive 30 kW Machine dimensions with chip conveyor, L x W x H 5400 x 2200 x 2000 mm Weight 6400 kg Iiodpfovr Eh Esx An Njf Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT screen General description: CNC manual data input control with program input via function and numeric keys. Input of all information in dialog with the screen. Integrated menu system and display of all functions in plain text. Control panel, screen and handwheel in a separate chip guard. The EPL control offers the following possibilities: Programs can be entered and modified with direct operator guidance via the EPL control without program-technical preparation. NC programs in ISO/EIA standard can be entered, output or entered manually via the serial interface RS 232. Machining cycles: Turning cycles for longitudinal, transverse and contour turning, also with allowance. Threads. Chamfer DIN 509 form E and F and DIN 76, also grinding allowance can be programmed. Axial and radial grooves according to DIN 471 and 472, also with bottom chamfer. Radii 90° and chamfers 45°. Automatic tool radius compensation for cycles, chamfer, groove, radius, chamfer. Programming: Sentence-oriented, metric/inch, diameter with absolute input, radius with incremental input, full circle programming, subprogram technique, masking levels for program parts. Zero point offset. Selection of operating modes via menu. Program input and output: In dialog via menu with operator guidance or directly in dialog • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, of which 6 positions are standard tool holders + 6 positions are driven tool holders • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (more on request) Overhauled servo drive for the main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 340 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 215 mm, spindle motor power: 30 W, turning diameter: 200 mm, turning height: 200 mm, rotational speed (min.): 4,000 rpm, Manufacturer: FAMAR Model: ERGO 250 Category: Vertical CNC Lathe Year: 2004 CNC Control: Siemens 840D Specifications Maximum turning diameter: Ø 350 mm Maximum machining diameter: Ø 200 mm Maximum machining height: 200 mm Spindle Integrated electric spindle Chuck: Ø 250 mm Spindle nose: ASA A2-6 Spindle speed: 6,000 rpm Spindle power: 30 kW Axes X-axis: 340 mm (820 mm total) Y-axis: 120 mm (±60 mm) Z-axis: 215 mm C-axis: 360° with 0.001° resolution Heidenhain optical scales on the axes Rapid Traverse Rates X-axis: 60,000 mm/min Y-axis: 20,000 mm/min Z-axis: 30,000 mm/min Turret 12 positions Powered tools Powered tool speed: 4,000 rpm Powered tool power: 8 kW Turning tools: 25x25 mm Boring bar: Ø 40 mm Equipment Automatic loading/unloading system Pallet shuttle with workpiece pallets Chip conveyor Coolant tank with high-pressure pump Fixed and powered tool holders Manuals and electrical diagrams CE declaration Iisdpfezdu Dpjx An Nsf General Data Installed power: 50 kW Machine weight: 10,000 kg Dimensions: 5,200 x 3,200 x 3,200 mm (L x W x H)

Condition: used, Year of construction: 2006, operating hours: 29,199 h, functionality: fully functional, machine/vehicle number: AK0272, Equipment: documentation/manual, - Year of manufacture: 2006 - Fully functional, powered on, ready for demonstration - With driven tools - With sub spindle - Siemens 840 D control - Incl. chip conveyor - Swing diameter over bed: 685 mm - Centre distance: 526 mm - Travel paths: X 240 mm / Z 640 mm / B 520 mm - Rapid traverses (X, Z, B): 18 / 24 / 24 m/min Iedpfx Ansxgrymj Njif Net price ex location Luckenwalde (Germany), unloaded, without transport