Used Cold Water for sale (8,885)

Condition: used, Year of construction: 2008, OMAX 60120 P3060V 30HP (22kW) 4100 Bar EnduroMAX - machine including crank pump 30HP (22kW) 4100 Bar EnduroMax - working table 3656 mm x 1956 mm Rjdjtmp T Dopfx Ab Roch - X - Y axis travel 3200 mm x 1575 mm - air cushion (allows material to be cut while submerged) - control computer compatible with Windows 10 and OMAX Layout&Make Premium software - premium software - integrated diamond orifice head - OMAX 300kg abrasive feeder Full overhaul of the machine performed in 2024 (year of production 2008) Possibility to equip the machine with additional accessories for an extra charge.

Condition: ready for operation (used), Year of construction: 1974, disk of circular saw-Ø: 400 mm cutting area at 90° round: 120 mm Rcjdpfx Ajtp Hgtob Roh cutting area at 90° square: 200 x 80 mm cutting area in mitre at 45° square: 150 x 70 mm cutting speed: 13, 17, 26 m/min engine: 380 V, 1,7/2,2/2,6 kW space needed: 1050 x 1000 x 1680 mm weight: ca. 850 kg

Condition: ready for operation (used), Year of construction: 1987, Recooling capacity at water flow temperature of 15/10°C: 2.3/2.1 kW Volume flow: 0.5 m³/h Rsder Ezdrspfx Ab Roch electrical Connection: 380 V, 1 kW Space requirement: 900 x 600 x 1020 mm Weight: 160kg Water connections reduced to 1/2".

Condition: good (used), Year of construction: 2021, cooling capacity: 25 kW (33.99 HP), In good condition, CO2 installation & cold room built in 2021. Cold room temperature of +-4°C and an evaporating temperature of -8°C. The installation includes the following: Rodpfxerz R Ars Ab Rech One cold room storage with a panel thickness of 100 mm and an isolation value of RC 5,21. Further, the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machine set and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a Bitzer 2HSL-3K-40S & Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a Danfoss MMI control display. Dimensions: 1000x800x2200 mm (LxWxH) & weight: 820 kg. Delta FMT-7028 (x4) evaporators with a capacity of 6,3 kW. Each evaporator has 2 fans that have a diameter of 350 mm and an airflow of 3.000 m³/h. Dimensions: 1370x470x465 mm (LxWxH). Eco KCE62M6V.4314 gas cooler with 2 EBM-Papst A3G630-AR85-90 fans - 50/60 Hz - 0,97 kW - 1140 RPM - diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information and additional pictures!

Condition: good (used), Vice for cold circular saw, saw vice Rcsdpfx Ajr A H Siob Reh -Vise: from a cold circular saw manufacturer FCB type OMP 06 -Dimensions: see photos -Dimensions: 700/200/H200 mm -Weight: 28kg

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control year-round + rapid hydration during mixing without ice + fluffier doughs thanks to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning + hygienically impeccable, clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel refrigeration evaporators + multiple stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface structure + low energy consumption SPECIAL accessories, optionally available at an extra charge: - Wall bracket made of stainless steel (for models L60 + L100): + €319.00 net - Machine table (for model L100): + €389.00 net - 3-way switching valves --- for water mixing and dosing units with only 2 inlets (cold / warm) Rcodpfxoivdvco Ab Reh + €349.00 net Technical data: - Batch size (recommended): up to 30 liters - Continuous output*: 60 liters / hour - Peak cooling capacity*: 180 liters / hour - Ice bank: 20 kg - Cooling capacity (CECOMAF): 1,189 kW - Connection values: 230 V - 50 Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters / min - Dimensions: 950 x 530 x 560 mm (LxWxH) - Net weight: 60 kg - Energy consumption per 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 24-month warranty Stainless steel model Advantages: + Excellent price-performance ratio Redpfx Aeivdxmsb Roch + Simple and quick installation and operation + Housing made entirely of stainless steel + Can also be combined with an ice water system + Unit automatically opens the required water supply, providing hot/chilled water + Delivers the correct mixture until the desired temperature is reached + Powerful electronic system based on a microprocessor + Water dosage from 0.1 to 99.9 liters or 1 to 999 liters + Temperature fluctuations are automatically compensated + Digital display of water temperature and quantity + Temperature is adjusted with a thermostatic mixing valve (rotary knob) + Fast supply of spare parts within 1-2 working days STANDARD accessories included in the price: - 1x drain hose (2 meters long) with hanging hook Technical data: - Dosage quantity: 0.1 - 99.9 liters or 1 - 999 liters - Temperature range: 0°C to +40°C (depending on water supply) - Power: 25 W - Water pressure: 2 - 4 bar (recommended) - Connection values: 230 V - 1 phase - 50/60 Hz - Dimensions: 305 x 120 x 390 mm (W x D x H) - Net weight: 6.8 kg

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water reservoir -Pump: Manufacturer Elpu Type N 120 -Power: 0.085 kW -Speed: 2800 rpm Rcsdpfeif Satex Ab Rjh -Dimensions: 570/540/H370 mm -Weight: 24 kg

Year of construction: 2006, condition: excellent (used), Dispensing hot food products is normally associated with a number of health and safety risks. These risks are minimized with a fully automated dispensing system. The controls make sure that the operator avoids any direct contact with the 90°C hot product. The automatic bag-packing unit seals the bags once they are filled. Furthermore the need for lifting products over long distances is reduced since the ready packaged dishes are transported from the filling station to the operator via a small conveyer belt. This prevents inappropriate working positions. Rodpfx Aboh A Hbxj Roch HOT-FILL DOS 3 ensures uniform portions. The quantity is controlled via the touch- screen display. The display also controls how quickly the product is to be dispensed allowing for flexibility in the workflow. The fully automated HOT-FILL DOS 3 sucks the product directly from the kettle and is fitted with a temperature alarm consistently ensuring the correct temperature of the product.

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 47 kW (63.90 HP), type of input current: three-phase, overall weight: 240 kg, noise level: 34 dB, input frequency: 50 Hz, Equipment: freezer, Ciat Dynaciat LGN 120 CIAT DYNACIAT LGN120 liquid chiller without condenser. manufacturer: CIAT DYNACIAT year of manufacture: 2005 Electronic control cooling capacity: 34/47kw Compressor 1pc Rcjdjvzrxcepfx Ab Rsh - Hermetic SCROLL type SZ125S4CC refrigerant R407C Evaporator - Brazed plate heat exchanger heat exchanger capacity: 4.2 liters - Plate patterns optimized for high efficiency - 19 mm armaflex thermal insulation connection: 1.5" machine dimensions: height: 121cm full core: 160cm width:79cm length:88cm weight: 190kg - Electronic expansion valves - Service valves on the liquid line ■ Control and safety devices - Water temperature control sensors - Evaporator frost protection sensor - Factory-installed evaporator water flow regulator - 24V control circuit - Connect the Touch microprocessor-controlled electronic control

Condition: good (used), oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm Rodpjv Aip Uefx Ab Roch -Weight: 22 kg

Condition: used, Cooling unit, water-cooled condenser, DALEX Type DRF 2 Machine No. 38913719, Year of manufacture 1989 Flow rate 0.35 m3/h Cooling capacity 1950 Watts Operating pressure 2 to 3 bar Refrigerant R 134a; unit was converted from R12 to R134a Operating overpressure 18 bar Rsdpsg D H Ruefx Ab Rech Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volts, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Condition: excellent (used), Offered here is a heavy, well-preserved cold circular saw from the company Trennjäger. Data: Saw blade: 275 x 2.5 x 40 T8 = Z110 Two speeds Angle adjustment: from 90°-0 Rcsdpfjg Rxh Djx Ab Roh Equipment: Hydraulic vice hydraulic feed (infinitely variable) Integrated coolant system

Condition: excellent (used), Coolant pump, immersion pump, coolant pump, centrifugal pump, cooling lubricant pump -Manufacturer: Grundfos, coolant pump type SPK1-11/8 AAA -Drive: 0.25 kW 2850 rpm Rjdpfjhtryxox Ab Rech -Max. flow rate: 1.0 m³/h -Max. delivery head: 22 m Maximum temperature: 90 °C -Dimensions: 180/150/H590 mm -Weight: 11 kg

Condition: good (used), Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm -Total dimensions: Ø 590 x 1160 mm Redoq Ei Dbspfx Ab Rsch -Weight: 27kg

Condition: used, Year of construction: 1993, machine/vehicle number: 5/4573, total width: 7,500 mm, total height: 11,400 mm, overall weight: 45 kg, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the scope of delivery) Rcedpeqmmalefx Ab Rsh The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Year of construction: 2013, condition: good (used), machine/vehicle number: 3063, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. Redpfx Aoqmmffeb Rsch The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Condition: used, Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Unfortunately the type is no longer readable -Container content: approx. 25 liters -Total dimensions: 420/360/H3500 mm -Weight: 13 kg Rcsdpfx Ajqbycbeb Rsh

Year of construction: 2006, condition: like new (used), Details on request Rcsdpfx Absfla Emo Roh

Condition: used, Year of construction: 1980, saw blade diameter 380 mm Rcedpfxod N Sm Dj Ab Rjh pneumatic clamping ja 46893 weight of the machine ca. 1,3 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), High-intensity cold-light illumination system for macroscopic applications, lamps, luminaires, lighting, cold-light device, cold-light lamp -Manufacturer: Classen Co, cold light device cold light lamp type L 151 -Voltage: 220 V -Lamp: 15V/150W Rjdpjud Utvsfx Ab Rsch -Hole for the optical fibers: Ø 15 mm -Dimensions: 260/165/H190 mm -Weight: 5.6 kg

Condition: used, TECHNICAL DETAILS - Parts per minute : 400 - Rivet length : 12 [mm] - Drilling depth (max.) : 5 [mm] Rcjdpouhb Tkjfx Ab Roh - Cutting diameter : 3 [mm] - Floor space (width) : 1.12 [m] - Floor space (length) : 2.21 [m] - Height : 1.77 [m] - Motor : 4 [hp/kW] - Net weight : 2,500 [kg] - Gross weight : 3,000 [kg] EQUIPMENT - Tooling as per photo

Year of construction: 2023, condition: like new (used), HHS cold glue applicator with 4 heads Redpfx Abjzzar Hj Rech KFE-E-KP6-MEP 4x HD hose PTF-1/4″ + one spare head Complete unit, new price: €17,000 The unit has only been used once and is otherwise in new condition.

Year of construction: 2020, condition: used, This listing is for Puro-i III | RO Water Purification System The unit is in full working condition and ready for immediate use The Avidity Science Puro-i III is an integrated reverse osmosis water purification system designed to produce Type III laboratory water directly from potable tap water. Depending on configuration, the system provides production rates from 5 to 30 L/hr, with dispensing at up to 2 L/min. Features include twin-pass RO technology, automatic RO sanitisation and an interactive touchscreen interface. Typical specifications include Type III water production, up to 99% inorganic rejection and feed-water pressure of approximately 0.5–6 bar. Available configurations include different production rates, reservoir conductivity monitoring and loop options Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most Rcedpfxsz D H D Es Ab Rjh carbon-efficient way to equip a modern laboratory.

Condition: used, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180 x 100 mm Working height 925 mm saw blade turning speeds 17 - 70 U/min total power requirement 3,0 kW dimensions of the machine ca. 1,8 x 1,1 x 2,0 m Automatic cold circular saw Rjdpfx Abezlkvdj Rjch - CNC control - Micro-lubrication system