Used Colomn Drill for sale (4,887)

Condition: used, Year of construction: 1990, Archdale Radial Drill. Spindle speeds 475-2000. Box table Power Rise and Fall DC Injection Spindle Break Speeds 4-2000 rpm Lasdpfx Asz Hfdvehaoh 8 Hp.

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft Lodpszk N Dwsfx Ahajah - 1.5 kW motor with 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits - Machine needs to be inspected/serviced. Basic functions are intact Availability: available shortly Location: 63934 Röllbach

Condition: used, Year of construction: 1997, Used machine Year of manufacture 1997 Lasdpfxszlbqfs Ahajh Universal dowel drilling machine with drilling from below heavy cast-iron table pneumatic swivel device; effortless changeover from vertical to horizontal or to any mitre angle drilling unit with digital positioning for zero-edge transfer, touch stops are used which, during horizontal drilling, transfer the tool thickness to the vertical drilling for row-hole drilling, the stop system is slid into guides on the side of the machine table Working width 700 mm Portal clearance max. 850 mm Drilling depth max. 80 mm Operating pressure 6-8 bar Motor 1.9 kW Spindle speed 2800 rpm 21 spindles, pitch 32 mm Spindle spacing min. 32 mm Spindle spacing max. 640 mm Space required L x W x H 960 x 630 x 1140 mm Weight approx. 300 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 50 mm throat 400 mm bore stroke 250 mm Ledpfxezlkv Ds Ahaoah taper MK 4 MK table-size 705 x 580 mm feeds 0,1 - 0,2 - 0,3 - 0,4 mm/U turning speeds 60 - 1205 U/min total power requirement 4,0 KW weight of the machine ca. 0,85 t dimensions 1,2 x 0,8 x 2,55 m Column drilling machine with: - Power feed - Left/right rotation - Coolant pump - Machine light

Condition: used, Boring power 23.0 / 28.0 mm Boring depth max. 140 mm Center of spindle to wall or column 300 mm Column diameter 125 mm Laodexabbyjpfx Ahajh Size of table plate 415 x 385 mm Speed 100 - 2000 U/min. spindle taper MT 2 MK voltage 380 V Motor output 0.9 / 1.4 KW weight of the machine ca. 225 kg Dimensions (L/W/H) 900 x 600 x 1960 mm maintained condition (!!) Furnishing: - V-belt operated column drilling machine - Right/left running of the work spindle - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug * Machine link: ?machineno=1008-9103760

Condition: new, bore capacity in steel (diameter) 60.0 mm threading M 42 throat 350 mm bore stroke 200 mm turning speeds 60 - 1530 U/min table: 720 x 510 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 200 mm feed 0.15-0.2-0.3-0.36 mm/U distance spindle /table 159 / 884 mm engine output 3.6 / 4.3 kW weight 605 kg Machine height 1950 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection Ljdpfexabgisx Ahajah - Spindle protection with electr. validation - digital speed display - machined base plate including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 - LED machine light pos. 12.

Condition: new, bore capacity in steel (diameter) 32,0 mm threading 22 M bore stroke 125 mm throat 280 mm morse taper 3 MK table: 450 x 380 mm / 14er Nut Lajdpfjxabiqox Ahash turning speeds 70 - 3.500 U/min feed 0,1 / 0,2 / 0,3 mm/U column diameter 110 mm weight 320 kg range L-W-H 500x800x2.100 mm total power requirement 1,1 / 2,2 kW characteristics Infinitely variable speed, ideal for setting the desired one Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Key chuck 1 - 13 mm / B 16 - coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector - LED machine light - Digital speed display - First filling with Shell Tellus 46 - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm turning speeds 100 - 1800 U/min column diameter 145 mm thread M 24 ST60 thread M 30 GG20 feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 138 / 688 mm engine output 1.4 / 2.2 kW weight 470 kg Machine height 1865 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - Electromagnetic feed clutch * with overload protection and electrical * Comfort cross-handle switch * Feed rates selectable 0.1-0.2-0.3-0.4 mm / rev - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation Lsdpfx Ahexab Nksasah - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Condition: reconditioned (used), functionality: fully functional, Drilling Machine Brand: GSP Model: 407C22 Ledpfxsy D Hr Us Ahaoah Reach: 2250 mm Drilling capacity (steel): - Normal feed: 70 mm diameter - Slow feed: 90 mm diameter Carriage travel on arm: 1900 mm Drilling radius (min. - max.): 630 - 2500 mm Height (min. - max.): 500 - 1750 mm Vertical arm travel: 850 mm Spindle stroke: 400 mm Spindle speeds: 25 to 1400 rpm Motor power: 6 kW Spindle taper: MT 5

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Ljdpfxoy Nd T Hs Ahaoah Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 60 - 1800 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t Lodsy Aa H Njpfx Ahaeah dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: used, bore capacity in steel (diameter) 32 mm throat 325 mm Ledpfxey N D Ikj Ahaeah bore stroke 170 mm taper MK 4 MK table-size 570 x 480 mm feeds 0,1 - 0,16 - 0,25 mm/U turning speeds 60 - 1600 U/min total power requirement 2,9 KW weight of the machine ca. 0,65 t dimensions 1,2 x 0,8 x 2,15 m Pillar drilling machine with: - Feed - Variable spindle speed - Coolant pump - Machine light

Condition: good (used), bore capacity in steel (diameter) 28 mm arm length 700 mm workpiece height max. 1300 mm Ljdpfxszfqmcs Ahajah tool taper MK3 feeds 0,1-0,3 mm/U spindle turning speed range 100-1.220 U/min total power requirement 1,4 kW weight of the machine ca. 1,3 t dimensions of the machine ca. LBH 1,8 x 0,8 x 2,3 m Incl. cube table Incl. drilling feed Mechanical clamping

Condition: excellent (used), Attachment holders, standard holders and accessories, spiral drill bits, BILZ spiral drill bits, reaming bits, BILZ reamers, BILZ holders, tool holders, drill bit mounts, twist drills -Mounted tool holder: 8 pieces -Recordings: MK5, MK4, MK3 Lasdpfxjyrgwxs Ahajh -Spiral drill bits: 35 pieces -Sizes: Ø38 mm - Ø95 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 550/300/H70 mm -Weight: 28 kg

Condition: ready for operation (used), Year of construction: 1989, Semi-automatic broach sharpening machine 3M601Ф1 Manufacturer: Vitebsk Tool Grinding Machines Ledjzx Timopfx Ahajah Specifications: Max. external diameter of round broaches: 250 mm Max. workpiece length (between centers): 2000 mm Application: Round, spline, flat, face, and keyway broaches.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 585 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 145 mm, spindle speed (max.): 2,340 rpm, spindle speed (min.): 32 rpm, spindle mount: MK 0, throat depth: 293 mm, quill diameter: 72 mm, quill stroke: 145 mm, total length: 1,340 mm, total height: 2,050 mm, table width: 225 mm, total width: 1,280 mm, table length: 800 mm, drilling capacity: 40 mm, spindle nose: ISO40, spindle diameter: 72 mm, nominal power: 3 kW (4.08 HP), Milling-/Drilling Machine, DRO, drilling capacity Ø 40 mm, motor 2,2/3,0 KW, table size 800x225 mm, spindle speed 32-3240 rpm stepless, ISO40, pneum. tollclamping el. tapping device, table stroke X/Y 585/240 mm, automatic spindle feed, coolant device, dimensions 1340x1280x2050 mm, weight ca. 780 kg Lajdpfxjz Rqfzo Ahajh

Condition: good (used), Year of construction: 1980, machine/vehicle number: 22237, Offer 26272 Technical data: Ledpjz Rm Hnefx Ahaeah - Drilling capacity in steel ST 60: 21.5 mm - Drill spindle mounting: MK 2 - Drill spindle stroke: 120 mm - 3 drill spindle speeds - Overhang: 260 mm - Max. distance table - drill spindle: 620 mm - Table with 2 T-slots: 380 x 320 mm - Height adjustable via rack and pinion with hand crank - Power supply: 400 V - Space required: approx. W 550 x H 1800 x D 750 mm - Weight: approx. 200 kg

Condition: good (used), functionality: fully functional, Speed adjustable in a continuous range from 60 to 1600 rpm, threading function, feed mechanism, swivel table. Laedpsz Rmnrsfx Ahaoh

Condition: used, Year of construction: 2000, power: 1.5 kW (2.04 HP), input voltage: 400 V, type of input current: three-phase, KNUTH KTB 32 Column Drilling Machine – 32 mm, 400 V For sale: KNUTH KTB 32 industrial pillar drilling machine, manufactured in 2000. Heavy-duty floor-standing column drill with belt drive, adjustable worktable, and mechanical speed adjustment. Suitable for drilling operations in metalworking workshops, maintenance departments, and production facilities. Technical specifications: Manufacturer: KNUTH Model: KTB 32 Year of manufacture: 2000 Lodpfjz R Dy Ssx Ahaeah Serial number: 0002017 Maximum drilling diameter: 32 mm Motor power: 1.5 kW Power supply: 400 V, three-phase, 50 Hz Spindle taper: MT3 / MK3 Approximate dimensions (L × W × H): 800 × 500 × 1800 mm Approximate weight: 140 kg Drive: Belt-driven Worktable: Height-adjustable Quantity: 1 unit Condition: Used machine. The actual condition and included equipment are shown in the photographs. No specific functional test results are provided. Location: Gatciems, Latvia. Inspection is possible by prior arrangement. Loading assistance is available. Transport within Europe can be arranged upon request. MixStock reference: 50026-26

Condition: as good as new (ex-display), functionality: fully functional, A very nice paper drill is for sale (like new). Type 290, with 2 drilling heads and a sliding table, 230 volts. Lodpfx Ahez N Ag Ieaeah Powerful motor. User-friendly. You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (within the Netherlands). Best regards, Henk Hoos.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 6234-3, drilling capacity: 40 mm, total length: 3,490 mm, quill stroke: 200 mm, total height: 2,950 mm, total width: 1,800 mm, table length: 1,800 mm, spindle speed (max.): 2,800 rpm, table width: 600 mm, type of input current: AC, overall weight: 2,900 kg, column diameter: 195 mm, input voltage: 400 V, input frequency: 50 Hz, distance table to spindle center: 705 mm, spindle motor power: 5 W, table height: 900 mm, distance table center to spindle nose: 95 mm, input current: 25 A, • Work table 1800 x 600 mm with 4T slots Lajdoz R Rv Ropfx Ahash • Arm travel distance 1050 mm • Drilling spindle SK 40 with tool clamping device • Stepless speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm on the machine base at the rear • 2 T-slots 18 mm on the machine base on the left • Thread cutting device • Central lubrication • Coolant system • CE marking • Includes attachments as shown in the photo

Condition: excellent (used), two speed with switch belt gear motor power 0,8kW Lasdpsyxcxaofx Ahaoh clamp connection 380V

Condition: excellent (used), functionality: fully functional, pneumatic clamps Ljdpfx Ahezz N N Ueaoah automatic material feeding unit angle regulation pneumatic movement of heads material support slot length regulation slot distance regulation

Condition: excellent (used), functionality: fully functional, 4-speed gearbox speeds from 180 to 2000 rpm motor power 0.75 kW drilling depth stop up/down adjustment Lasdpfx Ahsyxcu Ijajh vice available at extra cost

Condition: used, Spotlight drilling machine, drilling fixture For drilling holes for lighting fixtures, cable passage holes, and spotlight holes in suspended cabinets, display cases, and carcasses. You can find more new and used items in our shop! International shipping costs available upon request! Lajdpfx Ahsvdc T Noaeh