Used Copper Granules for sale (1,190)

Condition: good (used), Year of construction: 2005, 1.0 units, used. Shredder including dust extraction system and soundproof housing Manufacturer: RAPID Year of manufacture: 2005 Type: 3590-KL6 Hodo Ahd Tpepfx Afgow Feed opening size: 350 mm x 900 mm Rotor diameter: 900 mm Motor power: 22 kW

Year of construction: 2024, condition: new, functionality: fully functional, The copper wire granulator can recycle waste copper wire into separated copper and plastic, the process capacity is 100-180 kg/h, the dry physical crushing method does not produce pollution. The granulator is sold with a pre-shredder and a conveyor belt with magnet! Design and manufacture 99.99% excellent efficiency and reliability, advanced technology: ● Airflow gravity sorting system to discharge the copper particles from the insulation. ● Strong vibration separator to separate the weight of the copper granules from the insulation ● Self-cleaning dust collection system to reduce maintenance time and remove dust. ● The machine is compact and takes up little space ● 99.99 % copper purity recovery rate ● High reliability ● High productivity ● Robust and versatile ● Long service life Hjdpfeu Tq S Hex Afgsw ● Cost-effective Technical specifications Model GRS 180KG Current voltage 380V Power output 8,7 kW Frequency 50 Hz Processing capacity 100-180 kg/h Size of machine 80*137*204CM Net weight 518 kg

Condition: ready for operation (used), Year of construction: 2010, operating hours: 20,000 h, functionality: fully functional, overall weight: 15,000 kg, rotor diameter: 500 mm, rotational speed (max.): 200 rpm, power: 90 kW (122.37 HP), input voltage: 400 V, type of input current: three-phase, The MeWa Universal Granulator UG 1000 is a high-performance, stationary single-shaft secondary shredder, specifically designed for the fine shredding and recycling of various composite materials and waste. The machine operates according to the principle of a guillotine shear, in which the material is cut between rotating and stationary blades. Drive power: 90 kW Cutting chamber / working width: 1,000 mm Hsdpfx Ajz Antuofgsw Number of blades (rotor / stator): 25/5 blades Rotor diameter (circle of rotation): 500 mm Total weight: approx. 15 tons Screen size: Flexible, interchangeable screens under the rotor determine the final particle size (typically between 10 mm and 80 mm).

Year of construction: 2026, condition: new, functionality: fully functional, New dual-sensor conveyor metal detector. Detects ferrous and non-ferrous metals (stainless steel, aluminium, copper, brass) on 1000 mm conveyor belts before they reach crushers, mills, granulators or shredders. Hsdpfx Aozmnwnofgsw - Upper and lower sensor, separable design for easy installation on existing conveyors - Adjustable sensitivity and interference settings - LCD control unit, dry-contact relay outputs for conveyor stop, alarm or diverter - PLC integration, optional rivet sensor, beacon and siren - Mechanical design adapted to the conveyor on site Made in Türkiye. Delivery FCA Ankara.

Year of construction: 2026, condition: new, Josan & Söhne ‼️ NEW – NOW EQUIPPED WITH SIEMENS TOUCH SCREEN ‼️ For easier operation and enhanced control! Leasing options available directly through us! Linear payment schedule with no balloon payment at the end! - 36 months: rate factor 3.0694% - 48 months: rate factor 2.3697% - 60 months: rate factor 1.9456% German quality, CE-certified, compliant with EU standards, and available for live demonstration. We recommend purchasing locally here in Germany for German warranties, legal security, fixed prices, and future German-speaking support – available exclusively for machines bought directly from us. Visit us and see the quality for yourself – live demos are available on-site by appointment. ‼️ Our latest innovation – a unique system, only available with us in Heilbronn. Water-cooled, highly efficient, producing ultra-clean copper granulate (99.7%). We are a German company operating under German law. Top-quality with warranty and service. Our certified, German-speaking technicians provide ongoing support, including our own fleet of trucks and service vans for fast assistance and expert guidance. Experience Josan Recycling quality at an excellent price – don’t rely solely on pictures and videos for your purchase decision. We granulate ourselves and show you live demonstrations of our machines. The S600, developed and assembled in Germany, features water cooling and integrated fans. From small businesses, SMEs, and startups to large enterprises, we offer customized solutions – including financing, hire-purchase, or leasing. Process household cables, industrial cables, telephone cables, and more with our copper granulation plants to achieve up to 99.7% copper separation. The PVC fraction is also separated and can be sold to recyclers for further processing. Source your cables locally and produce copper – recycling in an environmentally responsible way saves resources. Generate copper (and revenue) with our recycling plants. Our systems also enable copper radiator separation: - Input: copper/aluminum radiators - Output: segregated copper and aluminum Ferrous parts and screws are separated by the integrated magnetic belt (pre-shredding required). Become a copper prospector and produce copper in an eco-friendly way. Because we use our own equipment for processing, our machines are continuously modernized for longevity and technological advancement. Maintenance, spare parts, modifications, and upgrades are handled directly by our trained staff. Granulation Plant S600 - For cables from 1–40 mm - Up to approx. 500 kg/h input capacity – at 50% copper content, 10 kg of input yields 5 kg of 99.7% pure copper granulate, which can be sold at top market prices - Total connected load: 49 kW (without shredder) - Separator tables included - 380 V power connection required - UVV (accident prevention regulation) compliance performed by a certified German company Hedpfx Aewyx Rzofgow - Magnetic belt included (for steel separation) - Uncompromising quality: Only premium Siemens components used in control cabinet construction - The system can be individually configured – we advise you personally. Price on request. All information subject to change. Images/descriptions may differ.

Condition: new, +++++ We manufacture the original +++++ Non-binding offer Copper cable recycling machine 1 unit GA 37-450 granulator cutting unit - completely assembled - incl. motor (37 kW) - with inlet hopper, outlet hopper, and belt guard - 1 set of knives (5 rotor knives and 2 stator knives) - 1 screen - Mounting, system integration into your plant - ex works Hsdpfx Afoflkz Hjgjw Our general terms and conditions apply.

Condition: used, functionality: fully functional, For sale: Motan METRO HES 50 vacuum conveyor for granules, designed for transporting plastic granules, including feeding injection molding machines. The unit is equipped with a stainless steel tank, an integrated suction unit, and an electronic control panel with a digital display. Technical data according to the nameplate: Manufacturer: motan GmbH Hedpfxe Afy Rgj Afgjw Model: METRO HES 50 Power supply: 230 V, single-phase, N and PE Frequency: 50/60 Hz Power consumption: 1.1 kW – 1100 W Current draw: 4.8 A Control voltage: 24 V DC / 230 V AC Protection: 10 A, time-delay Country of manufacture: Germany CE marking Condition: used, visible signs of wear. The set includes the unit with the control panel, cables, and connectors as shown in the pictures. The scope of sale corresponds to the pictures.

Condition: used, functionality: fully functional, For sale: KOCH TECHNIK MIKO vacuum conveyor for transporting plastic granules. The device is designed for the automatic feeding of injection molding machines, extruders, and other processing machines. Hjdpfx Afj Afy Tgsgew Data from the nameplate: * Manufacturer: Werner Koch Maschinentechnik GmbH * Model: MIKO * Serial number: GD1576 * Power supply: 230 V * Date of manufacture: 12-16 * Country of manufacture: Germany Equipment: * Integrated suction unit. * Control panel with digital display and time adjustment. * Transparent tank for observing the material. * Side connection for connecting the transport hose. * Pneumatic solenoid valve. * Lid with snap-on fasteners. * Mounting base. * Power cord with plug. Condition: used, visible signs of wear as shown in the photos.

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Hodpfx Aezhg Eyofgow Weight: approx. 5500 kg Control cabinet brand new (original from THM recycling solutions GmbH) Hydraulic feed pressure device (HNDE), feed hopper

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. Hsdpoq Nw Uqefx Afgew 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Year of construction: 1992, condition: excellent (used), functionality: fully functional, total height: 16,250 mm, outer diameter: 3,550 mm, 4 x 125 m³ Aluminum storage silos with a base ring (plastic granulate silo) Technical data / Dimensions Available quantity: 4 Volume: approx. 125,000 liters Year of manufacture: 1992 Container type: Silo Condition: used Food-grade: no Design: vertical Internal diameter: approx. 3,500 mm External diameter: approx. 3,550 mm Cylindrical height: approx. 15,000 mm Overall height: approx. 16,250 mm Weight: approx. 2,500 kg Specific gravity of the medium: 0.6 t/m³ Operating pressure: non-pressurized Wall thickness, bottom: approx. 5.5 mm Wall thickness, top: approx. 5 mm Wall thickness, shell / cylinder: approx. 3.5 - 5.5 mm Hodpfj Ahfk Rex Afgjw Ground clearance: approx. 900 mm Material / Properties Material, inner shell: Aluminum Internal welds ground smooth Notes: Material AlMg3 Equipment Base design: Foot ring / base ring Quantity: 1 Mounting: fixed Bottom type, top: Conical bottom Bottom type, bottom: Cone Cone angle: 90 degrees Top: 1 x Roof edge railing, height: approx. 1,200 mm 1 x Transition walkway with railing 2 x Crane eye 1 x Manhole DN 500 with hinged cover and safety grille 1 x Vent DN 200 with hood 1 x Flange stub DN 100 (filling) 1 x Flange DN 200 (level measurement) Shell: 1 x Operating room door (approx. 2,000 x 850 mm) 1 x Cable protection conduit ø 60 mm 1 x Filling line DN 100 ending in a Storz coupling 1 x Threaded socket 1 1/2" for empty signal 1 x Threaded socket 1 1/2" for full signal Bottom: The silos end at the bottom in a 90° cone with a flange DN 150 with emergency shut-off slide valve and extraction box. Various pipe penetrations in the area of the base ring. Fittings available The measuring and control technology installed on the silo is included free of charge. However, no guarantee can be given for its perfect functioning.

Year of construction: 1995, condition: used, functionality: fully functional, GETECHA RS 303‑A 60.11 plastic shredder, granulator 11 kW GETECHA RS 303‑A 60.11 type central plastic shredder, granulator with built-in exhaust fan. Manufacturer: GETECHA Type: RS 303‑A 60.11 Date of manufacture: 1995.12 Rotor cutting circle diameter: 340 mm​ Cutting width: 300 mm​ Number of rotating knives: 3 pcs Number of fixed knives: 2 pcs​ Cutting chamber opening: 300x440 mm Main motor power: 11 kW​ Speed: cca 300-400 1/min​ Screen opening (standard): 6–8 mm, round​ Average capacity: 200–360 kg/h Feeding height: 1750 mm Overall dimensions (WxLxH): 1500x2000x2170 mm Hsdpfx Aeyf E N Tofgew Built-in exhaust fan: Manufacturer: Elektror Karl W. Müller GmbH & Co. Voltage: 230/400 V, 50 Hz, three-phase.​ Power: 3.1 kW​ Speed: 2830 rpm Volume flow: 2760 m³/h

Condition: like new (used), Year of construction: 2012, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 01645, type of input current: three-phase, filling weight (max.): 50,000 g, filling weight (min.): 5,000 g, input voltage: 380 V, input frequency: 50 Hz, PAYPER PB-12/CG semi-automatic bagging machine for open-mouth bags, equipped with a digital electronic weighing controller EWC PLUS (EWC+). Hjdpfxs Agv Rms Afgsw Year of manufacture: 2012. Serial number: 01645. Operating hours: 100 h. Condition: like new and fully functional. Inspection while running is possible. Gross weight weighing system: the product is weighed directly in the bag during filling. CG dispensing by gravity using a pneumatic gate, with rapid feed and fine dispensing. The operator places the bag, and the system performs the dispensing and weight control. Suitable for free-flowing products such as cereals, seeds, plastic granules, and granular fertilizers. Equipment included: EWC PLUS controller, frame, conveyor belts, and bag sewing machine. Electrical power supply: 380 V three-phase, 50 Hz. Compressed air consumption: 8 liters per cycle.

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, We are offering this refurbished MG Recycling M_04772 cable granulator, manufactured in 2006. It underwent a major overhaul in 2024. New switchgear control cabinet, new knife sets. Wagner pre-shredder, type WS 15, manufactured in 2007, 15 kW. Feed conveyor, extraction system, and magnetic vibrating table, manufactured in 2021. Output: approximately 150 - 180 kg/hour, depending on the material. Location: Switzerland, 8260 Stein am Rhein. Hodpfx Aoy D Ug Tofgew Asking price: EUR 59,000 (negotiable) If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2022, functionality: fully functional, Complete set of equipment for foam production and converting – HYMA and supplementary equipment Offer description For sale is a comprehensive set of machines and equipment for the production, processing, and converting of foams, including equipment for foaming, granulation, storage, sheeting, processing of cylindrical blocks, and precision cutting. The offer includes machines from renowned manufacturers, including HYMA, as well as auxiliary and installation equipment. The set allows for the implementation of many stages of the technological process – from foaming and material processing to its treatment and cutting. Most of the equipment dates from 2021–2022. The offer also includes an unused steam generator and an unused prepolymer tank. Hedps Agwbaofx Afgjw 1. Equipment for production and material preparation 1.1 HYMA BFH-15 foaming line (2021) Three foaming stations: - two stations for rectangular blocks with dimensions 2080 × 1080 mm and 2080 × 1580 mm, - one station for cylindrical blocks with a diameter of 1400 mm and a maximum height of 2100 mm. Two-screw mixer with a volume of 15 m³. Maximum foam density: 300 kg/m³. 1.2 HYMA GMK-80 granulator (2021) Main motor power: 55 kW. Interchangeable screens: Ø 5, 10, 20 and 25 mm. Output: approx. 1000 kg/h with a 25 mm screen. Conveyor fan: 15 kW. Loading belt conveyor: 1 kW. 1.3 HYMA GMP-75 granulator (2021): Motor power: 75 HP (approx. 55 kW). Interchangeable screens: Ø 5, 10, 20 and 25 mm. Output: approx. 500 kg/h. 1.4 HYMA GFH-330/7 silo (2021) Capacity: 45 m³. Height: 5300 mm. Diameter: 3300 mm. 2. Equipment for sheeting and processing of foam blocks 2.1 HYMA SSB precision sheeting machine for single blocks (2021) Maximum sheeting height: 105 cm. Maximum foam density: 250 kg/m³. HYMA SCH-700 carousel sheeting machine (2021) 2.2 Carousel structure for sheeting foam blocks. Table diameter: 7000 mm. 2.3 HYMA RH drilling machine for cylindrical blocks (2021) Equipment for drilling cylindrical foam blocks. 2.4 HYMA RSS-220 machine for trimming cylindrical blocks (2021) Equipment for trimming and processing cylindrical foam blocks. 3. PTV WJ2116-1Z-Dynamite CNC waterjet cutter (2022) Cutting with a pure water jet, without the addition of abrasive material. "Dry" work tank. Interchangeable tables. Working area: 2100 × 1600 mm. 4. Auxiliary and installation equipment 4.1 CERTUSS Universal 850 TC steam generator (2022) Nominal steam output: approx. 850 kg/h. Thermal power: approx. 558 kW. Includes a water treatment station. Status: unused. 4.2 Prepolymer tank (2022) Nominal capacity: 20 m³. Status: unused. Summary The offer includes 11 items of equipment and production equipment, intended for use in a plant that manufactures and processes foams. The set may be of interest to manufacturers planning to expand existing production capacity, start a new plant, or acquire equipment for subsequent stages of the technological process. Year of equipment production: 2021–2022. Sale: preferably as a complete equipment package. The possibility of purchasing individual equipment requires agreement with the seller. Detailed information regarding the technical condition, availability, location, and terms of sale will be provided to interested buyers.

Year of construction: 2003, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 041-03, Stock No. 2834 TECNOVA mini 60 granulation system, partially overhauled, in working order, ready for demonstration, consisting of: Material feed hopper Stuffing unit TECNOVA single-screw extruder with 60 mm screw – 36 L/D – cylinder, air-cooled 1 degassing unit with vacuum pump Extruder drive 30 kW, screw speed up to 200 rpm Melt filter/screen changer Hot-face granulator, complete with die plate and knife bar Granulate/pellet blower Control cabinet, relay control Hsdpfxoz A Ti Ee Afgjw A test run/sample production with your material can be arranged on short notice; details and schedule upon request. OPTIONALLY, the system can also be equipped with strand granulation; details upon request. Further granulation systems/extruders ready for demonstration are available ex-works Wuppertal.

Year of construction: 2011, operating hours: 2,600 h, condition: used, functionality: fully functional, Cable granulator for processing cable scrap Shredder + WS15 granulator + belts Technical data Throughput depends on material and screen, max. 500 kg/h Operating hours approx. 2600 h Total weight 5.7 t Height 2.75 m Width 7.9 m Depth 10.1 m Power consumption 58 kW at full load Power consumption 42 kW at idle Connection 400 V/550 Hz (fuse rating 125 A + 80 A slow-blow) The system is assembled (demo unit) and can be inspected and demonstrated on site. System overview 1x ICS CONTECT Pre-shredder Carrera-6D.LN WS15 1x ICS CONTECT Radial fan MGTN7 1x ICS CONTECT Shredder 40/60 VGA Hsdpjza Ahcsfx Afgow 1x ICS CONTECT Separation table DK 20.II 1x ICS CONTECT Mobile extraction system U-3000 1x ICS CONTECT Conveyor belt bg GBF 1x Föratec Lifting and tilting device (not installed) 1x Ventilation system with various ducts (not installed) - Spare blades for shredder available

Condition: new, Year of construction: 2026, total height: 2,000 mm, total width: 1,580 mm, total length: 1,600 mm, overall weight: 2,800 kg, rotor diameter: 350 mm, rotor length: 1,600 mm, sieve perforation: 3 mm, number of blades: 18, rotational speed (max.): 400 rpm, warranty duration: 12 months, power: 30 kW (40.79 HP), MIZAR FGR Series - Industrial Fine Granulator for High-Performance Cable Recycling Superior Granulation for Industrial Waste Processing Mizar Recycling Machinery’s FGR Series granulators deliver high-performance results in industrial waste processing and recycling applications. These fine granulators are precision-engineered to efficiently grind and granulate various scrap materials. Featuring superior crushing capacity and fast processing times, the FGR Series effectively handles challenging materials, including copper cables, plastics, and electronic waste. Built with durable materials and wear-resistant blades, the FGR Series ensures long-lasting, reliable performance. Prioritizing energy efficiency, these machines deliver high processing output with low power consumption, significantly reducing your energy costs. KEY ADVANTAGES & FEATURES • High-Performance Crushing: Superior capacity for fast and effective granulation of scrap materials. • Industrial Durability: Constructed with wear-resistant components and high-grade blades for extended service life. Hedpfjzquy Rjx Afgsw • Energy Efficiency: Optimized design provides maximum throughput with minimal energy consumption. • Safety-First Design: Integrated emergency stop systems and safety applications ensure a secure industrial working environment. • Versatile Applications: Ideal for diverse needs ranging from complete recycling lines to scrap waste management facilities. MODEL RANGE & TECHNICAL SPECIFICATIONS • FGR S: Capacity: Up to 400 kg/h | Total Power: 15 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • FGR M: Capacity: Up to 800 kg/h | Total Power: 30 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • FGR L: Capacity: Up to 1,300 kg/h | Total Power: 45 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • FGR XL: Capacity: Up to 2,000 kg/h | Total Power: 75 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to upgrade your industrial recycling capabilities with high-performance granulation? Contact us for a customized quotation, detailed technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Year of construction: 1995, condition: good (used), functionality: fully functional, Bausano complete granulating line, including generator. Output: 350-400 kg/h. Hsdpozcarqefx Afgsw

Condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator -Video: Solution for copper-aluminum radiator recycling line -Condition: unused, without controls -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Quantity: 3 pieces available -Price: per piece -Dimensions: 1160/2335/H1550 mm Hodpfx Afjzbk Tisgsw -Weight: 2100 kg

Condition: new, machine/vehicle number: AMIS Kabelaufbereitung, System consisting of a granulator, sorting table for separating liberated plastic and copper granulate, extraction unit, and control cabinet. Each component is pre-assembled as a transportable element on base plates. Advantages of the compact system: Hedpfsyr Ti Uox Afgsw low overall height, minimal space requirements, component arrangement designed for easy cleaning and maintenance, short installation time, and last but not least, attractive pricing.

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. It features a robust construction, a proven VEM 7.5 kW motor, and a three-phase 400 V power supply. The machine has a large feed hopper, convenient service access, and a control cabinet with an emergency stop button. The installed low-speed three-phase motor provides high shredding power while maintaining stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Performance suitable for medium and large injection molding machines • German quality Hjdpfx Afjz Sk Duegow • Robust frame and blade construction In very good condition, mechanically inspected, and ready for operation.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, DIOSNA V50 Pharma Universal Mixer / Granulator Year of manufacture 2007 | Double-jacketed for heating/cooling | ATEX | Siemens PLC Manufacturer: DIOSNA Dierks & Söhne GmbH Type: V50 Machine No.: 383-001 Year of manufacture: 2007 High-quality DIOSNA V50 Universal Mixer / Granulator in exceptionally good used condition. The product-contacting interior as well as the mixing and chopping tools are in very good condition and appear almost new. SPECIAL FEATURE – DOUBLE JACKET: The mixing container has a double-walled design and enables the heating or cooling of the mixing material. This allows the product to be temperature-controlled during the mixing or granulation process. Hodpfszxq U Hox Afgsw Technical data: - Container volume: 52 l - Usable volume: 46 l - Machine weight: approx. 200 kg - Compressed air supply: 7–10 bar - Voltage supply: 3/PE 400 V / 50 Hz - Fuse rating: 25 A slow-blow Mixing tool: - One-piece 3-blade mixing tool - Runs close to the bottom - Frequency-controlled three-phase geared motor - Power: 4.0 kW - Max. synchronous speed: 495 rpm - Protection class drive: Ex II 2G / IP65 Chopper: - Located on the side in the container housing - One-piece 2-blade tool - Two-stage drive - 1,500 / 3,000 rpm - Power: 1.1 / 1.9 kW - Protection class drive: Ex II 2G/3D / IP66 Equipment: - Double-walled mixing container for heating/cooling - Fully hinged, dust-tight lid - Inspection flap with wiping device - Filter - 1.5" Tri-Clamp connection - Side product outlet with manually operated shut-off piston - Safety monitoring of lid and outlet - Air gap seals for mixer and chopper - Mobile stainless steel frame Control: - Siemens SIMATIC S7-200 PLC - Siemens TP177B touch panel - Manual and automatic operation - Recipe management - Multi-phase process control - Display of mixer speed, power, product temperature and chopper speed - Trend and alarm message display Particularly suitable for intensive mixing and homogenizing of powders, as well as for granulation and agglomeration processes. Original DIOSNA operating manual and control documentation available. Inspection and functional test possible by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Subject to prior sale and errors.

Condition: used, Shredder / Shredders Manufacturer: HERBOLD Type: SMS 45/100-H5-2 Semi-open 5x2 knife rotor, 2 stator knife rows. The machine is equipped with a replaceable third bed knife (deflector) to handle thick-walled materials. Inlet hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing divided in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Hodpfx Afo Afdinsgjw Drive: 75 kW

Year of construction: 2015, condition: good (used), functionality: fully functional, Getecha cutting mill for plastic parts Type: RS 165-A1.5 The cutting mill was used only rarely. It is in used condition visually, but in very good technical condition. Hedpfxjz Epgre Afgew The pictures show some minor surface rust in the grinding chamber. This will wear off during the first use. Serial number: 18711 Year of manufacture: 03/15 Wiring diagram no.: ES18711 Connection: 3 × 400 V / N / PE Frequency: 50 Hz Connected load: 2.5 kVA