Used Copy Turning for sale (8,851)

Condition: new, Year of construction: 2025, Protec Welding Turntable, 5000 kg load capacity Variable speed control, 0.05 - 0.5 RPM Handheld remote control Height: 600 mm Dkodpfx Asid Szcek Aew Diameter: 1500 mm Foot pedal remote control available at an additional cost.

Condition: as good as new (ex-display), Year of construction: 2020, Container rotating device, rotating device Dksdpjigng Nofx Ak Ajw Length and wheelbase are adjustable.

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Compressed-air pressure: 5–7 bar X-axis travel: 1,220 mm Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Dodpfx Akjz N H Eno Aokw Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2007, turning diameter max. 356 mm turning length 705 mm control MSX 850 III MAPPS Mitsubishi greates pass round over bed 923,8 mm Swing dia. over traverse guideway 755 mm standard turning dia. 275 mm max. spindle speed 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bearing diameter 140 mm spindle bore 91 mm max. bar capacity 80 mm chucking diameter 305 mm C-Axis 0,001 ° Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm chucking diameter 210 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Shank diameter 26 mm Drill shank diameter 50 mm Spindle speed - driven tool stations max. 6.000 min -1 turret change time 0,25 sec. x-axis 260 mm z-axis 795 mm b-axis 734 mm feed speeds max. 30.000 mm/min rapid traverse X/Z/B: 30 m/min rapid traverse C: 400 min/-1 Dkedpfxjzb N Uxj Ak Asw total power requirement 39 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC - Turning- and MillingCenter MORI SEIKI - NL 2500 SMC / 700 - Tool-Drive - C-Axis - Subspindle - WITHOUT extraction system

Condition: good (used), Year of construction: 2008, turning length: 1,500 mm, turning diameter: 420 mm, Manufacturer: MAZAK Type: QTN 350 II MY Control: Mazatrol Matrix Nexus Year of Manufacture: 2008 Specifications Metric US Standard Max. Turning Diameter 420 mm X-Axis 257 mm Y-Axis 152 mm Z-Axis 1607 mm Spindle Bore 102 mm Speed 3300 rpm Spindle Power 30 kW Tool Changer 12-Speed Driven Tool Power 4000 rpm Dkodpfx Ajwaikxok Aow Driven Tool Power 7.5 kW Quill Mount 5 Mk Quill Stroke 200 mm Dimensions (Estimate) Length 5000 mm Width 2100 mm Height 2200 mm Weight 8600 kg Please note: The information on this page has been compiled to the best of our knowledge and belief, and where possible, by the manufacturer. This information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you review all important details.

Condition: ready for operation (used), Technical data: Power kW 0.9 Connection 380 V/50 Hz Speed 2,900 rpm Disc dimensions 175/60/51 Weight 117 kg Equipment: Dodoza Dwxjpfx Ak Ajkw  2 ATS tables (spring-mounted table)  2 diamond cup wheels 175x60x51 mm  Column design

Condition: like new (used), Year of construction: 2005, Self-supporting, braked rotating device for jig construction, tool making for assembly, welding, painting, etc. with foot-operated remote control, right/left switchable with warning light when working with speed control on request (additional charge approx. €400) Machine is technically in mint condition, almost unused Weight 1200 kg Dimensions: Height to axle center 1000 mm Dsdohua Dfjpfx Ak Ajkw Mounting plate 400 x 400 mm Hole spacing approx. 240 x 240 mm External dimensions of box section 1000 mm x 850 mm More machines of this type in various sizes are in stock. Load capacity up to 5000 kg New machine price over €20,000

Condition: like new (used), Year of construction: 2006, 2000 kg load capacity Rotating device, self-supporting, with brake for jig and tool construction for assembly, welding, painting, etc. with foot-operated remote control can be switched between right and left with clamping bracket for raising by approx. 1000 mm Machine is in technically new condition, almost unused Dimensions: Dedehwv R Dspfx Ak Askw Height to center of axle 850 mm More machines of this type in various sizes are in stock. Load capacity from 500 kg to 5000 kg.

Condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100–200 mm Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Speed: 0.01–1.1 rpm Tilt angle up to 135° Hand and foot remote control with speed display Dkedefxpfmspfx Ak Aew Very robust

Condition: new, Year of construction: 2024, Welding positioner KT 300 Dksdpfx Asfxz Dvek Aew Load capacity, horizontal: 300 kg, tilted: 150 kg Power consumption: 220 V, 50 Hz Table diameter: 500 mm Hollow shaft diameter: 140 mm Table height: 600 mm, tilted to center: 450 mm Length: 650 mm, width: 650 mm Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 0.3 – 2.5 RPM Includes foot pedal remote control Additional cost: Quick-change chuck Diameter: 400 mm, €550

Condition: like new (used), Year of construction: 2019, Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Handheld remote control with digital display Dual-foot remote control Height: approx. min. 700 mm horizontally, max. 1400 mm Diameter of turntable: 1400 mm Tilting angle: min. 135° Speed: 0.05 to 0.6 RPM Motor power: 3 kW Dksdpfx Akod Ig H Aj Ajw

Condition: new, Year of construction: 2024, Protec Welding Positioner, 20,000 kg load capacity Dkodpfxsid Szko Ak Aow Speed continuously adjustable, 0.05 - 0.35 RPM Handheld remote control Foot-operated remote control, additional cost: €390.00 Height: 700 mm Diameter: 2000 mm

Condition: new, Year of construction: 2024, Container rotating device, 10-ton load capacity Dual synchronous drive Djdpfjifk Rbjx Ak Aokw Adjustable axle distance via threaded adjustment Infinitely variable speed control With foot-operated remote control Diameter from 300 mm to 3500 mm Roller width and diameter: 120 x 270 mm Speed: 200 - 1200 mm/min.

Condition: new, Year of construction: 2025, 1200 kg load capacity welding rotary table, CE certified very robust Dkedpfx Akoifk Rqe Aow Speed continuously adjustable from 0.05 to 0.6 RPM Rotary table diameter 1200 mm Height in horizontal position 950 mm, tilted to center 720 mm with hand-held remote control Length 1.35 m x Width 1.2 m

Condition: new, Year of construction: 2022, 3000 kg load capacity, welding rotary table, very robust Speed infinitely adjustable from 0.05 to 0.7 RPM Rotary table diameter 1400 mm Tilting up to 135° Height in horizontal position 14650 mm, when tilted to the center 1265 mm Length 2.12 m x width 1.4 m Dsdoig T A Hjpfx Ak Askw with remote control

Condition: good (used), 2 units of welded rotary table with a load capacity of 600 kg, very robust Speed continuously adjustable from approximately 0.01 to 2.0 rpm Rotary table diameter 700 mm Tilting up to 135° Height in horizontal position 850 mm, when tilted to the center 630 mm Length 1.4 m x Width 0.8 m With foot and hand remote control Price per unit Dodpfx Aeig T Drjk Aokw

Condition: like new (used), Year of construction: 2000, Welding positioner, Heinrichsglück, 15-ton capacity Condition: like new Complete with accessories: handheld remote control, foot pedal, manual, documentation, electrical diagrams – everything is included Dkjdpfxehcbmpj Ak Aew Dimensions: Diameter of the clamping plate: 2200 mm Height when tilted (to center): 1450 mm Height in horizontal position: 1800 mm Speed: 0.025 to 1.1 RPM Tilting range: 0 to 135° Length: 3400 mm Width: 1800 mm plus 300 mm Weight: 8000 kg

Condition: excellent (used), Welding positioner, 10-ton load capacity Condition: flawless, no defects, extremely robust, virtually indestructible, simple technology allows for easy maintenance. Speed continuously adjustable from 0.01 to 1.0 rpm and speed display with dual-pedal remote control and additional hand-held remote control Diameter of the clamping plate: 1800 mm Height when tilted to the center of the plate: 1650 mm Height in horizontal position: 1850 mm Length: 3300 mm Width: 1700 mm The feet can be shortened upon request. Dksdjh Dm Stepfx Ak Ajw

Condition: excellent (used), As-new tool holders for DECO 20 - DECO 26 3 pieces - TORNOS fixed tool holders for X1Y1; X2Y2; X4Y4 ----- - Turning tool holder for 16x16 mm tools: - Price per holder: €180.00 each fits DECO2000 ø20 & 25mm, DECO 20 and DECO 26 3 with front plate 1 without front plate ----- Dksdjy Apn Aopfx Ak Asw Shipping within Germany €12.00 Shipping within EU €25.00 Additionally, we have 6 spindle reduction sleeves: were used in DECO 26mm inside-ø 8.0mm; ø 12.0mm; ø 21.0mm; 3x ø 26mm outside-ø 30mm, thread M32x1.5, approx. 360mm length flange-ø outside 45mm x 9mm, 4x M4 threaded holes 2x 8 mm keyway Special price for all 6 reductions including shipping: €380.00 We are happy to send photos upon request; for this, we require your email address.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: documentation/manual, foot remote control, Tilting device for containers, welding table, welding turntable, roller stand 3000 kg load capacity with foot-operated remote control Speed infinitely adjustable, 80 to 1600 mm/min. Diameter 40 mm to 1400 mm Roller diameter 200 mm L: 800 x W: 370 x H: 450 Model or color variations possible Dkjdszu I Ipjpfx Ak Aew Note: Height adjustment / support stand dimensions can be customized for an additional charge. Example as shown in the image. Additional charge: €1200.

Condition: good (used), Year of construction: 1993, functionality: fully functional, travel distance X-axis: 212 mm, travel distance Z-axis: 640 mm, total height: 1,730 mm, total length: 4,530 mm, total width: 1,940 mm, overall weight: 5,200 kg, Gildemeister CTX 400, CNC turning machine. The machine is in good, well-maintained condition. Manual included. Machine with EPL2 programming. Dkede Ad H Ukjpfx Ak Aew Travel distances: Z-axis = 640 mm X-axis = 212 mm Max. turning diameter over the bed: 500 mm Data: - Year of manufacture: 1993 - CNC control: EltroPilot L2 - 12 tool stations - Spindle power: 22 kW - Rapid traverse X-axis: 10 m/min - Rapid traverse Z-axis: 15 m/min - Speed range: 25 - 5000 rpm - Chip conveyor GB 25L 38L (discharge height 1100mm, belt width 225mm, feed height 250mm) - Double foot switch - Machine weight (with chip conveyor): approx. 5.15 tons - Dimensions with chip conveyor (W x D x H): 4.53 x 1.94 x 1.73 m The machine can be inspected at any time. The sale is only to business customers and is without guarantee or warranty. You will receive an invoice with the currently applicable VAT. The machine can be loaded.

Condition: used, Year of construction: 2012, functionality: fully functional, Manufacturer: MORI SEIKI CO., LTD. (Japan) Machine model: NLX2500SY Year / Month of manufacture: August 2012 (08 / 2012) Machine weight: 6,360 kg Electrical connection: 3 phases / 50 Hz / 200 V AC Full load current: 144 A Spindle motor current: 177 A Connected power: 50 kVA Dsdpez Hwknefx Ak Askw Main technical specifications Working area & travels: Max. turning diameter: approx. 366 mm Max. turning length: approx. 705 mm Swinging diameter over bed: 920 mm X-axis travel: 260 mm Y-axis travel: ±50 mm (100 mm) Z-axis travel: 795 mm Max. bar diameter: 80 mm Main spindle: Speed range: max. 4,000 rpm Drive power: 18.5 / 15 kW Spindle nose: JIS A2-8 Chuck size: 10 inches Counter spindle: Speed range: max. 6,000 rpm Drive power: 11 / 7.5 kW Chuck size: 6 inches Tool turret: Number of tool stations: 12 stations (powered) Speed of powered tools: max. 10,000 rpm Power of powered tools: 5.5 / 4.2 kW

Condition: new, Year of construction: 2023, Welding turntable, container rotating device, 6000 kg load capacity Digital display with foot-operated remote control Dsdpfx Aksk Adl Ho Aekw Diameter from 180 mm to 3500 mm Drive roller diameter 300 mm Dimensions: Length: 1900 mm x Width 470 mm x Height 390 mm Speed, continuously variable: 200 - 1800 mm/min.

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Equipment: foot remote control, Welding positioner, tank rotating device, 10,000 kg load capacity Synchronous double drive With hand and foot remote control, speed digital display Diameter from 160 mm to 4000 mm Drive roller diameter 300 mm Dkjdpfx Ask Admgok Aow Dimensions: Length: 1900 mm x Width 470 mm x Height 390 mm Speed, continuously variable, 100 - 1000 mm/min Motor AC 380 V

Condition: as good as new (ex-display), Year of construction: 2025, 1200 kg load capacity, welded rotary table, CE certified Very robust Dkjdpjlamr Ejfx Ak Ajw Speed continuously adjustable from 0.05 to 0.7 rpm Rotary table diameter: 1200 mm Tilting angle up to 120° Height in horizontal position: 1.05 m, tilted to center: 880 mm Hand and foot remote control Length: 1.35 m x Width: 1.2 m