Used Ctx 400 for sale (17,746)

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are 80x stacking boxes, II.choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue dimensions: 600x400x120 mm Weight: approx. 2,840 kg Further data / information: Hole pattern: 117 bottom + all 4 side walls staggered round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Kjdpfx Aohm Sltonysdn Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 05x stacking boxes, II.choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue Dimensions: 600x400x120 mm Weight: approx. 2,840 kg Further data / information: Hole pattern: 117 bottom + all 4 side walls staggered round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection Kdsdjhm Slpepfx Anysn our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Included in the delivery: 01x U-shaped collision protection corner, used Material color: orange Total height: approx. 400 mm Total width: approx. 220 mm Total depth: approx. 250 mm Number of mounting holes: 03 pcs. Hole diameter: approx. 15 mm Kedpfew Dy Ivex Anysdn Material thickness: 6 mm Weight per item: 10.87 kg Note: L-shaped brackets are welded to the sides. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transport or shipping of this item is subject to additional costs, which may be quoted separately depending on the delivery location and quantity.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Kjdpjir U Trefx Anyjdn Material color: galvanized Manufacturer: SSI Schäfer Type: PR350/400 total length: approx. 340 mm clear width (shelf distance): approx. 257 mm Hole diameter: approx. 25 x 10 mm profile dim.: approx. U 80 x 50 mm Weight/pc.: approx. 1.52 kg

Condition: as good as new (ex-display), Suitable for shelf rack: Shelving system: SSI Schäfer Type: R 3000 Ksdpfxeib H Dts Anyodn Included in delivery: 01x crash barrier, II. choice Material color: yellow/ black/ galvanized total height: 400 mm total depth: 180 mm clear width: 400 mm Consisting of respectively: 01x CS Sigma profile, II. choice Material color: sendzimir galvanized profile dim.: 300 x 75 x 15 mm Profile type: CS300-2.0 material thickness: 2,0 mm length: 300 mm 02x L - collision protection corners, new material color: yellow/ black according to DIN standard total height: 400 mm leg length: 170 x 170 mm material thickness: 5 mm Weight/piece: 6,10 kg 08x screws: M12 08x nuts: M12 16x washers: M12 The crash barrier is delivered completely pre-assembled.

Condition: good (used), Included in the scope of delivery: 01x open front storage bin, used Manufacturer: Bito External dimensions: 600 x 400 x 170 mm Internal dimensions: 560 x 360 x 167 mm Opening dimension: front half-side open, 275 x 82 mm (W x H) Handle: yes, one-sided, open Colour: blue Weight per unit: 1.59 kg Kodpfx Aow E D Iienysdn General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra charges, which can be requested from us depending on the delivery location and delivery scope.

Condition: good (used), Scope of delivery includes: 01x stacking box, used External dimensions: 400 x 300 x 120 mm Internal dimensions: 360 x 260 x 117 mm Colour: similar to anthracite grey Weight: 0.62 kg per unit Notes: Kdjdpfxew E Ixro Anysn The material is food-safe and made of polypropylene (PP). General information about the item: This item is only offered for collection. Delivery or shipment of this item will incur additional costs, which can be quoted separately depending on the place of delivery and the scope of delivery.

Year of construction: 2011, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 330 mm Kjdpfx Anezda Hwjysdn MAX TURNING LENGTH: 450 mm MAX TURNING DIAMETER: 200 mm BAR CAPACITY: 51 mm SPINDLE: 5000 rpm; 11-16,5 kW X-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 450 mm DRIVEN TURRET HEAD: 12 POS CONTROL UNIT: SIEMENS 810D WEIGHT: 3400 Kg OVERALL DIMENSIONS: 4325 x 2071 x 1742 mm ACCESSORIES: SWARF CONVEYOR

Year of construction: 2012, condition: ready for operation (used), - USED - 3-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 520 mm MAX ROTATING DIAMETER: 500 mm MAX TURNING LENGTH: 335 mm MAX TURNING DIAMETER: 200 mm BAR CAPACITY: 52 mm SPINDLE: 6000 rpm; 15-20 kW; 95-127 Nm X-AXIS TRAVEL: 190 mm Z-AXIS TRAVEL: 335 mm RAPID FEEDS X-Z: 30 m/min DRIVEN TURRET HEAD: 12 ; VDI30 POS; 5000 rpm; 5,4-18 kW CONTROL UNIT: SIEMENS 840D WEIGHT: 3800 Kg OVERALL DIMENSIONS: 4260 x 1710 x 1825 mm ACCESSORIES: FUME EXHAUSTER ; SWARF CONVEYOR ; Kdsdpszda Hkjfx Anysn TOOL SETTER

Condition: used, Year of construction: 2004, operating hours: 9,203 h, functionality: fully functional, machine/vehicle number: 8040939522C, total height: 2,276 mm, total length: 6,205 mm, total width: 2,214 mm, overall weight: 12,000 kg, OTHER MACHINES ARE ALSO AVAILABLE FOR SALE; PLEASE INQUIRE. This offer concerns a high-quality CNC turning machine, type Gildemeister CTX 620 Linear, manufactured in 2004. In 2025, the machine underwent a comprehensive overhaul and technical refurbishment, with various components being replaced. This overhaul, performed by DMG Used Machine, cost 60,000 euros alone. Here is a brief overview of the work carried out during the overhaul: - Restrofitting of a steady rest (SMW) (clamping range 90-350mm) - Replacement of the energy guide chain (Z-axis) - Replacement of all components in the energy guide chains X and Z (cables, hoses, fittings, etc.) - Repair of the tailstock The machine has a 12-position tool turret VDI 50 (Duplomatic), 6 tool holders for driven tools, and a 400 series (KH400) chuck. Control system: Heidenhain. The machine is still used for occasional production. Inspection is possible at any time; the machine is connected to power. OTHER MACHINES ARE ALSO AVAILABLE FOR SALE; PLEASE INQUIRE. Kdsdey I U Ulepfx Anyon

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, rapid traverse Z-axis: 80 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 530i, rotational speed (max.): 12,000 rpm, overall weight: 10,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, fuel: electricity, Equipment: chip conveyor, KONDIA Five 400 5-axis continuous machining center from 2008 with X 850 mm, Y 500 mm, and Z 610 mm travels, HEIDENHAIN TNC 530i control with 5-axis kinematics, workpiece probe, tool gauge, Heidenhain 3-axis linear scales, ATC 40 SK40 tools and 12,000 rpm, 20 Bar CTS tool coolant and chip conveyor Ksdpfx Aeh Elp Ejnysdn

Condition: used, machine/vehicle number: 008602, Max. panel width: 4300 mm Max. panel length: 2200 mm Ksdozcmp Aepfx Anysdn Main saw blade projection: 110 mm No of Grippers: 7

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 425 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 3,000 mm, spindle motor power: 17,000 W, total height: 2,230 mm, total width: 1,800 mm, overall weight: 6,460 kg, controller manufacturer: FAGOR, product length (max.): 5,530 mm, number of axes: 2, This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information. • Max. swing over bed: approx. 400 mm • Max. turning diameter: approx. 400 mm • Distance between centers: 3,000 mm • Bar capacity: approx. 105 mm • Spindle • Main spindle: horizontal • Spindle bore: 105 mm • Spindle nose: A2-type (depending on configuration) • Speed range: variable (CNC-controlled) • High-torque spindle suitable for heavy turning • Range I: 0 - 424 rpm • Range II: 425 - 1700 rpm • Axes • X-axis: cross slide • Z-axis: longitudinal slide • CNC-controlled feed and rapid traverse Kjdpfx Anoybbiujysdn • Tool system • Turret: CNC tool turret • Number of tool stations: depending on configuration • Suitable for internal and external turning • Control system • CNC control: Fanuc / Siemens (depending on configuration) • Full CNC contouring and threading capability • Application • Medium to heavy-duty turning • For shafts, pipes, flanges, and general production parts • Suitable for series and job-shop production • A ball screw was replaced about 3 years ago • Accessories: 1 Lynette and various tool holders Technical Specification Counter Spindle No Driven Tools No

Condition: new, neu Bulgarien 42910 € 819.58 € 400 mm 750 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 4 18-98; 48-265; 144-790; 3 U/Min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 7.5 kW 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: Kjdpfx Anoyq Stioyedn turning length 1.000 mm € 43.630,-

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 37910 € 724.08 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm Kdedpfxjxzuu Ao Anysn 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): turning length 750 mm

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Kdjdpfxeuuz Iis Anysn Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: used, empty load weight: 8,681 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2014, suspension: air, tire size: 385/55 R22.5, Equipment: ABS, | Schmitz refrigerated trailer S3B | TK SLXe 400 refrigeration unit | Double deck without beams - beams available on request | Pallet box | Internal width 2.49 m | Internal height 2.69 m | Schmitz axles with disc brakes | Spare wheel holder, toolbox | Diesel hours: 28,394 h | Subject to error, input mistake, and prior sale. Kdsdpfx Aexdn Hqonyjn

Condition: ready for operation (used), Year of construction: 2021, operating hours: 67 h, clamping force: 1,600 kN, screw diameter: 45 mm, overall weight: 5,900 kg, controller manufacturer: ARBURG, controller model: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) Ksdpex D E Dyofx Anyedn • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information • Screw Diameter: 45 mm • Injection Pressure (Max.): 1580 bar • Shot Weight (Max. g PS): 232 g • Heating Output 9.7 kW | 5 zones • Net Machine Weight: 5900 kg

Year of construction: 1990, condition: used, Used to work with multi-spindle automats Precoat filter oil 2.100 l/min Kodow T Tn Hspfx Anyedn *

Condition: excellent (used), Year of construction: 2012, operating hours: 14,901 h, functionality: fully functional, DMG MORI / GILDEMEISTER CTX beta 1250 TC 4A CNC turning/milling center DMG CTX beta 1250 TC 4A, manufactured in 2012. The machine is equipped with a Siemens 840D / ShopTurn 3G control system and features a main and counter spindle, B-axis, Y-axis, upper milling spindle, and a lower turret. Current operating hours are approximately 14,901 hours, and current spindle hours are approximately 5,000 hours. The machine is still connected to the utilities and can be inspected by appointment. Condition: Exceptionally Good / Superbly Maintained Technical Specifications Process: Turning / Milling / Complete Machining Machine Type: CTX beta 1250 TC 4A Year of Manufacture: 2012 Weight: approx. 16,000 kg Power: 85 kVA Control System: Siemens 840D / ShopTurn 3G Main Spindle / Counter Spindle: 1 x FNC 250 each, up to 5,000 rpm Main Spindle: Hainbuch SpannTop nova Modular 80 HS Internal Clamping Device: Diameter 77 mm GS Partial Internal Clamping Device: Diameter 67 mm x 700 mm Coolant System Pressure: 8 / 20 / 40 / 80 bar Short Bar Loader Magazine: IRCO ILS-RBK 100/16 Upper Milling Spindle: HSK-63A, 24-position disc magazine Kdedpozbg Txefx Anyon Travel Ranges Upper Unit: B-axis +/-110 degrees, Y-axis +/-100 mm, X-axis 450 mm, Z-axis 1,200 mm Lower Turret: VDI 40, 12 tool positions, X-axis 195 mm, Z-axis 1,200 mm Additional: Turret collet chuck SMW SLU-X-2-ZS 8-101 mm Footprint: approx. 9,200 x 2,600 mm including exhaust filter system, chip conveyor, and bar storage Video recordings + extensive photo collection available upon request via WhatsApp.

Condition: used, CFS GEA Koppens WTC 400 Battering Machine This 400 mm wet coating (battering) machine from CFS is ideal for coating meat, fish, game, poultry, fruit, and vegetables. The machine is designed for in-line installation and is particularly suitable for battering convenience food products. The coater is mobile and height-adjustable, allowing for flexible integration into production lines. It features a continuously variable conveyor speed for optimal process control. Excess batter is removed by means of an air knife system, which blows off surplus coating from both the top and bottom sides of the product. The machine is easy to disassemble, enabling quick and efficient cleaning. It is constructed entirely from stainless steel. Specifications: - Working width: 400 mm - Conveyor speed: Continuously variable - Infeed and discharge height: 1050 mm (adjustable) - Equipped with a stainless steel mesh belt Kdjdpfszdqd Sox Anyen - Mesh size: 5 mm - Power supply: 400 V (3-phase + Neutral, 50 Hz) - Power rating: 0.62 kW - Weight: 172 kg - Year of manufacture: 2005 Machine Dimensions (W × D × H): 1350 × 750 × 1750 mm

Condition: new, With digital technology, the NEOPULSE 400 CW is a three-phase pulsed MIG / MAG generator for heavy industry. Mobile and equipped with a cooling unit and a high-performance unwinding system, the NEOPULSE 400 CW is ideal for tackling the most demanding applications. Intuitive and functional, its digital interface makes it possible to act on the welding parameters with ease. MULTIPROCESS WELDING MIG/MAG : Ksdpomxkggsfx Anyedn - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - Flux-cored wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile and cellulosic electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Gouging (up to Ø 6.5 mm).

Year of construction: 2000, condition: good (used), LIVNICA KIKINDA tangential grinding machine Complete with magnetic table Longitudinal stroke mm 1000 Transverse stroke mm 400 Motor power Kw 12 Weight Kg 3800 Kdsdpfxoq Aaw Hj Anyen

Condition: used, Year of construction: 2007, cutting diameter 400 mm saw band length 4715 mm cutting width 1,3 mm main drive motor 7,5 kW Roller conveyor length 4000 mm Roller conveyor width 700 mm roll diameter - bore 150 mm total power requirement 14 KVA weight of the machine ca. 7,5 t Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Kdodpfezfqh Hex Anyen About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, warranty duration: 6 months, DGUV certified until: 07/2027, type of input current: AC, total length: 700 mm, total width: 800 mm, total height: 1,050 mm, control voltage: 24 V, input frequency: 50 Hz, space requirement height: 1,050 mm, space requirement length: 700 mm, space requirement width: 800 mm, Treif Primus 400 bread slicing machine Treif Primus 400 – “The premium model” Rotary knife slicing machine Stainless steel design Knives newly sharpened and coated Kdodpfsxp Uhfex Anyjn Best slicing performance for your bread Operation via easy one rotary control Dimensions: 800 x 700 x 1050 mm (W x D x H) Robust technology 230V connection, ready for plug-in Used machine & SAB inspected With warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Maintenance contract Replacement knives Service package Delivery service Instruction & commissioning Visit our large exhibition of bread slicing machines!