Used Cutter Machine for sale (64,151)

Condition: used, Plasma cutting unit Harris Type Plasma Cutting H 35 A Machine No. Year of manufacture approx. 1994 Output 35 Amp. Cutting capacity approx. 4 mm Torch package length approx. 7 meters Compressed air connection approx. 6 bar - with pressure reducer Power supply 380 Volt, 50 Hz Space requirement (L x W x H): 550 x 400 x 960 mm Crodpexciumefx Ackoc Weight approx. 50 kg Good condition

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Dimensions: 82x85x156 cm Installed power: max 2 kVA Customs classification: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm WORKPIECE SPINDLE UNIT Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Crjdpsw T S Sqsfx Ackec Indexing plate teeth count: 120 Angular vernier reading: 20' Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Micrometric feed per handwheel turn: 0.1 mm Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Micrometer travel: 25 mm Reading precision: 0.01 mm Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

Condition: used, Year of construction: 1982, x-travel 0 mm y-travel 0 mm table length 600 mm table width 400 mm Crodpst Hwr Uofx Ackjc total power requirement 2 kW weight of the machine ca. 1500 kg

Condition: used, Year of construction: 1977, max. grinding diameter 400 mm grinding width 0 mm max. module min. module total power requirement 3 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Crsdpfxjt Hwnve Ackjc Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features * Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunately the machine does not have many accessories. It would therefore be a good investment as a second machine if you already have suitable accessories available.

Condition: used, Year of construction: 1994, workpiece diameter 110 mm grinding length 410 mm clamping length 20 mm total power requirement 0,25 kW weight of the machine ca. 500 kg Cedpjt Hw Nmjfx Ackorc dimensions of the machine ca. m Profile Tool Grinder for Chamfer Angles, accessories

Condition: good (used), Kraus and Reichert Kuris KVS700 Straight Knife Fabric Cutter Condition: Used and tested for functionality. Codpfx Aopitkgjckerc _RD 6 kg Find more textile machines - new and used - in our shop! International shipping costs on request!

Condition: new, IDEAL Krug & Priester 1080 Lever Cutter Material blade sharpening angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets, and other materials Resharpenable blade set made of Solingen steel Complete with solid base and foot press Fold-out side table, right Side fence with scale in mm and inches Infinitely adjustable back fence with locking screw Front fence with locking screw and narrow cutting attachment Scale knob for precise front fence adjustment Printed DIN format markings A3 to A6 Fixed, transparent blade guard made of shatterproof plastic with blade locking device Extra stable die-cast aluminum blade bearing and double-bearing blade axle for precise cuts Extremely robust metal construction GS certified Brand quality Made in Germany Cutting length: 800 mm Cutting capacity: approx. 20 sheets (70 g/m² paper) - 4 mm clearance Crjdpfx Ajx R Scxockjc Table size (W x D): 605 x 800 mm Dimensions (H x W x D): 1215 x 670 x 1080 mm Width with side table extended: 890 mm Weight: 55 kg Condition: New More cutting machines in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: Parmel_042025PA, type of input current: three-phase, total width: 2,510 mm, total length: 5,770 mm, input voltage: 400 V, feed length X-axis: 2,500 mm, working width: 1,600 mm, repeat accuracy: 0.01 mm, feed rate Y-axis: 1,500 m/min, cutting width (max.): 1,600 mm, cutting height (max.): 50 mm, Single Ply Cutter – Fabric & Textile Cutting Machine Our single ply cutters are the ideal solution for the precise cutting of textiles, leather, technical fabrics, and composite materials. With state-of-the-art CNC technology, they guarantee: • Maximum cutting precision for samples, prototypes, and series production • Flexibility for different materials and formats • Efficiency thanks to short setup times and automated processes Whether in the fashion, furniture, or automotive industry – our fabric & textile cutting machines deliver perfect results with maximum productivity. Model SC 1625 • Single-ply cutting up to 25 mm height • Working area (W × L): 1600 mm × 2500 mm • 2 cutting heads, double toolhead, needle punch kit, and plotting pen holder • Tool package: ERT, EOT (electric rotary knife, oscillating knife, punching module) • KIS (Knife Initialization System) • JWCS CAD/CAM Control Software • Vacuum pump • Air compressor Cedow N Rz Aepfx Acksrc • Passive roll feeder for non-elastic fabric • Parmel Cutting Software • 12-month warranty We provide installation, training, spare parts, consumables, and guarantee smooth operation both during and after the warranty period.

Condition: new, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: Parmel_042025PA, type of input current: three-phase, total width: 2,510 mm, total length: 5,770 mm, input voltage: 400 V, feed length X-axis: 2,500 mm, working width: 1,600 mm, total height: 50 mm, repeat accuracy: 0.01 mm, cutting width (max.): 1,600 mm, cutting height (max.): 50 mm, compressed air connection: 4 bar, Single Ply Cutter – Fabric & Textile Cutting Machine Our single ply cutters are the ideal solution for the precise cutting of textiles, leather, technical fabrics, and composite materials. Crsdpeyh R Htofx Ackjc With state-of-the-art CNC technology, they guarantee: • Maximum cutting precision for samples, prototypes, and series production • Flexibility for different materials and formats • Efficiency thanks to short setup times and automated processes Whether in the fashion, furniture, or automotive industry – our fabric & textile cutting machines deliver perfect results with maximum productivity. Model SC 1625 • Single-ply cutting up to 25 mm height • Working area (W × L): 1600 mm × 2500 mm • 2 cutting heads, double toolhead, needle punch kit, and plotting pen holder • Tool package: ERT, EOT, VPT (electric rotary knife, oscillating knife, punching module) • KIS (Knife Initialization System) • JWCS CAD/CAM Control Software • Vacuum pump • Air compressor • Passive roll feeder for non-elastic fabric • Parmel Cutting Software • 12-month warranty We provide installation, training, spare parts, consumables, and guarantee smooth operation both during and after the warranty period.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding wheel diameter: 200 mm, workpiece length (max.): 200 mm, TECHNICAL DETAILS Crjdpfoya Dy Hex Ackec Grinding wheel diameter: 100–200 mm Maximum workpiece length: 200 mm MACHINE DETAILS Control: Siemens 840D or equivalent CNC axes: 3–5 axes Drive power: 5–10 kW Coolant tank: 100–200 litres EQUIPMENT Coolant filtration system Universal applicability for different tool types and geometries High flexibility through CNC programming and adaptable clamping devices Process reliability thanks to integrated cooling and filtration system Easy maintenance due to modular design and central supply units

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter Crjdpfoy Tu Rwsx Ackoc The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases Csdpfxeyz Adno Ackorc 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg EQUIPMENT RNA vibratory feeder (diameter: 800 mm) Cjdpoza Tcqefx Acksrc External reference: 34

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 23/06/2026 and 26/06/2026! Cedoza S Irjpfx Acksrc MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg EQUIPMENT RNA Vibratory Feeder (diameter: approx. 800 mm) External reference: 33

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 660 x 450 x 500mm, Table size 720mm x 420mm, table load 500kgs, spindle speed 12,000rpm, spindle motor power 28Hp, Crodszbituopfx Ackjc Siemens 828D Control with Shopmill, rapid feed XYZ axis 24m/min, Spindle taper BT40, 12 station ATC

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111254, MACHINE SPECIFICATION Cjdpoyrrx Ujfx Ackerc Table size 660mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 20 tools Approximate weight 3220Kg MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control Swarf auger Filtermist extraction system 10 off assorted BT40 toolholders Programmable coolant nozzle Automatic lubrication system Lighting Enclosed guarding

Condition: excellent (used), XYZ SLX 555 x 3M CNC Lathe (2016) Stock Number 2851 Protrak SLX CNC Swing over bed 560mm Swing in gap 935mm Credpfxsx Hp I Ro Ackjc Swing over cross slides 350mm Distance between centres 3000mm Spindle bore 104mm Additional Features Protrack SLX Control Drilling Attachment 4 Way Toolpost 3 Jaw Chuck 3 Point Steady

Condition: excellent (used), XYZ 1500 Turret Milling Machine (Ex College) 2 Axis Newhall DRO Spindle Taper R8 Spindle speeds to 500 – 3500rpm Table Size 1069 x 228mm X – 610mm Cjdpfxey N Ak Ro Acksrc Y – 305mm Knee Travel: Z – 362mm 415V Electrics Year 2014 Serial Number 103080 Stock Number 2867

Condition: used, Year of construction: 2021, operating hours: 247 h, functionality: fully functional, machine/vehicle number: Tecto DC2 BS, input voltage: 400 V, total width: 1,170 mm, total length: 3,750 mm, total height: 1,230 mm, temperature: 2 °C, type of input current: three-phase, cooling capacity: 3,845 kW (5,227.74 HP), ambient temperature (min.): 4 °C, control cabinet height: 1,230 mm, control cabinet length: 3,750 mm, control cabinet width: 1,170 mm, overall weight: 300 kg, Refrigerated counter on 2 levels for displaying refrigerated goods. The bottom level is for wrapped accessories. The top level is for dispalying fresh seafood / meat / cheese / deli. Excellent Italian quality. There are fridge in both levels. Model: Tecto DC2 BS. Cooling requirement: 3845W (for 24/7 use) Color code: RAL7035 / RAL9006 Lengt: 3,75 meter Depth: 1,17 meter Hight: 1 meter 23,5 cm Cooling maschine: Split R452a Crodpfxey T Iime Ackoc Need electrician, plumber and refrigeration technician to install it.

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. Codpfx Ajymn Hwjcksrc You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Year of construction: 2021, condition: good (used), 1 x Box Taping Machine Crodpjy T Nbdofx Ackoc Model: AS523S Year: 2021

Condition: used, Industrial Tempering / Heat Treatment Oven – Lister Machine Tools Heavy duty industrial tempering and heat treatment oven by Lister Machine Tools Ltd. Ideal for engineering workshops, toolmaking, heat treatment, metal hardening, tempering and industrial heating applications. Fitted with digital temperature controller and insulated chamber with front loading access door. Suitable for precision heating and workshop production use. Features: Industrial electric tempering oven Digital temperature control Insulated heat chamber Front loading design Heavy duty industrial construction Mounted on steel stand Suitable for tooling and heat treatment work Condition: Used workshop condition with cosmetic wear from industrial use. Complete and operational. Ideal for engineering shops, fabrication workshops, blacksmithing and toolroom environments. Csdpey R D Tiofx Acksrc Loading available on site. Viewing welcome. Transport can be arranged. Open to sensible offers.

Condition: used, Industrial Sheet Metal Beading / Swaging Machine (Jenny Machine) Heavy duty manual sheet metal swaging and beading machine in solid original condition. Ideal for fabrication shops, restoration work, ducting, panel making. Fitted with adjustable rollers and manual feed controls. Strong cast iron industrial construction mounted on original pedestal base. Perfect for forming beads, swages, strengthening ribs and edging work in sheet metal. Features: Manual hand operated machine Adjustable forming rollers Crodpfx Aoy R Dqujckjc Heavy cast iron construction Original pedestal stand Industrial workshop machine Suitable for steel, aluminium and light gauge sheet metal Condition: Used industrial condition with age-related wear and surface rust. Mechanically complete and turns freely. Ideal restoration or workshop machine. Loading available. Viewing welcome. Open to sensible offers.

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t Crjdpey Nd Siefx Acksc dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. Cedpsy Sd Tljfx Ackorc The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.