Used Dare Force for sale (6,604)

Condition: excellent (used), Year of construction: 2012, Arburg 680CB 400-170 / Vertical injection molding machine, tie-bar-less / Very good technical condition. Year of manufacture: 2012 Injection unit: Screw diameter: 25 mm injection weight: 54 g Dkjdpjz Iquvofx Ap Isu Injection pressure: 2500 bar Metering volume: 59 ccm Clamping unit : clamping force: 40 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Very good technical condition Vertical injection molding machine, tie-bar-less Euromap 67 Robot interface Air valve x 3 Hydraulic core puller x 3 Hot runner control x 12 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorized service Arburg Original Arburg mold crane Dimensions: Weight: 6500 kg Length/width/height: 1.97x1.69x3.40 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: like new (used), Year of construction: 2019, clamping force: 500 kN, Equipment: documentation/manual, _ENGEL – Injection Moulding Machine Technical Data_ Serial number: 232665 Dodjz Iyldspfx Ap Ijku Model: E‑VICTORY _Plasticising Unit 1_ • Screw diameter: 18 mm • Listed diameter options: 15 / 18 / 20 mm; 18 mm is installed • Screw stroke: 80 mm • Maximum injection volume: 20 cm³ • Screw speed: 450 rpm • Screw torque: 75 Nm • Plasticising rate, 3-zone screw: 4.2 g/s _Injection Unit 1_ • Version: Standard • Injection rate: 83.97 cm³/s • Specific injection pressure, regenerative mode: 2,400 bar _Nozzle 1_ • Nozzle stroke: 210 mm • Nozzle contact force: 40.6 kN _Material Cylinder 1_ • Screw L/D ratio: 24 • Heating zones, including nozzle: 4 • Heating power: 5.1 kW • Note: maximum available equipment _Clamping Unit_ • Clamping force: 500 kN (approximately 50 tonnes) • Opening stroke + cylinder tolerance: 408 mm • Maximum distance between platens: 600 mm • Minimum mould height: 200 mm • Platen dimensions, horizontal × vertical: 500 × 450 mm • Drop-out chute width: 400 mm • Maximum mould weight on moving platen: 300 kg • Maximum mould weight on stationary platen: 300 kg • Maximum total mould weight: 600 kg • Dry-cycle stroke according to Euromap 6: 150 mm • Dry-cycle time according to Euromap 6: 1.60 s Mould weight notes: 1. Mould overhang according to mounting platens. 2. Less the weight of any rotary table. _Ejector 1_ • Ejector stroke: 100 mm • Ejector force: 39.8 kN _Drive Unit_ • Oil reservoir capacity – injection unit, main tank: 135 l • Oil reservoir capacity – clamping unit, auxiliary tank: 0 l _Machine Basics_ • Total weight without oil: 4.0 tonnes • Total connected power: 65.0 kW Transcription note: the small footnotes below the plasticising section specify reference materials and test conditions. They are not fully legible in this photo.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 45,992 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 28 mm, injection pressure: 1,069 bar, injection weight: 9 g, total length: 2,050 mm, total width: 1,030 mm, total height: 2,780 mm, overall weight: 900 kg, warranty duration: 6 months, Equipment: documentation/manual, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this Boy 22AVV injection moulding machine. Dsdpfx Asywx Hqsp Ieku Vertical clamp with vertical injection is ideally suited for insert moulding, the operator can load parts for over moulding easily. The pneumatic gate ensures safe operation. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, input current: 380 A, type of input current: three-phase, overall weight: 8,350 kg, total length: 3,980 mm, total width: 1,820 mm, total height: 2,880 mm, pressing force: 100 t, clearance between the columns: 2,700 mm, oil tank capacity: 200 l, operating speed: 180 mm/s, reverse speed: 180 mm/s, throat depth: 450 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, The TPM8 is designed for maximum productivity and ease of operation. With its robust and rigid frame construction and automatic job preparation, you can achieve precise results quickly. In addition, customizable tooling kits enable a fast start-up, ensuring you get the best value for your investment. * Best price-performance ratio * Easy operation * JFY BEND - Offline programming * Maximum safety Dsdpfjz Eq Nzsx Ap Ioku * Application and local service * Bending tools 2D - Graphic programming 3D - Graphic programming 3D - Bending simulation !!!Individual machine configuration possible according to customer requirements, as well as additional equipment!!! Machine pressing force from 60t to 320t possible. We are always available to provide detailed quotes, technical specifications, and delivery terms.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 41,610 h, clamping force: 4,118 kN, screw diameter: 70 mm, Hydraulic injection moulding machine manufactured in 2015. This DEMAG D 420 features a clamping force of 420 t and an injection weight of 1100 g. It includes a handling system with impressive working strokes of Z=2500 mm, Y=1600 mm, and X=900 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 420 machine we have for sale. Contact us for further details regarding this machine. - Control Unit: NC 5- Injection Weight: 1,100 g- Core Pulls (Hydraulic): 4- Hydraulic Cascades: 4- Hot Runner Zones: 40- Handling System / Robot: Wittmann DR 832 0989 (YOM 2015)- Robot Linear Axes: Z=2500 mm (Horizontal), Y=1600 mm (Vertical), X=900 mm (Demolding)- Robot Servo Wrist Axes: C-Axis servo 180°, B-Axis servo 270° Dedez E Hhyepfx Ap Isku

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Dkjdsu Icmhspfx Ap Ieu Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: used, Technical details: punching cross section in mm²: 45 kp/mm² table-size: 120x100 mm throat: 80 mm weight of the machine ca.: 15 kg Dksdpou Icw Hjfx Ap Iou space requirements of the machine approx.: 0,3x0,2x0,95 m Punching Press *

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h Dkodpfx Aou Idnmop Iou tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. *

Condition: used, Year of construction: 1991, Technical details: pressure: 200 t chamfer lenght: 4100 mm control: - distance between columns: 3200 mm stroke max.: 250 mm total power requirement: 22 kW operating pressure: max. 280 bar table width: 200 mm stroke speed - idle stroke upwards: 100 mm/s stroke speed - idle stroke downwards: 100 mm/s weight of the machine ca.: 18.000 t dimensions of machine: 5,0 x 2,7 x 3,0 m Dkodpfey Alw Hsx Ap Isu

Condition: used, Technical details: Dsdpou Nurfefx Ap Ijku diameter of piston: Ø 160 mm weight: 200 kg dimensions: 0,6 x Ø 0,3 m draw cushion for a WMW Erfurt Press type PYE 160 blankholder force 50Mp ejector force 4 Mp stroke up to 160mm flange diameter 280mm piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diameter 118mm hydraulic connection 2x 1 inch *

Condition: used, Year of construction: 1986, Technical details: weight: 7,5 kg number of strokes: 2000 Hub / Min Torque: 15 kp dimensions L x W x H: 170x160x130 mm air pressure clamping unit application area operation of vise clamping consists: air pressure motor, impuls mechanism and a control mechanism air pressure supply necessary averaged operation pressure 0,4- 0,6 MPa air pressure consumption 1,1m³/min with 0,5 MPa tightening force: 80kN accessories: copy of documentation available 13 pcs available Dksdpou Nkk Rofx Ap Iou i.D. *

Year of construction: 2002, condition: used, Technical details: stroke height: 8080 mm work height max.: 10080 mm lifting capacity: 450 kg axle distance: 1,86 m speed: 35 km/h stroke speed: 51 sec. control voltage: 24 V - 250 A V / A operating pressure: 220 bar machine weight approx.: 2330 kg dimensions LxWxH: 2,65 x 1,20 x 2,3 m LIFTING JACK SYSTEM - without battery on Sale, without (Accident Prevention Regulation), upgrade on customer side possible Work platform - scissor lift table Hydraulic mobile elevating work platform last inspection according to DGUV 308-002 from 06/2023 Dksdpeva A D Tjfx Ap Iju Load capacity 450 kg, 3 persons included Manual lateral force 40 daN Floor height 8.14 m Lifting height, retracted incl. railing: 2.26 m Lifting height, retracted platform: 1.14 m Lifting time 51 sec. Lowering time 42 sec. Platform dimensions 2.3 x 1.2 m 4x hard rubber tires Ø 380 x 130 mm, 2x steered and 2x driven wheels *

Condition: excellent (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, CNC turning center Doosan Puma 700 XLY II Turning length: 5,050 mm Dodpfezlcyusx Ap Isku Turning diameter: 700 mm with driven tools and Y-axis Basic equipment: - CNC control Fanuc 0i with Manual Guide i - 45" inclined bed in tubular construction - Main spindle with 4 bearings. Spindle bearing accuracy class P 4 - Lifetime lubrication - Internal clamping device hydraulically actuated with internal clamping cylinder complete with safety device, coolant collection tray, stroke control and draw rod - Automatic central lubrication - Tailstock programmable - Flat bed guides hardened and counter surface coated with Rulon 142 - Coolant system with 7 bar delivery pressure - Guide rail cover Z-axis - Full enclosure - Watertight work area lighting - Integrated alignment screws and mounting plates Including Doosan options: - Tailstock programmable (towed by the turret) - Oil skimmer - Coolant system with 14 bar delivery pressure - Electronic tool breakage monitoring - Automatic tool measuring arm - 3-color warning light - Clamping force monitoring - Additional handwheel - NC option Arbitrary Speed Threading - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; straight ER50 - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; angled ER50 - Preparation for programmable hydraulic steady rest (includes complete basic body, connected to open/close the steady rest via M-function and the basic body can be automatically positioned in the Z-direction, towed by the cross slide without the steady rest) Schunk ROTA NC 630-180 2520-Sv90" Chuck diameter 630 mm Manufacturer Schunk with involute gearing 90" incl. flange and draw rod adapter Steady rest RX6-ZSW-100520 50-SCUW-95 self-centering, hydraulic steady rest, sealed housing (proofline), measuring system for clamping range monitoring (SCU-V), integrated flushing channels / chip protection, flushing nozzles, extra compact design, integrated cylinder with pressure converter. Clamping range from 100mm to 520mm Brinkmann pressure boosting pump 30 bar incl. 50p Mahle filter approx. 30 bar, can be switched on via M-function incl. cartridge filter Coolant gun with its own pump Coolant gun for cleaning the work area when the door is open In automatic operation without function Hinged belt chip conveyor, discharge on the right, inclination angle 50 degrees, discharge height 1150 mm Chip cart Type SKM750; 0.75m3 volume; 1000kg load capacity; with rollers and forklift pockets

Year of construction: 1981, condition: like new (used), Second hand hydraulic (triple acting) deep drawing press LAUFFER 400t. The press is already dismantled and in excellent condition as it has been little used. Technical data: Year of manufacture: 1981 Pressing capacity in t: 400 Height above floor in mm: 5940 Stroke in mm: 800 Table size (lxb) in mm: 1600 x 1300 Ram size (lxb) in mm: 1500 x 1300 Daylight in mm: 850 Upper ejector stroke in mm: 160 Upper ejector force in t: 6,3 Lower ejector stroke in mm: 200 Lower ejector force in t: 12 Total power consumption in kW: 150 Overall size (lxbxh) in mm: 3550 x 1200 x 5940 Total weight in kg: 50000 Djdpfx Apod Ntd Ds Ijku

Condition: used, Year of construction: 2013, x-travel 1.135 mm y-travel 1.050 mm z-travel 750 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 14.000 min/-1 power capacity - main spindel 19 kW max. Torque 100 Nm tool taper HSK-A 63 table surface area 1.400 x 1.050 mm max. table load 2.500 kg max. workpiece sizes 1.400 x 1.240 mm max. workpiece height 750 mm number of toolpositions 30 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 365 / 395 mm max. tool weight 8,0 kg change-time chip to chip 6,1 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min Accelaration 6 m/s² Dkedpfx Apoyztyao Iou Feed force ( X / Y / Z ) 14 / 20 / 14 kN total power requirement 44 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 6,0 x 5,0 x 3,3 m CNC - MachiningCenter Vertical DMG MORI SEIKI - DMU 105 monoBLOCK - Spindle hours: approx. 9,518 h - Production package: (Chip conveyor, 600 l coolant system, paper belt filter, internal coolant supply 40 bar / 23 l/min through spindle center) - Air Clear: Air curtain for viewing window

Condition: used, mileage: 33,203 km, power: 96 kW (130.52 HP), first registration: 01/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1029. RG12091 ----EQUIPMENT * Load compartment protection package 1 - "Easy Clean" load compartment floor - Wheel arch lining - High side wall lining * 1 battery * Transmission: 6-speed manual * Anti-lock braking system with electronic brake-force distribution (EBD) incl. - Electronic Stability Program (ESP) with traction control (TCS) - Hill start assist - Side wind assist - Safety brake assist - Rollover protection - Emergency brake assist incl. emergency brake light * Airbag, driver side * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * Battery: Battery runtime, battery runtime programming to 10 min * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, medium * Headliner in driver's cab * Double-wing rear door with 180° opening angle (without window) * Rev counter * Third brake light * Power windows front, electric - with quick-down/-up function for driver's side Djdpfx Apoz Hg Suj Ioku * Parking brake, electronic * Ford Easy Fuel - Comfort fuel filler cap and misfuelling protection * FordPass Connect - incl. live traffic information and WLAN hotspot 5GModern - Information on the current status or location of the vehicle as well as control of selected vehicle functions via the smartphone with the FordPass App - Current traffic information in real time (in conjunction with navigation system) - WLAN hotspot (up to 5G/LTE, for up to 10 mobile devices) - Further information on FordPass Connect can be found at / * Headlamps: Halogen headlamps with daytime running lights * Glove compartment with locking lid * Interior lighting with delay function with reading lights at the front * Air conditioning * Fuel tank 70 liters * Paint: Solid color * Load compartment lighting * Emergency assist * Technology package 2 - Ford Audio System 2 - Fog lights - LED downlight - Pre-Collision Assist, radar-based - Lane Keeping Assist - Traffic sign recognition system - Park pilot system rear - Park pilot system front - Cruise control * Particle filter: Diesel particulate filter * Tyre pressure monitoring system * Sliding door: Sliding door, right * Mud flaps rear * Side protection strips * Power steering * Seat belts - Seat belt pretensioners and force limiters front * Seat package 18A - Driver's seat, 4-way adjustable (fore/aft, backrest, tilt, height) - Front passenger double seat, 2-way adjustable (fore/aft, backrest) - Headrests, height-adjustable - Tray on the front passenger double seat (fold-out) - Internal armrest for driver - Lumbar support for driver - Seat cover: Fabric * Start-Stop system * Front bumper * Partition (plastic) at the height of the B-pillar * Rear bumper, with integrated step * Recirculation system * Lashing eyes * Immobilizer * Heat-reflecting glazing, lightly tinted * Central locking with remote control * Overhead storage compartment front ... and more ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly take your vehicle in part exchange. Financing / Leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: ready for operation (used), Year of construction: 2021, operating hours: 12,000 h, clamping force: 3,000 kN, screw diameter: 50 mm, injection weight: 375 g, total width: 2,100 mm, total height: 2,500 mm, overall weight: 14,600 kg, product length (max.): 7,000 mm, Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details. Dsdpoyrgq Ejfx Ap Ijku • Max. mould opening stroke: 600 mm • Min./Max. mould installation height: 280 / 650 mm • Max. platen distance: 1250 mm • Tie bar spacing (H x V): 730 x 730 mm • Min. mould size: 470 x 470 mm • Platen size (H x V): 1040 x 1040 mm • Ejector stroke: 160 mm • Ejector force: 68.6 kN • Injection unit size: Euromap 120 • Screw L/D ratio: 20 • Theoretical shot volume: 412 cm³ • Injection pressure: 2000 bar • Holding pressure: 1600 bar • Injection speed: 160 mm/s • Injection rate (PS): 274 g/s • Screw speed: 320 rpm • Plasticizing rate: 46 g/s • Nozzle contact force: 85 kN • Barrel heating power: 20.2 kW • Connected load: 36 kW / 60 A • Hydraulic pressure: 175 bar • Hydraulic flow rate: 90 l/min • Oil tank capacity: 135 l • Material hopper volume: 50 l • Control system: Sigmatek with 15" colour touch screen • USB interfaces: 3 • Robot interface: Euromap 67 • Robot adapter: Euromap 18 • Form data memory: up to 200 moulds • Production data recording: up to 100000 cycles • Statistical process control (SPC) system • Central lubrication system • Automatic mould height adjustment • Compact 5-point toggle clamping system • Hydraulic ejector system with vibration function • Parallel mould opening and ejector movement • Up to 3 hydraulic core pulls • Cooling water distributor system • PID temperature control system • Ceramic heater bands with thermocouples • Automatic purge function • Energy-saving cylinder insulation • Adjustable machine feet • Installation tools included • Hours: ca. 12,000

Condition: excellent (used), Year of construction: 2017, operating hours: 17,809 h, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, mold height (min.): 250 mm, plate length: 650 mm, plate height: 650 mm, total length: 4,500 mm, total width: 1,700 mm, overall weight: 4,850 kg, Arburg 470C-1500-400 injection molding machine with Multilift robot, safety cage, 2 conveyor belts and sorting flap (262) SERVO MOTOR PUMP DRIVE = LOWER ENERGY CONSUMPTION AND MORE ECONOMICAL OPERATION Category: INJECTION MACHINES Brand: Arburg Number: 262 Availability: in stock Year of production: 2017 Producer: Arburg Injection molding machine condition: Djdpfx Ajz Hm N Hop Ieku used Screw diameter [mm]: 40 Injection weight [g]: 184 Injection pressure [bar]: 2000 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Tongue: English, German Installed power [kW]: 38 kW (pump drive on 18.5kW servo motor) Working hours [h]: 17809 Weight [kg]: 4850 Dimensions [mm]: 4500×1700 Feed hopper: Yes Core string: 2x Robot socket: euros 67 Air valve: 1x Control of heating for molds: 6x

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Dkodpfx Apjzi Hcho Iou Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Dedpfx Ashfwqzjp Isku Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: ready for operation (used), Year of construction: 2007, operating hours: 91,250 h, clamping force: 13,000 kN, screw diameter: 110 mm, injection weight: 5,200 g, Hydraulic injection moulding machine manufactured in 2007. This DEMAG D 1300 features a clamping force of 1300 t and an injection weight of 5200 g. It includes a handling system with a Wittmann DR 853 robot, offering impressive Z, Y, and X-axis strokes of 3500 mm, 2500 mm, and 1600 mm respectively. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 1300 machine we have for sale. Contact us for further details. Dkodpfx Asz E Hh Hjp Ieu - Control Brand / Model: Demag NC4- Hydraulic Core Pulls: 4- Hydraulic Cascades: 12- Hot Runner Control Zones: 32- Handling System / Robot: Wittmann DR 853 227 (YOM 2014)- Robot Z-Axis Stroke: 3500 mm- Robot Y-Axis Stroke: 2500 mm- Robot X-Axis Stroke: 1600 mm- Robot C-Axis: 90°- Robot B-Axis: Servo 270°- General Condition: Very good overall condition, annual maintenance performed, currently under power / in series production

Condition: used, mileage: 32,951 km, power: 125 kW (169.95 HP), first registration: 05/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1035. PD82690 ----EQUIPMENT---- * Airbag (passenger side) * Exterior mirrors, electrically adjustable, heated and foldable – with integrated indicators * Cargo area floor: "Easy Clean" vinyl floor covering * Package: Cargo protection package 1 – "Easy Clean" cargo area floor – wheel arch cladding – high side wall cladding * Tire pressure monitoring system * High side wall cladding up to the roof * Partition wall (metal) * 6-speed manual transmission * Anti-lock braking system with electronic brakeforce distribution (EBD) incl. – Electronic safety and stability program (ESP) with traction control (TCS) – Hill start assist – Side wind assist – Emergency brake assist – Rollover protection – Emergency brake support including emergency brake light * Driver-side airbag * Exterior mirrors, electrically adjustable and heated – with integrated indicators * Battery: programmable battery runtime, settable to 10 min * On-board computer with consumption and mileage data (e.g. remaining range) as well as outside temperature display and Ford ECOMode * High roof * Rear double-wing doors with 180° opening angle (without windows) * Rev counter * Third brake light * Electric front windows with quickdown/up function for driver’s side * Ford Easy Fuel – convenience fuel filler cap and misfueling protection * Alternator, high-performance version * Low-beam headlights: halogen headlamps with daytime running lights * Lockable glove compartment * Interior lighting with delay and front reading lamps * Front air conditioning including dust and pollen filter * 70 l fuel tank * Paintwork: solid color * Cargo area lighting * Steering wheel: artificial leather steering wheel * Steering column, height and reach adjustable * MyKey key system – individually programmable spare key * Fog lights * Emergency call assistant * Package: Technology Package 9 – Heated windscreen – Rain sensor wipers – Front and rear parking pilot system – Active emergency brake assist (camera-based) – Lane keeping assistant with drowsiness warning and high beam assistant, additionally with lane keeping aid – Headlamp assistant with day/night sensor – Cruise control – Fog lights – Ford audio system * Particulate filter: diesel particulate filter * Radio: Ford audio system with radio and DAB+ – radio (FM/AM) – digital radio reception DAB/DAB+ (Digital Audio Broadcasting) – MyFord Dock – FordPass Connect – speakers, antenna – audio remote control on steering wheel – Bluetooth interface – USB port – hands-free system * Automatic entry light for sliding door when opened * Sliding door: right-hand side * Rear mud flaps * Side protective strips * Power steering * Seat belts – front seat belt tensioners and force limiters * Seat package 13 – Driver’s seat, 4-way adjustable (forward/back, backrest, seat cushion angle, height) – Double passenger seat with storage compartment under individually folding seat cushions – Headrests, height adjustable – Integrated folding table in double passenger seat – Driver’s armrest – Manual lumbar support (driver’s seat) – Seat covers: fabric * Start-stop system Dedpfxsyhz Dps Ap Ieku * Partition wall (plastic) at B-pillar height * Rear bumper with integrated step * Recirculation function * Lashing eyes * Immobilizer * Heat-insulating, lightly tinted glazing * Central locking with remote control * Overhead storage compartment in front ... and much more. ----The vehicle is in an unprepared condition!

Condition: used, This listing is for a Instron 2518-807 Tension/Compression Static Load Cell. The unit is in full working condition and is ready for immediate release. The Instron 2518-807 Tension/Compression Static Load Cell is engineered for high-precision force measurements in a variety of testing applications. Its robust design allows for accurate tension, compression, cyclic, and reverse stress testing, making it an essential tool in materials testing and quality control environments. Key Features: Capacity: Measures up to 100N (22 lbf), making it suitable for a wide range of testing scenarios. Exceptional Measurement Range: Capable of capturing accurate force measurements down to 1/500th of its capacity, ensuring precision in all applications. Automatic Recognition: Dkodpfoxxzndox Ap Iju Features an electronic serial number and electrical calibration, allowing for simple and error-free operation without the need for manual setup. Integral Overload Protection: Designed with overload protection to minimize the risk of damage during both handling and testing, enhancing durability and reliability. Tare Weight: Offers a tare weight capability of 40% of the force capacity, which accommodates the use of various grips and fixtures for added versatility. Compliance with Standards: Fully compliant with international force measurement standards, including ASTM E4, ISO 7500-1 class 0.5, and JIS B7721, B7733, ensuring reliability and accuracy in testing protocols. Compatibility: The Instron 2518-807 load cell is compatible with various Instron testing systems, including the UT and 3300 series. Its versatility makes it ideal for applications in: Materials Testing: Perfect for assessing the mechanical properties of materials under tension and compression. Quality Control: Utilized in industrial settings to ensure product consistency and adherence to specifications. Research and Development: An essential tool for scientists and engineers conducting experiments on material behaviour under different loads.

Condition: used, This listing is for the Rainin Pipet-Lite XLS Pipette The unit is in full working condition and is ready for immediate use Ergonomic & low‑force design: Featuring Magnetic Assist technology (up to ~70% less plunger force) and LTS® LiteTouch tip ejection, these pipettes are designed to reduce thumb strain and repetitive stress injuries — ideal for long pipetting sessions Djdpoxv Dnbsfx Ap Ijku Broad volume accuracy & reliability: They maintain published accuracy across 10‑100% nominal volume with fixed- or adjustable-volume models, and now include RFID for asset tracking in the XLS+ series Tip compatibility: The LTS system ensures smooth tip loading/ejection, but performs best with genuine Rainin tips, especially in labs using Rainin-branded consumable

Condition: used, This listing is for the PIPETMAN L P10mL 1-10mL Colour-code Light Blue Dksdpfoxv Dq Njx Ap Iou The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability