Used Deckel Fp 4 for sale (686)

Condition: not inspected (used), Year of construction: 1986, feed length X-axis: 580 mm, feed length Y-axis: 400 mm, feed length Z-axis: 450 mm, spindle speed (max.): 2,500 rpm, Grunding Contour 2 table 800x460 mm travel 580x400x450 mm Lhjdpfx Aoy E N Dvjdpok max spindle speed 2500 rpm spindle taper 40

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope Lhjdpfxozq Hk Uo Adpok of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Year of construction: 1987, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, total height: 2,100 mm, total width: 2,100 mm, total length: 2,200 mm, overall weight: 1,800 kg, workpiece weight (max.): 400 kg, 3 Axis digital read out Active digital read out Fixed table 800 x Central lubrication Coolant system with pump X-Axis: 500mm Y-Axis: 400mm Z-Axis: 400mm Table Length: 800mm Table Width: 460mm Table load: 400 Spindle speeds: 2500Rpm Feed rate X-Axis:1300mm/min. Feed rate Y-Axis:1300mm/min. Feed rate Z-Axis:1300mm/min. Stroke pinole: 90mm Length: 2200mm Width: 2100mm Height: 2100mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Lhodpfx Aszdf Efjdpok

Condition: used, Year of construction: 1985, machine/vehicle number: 2204 - 0469, x-travel:580 mm y-travel:400 mm z-travel:450 (390*) mm Ljdpfx Adocxxwajpehk table-size:460 x 800 mm spindle speeds:40 - 4000 U/min feed range:2 - 3600 mm/min feed:4.0 m/min spindle taper:SK 40 dimensions of the machine ca.:3,0 x 2,10 x 2,10 m spindle motor:4,0 kW control:Contour 2 The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin - Chip tray with Splash protection offering More clean and safe working envoirnment.

Condition: used, Year of construction: 1986, machine/vehicle number: 2204-0929, x-travel:560 mm y-travel:500 mm z-travel:450 / 390 mm quill stroke:80 mm feed:2 - 3600 mm/min table surface area:800 x 460 mm spindle turning speed range:40 - 4000 U/min spindle taper ISO:ST40 spindle head swivable left - right:+/- 90 ° control:Contour 2 total power requirement:4,0 kW weight of the machine ca.:2,8 t dimensions of the machine ca.:2,0 x 2,5 x 2,2 m The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine Lhedpfx Ascxxrijdpsk - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin, Chip tray

Condition: used, Year of construction: 1983, functionality: unexamined, total height: 1,900 mm, total width: 2,500 mm, total length: 3,000 mm, table width: 560 mm, table length: 1,400 mm, position of the milling head: Schwenkkopf, space requirement width: 2,500 mm, space requirement length: 3,000 mm, space requirement height: 1,900 mm, We are offering this used Deckel FP4NC milling machine, year of manufacture 1983. Lhsdpsx Sygnefx Adpjk Table dimensions: 1,400/560 mm, swiveling head, SK 40 tool holder, Dialog 4 path control, installation dimensions: 300/250/190 cm. Heavy-duty robust design with slant bed. 8 SK40 tool holders and a machine vice are also available upon request. Location: 89312 Günzburg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, DECKEL FP4M Universal milling machine (1984) Serial number: 2203-1545 Lhedpfx Aezmhlfodpsk Control: HEIDENHAIN POSITIP 855 Travel distances: X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Rapid traverse rate: 1300 mm/min Feed rate: 8 – 630 mm/min Table dimensions: approx. 800 x 460 mm Max. table load: approx. 600 kg Spindle speed range: 50 - 2500 rpm Tool holder: SK40 Without machine vice.

Condition: used, Year of construction: 1990, x-travel 0600 mm y-travel 500 mm z-travel 500 mm table-size 500 mm Lhodpfxoyq Sk Uj Adpsk feed range 2- 10.000 mm/min rapid traverse 10 m/min Tool bore ISO 40 turning speed range 0- 6300 U/min main drive DC 8 kW CNC control Dialog 11 total power requirement 23 KVA weight of the machine ca. 5050 kg dimensions of the machine ca. 3,0x2,5x2,0 m CNC milling machine with Dialog 11 control, housing arround working area, rotary table as a 4th axe and ATC with 40 Positions. Machine has been refurbished by FPS in 2010.

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP4M Active Manufacturer: Deckel Type: FP4M Condition: used, good Digital readout: 3 - axis digital readout Heidenhain Travels: X - axis: approx. 500 mm Lsdpfx Adozgvmdjpohk Y - axis: approx. 400 mm Z - axis: approx. 400 mm Table clamping surface: approx. 700 x 400 mm Speed range: approx. 50 - 2500 rpm Tool holder: ISO 40 Hydraulic tool clamping Drive power: approx. 6.0 kW Feed rates & rapid feeds: in all 3 axes Feed range: approx. 8 - 630 mm/min Rapid traverse: approx. 3.0 m/min L x W x H: approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg Machine light Spindle guard Scope of delivery: - 10x tool holders - Allmatic high-pressure vice - documentation - Spindle guard

Year of construction: 1989, condition: used, machine/vehicle number: 2204-1736, table mounting size: 460 x 800 mm Lhedsclli Uspfx Adpek movement x: 485 mm movement y: 385 mm movement z: 380 mm tailstock stroke: von Hand ca. 70 mm spindle turning speed range: 50 - 3150 rpm carriages continuously adjustable: 2 - 1000 mm/min rapid move: 2 m/min electrical connection: 3,7/4,4 kW space needed: 2100 x 1650 x 1730 mm weight: 1850 kg

Condition: used, Year of construction: 1983, Technical details: x-travel: 560 mm y-travel: 500 mm Lhsdpfxjwgdz Es Adpok z-travel: 450 mm

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected Lodpjzq Hlrjfx Adpohk under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, CNC milling machine DECKEL FP4AT, serial number 2832-1198, travels XYZ = 560 x 500 x 450 mm, 20-position tool changer, control system DECKEL Dialog 11. Ledpozlphfefx Adpshk

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, total length: 800 mm, table width: 460 mm, table length: 800 mm, type of input current: three-phase, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, warranty duration: 3 months, Equipment: documentation/manual, We are offering this fully overhauled Deckel FP4 M milling machine, year of manufacture 1985. Manufacturer: Deckel Model: FP4 M Year: 1985 Condition: overhauled Control: TNC113 Aktiv control Optional: universal table with a clamping surface of 800mm x 370mm If you have any questions or require further information, please send us a message or give us a call. Ledpfx Aox Sllpodpohk

Year of construction: 1987, condition: ready for operation (used), Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment. Ledpsxyk Upefx Adpehk

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Paint Finish in Light Grey, CE Compliant!!! Technical Specifications: - Year of manufacture: 1987 Machine no.: 2203-2790 - Rigid angle table (freshly planed) - Spindle speed: 50–2500 rpm - Feed rate: 8–630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min Ledpfx Aexctyaedpohk - Travel X/Y/Z: 500/400/400 mm - Vertical milling head on column adjustable by 150 mm - Vertical and horizontal quill – SK40 - Vertical quill extendable by 90 mm - Drawbar thread: M16 - Weight approx. 1500 kg Accessories & Features: - 3-axis Heidenhain digital readout - Coolant system - Chip tray - Central lubrication system About the machine: For sale is a Deckel FP4M universal milling machine, CE compliant and in very good condition. The machine has been partially overhauled, displays minimal backlash on the handwheels, and all lead screws move smoothly and evenly. Even at maximum speeds, the milling machine runs quietly. Rapid traverse is available on all axes; all bellows are new. The rigid angle table has been freshly planed. This is a reliable and user-friendly machine. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site.

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearshift - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication Ledpjwhk Ubsfx Adpjhk - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Built in 1988 - Including tool holders, drilling/milling tools, and tool carriage Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: - Pole-changing Three-phase brake motor: Manual gearbox with forward/reverse rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: Ljdpfeu Tuk Hox Adpohk - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Lhedpfx Adezvv R Uepek

Condition: good (used), Year of construction: 1986, CNC universal milling machine Lhsdpfx Adjzvnhropsk Make DECKEL Type: FP5NC Bj.1986 control DIALOG 4 Traverse paths: X710mm Y600mm Z500mm Clamping table : 1000mm x 550mm Tool clamp: SK40 Feed speed programmable: 2 ... 3600 mm / min Speed: 18 ... 6300 rpm Spindle power: 7.5KW machine in stock.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Deckel FP4MK with 3-Axis Heidenhain Active Digital Readout in Light Grey, Very Good Condition, CE Compliant! Technical Data: >> Year of manufacture: 1992 Machine No.: 2203-8489 >> Fixed angle table >> Speed range: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved on the spindle carrier >> Vertical quill and horizontal quill – ISO 40 taper >> Vertical quill extension: 90 mm >> Hydraulic drawbar system >> Weight approx. 1,600 kg Accessories and Features: >> 3-axis active digital readout (Heidenhain) >> Coolant system Ledew Evq Aopfx Adpohk >> Chip tray >> Centralized electric lubrication >> Operating manual, spare parts diagrams About the Machine: Offered is a Deckel FP4M Aktiv universal milling machine in very good condition, CE compliant. The machine has very little backlash in the handles, and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. It features a hydraulic clamping system. On this newer FP4 model, the feed is infinitely variable on all three axes, and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain linear control, you can input dimensions that the machine will approach automatically. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and more precise. Take the opportunity to view and test the machine under power on site.

Condition: used, Year of construction: 1985, Technical details: x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm control: Contour 1 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90° ° quill travel: 80 mm milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min feed:: X/Y/Z: 2 - 1000 steples mm/min rapid traverse : X/Y/Z: 2000 mm/min revolution per minute: horizontal: bis 1.000 U/min Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m -Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit Lhsdpfx Asu Ndcmsdpsk *

Year of construction: 1968, condition: good (used), For sale is a Deckel milling machine from 1968. The machine is in good to very good condition and fully functional. (No digital display, but one can be additionally installed upon request.) Technical data: Tool holder: SK 40 Travel ranges X/Y/Z: 400 / 200 / 400 mm Spindle speed range: 40 - 2000 rpm Spindle travel, vertical: 60 mm Spindle travel, horizontal: 100 mm Feeds: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Ljdpfxoihf Eto Adpshk All prices plus VAT. Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website.

Condition: excellent (used), Year of construction: 1986, Dear Sir or Madam, We hereby offer you well-maintained milling machines of the Deckel FP4M type. The machine will undergo a thorough technical inspection in our workshop and will therefore be fully functional. We look forward to receiving your inquiry! Delivery time: upon request Machine no.: xxxx-xxxx Year of manufacture: xxxx Table design: fixed Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Rapid traverse: 1300 mm/min Travel distances X/Y/Z: 500/400/400 mm Tool holder: SK40 Drawbar system: M16 Vertical quill stroke: 90 mm Lsdpfxelrw Tis Adpshk Weight: approx. 1.6 t Further equipment and accessories: upon request Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and, if applicable, worn parts are replaced beforehand - Upon request, we can completely or partially overhaul the machine of your choice - You can freely choose the paint color of the machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional accessories such as safety devices, etc. - We will gladly take care of the shipping and/or installation.

Condition: good (used), functionality: fully functional, Deckel FP 1, Year of manufacture approximately 1983 / Overhauled by Arnold & Co. around 2012 3-axis digital display, Travel range X/Y/Z 400/150/340 mm, Table size 600 x 210 mm, T-slots: 4 T-slot width: 12 mm Spindle speeds: 20 - 2000 rpm Speed stages, main spindle: 12 Feed stages: 10 Lhjdpfx Ajzfglhodpek Spindle mount: MK 4 Vertical quill travel: 60 mm Machine weight approximately: 0.8 t