Used Discharge for sale (2,278)

Condition: good (used), Diaphragm pump, compressed air diaphragm pump, chemical pump, compressed air-operated double diaphragm pump Gsdpfx Aovxrzremyjbl -Manufacturer: Graco, air-operated double diaphragm pump -Type: Husky 515 D51211 -Flow rate: 15 - 60 l/min -Discharge pressure: 7 bar -Total dimensions: 260/200/H270 mm -Weight: 3.8 kg

Condition: used, Year of construction: 2022, Manufacturer: ASGO Model: MVZH150 Year: 2022 Condition: Used Serial number: 25134 Stock number: 3373 Mixer: 150 liters, Z-arm Mixing speed: 15-45 RPM Infeed height: 1200 mm Discharge height: 700 mm Gbsdpjy Rp Rtsfx Amyel Vacuum pump: Busch RA0025, 25 m³/h Power supply: 3 x 400V, 50Hz, 3.5kW Dimensions: 750 x 1700 x 1500 mm Weight: 485 kg

Condition: used, Year of construction: 2007, Travel distance: Gbsdpfx Aouu Dl Rjmysl X 500 mm Y 350 mm Z 300 mm Water bath machine Automatic wire threader

Condition: used, twin shaft paddle mixer suitable for vacuum useful loading volume : ± 2.600L 2 discharge guards with new control box power ± 30 kW Gsdey N Tyijpfx Amyebl dimensions : ± 2.650 x 2.300 x 2.400 mm

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total width: 1,050 mm, wire diameter (max.): 0.3 mm, overall weight: 3,500 kg, controller manufacturer: MITSUBISHI, controller model: D‑CUBES / M800 series, product length (max.): 3,030 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MV2400R wire-cut EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm, accommodating workpieces up to 1050 × 820 × 305 mm and weighing up to 1500 kg. If you are looking to get high-quality wire-cutting capabilities, consider the Mitsubishi MV2400R machine we have for sale. Contact us for further details. • Axis travels: U ±75 mm, V ±75 mm • Max. workpiece dimensions (W × D × H): 1050 × 820 × 305 mm • Max. workpiece weight: 1500 kg • Table dimensions (W × D): 840 × 640 mm • Max. taper angle: 15° at 260 mm workpiece height • Wide‑angle taper (option): up to 45° at 60 mm (with special guides) • Positioning accuracy: ≤ ±2 μm over full stroke (MV‑R series spec) • Dielectric tank capacity: 860 L • CNC control: Mitsubishi D‑CUBES / M800 series; Industry 4.0 ready (networking and monitoring interface) • Machine condition: Excellent condition; very low hours • Industry 4.0: Prepared for connectivity Gsdpfx Amoy Rrcfeyebl

Condition: used, Year of construction: 2022, Manufacturer: ASGO Gbodpfx Aey N Dkxomysl Model: MVZH150 Year: 2022 Condition: Used Serial number: 25134 Stock number: 3373 Mixer: 150 liters, Z-arm Mixing speed: 15–45 RPM Feed height: 1200 mm Discharge height: 700 mm Vacuum pump: Busch RA0025, 25 m³/h Power: 3 x 400V, 50Hz, 3.5kW Dimensions: 750 x 1700 x 1500 mm Weight: 485 kg

Year of construction: 2016, condition: used, Trepko 9104-2 FFS Line + Freemantle S09 (2016) Trepko 9104-2 Form–Fill–Seal Cup Packaging Line (2016) with T. Freemantle S09 Wrapper This complete Form–Fill–Seal (FFS) production line from 2016 is engineered for high-capacity manufacturing of thermoformed cup products. The main unit, Trepko 9104-2, forms cups from roll-fed plastic material, fills them with viscous food products, seals with PET/EVOH lids, cuts multipacks, and discharges them for further downstream handling. Included with the line is a T. Freemantle S09 wrap-around packer from 2016 for grouping and wrapping finished multipacks. The line is ideal for yoghurt, dairy desserts, processed cheese, margarine/spreads, pâté, and other pumpable or semi-solid food products. Key Features - Complete FFS system: forming, filling, sealing, cutting, and discharge - Designed for 125 g cups (available formats: 4-pack and 8-pack) - Fully automatic, continuous operation - Hygienic, stainless-steel construction - Suitable for chilled and ambient food products - Includes T. Freemantle S09 wrapper/packer for downstream grouping - Supplied with documentation and manuals Gbodpfsx Eldxex Amyol TREPKO 9104-2 – Technical Highlights Cup Forming - Thermoforming from PS/EVOH/PE roll material - Max film width: 740 mm - Max roll diameter: 1000 mm - Heavy-duty forming tools for 125 g round cups - Multi-cavity arrangement for high throughput Filling System - Stainless steel volumetric dosing block - Multi-nozzle configuration for accurate filling - Suitable for viscous food products - CIP-compatible design Sealing - Lidding material: PET/EVOH, width 240 mm - Heated sealing station for hermetic seals - Precise lid positioning and temperature control Cutting & Discharge - Automatic multipack cutting - Supports 4-cup and 8-cup retail pack formats - Smooth discharge conveyor for integration with wrapping or case packing T. Freemantle S09 Wrapping Unit (2016) - For grouping and wrapping cup multipacks or blocks - Film-fed automatic folder/wrapper - Adjustable for various package dimensions - Stainless-steel construction, CE marked - Compact, reliable downstream solution Applications - Stirred yoghurt - Sour cream / dairy desserts - Processed cheese spreads - Margarine, butter portions, vegetable fat spreads - Dips, pâté, paste-type products - Any pumpable or semi-viscous food requiring thermoformed cups Technical Information - Trepko Model: 9104-2 - Machine No.: 3859 - Year: 2016 - Voltage: 415 V / 50 Hz - Freemantle S09 Year: 2016 - Voltage: 240 V - Full documentation available. Condition The line is in very good used condition, complete with all major forming, filling, and sealing components, stainless-steel safety enclosures, and electrical cabinets. Well maintained and previously used for yoghurt production in a European dairy facility.

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm net drum length 4.200 mm Gbodey Nax Ejpfx Amyel adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) discharge height: ± 1.000 mm power 3kW 400V, 50Hz 4 spray pipes Provided for extraction

Condition: used, Manufacturer: FAM Model: FV-2D Year: 2002 Condition: Used Serial number: 5488 Stock number: 3371 Knife speed: 450 rpm Knife set: grater Infeed height: 1550 mm Discharge height: 600 mm Power: 3 x 380V, 50Hz, 2.2kW Dimensions: 1400 x 800 x 1550 mm Godpfxsy Nlwms Amysbl Weight: 260 kg

Condition: excellent (used), Catalogue number: 7924 TECHNICAL DATA hopper top opening (L/W): 500x600 mm hopper length: 2070 mm shaft width: 550 mm motor: 55 kW number of knives: 4 pcs outlet for shredded wood: rectangular 560/360 mm dimensions (L/W/H): 3950x1520x2820 mm weight approx.: 2500 kg – drum chipper – 4 knives on the shaft – additional built-in fan for chip discharge – condition: very good – used chipper Gbedsy R Dq Ijpfx Amyol Net price: 23,900 PLN Net price: 5,690 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, total length: 700 mm, total width: 840 mm, total height: 940 mm, DGUV certified until: 06/2028, conveyor belt width: 750 mm, input frequency: 50 Hz, working width: 500 mm, type of input current: three-phase, Equipment: chassis, Baguette - long roller Model: UNIC with 3 rollers Gbedpfxohwzkcs Amyjl Capacity: min 50 - 1200 g max (depending on the type of dough) Unrolling width: up to max. 750 mm stainless steel design, Connection: 400V, 1.1 kW, 16A-CEE plug Dimensions: 966 x 855 x 714 mm, WxDxH NEW machine with 24 months warranty Option: base infeed conveyor discharge tours Discharge belt with drive feed guides Visit our large bakery machine park!

Condition: used, loading : max. 2000 to 2200 kg (depending on the product) all stainless steel vacuum pump not included Lutetia control adjustable speed Gjdpey Izkasfx Amyebl tilting system to discharge 1 water filter dimensions (l x w x h) : ± 3.600 x 1.550 x 1.990 mm

Condition: used, all stainless steel Gbsdpfx Amey Izi Ajyol 2 front discharge guards 2 mixing directions safety lid overall dimensions (l x w x h) : ± 2.200 x 1.000 x 2.100 mm

Year of construction: 2020, condition: ready for operation (used), Wood production line manufactured in 2020. This HYMMEN JUPITER JPT C 680/548 mit OFS 850 features a maximum printing width of 548 mm, with a system speed ranging from 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, ideal for the flooring and furniture industries. If you are looking to get high-quality printing capabilities, consider the HYMMEN JUPITER JPT C 680/548 mit OFS 850 machine we have for sale. Contact us for further details. • General system data: • Nominal width: 680 mm • Maximum printing width: 548 mm (expandable to 680 mm) • Maximum panel width in OFS: 510 mm • Working height: 900 mm (+50 mm) • Processing: printing and top coating from above, counter-coating from below • Operating mode: dual-lane up to max. 255 mm part width; otherwise single-lane • System speed: 8–65 m/min • Printing speed: up to 50 m/min • Jupiter digital printing unit (JPT): • Number of colors: 4 • Printheads per color: 8 (max. 10 possible) • Free slots for additional colors: 6 • Printhead type: XAAR 2001 • DLE structure printing unit: • Print rows: 1 • Printheads per row: 8 (max. 10 possible) • Free slots for additional rows: 1 • Total printheads: 8 • Printhead type: XAAR 1003 • Raw panel specifications: • Length: 600–2800 mm • Width: 900–1260 mm • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Cutting format saw: • Longitudinal cuts: 5 • Longitudinal trimming units: 2 • Minimum part width: 160 mm • Finished panel specifications: • Length: 600–2800 mm • Width: 160–510 mm • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Feeding system (infeed): • Type: vacuum portal • Feeding stations: 2 • Discharge positions: 1 • Max feeding capacity: 8 cycles/min; with double stacking: 16 panels/min • Identical stacks per station: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm • Max stack weight: 5000 kg (combined) • Design: without pits • Transport mode: protective plate or pallet • Protective plate (infeed): length 800–2800 mm; width 1000–1260 mm; thickness 20–30 mm (up to 150 mm for pallets); max 80 kg per plate/pallet • Stacking system (outfeed): • Type: drop shaft • Stacking positions: 1 • Max stacking capacity: 30 cycles/min • Identical stacks per position: up to panel length 1550 mm = 2; ≥1550 mm = 1 Gbjdpfx Amey N U Rceyjl • Max stack height: 1050 mm (alternative: 1000 mm) • Max stack weight: 5000 kg (combined) (alternative: 3500 kg) • Design: with pits • Transport mode: protective plate or pallet • Protective plate feeding method: loading by forklift, separation by robot • Protective plate (stacking): length 800–2800 mm; width 1000–1200 mm; thickness 20–30 mm; max 80 kg per plate; material OSB or HDF • Process aggregates: • Number of aggregates: 35 • Process steps: feeding, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking • Application: • Industrial single-pass digital printing line for high-speed surface finishing of large panels (flooring and furniture), producing realistic wood, stone, or custom decors directly on substrates Additional equipment • Robot for protective plate separation at outfeed (as part of protective plate handling)

Condition: used, Year of construction: 2012, No. 3268 Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” Used, year of construction 2012 Consisting of: - Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Automatic steel cutting machine Schirmer SZA 450 - Buffer screw station Schirmer - Bar machining center Schirmer SBZ I Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Cutting length 300 - 3900 mm - Automatic feed magazine for 9 profiles up to 6500 mm in length - Automatic transfer station - Loading device for PVC profiles up to 6500 mm in length with NC-positioned gripping tongs, positioning speed up to 150 m/min - Profile length measuring device incl. optimization software - Automatically adjustable profile guides - Machining station designed as a G-module “Ultra Speed” Machining operations on the PVC profile: - Drainage and ventilation slots/holes in the frame, sash, and mullion profiles; handle olive holes for front doors; lock plate markings; lock case cutouts - Height measuring device for detecting profile tolerances - Seal cutting device - VU sawing unit with dual sawing unit 2x 45° - Sawing unit in standard configuration with 1 sawing unit, swivel range +45° to -45° - Conveyor belt for waste removal - NC-controlled gripping tongs for bar removal, positioning speed up to 180 m/min - PC machine control: 7-slot ATX industrial PC, Microsoft Windows XP Professional, software: TwinCAT NCI - Horizontal recirculating buffer for transporting profiles to the steel insertion station and screwing station for the steel insertion station with 8 insertion slots - Monitor for displaying steel lengths - Automatic label printer Automatic steel cutting machine Schirmer SZA 450 - Automatic feed magazine, max. profile length 6000 mm, profile width 25 - 50 mm, profile height 15 - 60 mm, wall thickness max. 4 mm - Insertion device - Standard sawing unit for 90° cuts Gbjdpfsy Nnnnsx Amyjl - Automatic bar discharge - Belt conveyor - Extraction device - Steel scrap processing - Steel length measurement in the steel loading magazine Buffer screw station Schirmer - Feeding device for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Screw station - Steel feeding fingers for reinforcement profiles up to 200 mm insertion depth Bar machining center Schirmer SBZ I - Feeding device for PVC profiles up to 3900 mm in length, speed up to 180 m/min - Automatically adjustable profile guides - Measuring probe for automatic determination of the zero point at the start of the profile - Drilling station with 4-axis CNC control, 2 vertical axes, 1 horizontal axis, and 1 axis for X-feed - NC-controlled gripping tongs for bar transport, positioning speed up to 180 m/min - Special-design belt conveyor for cross-feed - Sash visualization software including monitor - Screwing station with screw feeder - Guide rail with balancer for bar screwing unit - Bar screwing unit with automatic screw feed Machine capacity: Approx. 120 window units 1400 x 1500 mm/8 hours If the machine is expanded with an additional screwing unit at the buffer screwing station, the capacity increases to approx. 160 units/8 hours Sale on behalf of customer, ex location near 30625 Hannover, without dismantling, without transport and assembly To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment For used machines, any warranty is excluded, the following applies: “sold as seen”

Condition: like new (used), Year of construction: 2007, functionality: limited functionality, Full stainless spiral. Currently Built up in storage. 410 Belt width 2100 Drum diameter Gbedourhv Iepfx Amyel 3620 Overall width 5681 Infeed to discharge 135 Tier pitch 16 tiers Requires evaporator & control panel refurbishment

Year of construction: 2013, condition: used, Make: EXTRUDEX, Year of manufacture: 2013, comprising: Granulate drying/conveying unit, Manufacturer: Koch, Model EKO300F, Year: 2013, Serial No.: 4459, microprocessor control, drying cylinder ETB1000, capacity: 1,000 l, vacuum conveyor, 2 dosing/conveying units, IFS exhaust air system, single-screw extruder, 3-part cooling section, refrigeration unit by Daikin, diameter measuring system by Zumbach, inkjet coder by VideoJet, Model 1710, microprocessor control, flame treatment unit by Hill, Model MF20-2-1, Year: 2013, caterpillar take-off by Extrudex, Model BC105, discharge conveyor belt, discharge chute, waste container, mobile, forklift pockets, peripheral devices, control cabinets, set of long part racks, 2 accessory cabinets, 2-door, industrial vacuum cleaner, workbench, 1,500 x 700 mm with base cabinet, 3 drawers. Gbjdpfoyx Eytsx Amyjl

Condition: used, Unused from new Caldereria Teruel (Spain) approximately 1,000 litre 316L stainless steel IBC. Internal measures approximately 1110mm diameter X 1230mm straight side. Mounted on stainless steel forkliftable base. Hinged manway lid on top dish with fast release clamp. 40mm side bottom discharge with valve. In stock and immediately available. Gbedpjyh I Tqjfx Amyjl Specifications: Material Grade: 316L Stainless Steel Dimensions: 1110mm diameter X 1230mm straight side

Condition: used, Year of construction: 2005, Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph The Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph efficiently delivers continuous production in the bottling sector. Manufactured in 2005, this machine currently operates and, importantly, remains available for on-site inspection until March 2025. Technical Features of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine, model SR8, features 8 cavities for bottle formation. Consequently, this configuration produces 12,000 bottles of 0.5 liters per hour. For larger formats, such as bottles of 1.5 liters and 2 liters, it achieves a production speed of 9,600 bph. Moreover, the 18-81 bottle neck type guarantees compatibility with a wide range of caps and closures, making it adaptable to diverse production needs. Thus, this standard ensures precise sealing and airtight closures.. Main Components of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine integrates a preform loader, a preform elevator, and a preform orientator, which work in harmony to provide an automated and efficient feeding process. Preform loader: This component loads preforms from the storage area or initial container and transfers them seamlessly to the elevator system. Consequently, it ensures continuous feeding without manual interruptions. Preform elevator: The elevator lifts the preforms from the lower level to the machine’s operating level, ensuring a continuous flow to the orientator and minimizing downtime. Therefore, production proceeds smoothly. Preform orientator: The orientator positions and aligns each preform correctly before inserting them into the blow molding cavities. Additionally, using mechanical guides or vibrations, it prevents misaligned preforms from entering the process. Gjdpfxevv E Hie Amyebl The integrated tipper tilts and discharges large quantities of preforms, typically stored in containers or boxes, in a controlled manner. Subsequently, the tipper feeds the preforms into the production line, maintaining a consistent flow while preventing overloads and blockages. By automating this process, the tipper reduces manual handling and significantly increases safety and productivity. The unscrambler plays a key role in separating and aligning the preforms before their insertion into the blow molding cavities. Specifically, by applying rotation and vibration, the unscrambler ensures optimal positioning, minimizing errors and machine stoppages. Hence, the combined action of the tipper and unscrambler maximizes production line efficiency and guarantees product quality. Furthermore, the machine’s rotary configuration facilitates continuous and stable production, which is ideal for high-intensity manufacturing. Its rotary technology, as a result, distributes heat evenly during the blowing process, ensuring high-quality output. Safety and Documentation The blow molding machine includes technical manuals and safety protections.

Condition: used, This 3-ton asphalt thermal container, including discharge chute, is being auctioned online in our industrial/machinery auction: combined auction for construction equipment, building materials, vehicles, site equipment, and garden machinery. Gjdey Nht Djpfx Amyjbl

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, controller manufacturer: OKUMA, number of axes: 4, This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, live tooling with C-axis capabilities, and synchronous tapping for enhanced productivity. The machine includes an integrated tool setter for precise measurements and a programmable tailstock for versatility. If you are looking to get high-quality turning capabilities, consider the Okuma LU15 M-2SC 1000 horizontal turning machine we have for sale. Contact us for further details. • Longitudinal Travel (X): 1020 / 995 mm • Cross Travel (Z): 260 / 140 mm • Turning Range: 340 mm • Swing Diameter over Bed Cover: 530 mm • Swing Diameter over Cross Slide: 380 mm • Spindle Nose: ASA-A2 / DIN 55026 Gr. 6 • Spindle Bore: 62 mm • Spindle Diameter in Front Bearing: 100 mm • Chuck Diameter: 200 mm • Main Drive: Motor spindle (hollow shaft motor) frequency-regulated 60% ED • Power (Main Drive): 22 kW • Max Torque: 412 Nm • Speed Range: 45 - 4,500 rpm • Speed Levels (Electrical): 2 • Feed Drive: AC servo motors, digitally regulated • Feed Range X/Z: 0 - 1,000 mm/U Gbsdpfsy Nmi Dox Amyol • Rapid Traverse X/Z: 15 / 20 m/min • Power X, Z: 2.4/1.5 kW and 4/4 kW • Feed Force X, Z: 11/3.7 kN and 7/6.7 kN • Turrets: 2 tool turrets • Live tooling: Yes (C-axis and driven units) • Tapping: Synchronous tapping • Spindle interpolation: Automatic main spindle interpolation • Tool monitoring: Wear and breakage monitoring • Tool measurement: Integrated tool setter / measuring device • Tailstock: Programmable, towable with bed slide, automatic clamping • Tailstock quill: Controllable via M-command • Draw tube bore: 55 mm (partial hollow clamping cylinder) • Interface: DNC Interface RS-232C • Cooling system: Reinforced pump (8 bar at 30 l/min) • Programming: ONE TOUCH Dialog-NC (automatic work plan generation) Additional equipment • Chip conveyor (1,200 mm discharge height) Technical Specification Counter Spindle No Driven Tools Yes

Condition: new, Year of construction: 2026, functionality: fully functional, A multihead weigher is a highly precise weighing system that simultaneously weighs products on multiple load cells. The ideal combination is calculated automatically, ensuring the target weight is reached with minimal deviation. Multihead weighers are especially suitable for free-flowing products. When combined with a vertical packaging machine, they provide a continuous, automated packaging process. Multihead weighers reduce product loss through exact weight combinations and enable higher cycle rates, particularly for expensive or delicate products. Features - 10 to 36 heads available - Automatic frequency adjustment of vibration for uniform and precise product distribution - Automatic zero adjustment during operation for improved accuracy - Self-diagnostic alarm via popup window for easy troubleshooting - Option to select single or multiple drops for higher weights - Software-controlled side discharge for non-conforming weights, minimizing film and product waste - Live display of individual amplitudes for precise monitoring and control of each vibrator - Live display of individual weighing results - Centralized load cell feeding control replaces photoelectric sensor - Forced discharge function for frozen products to prevent melting when not selected - Weighing cells supplied by HBM - Program memory for parameter settings - Weigher available as a waterproof system at additional cost Technical Data - Max. speed: 60 weighings per minute (wpm) - Weight: 430 kg Godpjw Ekh Njfx Amysbl - Weighing range: 10–5,000 g - Accuracy: +/- 1.0–1.5 g - Hopper capacity: 1.3L, 2.5L, 4L & 5L - Control panel: 7'' touchscreen - Drive system: stepper motor - Level control: load cell - Surface: optionally stainless steel, surface-treated, or Teflon (other finishes on request) - Material: Stainless steel 304 - Connection: 220V / 50Hz

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, overall weight: 3,600 kg, EDM MACHINE AGIE CHARMILLES AGIETRON IMPACT 3 WITH C AXIS TRAVEL X AXIS: 500 mm Gbjdsy Rd Imepfx Amyel TRAVEL Y AXIS: 350 mm TRAVEL Z AXIS: 500 mm TRAVEL C AXIS: 360° TABLE SIZE: 800 x 600 mm TANK DIMENSIONS: 1100 x 730 x 400 mm ELECTRODE CHANGER: 28 POSITIONS ACCESSORIES: EROWA SYSTEM

Condition: excellent (used), Catalog number 6726 Gbedpfx Amjy N N Uvjyol TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, total height: 2,780 mm, total width: 3,395 mm, wire diameter (max.): 0.3 mm, overall weight: 6,000 kg, product length (max.): 3,640 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Sodick ALC800G Premium was manufactured in 2021. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm, providing a versatile working area with a maximum workpiece weight of 3,000 kg. If you are looking to get high-quality wire EDM capabilities, consider the Sodick ALC800G Premium machine we have for sale. Contact us for further details. • Axis • Number of axes: 5 (X, Y, Z, U, V) • U/V travel: 200 × 200 mm • Working area • Work tank size: 1,410 × 1,110 mm • Max. workpiece weight: 3,000 kg • Distance table to floor: 995 mm • Wire system • Max. wire speed: 420 mm/sec • Wire tension: 3 – 23 N • Taper angle: ±25° (at 130 mm thickness) • Machine dimensions • Installation space: 4,675 × 5,050 mm Gjdpjy I Ur Rsfx Amyebl • Electrical • Power supply: 3-phase, 400V, 50/60Hz • Power consumption: 13 kVA