Used Discharge for sale (2,708)

Condition: good (used), Year of construction: 2020, pressure (max.): 10 bar, noise level: 68 dB, Double-piston compressor with dryer Brand: KAESER Model: KCT 401-100 Year: 2020 Type: Double-piston and oil-free (dry-running) Pressure: 10 Bar Flow rate: 275 Liters/min. Power: 2.4KW (3.2Hp) Tank: 100 Liters Sound level: 68dB Three-phase 380V - Suitable for continuous use: Unlike conventional piston compressors, the KCT series compressor blocks from Kaeser are designed for a 100% duty cycle. Ijdpfx Aoz E R Dxop Djtn - Typical applications: Dentistry, laboratories, pharmaceutical sector, medical technology, food packaging, and the electronics industry where completely clean air is required according to ISO 8573-1 Class 0 standard. Air dryer: - Brand: Kaeser - Model: TAH7 KRYOSEC - Single-phase 220V - Flow rate: 600 Liters/min. - Environmentally friendly refrigerant: R-513A - Weight: 24Kg - Plate heat exchanger: Made of stainless steel with low pressure drop. - Integrated condensate drain: Equipped with an electronic condensate drain ECO-DRAIN as standard (does not lose compressed air during discharge). - Hot gas regulation: Prevents internal freezing when the unit operates at low air load.

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 400 mm, wire diameter (max.): 0.3 mm, overall weight: 2,700 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MP1200 wire EDM machine was manufactured in 2021. It features a robust design with a machine weight of 2700 kg and is equipped with the advanced D-CUBES controller. If you are looking to get high-quality wire electrical discharge machining capabilities, consider the Mitsubishi MP1200 machine we have for sale. Contact us for further details. Ijdpfxez E Su Eo Ap Dstn - Machine Type: Wire Electrical Discharge Machine- Series: MP Series (Water Technology)- Type: TYPE II- Controller: D-CUBES- Power Supply: 3PE 50Hz AC200V, 35A, SCCR 2.5kA- Air Source: 0.5 MPa, 75 L/min- Operating Hours:- Machining Time: 3711- Start Time 1: 26- Start Time 2: 4137- Off Time: 426

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 200 m², input voltage: 380 V, volume flow: 20,000 m³/h, total width: 2,400 mm, total length: 3,500 mm, total height: 8,500 mm, compressed air connection: 6 bar, warranty duration: 12 months, input frequency: 50 Hz, noise level: 75 dB, Equipment: documentation/manual, Dust collector – Self-cleaning filter with filter sleeves – NEW – Airflow rate: 20,000 m³/h Dimensions: approximately 3600 x 2400 x 8500 mm (height) Filter area: 200 m² Filter fabric cleaning system: reverse-flow air jet Discharge of filtered dust: motorized screw conveyor, 1.1 kW – rotary valve, 0.75 kW Itedpjz Nhgyefx Ap Dsn Explosion-proof ventilation panels: 2 Electrical control panel Electrically driven fan: 30 kW

Condition: used, Year of construction: 2018, operating hours: 1,253 h, 2018 | Genie TZ™-50 Hybrid w/Drive (16.92m) | Used Trailer-Mounted Boom Lift | 1253 hours 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 24000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 37 inspection points 35 approved ✅ 1 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Batteries were discharged during the time of inspection. Started with a booster. There is play on the basket. Itodpfx Apszrm Ipj Don 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38158 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, maximum load weight: 28,100 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/1997, loading space volume: 40 m³, total length: 9,320 mm, total width: 2,550 mm, total height: 3,880 mm, Equipment: ABS, Kässbohrer 3-axle silo semi-trailer / bulk goods / 34,000 kg, 40 m³ Description / Features Kässbohrer silo tank semi-trailer * First registration: 10/1997 * 3 axles * Permissible total weight: 34,000 kg * Rear axle load: 3 x 8,000 kg * Tires: 365/80 R20 * Silo for dust and free-flowing bulk goods * Aluminum silo container * Pressure discharge / pneumatic discharge Ijdpfx Apsz Nbx Is Dstn * Extensive hose and pipe connections * Rear discharge * Ladder at the rear * Walkway / work platform on top * Side hose pipes * Storage box * Support legs * Air suspension * Drum brake system * Container and chassis in good visual condition * Available immediately We are happy to provide further information.

Condition: used, functionality: fully functional, machine/vehicle number: 35035, mileage: 7,700 km, power: 110 kW (149.56 HP), first registration: 03/2026, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel, loading space volume: 4.2 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Isdpoz Hxftefx Ap Dstn 4-cylinder engine, features an ECO mode and start/stop system, low-maintenance automated manual transmission type Duonic 2.0 (dual-clutch transmission), ABS, ASR, ESP, disc brakes, emergency braking assistance system (AEBS), Active Brake Assist 6, emergency brake light, tire pressure monitoring system, LED daytime running lights, LED headlights, leaf spring suspension, differential lock, hill start assist, lane keeping assist (LDWS), front collision assist, attention assist, turning assist, ball-type trailer hitch, lockable fuel tank, main tank 100 l. Cab with 3 seats, driver's comfort suspension seat, adjustable steering wheel, electric windows, heated and electrically adjustable mirrors, multifunction steering wheel, cruise control, radio with Bluetooth, digital tachograph, immobilizer with transponder, speed limiter, interface for alcohol tester, central locking with remote control. Air volume approx. 4.2 m³, usable volume approx. 4 m³, wall thickness 5 mm, level indicator (float) calibrated in 500 l increments, lower suction connection DN 100 Perrot, separate suction connection for hose DN 100, vacuum pump Jurop PNR 73 (approx. 432 m³/h) hydraulically driven, safety valve operating overpressure 0.5 bar, ventilation valve 0.2 bar, tank emptying by free discharge, expulsion with 0.5 bar via vacuum pump, control panel illuminated, made of stainless steel, splash-proof and lockable, located on the rear right of the superstructure, remote control, 2 hose trays made of aluminum, maximum length, 2 hook brackets on the full-width tailgate for securing hoses, suction hose reel with hydraulic drive, designed to accommodate approx. 40 m of suction hose DN 80 (suction hoses are not included in the price; hoses will be coordinated with the customer in the event of rental), waste container at the end of the frame on the right, lockable tool box at the rear left, 4x LED work lights, 2x at the rear and 2x on the right and left of the superstructure, 1x rotating beacon at the rear of the vehicle and 1x at the front left, 2x A-sign.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1320, For sale: SODICK CNC wire-cut EDM machine - Model: AQ325L LN 1W - Year: 2002 - Serial No.: 1320 The machine has been regularly maintained by BTS COMPANY d.o.o. and CELADA d.o.o. It was used for machining workpieces weighing up to 5 kg and for various toolmaking applications. Thanks to its precision, it operates with the accuracy of a measuring machine. Itsdpfx Aez Iywajp Don It is connected to the power supply and ready for operation.

Condition: reconditioned (used), Year of construction: 2015, Presto HAN10R Year of manufacture: 2015 2 units immediately available Skip loader container 10 cubic meters usable volume Top-hinged discharge door Two-part lid, opening to the left/right above the filling opening Itsdpfxsz E U Twe Ap Don Prepared for ramp operation Technically refurbished, inspected, and serviced Painted in RAL6018 We will gladly prepare an offer including delivery.

Condition: used, Stainless steel ribbon blender mixing machine Mixing capacity: 300 liters Motor power: 7.5 kW All parts in contact with the product are made of stainless steel Iedez Hc Swspfx Ap Dstn All other parts are white coated Completely overhauled Equipped with a pneumatic discharge hatch See our other listings.

Condition: used, maximum load weight: 32,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2026, next inspection (TÜV): 03/2027, loading space volume: 28 m³, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2026, Equipment: ABS, KÄSSBOHRER stainless steel tank semi-trailer, 28,000 liters, for AdBlue. First registration 03/2026, from first owner. Mileage only 41,100 km. Tank saddle trailer made of V2A stainless steel, 100 mm insulation, Volume 28 cbm, with 2 baffle plates. The front baffle is closed in the lower area, so approximately 5,000 liters remain in the first compartment above the kingpin. Discharge takes place via an outlet with a disc valve, ending in the rear cabinet. 1 x filling dome/manhole DN 500. Aluminum short chassis, Wabco trailer EBS with RSS anti-roll protection, Itjdoz Hr U Uspfx Ap Don BPW axles with disc brakes, Tires 6 x 385/65 R 22.5, Shiny aluminum rims, 1st and 3rd axles are lift axles, Access ladder on the right side of the tank. Data acquisition via BARTEC PETRO 3003 Chem with compact controller, printer in a protected stainless steel display case, wireless remote control for hose reel, 20 m. Delivery hose DN 50, 1x Vogelsang rotary lobe pump GL186Q, self-priming, tank filling with its own pump, fast loading and unloading with up to 600 l/min. delivery rate, Overfill protection internal and external, 2" delivery device. Condition as new, immediately available. RENTING is the new BUYING; with us, it is also immediately available with a full-service rental agreement.

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: WDW-70056, WDW – Calibrated containers – Continuous weighing scale for weighing wood pellets or other pellet-shaped bulk goods, complete with a discharge unit. Performance / throughput: 15.6 tons/hour; weighing accuracy: +/- 0.01 kg; cycle times: approximately 2 weighings per minute; the photo shows a representative image; the machine is delivered in its original packaging. Itjdpfx Apoz Ixc Is Dsn

Condition: excellent (used), Year of construction: 2017, No. 1 rectangular filter station with a mechanical shaker cleaning system, operating under positive pressure, with the following dimensions: Width: 3,400 mm Length: 6,600 mm Height: 7,500 mm Filtering surface: 396 m2 Manufactured from galvanized steel sheet, complete with: - No. 160 polyester satin filter bags, 350 g/m², Ø250 × 3,000 mm, open at both ends; - No. 320 galvanized quick-release clamps, Ø250 mm; - No. 2 filter support frames; - No. 1 electric motor, 2.2 kW – 6 pole; - No. 1 external filter housing enclosure; - No. 1 access door to the filter compartment; - No. 1 vertical access ladder to the filter compartment; Ijdpfxjz Hz Hte Ap Djtn - No. 2 clean-air discharge stacks complete with air sampling connections; - No. 6 braced support legs; - No. 1 dust collection hopper complete with inspection hatch; - No. 1 screw conveyor, complete with 2.2 kW – 4-pole gear motor, steel shaft and flight, bearings, and supports; - No. 1 rotary airlock valve, complete with 1.5 kW – 4-pole gear motor, steel shaft, and rubber blades; - No. 1 high-level indicator; - No. 2 transparent PVC inspection windows; - No. 1 Ø200 mm tee connection complete with anti-clogging micron vent; - New galvanized bolts, nuts, and sealing gaskets for future reassembly.

Condition: used, Year of construction: 2015, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 6193, type of input current: three-phase, Complete recycling plant available for sale, comprising a Lindner Micromat 2000 industrial shredder together with Godswill baling equipment, conveyors, control systems and associated plant. Itedpfx Ajz Eh Ihep Don This is a substantial industrial recycling setup, previously used for processing waste paper/cardboard and producing compact, baled material. The plant is being offered as a complete package and represents an excellent opportunity for a recycling operator looking to acquire a ready-made processing system. Main equipment includes: * Lindner Micromat 2000 industrial shredder * Manufactured in 2015 * Machine No. 6193 * Motor power 132 kW * 400V / 50Hz * Manufactured in Austria * Godswill GB-1108F baling press * Manufactured 2009 * Series No. 982472 * 40 HP * 415V / 50Hz * 72A * Additional Godswill paper machinery/baling equipment, with a machine rated at approximately 80 HP * Hydraulic systems and associated equipment * Feed and discharge conveyors * Electrical control panels and operator controls * Safety/emergency-stop systems * Material handling and associated ducting/extraction equipment * Complete interconnected plant infrastructure as shown in photographs The machinery has all paperwork from new and installation. Low hours. All services completed and Documented. Ideal for: Waste paper and cardboard recycling • Material recovery facilities • Recycling companies • Waste processing operations • Industrial baling and shredding applications Sold as a complete plant/package.

Condition: used, mileage: 84,939 km, power: 121 kW (164.51 HP), first registration: 08/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 6,300 mm, total width: 2,180 mm, total height: 2,300 mm, loading space length: 2,912 mm, loading space width: 2,106 mm, loading space height: 400 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1355. 2V28657 ----EQUIPMENT * Fixed trailer coupling * Exterior mirrors for a width of 2.20 m, electrically foldable * Air conditioning * Platform body, loading dimensions 2912x2106x400mm * Radio with BT and DAB+ - steering wheel remote control - USB port - four speakers * Seats: 3 seats with fabric upholstery (Selection) - driver's seat with 6-way manual adjustment (length and backrest angle) with lumbar support - double passenger seat with foldable seat back and rotating table - headrests, height-adjustable, front - three-point safety belts on all seats (belt force limiter in the front, double belt pretensioners in the front, warning sound and light for unfastened belts in the front) * Anti-lock braking system (ABS) with cornering brake control and brake assist * Storage compartments - storage compartment in the front doors - beverage compartment in the dashboard on the right (cooled with air conditioning) - glove compartment, not illuminated * Storage: cup holder with clipboard * Airbag, driver side * Exterior mirrors, electrically adjustable and heated * Exterior mirror housings in black * Battery discharge protection Itsdpez Hg Rkjfx Ap Dsn * Hill start assist * On-board computer * Brake light, adaptive * Tachometer * Three-point safety belts on all seats - belt force limiter, front - double belt pretensioners, front - warning sound and light for unfastened belts, front * ESP, electronic stability program * Omission: interior rearview mirror * Power windows, front * Speed limiter and cruise control * Transmission: 6-speed manual * Fuel tank 90 liters * Paintwork: solid color * Steering wheel: comfort steering wheel * Heating and ventilation system with particle and odor filter, front * Particle filter: diesel particulate filter * Side impact protection * Power steering, speed-dependent * Steering column: safety steering column, longitudinally adjustable * Seats: 4 seats in the 2nd row including 4 headrests * Sun visors, driver and passenger * Start/Stop system * Daytime running lights * Traction control with engine and brake intervention (TC Plus) * Conversion socket - 15-pin connector - located at the base of the right B-pillar * Immobilizer * Central locking with remote control ... and more ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any questions? We will be happy to advise you!

Condition: used, functionality: fully functional, Raimann KS310 multi-blade saw with material handling system Max. cutting width: 310 mm Max. feed width: 650 mm Max. cutting height with multi-blade equipment: without pressure plate 120 mm, with pressure plate 105 mm Min. cutting height: 10 mm Min. workpiece length: 450 mm Chain width: 340 mm Saw mandrel diameter: 65 mm Itsdpfx Apoz Hi Sws Den Arbor diameter: 80 mm Diameter of circular saw blade: 250-360 mm Saw mandrel speed: 3900 rpm Feed speed, continuously variable: 4–45 m/min Main motor: 37 kW Outfeed table with side discharge and material return to the operator Technical documentation and CE certificate Dimensions: 640x370x180 cm (H)

Condition: used, Year of construction: 2009, Overview GEA Procomac Opera palletizing unit from 2009, sold as a complete end-of-line group: low-level infeed palletizer with all pallet conveyors, pallet magazine, mother pallet station, Robopac stretch wrapper and Logopak pallet labelling. The Opera is a low-level infeed palletizer for low to medium production capacities, with automatic changeover for different pallet patterns and pallet sizes. Still in production in Germany until October 2026. Technical data - Year of manufacture: 2009 - Design: low-level infeed palletizer - Changeover: automatic, for different pallet patterns and pallet sizes - Output range: low to medium production capacities - Handled at the site: shrink-wrapped PET bottle packs - Pallet handling: infeed and discharge pallet conveyors, pallet magazine, mother pallet station - Machine guarding: mesh safety fencing with access gates around the cell Scope of delivery - GEA Procomac Opera palletizer - Complete pallet conveyor system Iodpfx Aez Dxtxop Djtn - Pallet magazine - Mother pallet station - Robopac stretch wrapping machine - Logopak pallet labelling system Condition Still installed and under power, in production until October 2026. Inspection under power by appointment. Availability From 1 October 2026. Location: Germany.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 2,000 kg, quill stroke: 400 mm, distance table to quill: 215 mm, workpiece length (max.): 920 mm, workpiece width (max.): 550 mm, workpiece height (max.): 550 mm, overall weight: 4,000 kg, Sinker EDM machine GF AgieCharmilles Spirit 4 Year of manufacture: 2008 Travel ranges (X/Y/Z): 700 x 500 x 400 mm Max. workpiece dimensions: 920 x 550 x 370 mm Max. workpiece weight: 2000 kg Distance table - quill: 215 - 615 mm Bath level up to 415 mm Includes pneumatic chuck of the 3R system or Erowa ITS 50 (customer’s choice) Includes 15-position electrode changer in magazine Max. electrode weight: 80 kg Ijdpfxez D Apde Ap Dstn Includes C-axis with U = 0-40 rpm Total weight (without dielectric fluid): 4000 kg Dimensions: 3000 x 3000 x 2865 mm After receiving your order, the machine will be cleaned, serviced, and tested by us. We would be pleased to offer you the following additional services and products: - Commissioning - Transportation - Training - Clamping devices - Dielectric fluid - Cooling unit

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, total height: 1,900 mm, overall weight: 2,700 kg, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Itedpfxsz Dth Ro Ap Den Additional equipment • Voltage: 400 V • With automatic feed • Residue bunker • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Extra Information Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Machine Depth 4800 mm

Condition: used, Year of construction: 2004, Overview This Robino & Galandrino ZENITH Z 2/16 OTTICO is a rotary capsuling machine for sparkling wine bottles, built in 2004. It places and crimps capsules onto 750 ml glass bottles, with optical spotting so that a printed capsule is aligned to the bottle before crimping. The machine is laid out as a two-turret unit: a capsule distributor turret feeding a 16-head rotary crimping turret, rated at 12,000 bottles per hour. It is still installed and under power, remains in production until end of January 2027, and can be visited in operation on request. Technical data - Manufacturer: Robino & Galandrino Ijdpfxoz Dtndj Ap Djtn - Model: ZENITH Z 2/16 OTTICO - Year of manufacture: 2004 - Machine type: rotary capsuling machine for sparkling wine bottles - Configuration: 2 turrets, 16 crimping heads - Capsule spotting: optical - Capacity: 12,000 bottles per hour - Container: glass, 750 ml sparkling wine bottles - CE marked Equipment - Automatic capsule magazine with inclined slat elevator feed - Optical spotting station for pre-printed capsules - Full safety enclosure with transparent doors and emergency stops - Bottle infeed and discharge handling with star wheels and guide rails Condition Used - still installed and under power, in production at the current site. Availability From end of January 2027. Location: France. Sold EXW; dismantling, handling and truck loading are not included.

Condition: good (used), travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 200 kg, table width: 300 mm, overall weight: 800 kg, type of input current: three-phase, table length: 600 mm, workpiece length (max.): 400 mm, Fast-Hole EDM Brand: Tecnosystem Model: D3-DM FAGOR 3-Axis NV 300E Coordinate Display Travel: - X-axis: 350mm - Y-axis: 250mm - Z-axis: 350mm Electrode rotation speed: 200 rpm Head travel: 200mm Table dimensions: 600x300mm Maximum workpiece weight: 200kg Dielectric fluid capacity: 200L Drilling capacity: Drill/electrode diameters from 0.3mm to 6.3mm. Maximum electrode length: 400mm Weight: 800kg The Tecnosystem D3-CM is a fast-hole EDM machine (or EDM drilling machine/super-drilling machine). In machining workshops, it is commonly used as auxiliary equipment for wire cutting to create the initial holes through which the cutting wire is subsequently passed. Function: Fast drilling using an electric arc on conductive materials (hardened steels, etc.) using rotating tubular electrodes made of brass or copper. Itjdpfx Asz Dt Ukjp Don Key applications: Drilling threading holes for EDM wire, extracting broken taps, and creating small cooling or ejection holes in molds and dies. System: High-pressure injection of dielectric fluid through the tubular electrode.

Condition: ready for operation (used), Year of construction: 2005, number of axes: 4, This 4-axis INGERSOLL Gantry 400 was manufactured in 2005. It features a main voltage of 400 V and operates at a frequency of 50 Hz. The machine is equipped with a Multipulse64 control system, ensuring precision in die-sinking applications. If you are looking to get high-quality die-sinking capabilities, consider the INGERSOLL Gantry 400 machine we have for sale. Contact us for further details. • Control system: Multipulse64 • Electrical specifications: • Main/operating voltage: 400 V (3-phase) • Frequency: 50 Hz • Control voltage: AC / 24 V DC • Current consumption/power input: 15 A Iedpfx Apsz Dv I Ts Dotn • Max. backup fuse: 25 A

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning diameter: 1,270 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 5 rpm, spindle motor power: 30,000 W, rotational speed (min.): 5 rpm, rotational speed (max.): 6,000 rpm, total height: 5,000 mm, total length: 8,000 mm, workpiece weight (max.): 6,000 kg, torque: 190 Nm, overall weight: 22,000 kg, spindle nose: HSK100, Equipment: documentation/manual, rotational speed infinitely variable, The spindle was completely overhauled in 2025! The invoice for the spindle overhaul is attached. TECHNICAL DETAILS General Information Manufacturer: Konrad Seidler Model: MINIMAX 1800 Year of Manufacture: 2013 Machine Type: CNC rotary table turning, boring, and milling center Operating Mode: Single-shift operation Machine Weight: approx. 22,000 kg Control and Drive Control System: Siemens 840D SL Drives: SINAMICS 120 Turning Range and Rotary Table Turning Diameter: 500–1,270 mm Rotary Table Load Capacity: 6,000 kg Rotary Table Speed: 5–500 rpm Boring and Milling Spindle Boring/Milling Spindle Power: 30 kW Torque: 190 Nm Boring/Milling Spindle Speed: 2–2,500 rpm Boring/Milling Spindle Speed: max. 6,000 rpm Tool Holder: HSK100 Tool Changer Tool Changer: 16 tools Coolant System Coolant Pressure: 6 bar High-Pressure Coolant Pressure: 30 bar Chip Conveyor Chip Conveyor: Cross conveyor, discharging to the left Discharge Height: 1,200 mm Machine Enclosure Enclosure: Double sliding door Work Area: Walk-in Spindle Overhaul Year of Spindle General Overhaul: 2025 Investment Costs: 36.5 thousand EUR EQUIPMENT Chip Conveyor Walk-in Work Area High-Pressure Coolant System Tool Changer with 16 Positions HSK100 Tool Holder Double Sliding Door Operating Manuals Installation Documents Wiring Diagrams, partially available Documentation of Machine Components Documents for the Control System Documents for the Chip Conveyor Other Original Documents from Commissioning Documents for the Spindle Overhaul Test Report of the Spindle Overhaul Extensively Overhauled Capellini High-Performance Spindle Renewed Precision Bearings Renewed HSK100 Clamping System Renewed Balluff Sensors Refurbished Spindle Shaft Renewed Wear Parts Itsdpsz Hmhiofx Ap Djn Finely Balanced Spindle according to ISO 1940 System-Balanced Spindle Assembly Chuck and Jaws

Condition: new, functionality: fully functional, Excavator for sale ▶️Operating weight approx. 1.6 tons ▶️Dimensions (L x W x H): approx. 1.5 x 0.9-1.1 x 2.7 m ▶️3-cylinder Kubota D902 engine with 21.9 hp ▶️Diesel engine ▶️Articulated arm, adjustable to the right and left ▶️Hydraulic lines for hammer Iedpfez N Dv Rsx Ap Dotn ▶️Hydraulic lines for grapple ▶️Includes 30 cm bucket ▶️Includes excavator thumb ▶️Wider rubber tracks, 230 mm wide ▶️Overall width 95 cm ▶️Adjustable undercarriage width from 95 cm to 110 cm ▶️Digging depth approx. 2 m ▶️Discharge height approx. 2.70 m Optional: ▶️Quick coupler ▶️100 cm ditching bucket, hydraulically adjustable to the right and left NOW ONLY €9,900.00 net +19% VAT €1,881.00 Gross €11,781.00 Subject to errors Images/description may vary

Condition: used, *Filter area: 3 m2 Installed power: 2,45 kW Horizontal disk filter with manual discharge system* This filter uses the horizontal disc system, the only type able to ensure the panel is undamaged even by accidental interruptions in filtration. There is no risk to the panel even in the event of incorrect operation or power cuts. The liquid in the vessel, batching unit and pipes is filtered perfectly at the end of work using a special disc for the purpose. The special filter unit used means that cleaning can be carried out simply using a jet of water and the sped al chute supplied. Manufactured in stainless steel throughout, including the feed pump, pipes, valves and caster-mounted frame. Complete kieselgur batching system with vanable delivery piston pump and stainless steel tank with built-in electric mixer. Itsdpfx Aez N Euhop Dsn Electric panel complete with every control and safety device required for safe, dependable operation.

Condition: used, first registration: 09/2018, Year of construction: 2018, Ardor SVM 38m³, cement/silo semi-trailer, 3 chambers, Alcoa In good condition! Iodpfxozlxlms Ap Djtn • ABS / EBS • Lift axle • Disc brakes • 3 x air-suspended SAF axles • Lifting/lowering system • 3 chambers • 3 x dome lids • Direct discharge to the rear • Working pressure: 2 bar • Test pressure: 3 bar • Vehicle outer dimensions: 7,700 x 2,550 x 3,900 mm • GVW: 39,000 kg • Payload: 32,510 kg • Tare weight: 4,490 kg • Alcoa aluminum wheels • Tires: 385/65 R22.5 • Tread depth: 13/11 / 13/13 / 13/12 - German semi-trailer! - First owner - TÜV / Inspection: available on request and for an extra charge: new! Errors and prior sale excepted! = Further information = Tare weight: 4,490 kg Reserved: This vehicle is reserved for a customer (subject to sale).