Used Dmg Dmc 635 V for sale (390)

Condition: excellent (used), Year of construction: 2024, x-travel 750 mm y-travel 600 mm z-travel 520 mm B-axis (table) - 10°/+95° Grad c-axis 360° Grad table surface area Ø 800 x 620 mm control Heidenhain TNC 620 spindle turning speed - stepless 20 - 15.000 U/min power capacity - milling spindle 20 / 14,5 kW max. torque on the milling spindle 121 / 84 Nm rapid traverse 30 m/min tool change unit 60 Werkzeuge tool taper SK40 table load 350 max. kg total power requirement 35 kVA weight of the machine ca. 11 t Guedpfxs Ai Ucaj An Eoi dimensions of the machine ca. 6,5 x 4,5x 3,0 m Five-sided machining center with ROBO2GO Milling robot in excellent condition. The ideal machine for minimally staffed shifts, right down to single-part production! (Can also be used as a stand-alone machine) The machine has only 2,850 spindle hours and is equipped as follows: * Heidenhain TNC 620 3D control with 19" screen * electronic handwheel * direct position measurement system (X, Y, Z) * Universal milling head with controlled B-axis * SK40 motor spindle, 15,000 rpm, 20 kW * Tool magazine (carousel), 60 positions * HEIDENHAIN TS 460 touch probe for workpiece measurement with optical signal transmission * Tool measurement in the work area: Blum Laser NT-Hybrid * BLUM laser probe for measuring tool length and diameter * Pneumatic control system for the clamping device, mounted on the machine table * SCHUNK KSP plus 160 pneumatic vise * Blowing air can be activated through the center of the spindle * Electronic handwheel * through the spindle coolant (40 bar) with paper-tape filter system * Chip conveyor _____ * Flexible workpiece loading and unloading system with a 6-axis industrial robot - Interchangeable workpiece magazine, including workpiece trays - Max. 42 parts up to 100 x 100 mm - Max. 9 parts up to 200 x 200 mm - Max. tray load: 700 kg - Max. robot payload: 25 kg * 2-jaw gripper for rectangular workpieces - Gripping range with jaw adjustment system: 20–195 mm - Min. workpiece height: 20 mm - Gripper stroke: 6 mm per jaw * Drawer storage: - For increased capacity and loading/unloading of workpieces during active production time Includes 15 touchscreen - Each drawer can be loaded with different jobs via the software - Number of drawers: 3 (+ 2 optional) - Max. workpiece height with 3 drawers: 250 mm - Max. workpiece height with 5 drawers: 100 mm - Max. load per drawer: 300 kg - Includes safety fence with light curtain - Inlay for up to 22 parts, up to 100 x 100 mm, for drawer storage The machine can be inspected under power!

Condition: excellent (used), Year of construction: 2023, operating hours: 2,031 h, functionality: fully functional, machine/vehicle number: 9088000015A, feed length X-axis: 1,100 mm, feed length Y-axis: 550 mm, feed length Z-axis: 510 mm, controller model: Sinumerik One, workpiece weight (max.): 1,700 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,700 kg, overall weight: 6,950 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 2,031 h, spindle nose: SK40, number of slots in tool magazine: 24, Equipment: documentation/manual, We offer the transfer of a lease (cession) for a used DMG MORI M2 milling machine, including its accessories, for 1 EUR. Machine type: M2 Serial number: 9088000015A Year of manufacture: 2023 (first start-up: end of December 2024) Spindle speed max: 10,000 rpm Weight: 6950 kg X/Y/Z: 1100×550×510 mm Table: 1400×600 mm Spindle: up to 10,000 rpm SK40 Sinumerik One High rigidity thanks to a monoblock bed and a fixed table (maximum load 1700 kg) Included with the machine: 19 toolholders with shanks (mainly Tungaloy), 2 AUTOWELL ATW-689 vices from April 2026, and a tester (all accessories for 1 EUR). First owner Price: LEASE TRANSFER Transfer fee: 0.00 EUR Lease payment: 1340 EUR/month Total amount of payments (24-72) remaining: 64,320 EUR Final buyout amount: 4200 EUR. Guedpoz Hl Ihjfx An Eji Loading costs will be covered by us. The price stated in the advertisement represents the total value of the lease agreement. THIS OFFER IS VALID ONLY UNTIL 15.11.2026.

Condition: excellent (used), Year of construction: 2021, operating hours: 27,790 h, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 9,540 h, spindle nose: HSK-A63, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling center universal Manufacturer: DMG MORI Model: DMU 50 3rd Year of manufacture: 2021 Control system: Celos with Siemens 840D sl Operate Technical Specifications: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main Spindle: Speed range – main spindle: 20–20,000 rpm Drive power – main spindle (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Tool Changer: Tool holder: HSK-A63 Number of tool positions: 30 pos. Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 27,790 h Spindle hours: approx. 9,540 h Technical Features & Accessories: Gusdpfxo Ain Rno An Eoi - Active spindle cooling - Direct position measurement system in x, y, z, b, c - Internal coolant supply, 20 bar, consisting of: - 245-liter tank - Spindle rotary joint - Chip conveyor - Cab roof - Coolant/blow-off air switch - Flushing gun for chip flushing - Infrared probe, Renishaw PP60 (if available) - Laser tool measurement - Preparation for 3D quickSET - Operating mode 4 - Electronic handwheel - PROFIBUS automation interface, automatic loading via operator door, 2-channel safety circuits - Prepared for robot-side control of the clamping system, including 4-way rotary feedthrough - Machine-side automation software interface for connection to a master computer (Siemens CMI) Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information.

Condition: used, DMG HSC 55 linear is a 5-axis machining center designed for precision, high accuracy and reliable performance. Travels X 450 mm, Y 650 mm, Z 460 mm; A-axis -10/+110°; tool magazine 120 places; tool Ø max 80 mm, length 250 mm, weight 6 kg; spindle taper HSK 63. Spindle speeds 2–28,000 min⁻¹; spindle power 38/28 kW; supply 3x400 V 50 Hz; total power 70 kVA; machine weight ≈9500 kg; dims L3210×W2930×H2900 mm. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and toolmaking. Gedj Adzdgjpfx An Eoui

Condition: good (used), Year of construction: 2016, operating hours: 31,500 h, travel distance X-axis: 950 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table load: 1,000 kg, operating hours of spindle: 11,300 h, number of slots in tool magazine: 60, tool length: 420 mm, tool weight: 8,000 g, CNC- milling center universal Manufacturer: DMG MORI Model: DMU 95 monoBlock Year of manufacture: 2016 Control system: Heidenhain TNC 640 Technical Specifications: Travel ranges: X-axis: 950 mm Y-axis: 850 mm Z-axis: 650 mm C-axis: 360° A-axis: +/- 120° Main spindle: Tool holder: HSK-63A Speed – main spindle: 20,000 rpm Drive power – main spindle (40/100%): 35 / 25 kW Gujdpfj Ai Ehtex An Eji Torque: 130 / 86 Nm Rotary table: Table dimensions: C-axis d850 x 750 mm integrated into rigid table 1,000 mm x 750 mm Max. table load: 1,000 kg Tool changer: Number of tool positions: 60 pos. Max. tool diameter: 80 / 160 mm Max. tool length: 420 mm Max. tool weight: 8 kg Tool-to-tool change time: 5.9 s Feeds: Rapid traverse (x/y/z): 40 m/min Feed rate (x/y/z): 40,000 mm/min Operating hours: approx. 31,500 h Spindle hours: approx. 11,300 h Technical Features & Accessories: - MPC Machine Protection Control - Production package: - Scraper belt chip conveyor with coolant unit, 600-liter tank, - Paper belt filter - Internal coolant supply, 40 bar / 23 l/min, through the spindle center (OD) - External coolant supply, 4 bar – 40 l/min - Chip flushing in work area door - Rotating viewing window - Cooling system with blown air through the center of the spindle - Infrared probe, Heidenhain TS 649, if installed - 3DquickSET preparation - Operating mode 4 Accessories, tools shown, and clamping devices are included in the scope of delivery only if noted in the additional information.

Condition: used, Year of construction: 2017, DMU50 3rd with Heidenhain TNC640 Guodj Ai H Ryopfx An Esi The machine is in very good condition. Immediately available. Operating hours: Program run: 23,940 h Control: Heidenhain TNC640 Travel: X-axis: 650 mm, Y-axis: 520 mm, Z-axis: 475 mm B-axis: -35 / + 110 C-axis: 360 Spindle speed: 20 - 15,000 RPM Spindle mount: Sk40 table size: D 630 x 500 mm tool magazine: 30 pos. Spindle cooling: separator spindle cooler chip conveyor: Yes probe: Heidenhain TS649 electric handwheel: Yes operating mode: 4

Condition: excellent (used), Year of construction: 2018, operating hours: 3,843 h, functionality: fully functional, machine/vehicle number: 320000620, turning length: 1,240 mm, turning diameter over cross slide: 480 mm, turning diameter: 480 mm, spindle motor power: 33,000 W, spindle speed (max.): 3,250 rpm, spindle bore: 115 mm, travel distance X-axis: 307 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, mount diameter: 315 mm, rotational speed (max.): 3,250 rpm, rotational speed (min.): 20 rpm, torque: 630 Nm, bar passage: 102 mm, workpiece weight (max.): 150 kg, feed rate X-axis: 30 m/min, feed rate Y-axis: 22 m/min, feed rate Z-axis: 36 m/min, total height: 2,150 mm, total length: 4,800 mm, chuck outer diameter: 315 mm, total width: 2,100 mm, collet bore: 102 mm, bar diameter (max.): 102 mm, quill stroke: 120 mm, quill diameter: 100 mm, quill travel distance: 1,200 mm, swing diameter over cross slide: 480 mm, spindle nose: A2-8, swing diameter over bed slide: 700 mm, overall weight: 7,200 kg, spindle diameter: 140 mm, tool length: 250 mm, feed force X-axis: 7,000 N, feed force Y-axis: 7,000 N, feed force Z-axis: 11,000 N, turning diameter over bed slide: 700 mm, Equipment: rotational speed infinitely variable, For Sale: DMG MORI CLX 550 CNC Lathe (Model 2018) High-performance 4-axis turning center in excellent condition, ideal for heavy-duty and precision machining. Equipped with key factory options for maximum efficiency and versatility. Control System & Software: CNC Control: DMG MORI SLIMline® 19" Touch Control with Siemens 840D sl Operate Software Option: Integrated DXF Reader for fast, direct import and programming of 2D CAD files Key Technical Specifications & Features: Gujdpfxo Agvvge An Eoi Year of Manufacture: 2018 Control Unit: 4-Axis Configuration Bar Passage / Capacity: Extended Ø 102 mm passage option Spindle Speed: Up to 3,250 rpm Spindle Torque: 630 Nm (40% ED) Turning Capacity: Max. turning diameter Ø 480 mm | Max. turning length 1,240 mm | Swing over bed Ø 700 mm Tailstock Setup: Includes base and hydraulic interface preparation for steady rest Included Accessories & Tooling Package: Tool Setter (Automatic tool measuring probe) Part Catcher & Bar Puller Bar Feeder Interface / Preparation Driven Tooling Included: 1x Angular Driven Tool Holder (90°) 4x Straight Driven Tool Holders Collet Chucks: 2x ER32 & 2x ER40 Clean, well-maintained machine ready for immediate production.

Condition: excellent (used), Year of construction: 2023, Great opportunity to purchase this high-end CNC turning machine with driven tools, Y-axis and counter-spindle. This machine was built in 2022, but installed and first used in February 2023. Only 1545 actual operating hours on the counter. Including: Subspindle and Y-axis Built-in Motor Turret with 12 tool stations Chip conveyor Manual in-machine tool presetter (pivoting type) Manual in-machine tool presetter (removable type) (Spindle 2) Standard Workpiece Unloader (Built-ln Type) Coolant system with increased pressure of 5 bar Full technnical specifications available in the attached document. Gujdpfx Ans Aigt Rs Eji Optional: set of tooling and tool holders (availability is to be discussed) This machine is in very good condition and can be inspected in operation in Belgium. Immediately available for delivery. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 2015, Ref. -No.: 10716 Manufacturer: DMG MORI Type: CTX alpha 500 Year of construction: 2015 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Germany Turning Diameter: 500 mm Turning Length: 470 mm Speed range - main spindle: max. 5.000 min/-1 Number of tool stations: 12 Piece Tool Taper: VDI 30 X-Axis: 260 mm Z-Axis: 550 mm Weight Of The Machine Ca.: 4.8 t Further information: Gedpfj Ahw R Eox An Eoui Including chip conveyor, transport securing equipment, documentation and accessories. The machine has been cleaned and can be inspected under power.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG Mori M1 milling machine (version with 12,000 rpm, spindle cooling). Year of manufacture: 2022. Very good condition, inspected by DMG service. Low operating hours, only 1,316 spindle hours. Machine can be connected and tested on-site. Gedpfxjzr Rugo An Esui

Condition: ready for operation (used), Year of construction: 2004, operating hours: 31,960 h, controller manufacturer: HEIDENHAIN, number of axes: 2, This 2-axis DMG GILDEMEISTER CTX 320 linear V3 was manufactured in 2004. A versatile turn-mill centre, it offers robust construction and precision for complex machining tasks. If you are looking to get high quality turning and milling capabilities consider the DMG CTX 320 linear V3 machine we have for sale. Contact us for more information. Additional equipment • Bar package with a pick-up device and parts conveyor belt • Bar guide for 1.5 metre bars and workpiece stop • Hainbuch SK 65 clamping top • Indicator light for machine's operating status • Cooling unit for air conditioning the control cabinet Guodpfox Nr T Uex An Eoi • OPTIONAL: A basic tool kit / A large selection of Hainbuch SK 65 clamping heads Machine Benefits Technical Machine Benefits • 12-position tool turret with driven tools at all stations Extra Information Machine still under power

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 500 mm y-travel 450 mm z-travel 400 mm Control Heidenhain iTNC 530 tool taper HSK 63 Gujdpfj Ahn Hysx An Eei total power requirement 34 kVA weight of the machine ca. 4810 kg Accessories oil-mist-extractor Additional information Operating hours: 89.800 Spindle hours: 43.800 Machine with new milling spindle, replaced 2026. CNC control: Heidenhain iTNC 530 Equipment and accessories: Pallet changer (Automation PH 150/8) 60-position tool changer Electronic handwheel HR 410 Touch probe (TS) Chip conveyor Internal coolant supply system Oil-mist-extractor Machine without tool taper and clamping devices.

Condition: good (used), Year of construction: 2007, Ref. -No.: 10726 Manufacturer: DMG GILDEMEISTER Type: GMX 300 linear Year of construction: 2007 Type of control: CNC Control: Siemens 840D powerline Storage location: Halberstadt Country of origin: Germany Guedj Aka Hqepfx An Eoi C-axis speed: 5000 RPM Travel quill: 1500 mm Turning Diameter: 640 mm Swing Diameter: 640 mm Tool Taper: HSK63-A Spindle Speed Min.: 12.000 RPM Rapid Travel Speed X-Axis: 16 m / min Rapid Travel Speed Z-Axis: 40 m / min Travel -X Axis: 1500 mm Main Drive: 25/35 kW C-Axis For Work Spindle: Torque: 390 Nm Spindle distance: 1930 mm Spindle 1 chuck diameter: 200-315 mm Spindle 2 chuck diameter: 315 mm hydraulic tank: 30 L. coolant reservoir: 1000 L. Coolant tank at chip conveyor: 370 L. Spindle motor drive: 13,2/22 kW Bearing diameter: 80/55 mm Quill holder: 5 MK Flow rate: 20 l/min Further information: The machine is offered including all available accessories and technical documentation. The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Condition: used, Year of construction: 2014, Vertical high-speed machining center Manufacturer: DMG Mori Type: MILL TAP 700 Year of manufacture: 2014 Gusdpoz I Inmjfx An Esi Control system: Siemens 840D SL Travel ranges X/Y/Z: 700 x 420 x 380 mm Spindle speed max.: 24,000 rpm Tool magazine: 15 positions Weight approx.: 4,100 kg Automation with robot Manufacturer: Sontec Type: Sonflex Year of manufacture: 2023 Robot: Fanuc 121126

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 380 mm, spindle bore: 56 mm, turning length: 345 mm, turning diameter: 380 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, overall weight: 4,200 kg, torque: 72 Nm, travel distance X-axis: 166 mm, travel distance Z-axis: 339 mm, DMG Gildemeister CTX 210 for sale, manufactured in 2006. Model V2. Approximately 8,600 operating hours. Guodpfx Ansyw Ndto Eji CNC Siemens 840D, 12-position turret VDI 30. Supplied with a set of collets for the chuck + documentation. Testing possible by appointment. Price includes loading onto the truck of your transport company.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 7717000257A, overall weight: 1,550 kg, load capacity: 1,500 kg, input voltage: 400 V, input current: 20 A, type of input current: three-phase, Equipment: documentation/manual, DMG Mori PH150 Pallet Handling System (2023) – 4 Station –Very Low Use 2023 DMG Mori PH150 automatic pallet handling system in excellent condition with minimal prior use. Available immediately. Currently in storage and ready for installation into a new facility or existing machining cell. Specification: 4-position pallet handling system 4 x pallets included 1 x Pneumatic chuck for machine bed Pallet size: 500 x 500 mm Max pallet load: 250 kg Max load per level: 1,500 kg Axis travel: X 2,170 mm / Z 75 mm / C 360° Power supply: 400V Condition: Installed 2023 Very low usage prior to decommissioning Stored in good condition Not currently installed or under power Key Benefits: Significant saving vs new Immediate availability (no OEM lead times) Ideal for increasing spindle utilisation and automation capability Compact, high-efficiency pallet system Important Information: Equipment is currently in storage and not commissioned Sold as seen Buyer responsible for transport, installation and commissioning Assistance with loading can be discussed if required Additional Information: Godpfx Aeyvhuhjn Eeui Second identical unit also available if required Viewing can be arranged by appointment Specification and details are provided in good faith but are not guaranteed. Buyers are encouraged to verify all details prior to purchase.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Guodoymcvmspfx An Eoi Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2017, Manufacturer: DMG MORI, Type: DMU 75 monoBLOCK, Year of manufacture: 2017, Serial number: 12430007443, Operating hours: 28,368, Spindle hours: 11,627, Control system, Manufacturer: Heidenhain, Type: iTNC 530, 21" Operator terminal ERGOline Touchscreen, Tool changer, 63-position SK 40, Travel range X/Y/Z: 735 x 650 x 560 mm, Spindle speed max.: 12,000 rpm, Machine table clamping area: 1,000 x 650 mm, Coolant system, Oil mist extraction, Chip conveyor, Chip cart Guedpfez Tlucox An Eoi +++ IMPORTANT: This machine is part of an online auction! +++

Condition: excellent (used), Year of construction: 2017, operating hours: 7,349 h, turning length: 800 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, spindle motor power: 25 W, overall weight: 8,800 kg, Year of construction: 2017 CNC controller: Fanuc FS31iB (MAPPS IVS) Capacity Turning length mm: 800 Max. turning diameter mm: ø 320 Bar work capacity mm: 65 Upper turret X-axis travel mm: 210 Y-axis travel mm: 110 Z-axis travel mm: 810 Number of tool slots St .: 16 Speed ​​driven tools RPM: 6000 Gujdpfxj Ah Iq Rj An Eei Lower turret X-axis travel mm: 210 Z-axis travel mm: 810 Number of tool slots St .: 16 Speed ​​driven tools RPM: 6000 Main spindle Speed ​​spindle rpm: 5000 Drive power spindle kW: 25/22 Spindle bore mm: 73 Chuck type: 8" Manufacturer: KITAGAWA Counter spindle Speed ​​spindle rpm: 5000 Drive power spindle kW: 25/22 Spindle bore mm: 73 Chuck type: 8" Manufacturer: KITAGAWA Coolant system High-pressure bar: 10 Equipment Chip conveyor Mist collector Chuck foot switch (double) for main and counter spindle Program restart Synchronized tapping Paper band filter Automatic door Robot Automation interface Messenger V4 Working time hours Under power: 7349 Spindle 1: 1370 Rated power kVA: 94 Basic machine dimensions / weight Weight kg: 8800

Condition: used, Year of construction: 2017, Equipment: chip conveyor, Universal Machining Center Manufacturer: DMG MORI Model: CMX 50 U Year of manufacture: 2017 Control system: DMG MORI SLIMline Technical details: X-travel: 500 mm Y-travel: 450 mm Z-travel: 400 mm B-axis: -5 / +110° C-axis: 360° Table dimensions: 630 x 500 mm Rapid traverse: 30 m/min Spindle speed range: 20 – 12,000 rpm Drive power (40/100%): 13/9 kW Tool holder: SK 40 Number of tool stations: 30 positions Operating hours: approx. 11,605 h Spindle hours: approx. 4,061 h Technical features & accessories: - Chip conveyor Guodpfx Ano Agpdne Eji - Internal Coolant Supply (ICS) - Coolant spray gun - Electronic handwheel - Direct measuring system (X, Y, Z axes) - Renishaw probe kit - Oil and emulsion mist separator Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and workholding devices are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2018, controller manufacturer: Heidenhain, controller model: TNC 620, _____ Description: Gsdpfs Ah Ndcsx An Eoui Year of manuf. : 2018 Control : Heidenhain TNC 620 Speed : 12000 rpm Movement X/Y/Z : 500/450/400 mm Tool holder : SK 40 In General: Year of manufacture:2018 Control system:Heidenhain TNC 620 Travel ranges X/Y/Z:500/450/400 mm Spindle speed:12,000 rpm Tool holder:SK 40 Spindle: Technology:Inline direct drive Speed:12,000 rpm Power:13 kW Torque:83 Nm Tool holder:SK 40 NC swivel table: B-axis:+110°/ -5° C-axis:360° Clamping surface:630 x 500 mm Max. table load:200 kg Tool magazine: Technology:Chain magazine Tool changer:Double gripper Number of stations:30 Max. tool length:300 mm Max. tool diameter:80 (130) mm Equipment: Position Sensors:Direct scales on all axes Chip Removal:Chip conveyor Coolant Supply:Internal cooling, 12 bar Workpiece Measurement:Renishaw PP40 infrared probe Tool Measurement:Renishaw TS27R tool probe Kinematics measurement:3D quickSET Setup mode:Electronic handwheel

Condition: used, Year of construction: 2017, operating hours: 21,000 h, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 15,000 rpm, spindle speed (min.): 20 rpm, table width: 1,100 mm, table load: 1,200 kg, table length: 3,200 mm, CNC Bed Milling Machine Manufacturer: DMG MORI Model: DMF 260-11 linear Year of manufacture: 2017 Control: Celos with Siemens 840D sl Operate Main spindle renewed Technical specifications: Travel distances: - X-axis travel: 2,600 mm - Y-axis travel: 1,100 mm - Z-axis travel: 900 mm Main spindle: - Speed range: 20 – 15,000 rpm - Drive power (40/100%): 46 / 30 kW - Torque (40/100%): 200 / 130 Nm - Tool holder: SK 40 Worktable: - Fixed table with integrated rotary table Gujdpfj Agr A Uex An Esi - Clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool stations: 60 positions - Chip-to-chip time: 7.5 s - Power-on hours: approx. 21,000 h - Operating hours: approx. 9,200 h Technical features: - ICS (internal coolant supply) 40 bar - Coolant spray gun - Rotating viewing window - Tropical package - Dynamic package Accessories: - Paper band filter 600l - Chip conveyor - Heidenhain TS 649 DMG touch probe - 3D quickSET - 2x Oil and emulsion mist separators - 4-color signal lamp - Electronic handwheel Accessories, pictured tools, and clamping devices are only included in the scope of delivery if noted in the additional information.

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl - Operate Swivel diameter:540 mm Turning length:1,185 mm Bar capacity:102 mm Main spindle: Technology:Direct drive spindle Speed:4,000 rpm Power:48 kW Torque:680 Nm Bar capacity:102 mm C-axis:0.001° Chuck:Hainbuch Spanntop 100 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Hollow Clamping Cylinder Coolant supply:External (chuck flushing) Sub spindde: Technology:Direct drive spindle Speed:4.000 rpm Power:48 kW Torque:680 Nm C-axis:0.001° Chuck:Hainbuch Spanntop 65 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Partially Hollow Clamping Cylinder 848 mm Coolant supply:External and internal Tailstock function:Mechatronic control of the sub spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on a travelling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:HSK 63 X-axis:450 mm Y-axis:200 mm (+/- 100) Z-axis:1,200 mm B-axis:+/- 110° Position measurement systems:Direct (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm (+/- 40) Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Steady rest:SLU2X turret steady rest, 8–101 mm Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Position sensors:Direct in X1/Y1/Z1/X2/Z2/Z3 Chip removal:Chip conveyor Coolant supply:CTS system, 20 barCoolant Coolant Temperature Control Tool monitoring:Easy Tool Monitor Tool Breakage Monitoring:Swivel Wire Touch Probe:Renishaw Part removal:Part gripper, conveyor belt Bar feeder:Interface Software option I:5-axis simultaneous milling Software option II:Off-centre turning and milling Software Option IV:Gear Cutting and Gear Shaping Software option III:Alternating spindle speed Chucks:2x Hainbuch Spanntop Gusdpfx As Ah Adben Eei :

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC-Steuerung Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX Godpfx Anj Ahmvfo Eeui X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: HSK 63 Numbers Of Tools In Magazin: 60 Spindle Turning Speed - Stepless: 24.000 RPM Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 6,100 kg, number of axes: 4, This 4-axis DMG Mori Seiki NL2500Y/700 was manufactured in 2006. It features a robust control unit, MORI SEIKI MSX-850, and includes an integrated mist extraction unit, chip conveyor, tailstock, turret, and tool setter. With a mass of 6100 kg, this turn-mill centre is designed for high-performance machining. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki NL2500Y/700 machine we have for sale. Contact us for further details. - Phase: 3- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 113 A- Current Rating of the Spindle Motor: 140 A- Interrupting Capacity: 5 kA- Short Circuit Rating: 1 kA- Rated Power: 39 kVA- Mass of Machine: 6100 kg- Control Unit: MORI SEIKI MSX-850- Additional Equipment / Attachments: Integrated mist extraction unit (SARA UC1 SDIV), chip conveyor / chute integration, tailstock, turret, tool setter / probe arm Technical Specification Counter Spindle No Gujdpfxjz A Uz Ne An Eoi Driven Tools Yes