Used Dmg Dmc 835 V for sale (402)

Condition: used, Year of construction: 2004, x-travel 600 mm y-travel 700 mm z-travel 600 mm Control HEIDENHAIN TNC 530 Tool taper SK- 40 Tools changer 120 fach number of spindle speeds 12.000 U/min/rpm Machine on 32.224 Spindle hours 10.850 h weight of the machine ca. 9,5 t dimensions of the machine ca. 5,45 X 3,53 X 2,63 m Cjdpfx Asw Rrcqjfpogn

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, number of axes: 5, This 5-axis DMG DMC 100 H was manufactured in 2006. It features a Siemens 840D powerline control with Shopmill, and robust traverse paths of 1000 mm in X, Y, and Z axes. Equipped with a high-speed range up to 8000 rpm, dual gear stages, and an HSK 100 tool holder with up to 360 positions. Includes two 800x800 mm pallets and a B-axis at 0.001° precision. Contact us for more information about this machine. Additional equipment • Electronic handwheel • Operating mode 4 • Oil mist extraction Cgodsyaau Topfx Afpon • Internal cooling (IKZ): 40 bar • Paper band filter • Measuring probe Renishaw OMP 60 • Chip flushing gun Machine Benefits Technical Machine Benefits • Tool holder: hsk 100 • Tool positions: 270 / 360 • Number of pallets: 2 • Pallet size: 800 x 800 mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D powerline + Shopmill, number of axes: 5, This 5-axis DMG DMC 100 H was manufactured in 2005. It features a Siemens 840D powerline control with Shopmill, a 1,000 mm travel in X, Y, and Z axes, and a speed range up to 8,000 rpm. The machine includes a HSK 100 tool holder, 270/360 tool positions, and two 800 x 800 mm pallets. Consider the opportunity to buy this DMG DMC 100 H horizontal machining centre. Contact us for more information. Additional equipment • Electronic handwheel • Operating mode 4 Csdpfxsyaaugj Afpogn • Oil mist extraction • Internal cooling (IKZ): 40 bar • Paper band filter • Chip flushing gun Machine Benefits Technical Machine Benefits • Number of pallets: 2 • Pallet size: 800 x 800 mm • Tool positions: 270 / 360 • Measuring probe: renishaw omp 60 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre. Contact us for more information. Additional equipment • Tool Changer & Magazine: Horizontal Double Gripper / Magazine Type: Chain Magazine / Capacity: 60 Tool Places / Tool Clamping: According to DIN 69872 / Tool Breakage Control: Mechanical Version • Coolant Tank: 900 L • IKZ: Form AD with Paper Band Filter • Measuring Probe: Heidenhain TS 641 (Infrared) Cedpsyaam Asfx Afpegn • Tool Measurement: Blum Laser for Tool Length & Diameter Measurement Horizontal/Vertical • Rotating Viewing Window Machine Benefits Technical Machine Benefits • Production hours: 54347 operating hours, 3500 spindle hours • Universal milling head with controlled b-axis • Very well maintained machine operated for high-end applications • Spindle replacement in 2021 at a cost of approximately 40000 euros • Checkbook maintained Extra Information Disc changer and 4 pallets are included Control 3D Haidenhein contouring control "Millplus IT with Millplus IT handwheel" Serviced regularly... excellent condition... new spindle has 3,500 hours

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 9 kVA, torque: 82 Nm, controller manufacturer: Siemens, table width: 560 mm, table length: 900 mm, table load: 600 kg, rotational speed (max.): 12,000 rpm, overall weight: 5,200 kg, number of spindles: 1, number of slots in tool magazine: 60, mount diameter: 40 mm, Equipment: chip conveyor, documentation/manual, Vertical machining center DMG MORI SLIMline Multi-Touch Control Table size: 900 x 560 mm Table load capacity: 600 kg Direct path measuring system X, Y, Z Cedpfxew Ei E Ho Afpsgn SK 40 spindle taper 20 bar internal coolant supply 60-position tool changer Chip conveyor Renishaw probing kit for SIEMENS control

Year of construction: 2009, condition: good (used), Horizontal machining center (HMC) DECKEL MAHO - DMC65 H duoBLOCK MACH-ID 7722 Make: DECKEL MAHO Type: DMC65 H duoBLOCK Control: HeidenHain iTNC530 Year: 2009 4 Axis Controlled simultenious New WEISS spindle in 2022 New Window SG Glass BLUM laser measuring Renishaw 3D Measuring taster Filtration and coolant system 600 Liter and 40 bar Specifications Metric US Standard X - Travel 650 mm Y - Travel 700 mm Z - Travel 700 mm B-Axis indexing 360 ° Table Length 450 mm Table Width 500 mm Table load 600 Number of pallets 2 Feed rate X-Axis 60000 mm/min. Feed rate Y-Axis 60000 mm/min. Feed rate Z-Axis 60000 mm/min. Spindle Taper 40 ISO/Bt/Mk Power on spindle 13 kW Speeds / ranges 12000 Rpm ATC / revolver 120 Coolant true spindle / Bar 40 Number of controlled axis 4 Chip conveyor Yes Coolantsystem Yes Cgsdpfx Afsphlviepen Dimensions (Estimate) Length 5900 mm Width 3586 mm Height 2524 mm Weight 11000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, machine/vehicle number: 288-40003902, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, total height: 2,500 mm, total length: 5,000 mm, total width: 3,500 mm, table width: 500 mm, table length: 630 mm, DMG DMC 80 H Hi-Dyn RS4 For sale is a horizontal machining center DMC 80 H hi-dyn RS4. The machine is in good condition. Technical Specifications Travel distances: X-axis: 800 mm Y-axis: 800 mm Z-axis: 800 mm Table data: Table size: approx. 630 × 500 mm Max. workpiece weight: ~1,200–1,400 kg Rotary table: 4th axis, 360° continuous Spindle: Direct drive, liquid-cooled Speed ranges: Automatic mode: 0–6,000 rpm Setup mode: 0–800 rpm Manual mode: 0–5,000 rpm Max. speed: up to 8,000 rpm Spindle power: approx. 20 kW Torque: S1 – 100% duty cycle On request, dismantling, loading, and transport within Europe can be organized for an additional charge. Prices are subject to VAT. Cgodpfx Asx Uq Sajfpsn Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell? For further information or contact options, visit our website.

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, number of slots in tool magazine: 180, Work piece up to 1530 x 1295 x 3500 Kg Tool size up to 650 mm length and 30 Kg Tool size up to 400 x 250 mm and 30 Kg Extende feed rate up to 15 kN-100% ED Coolant Filtration     BLUM Laser NT 3D Quick ser MPC protection 3D Measuring probe DXF Import   Tool package 180 Tool HSK-100A 2 x Cast iron angle plates 1500 mm   15000 Working hours 1e owner machine  X - Travel: 1600mm Y - Travel: 1100mm Z - Travel: 1400mm B-Axis indexing: 360000° Table Length: 1250mm Table Width: 1000mm Table load: 3000 Number of pallets: 2 Feed rate X-Axis: 60000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Spindle Taper: HSK-100ISO/Bt/Mk Power on spindle: 52kW Speeds / ranges: 12000Rpm ATC / revolver: 180 Number of controlled axis:4 Length: 9170mm Width: 6320mm Height: 3969mm Weight: 39500kg Cjdpfjx Sqptsx Afpsgn

Condition: used, Year of construction: 2006, DMG DMC 70H Duoblock + RS4 CNC Machining Centre (2006) Manufacturer: DMG Model: DMC 70H Duoblock + RS4 CNC Machining Centre Year of manufacture: 2006 Condition: Used, powered on and ready for demonstration Power-on hours: 92,800 h Spindle hours: 70,200 h Spindle speed: 18,000 rpm Spindle mount: SK40 Tool magazine: 180 positions Internal coolant supply (IKZ): 40/80 bar Belt filter system Codpfxox S N E Hj Afpjgn RS4 pallet station including 4 pallets. Further information to follow.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Csdjxxn Ukjpfx Afpsgn Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: used, Technical details: x-travel: 800 mm y-travel: 710 mm z-travel: 710 mm speeds:: 6000 U/min Cjdpfox A Szisx Afpegn table:: 500 x 630 mm with tool changer: 40 Plätze spindle taper:: SK 50 total power requirement: 25 kW weight of the machine ca.: 11500 kg

Condition: used, _____ Description: Year of manuf. : 2008 Control : Siemens 840 Speed : 8000 rpm Movement X/Y/Z : 800/800/800 mm Tool holder : HSK 100 In General: Year of manufacture:2008 Speed:8,000 rpm Tool holder:HSK 100 Control system:Siemens 840 D Travel X/Y/Z:800/800/800 mm Table speed:700 rpm Spindle: Technology:Geared spindle Speed:8,000 rpm Max. power:28 kW Max. torque:727 Nm Tool holder:HSK-100 Turning function:Spindle clamping Cgjdjwx A Hqspfx Afpon NC swivel head: Technology:Universal milling head B-axis:0.001° NC- Millturn table: Max. speed:700 rpm Clamping surface:800 x 630 mm Max. table load:800 kg Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system, 80 bar Coolant temperature control:Immersion cooler Position measuring systems:Direct in all axes Automation:2-fold pallet changer Turning function:Spindle clamping + rotary table Workpiece measurement:Preparation for measuring probe Process monitoring:Operating mode 4 Set-up mode:Electronic handwheel Emulsion mist separator:Mechanical separator

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage detection in the machining area Cgjdpsx Icyvofx Afpon -Pallet storage (4 positions) -Pallet sequence operation -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Components Renewed -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Condition: excellent (used), Year of construction: 2012, DMG DMC 1035 ECO Machining Center DMG DMC 1035 ECO with Siemens Sinumerik 810 D powerline control system, year of manufacture 2011, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. CE-compliant!! Technical data: X-axis travel: 1,035 mm y-axis travel: 560 mm z-axis travel: 510 mm CNC control: Siemens Sinumerik 810 D powerline Table size: 1200 x 560 mm Maximum table load: 1000 kg Spindle taper: SK 40 Spindle speed: 10,000 rpm Spindle motor power: 13 kW Feed rate steplessly adjustable: 20,000 mm/min Rapid traverse: 25 m/min Tool changer capacity: 20 positions Coolant system with through-spindle coolant (IKZ): 20 bar Operating voltage: 400 V Total power requirement: 17 kVA Machine weight: approx. 4.1 t Dimensions (L x W x H): approx. 2.55 x 2.30 x 2.25 m Chip conveyor: 3.90 x 0.95 x 1.60 m Equipment: - Control unit: Siemens Sinumerik 810 D powerline - Electronic handwheel - Chip conveyor - Through-spindle coolant (IKZ) 20 bar About the machine: Cgsdpfx Asyat Tvjfpjn Offered here is a DMG DMC 1035 V machining center equipped with a Siemens Sinumerik 810 D powerline control. This machining center is in excellent original condition and was only used for training purposes in a facility. The control system is very user-friendly. The guideways are lubricated regularly via a central lubrication system. The DMG DMC 1035 V has been both mechanically and electrically tested by us. Take the opportunity to view and test the DMG DMC 1035 V under power at our facility. You will find further milling machines from well-known manufacturers on our website.

Condition: used, Year of construction: 2015, x-travel 635 mm y-travel 510 mm Cgedpfjwm Rtbox Afpjn z-travel 460 mm Control DMG

Condition: used, Year of construction: 2002, Universal machining center Machine type: DMG DMC 340 U Control: Heidenhain iTNC 530 Year of manufacture: 2002 TECHNICAL DATA: Travel paths: X-axis: 2,800 mm Y-axis: 3,400 mm Z-axis: 1,600 mm B-axis C-axis Rapid traverse: (X/Y/Z): 60 / 30 / 40 m/min. Swivel head Speed range: 10,000 rpm. Drive power: 44/32 kW Torque: 288 Nm Tool holder: HSK 100 Tool positions: 120 Tool diameter: 130 / 250 mm Tool length: 650 mm Tool weight: 30 kg NC rotary table: 2500 x 2000 Pallet system Number of pallets: 2 Pallet size: 2,500 x 2,000 mm Top table: D. 2,800 Features: Internal cooling (IKZ): bar Cedpsx Uxc Tefx Afpjgn Coolant tank: l Chip conveyor Electronic handwheel Chip flushing gun

Condition: like new (used), Year of construction: 2024, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: CMXV1241149, Fully functional, only 2200 hours. Inspection is available at any time. Feel free to contact, will send you full specification for this machine. Was used at our production, no repairs at all. All paperwork in hands, machine is ready for export. Cgedpfxjygdbqo Afpjn

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, nominal power (apparent): 61 kVA, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 4,000 kg, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, table width: 500 mm, table length: 630 mm, table load: 4,000 kg, overall weight: 12,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 19,500 h, number of slots in tool magazine: 120, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned operation, geometrically within new-machine tolerance. The machine can be inspected and measured on site by arrangement. Machine Data: Machine description: Machining centre with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: good Equipment: - Direct linear measurement in X/Y/Z (glass scales) - Chip conveyor - High-pressure coolant system 40 bar (IKZ) - Extraction unit - NC rotary table - Tool magazine, 120 positions - Heidenhain measuring probe - Rotating viewing window - High-pressure coolant 40 bar - Signal lamp - Chip flushing - Operating mode 4 Technical Data: Number of axes: 5-axis Control: Heidenhain iTNC 530 NC rotary table clamping surface: 500 mm x 630 mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travels and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90°/+12° Cjdpfx Aferxrklepsgn Feed rates and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor spindle: Max. speed: 18,000 rpm Spindle taper: HSK A63 Tool changer: Automatic tool changer: Yes Number of magazine positions: 120 Pallet changer: 5 pallets

Condition: good (used), For sale is a CNC milling machine DMG DMU 50 V with Heidenhain 426/430 control, 5 axes. The item is in good condition. Technical specifications: Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 400 mm Table: NC rotary/swivel table Rotary/swivel axes: B-axis approx. -10° / +95° C-axis (rotation): 360° Max. workpiece weight: approx. 200 kg Table surface: Ø 500 x 380 mm Main spindle: SK 40 (ISO 40) Max. spindle speed: approx. 10,000 rpm Max. tool length: approx. 280 mm Max. tool weight: approx. 6 kg Csdpfjxvzy Uox Afpogn Transport dimensions: 2.45 x 1.76 x 2.38 m Machine weight: approx. 3,500 kg Total power requirement: approx. 17 kW Transport and loading can be arranged Europe-wide for an additional charge, if required. Prices exclude VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE & SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2019, x-travel 3.400 mm y-travel 3.400 mm z-travel 1.600 mm Control CELOS 840D sl Op Siemens max. spindle speed 20 - 15.000 min/-1 power capacity - main spindel 52 / 42 kW tool taper HSK-A100 max. Torque 404 / 280 Nm swivellable B: -30° / +180 ° table diameter 2.500 x 2.000 mm max. table load 10.000 kg table speed 5 min/-1 distance spindle center to table hor.: 130 - 1.730 mm distance spindle center to table vert.: 230 - 1.830 mm distance spindle nose and table hor.: -1.500 - 1.900 mm distance spindle nose and table vert.: -1.600 - 1.800 mm type 5x Rad- / Wheel Csdpfxsx H Tt De Afpegn number of toolpositions 303 pos. max. tool diameter 110 mm max. tool-dia with free toolbox 280 mm max. tool length 900 mm max. tool weight 45 kg tool changing time 7,5 sec tool taper HSK-A100 rapid traverse 60 / 30 / 40 m/min total power requirement 140 kVA weight of the machine ca. 106 t dimensions of the machine ca. 14,0 x 13,0 x 7,0 m 5-Axis-CNC-Heavy-Duty-Machiningcenter Universal DMG MORI - DMC 340 U - Pallet Changer 2 pos. - Accuracy package - MDynamics package (Improved surface finish with reduced machining time) - Only approx. 10,500 spindle hours - Cone cleaning station with rotating brushes - Balluff tool identification - Machine protection via rapid shutdown (MPC) - Laminated safety glass - Machine design for pit installation - Heidenhain linear scales (instead of Magnescale) - Camera remote system with screen on the control panel

Condition: ready for operation (used), Year of construction: 2004, operating hours: 36,700 h, Control Unit Brand SIEMENS Model Sinumerik 840D Powerline Main Drive Number of axis 5 Movement X-Axis Movement 1250 mm Y-Axis Movement 880 mm Csdpfx Aox D Npgefpjgn Z-Axis Movement 800 mm Tools Type of tool holder HSK63 Additional Equipment Infrared Scanner Tool Measurement Flushing Gun Internal Coolant Supply (IKZ): 40 bar Tank with Paper Belt Filter: 900 litres This 5-axis DMG GILDEMEISTER DMC 125U universal machining centre was manufactured in 2004. Ideal for complex and precise machining tasks, it offers enhanced flexibility and performance. Consider the opportunity to buy this DMG GILDEMEISTER DMC 125U universal machining centre. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2016, DMG Mori Ecomill 600 V Year of manufacture: 2016 X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 210 mm Control: Siemens 840D SolutionLine Spindle taper: SK 40 Spindle speed: 12,000 rpm Through-spindle coolant (IKZ) Chip conveyor Table size X: 900 mm Cedpfxox Tn R Do Afpogn Table size Y: 560 mm Max. workpiece weight: 400 kg Tool changer: 30 positions Feed rate: 30,000 mm/min

Condition: good (used), Year of construction: 2004, 5-axis CNC machining center – universal – Manufacturer: DMG Machine model: DMU 160 Control: MillPlus IT Year of manufacture: 2004 TECHNICAL DATA Travel distances - X-axis (mm): 1,600 - Y-axis (mm): 1,250 - Z-axis (mm): 1,000 - A-axis (swivel head): 0 degrees / 90 degrees - B-axis (rotary table): 360 degrees Spindle: Swivel milling head (H/V) - Internal coolant supply (ICS) (bar): 40 - Max. spindle speed (rpm): 10,000 Tool changer: Double gripper Tool magazine: Rack-type magazine - Tool holder: SK50 - Tool positions: 120 Machine table: Rotary table Pallet system: Rotary pallet changer - Number of pallets: 2 - Pallet size (mm): 1,250 x 1,000 Cedpsx Ey N Aofx Afpogn EQUIPMENT FEATURES + Electronic handwheel + Chip conveyor + Coolant spray gun + Rotating viewing window + Operating mode 4 + Air blast through spindle center, selectable via M-function Subject to changes and errors in the technical data and information.

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 21000 kg Main Drive Spindle speed range 18000 Number of axis 5 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 1250 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Workpiece Workpiece weight 2000 kg Csdpfxex D Eh Eo Afpsgn Tools Type of tool holder HSK-A63 This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U duoBlock machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min Cgodpen Srxqofx Afpon total power requirement: 68 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on", *