Used Dmg Dmu 50 for sale (390)

Condition: used, Year of construction: 1999, x-travel 1250 mm y-travel 850 mm Gusdpfjy Ty R Asx An Eoi z-travel 800 mm Control Heidenhain MillPlus

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: Gjdpfow Hg Nlex An Ejui * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: excellent (used), Year of construction: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm control Fanuc MSX-701III Maximum turning diameter 660 mm Guodpfx Asy Spuuon Esi Max. turning length 1498 mm Diameter over cross slide max. 400 mm number of spindle speeds 3000 U/min tool piece magazine with 40 Plätzen turret 10 Fach total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, overall weight: 6,000 kg, number of axes: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Additional equipment • shopturn option Machine Benefits Technical Machine Benefits • Availability from • Weight: 6000kg • 40 kVA • 58 A In max • 63 A • 400 V • 50 Hz • Control system: Siemens Sinumerik 840D Slimline • Main drive: AC main drive 25 / 32 kW • Duty cycle: 100% / 40% ED • Spindle speed: 5000 rpm • Torque: 280 / 360 Nm • Hollow clamping cylinder • 12-position turret with tool holder • Turret diameter: 340 mm • Hinged belt chip conveyor • 4-color status signal light • Air blow through main spindle • C-axis with driven tool system for turret UDI 40 • Drive for all tool stations • Y-axis travel +90 / −65 mm • Linear guideway system • Ball screw spindle • AC servo motor with integrated absolute encoder • Glass scale on guideways • Rapid traverse speed: 30 m/min • Coolant system 8 / 20 bar • Coolant tank capacity: 600 liters • Coolant pump flow rate: 8 bar / 20 l/min • High-pressure pump flow rate: 20 bar / 40 l/min • Coolant supply via turret disk to all turret stations • Band filter system filtration grade: 40 µm • Coolant level monitoring • Integrated working area extraction max. 400 m³/h Godpfx Ansx D Nl Io Ejui • Workpiece probe Renishaw LP2DD • Probe installed at loading and unloading station • Stylus with pneumatically actuated flap and electrical control • Measuring accuracy: 10 µm • Function plate for additional tools • Machine cabinet temperature control max. 40°C • Electrical cabinet cooling unit up to 40°C • Hydraulic oil cooler • Remote diagnosis support via internet • Working area flushing with 3 flushing screw connections • Two separately switchable valves with 8 bar pressure • Workpiece discharge conveyor for part transport system SRA 160 • Workpiece diameter: 100 mm • Continuous workpiece transport system SRA 160 in drag chain design • Storage capacity: 30 workpieces diameter 30–70 mm max 7 kg • Storage capacity: 18 workpieces diameter 30–100 mm max 15 kg • Maximum workpiece height: 160 mm • Maximum total workpiece weight: 320 kg including pallets • Loading height approx. 800 mm • Chain conveyor belt with transport prisms • Drag chain movement controlled by NC axis • Set of drag frames • Workpiece diameter minimum 30 mm maximum 160 mm • Light barrier for workpiece transport system pick-up station • Hold-down device for loading pallets SRA 160 • Robot interface Profinet • Electrical interface for 6-axis robot via Profinet • Power chuck centering and face clamping chuck • Intermediate storage tray supported on function plate • Air blow cleaning for inner workpiece area • Measuring probe with air blow with two nozzles front and rear • Clamping pressure adjustment with motor-controlled valves • Clamping pressure programmable via NC program • Extension of chip discharge chute on chip conveyor by 300 mm • Aluminium machining package • Modified slurry pump on chip conveyor • Forced indexing of band filter • Larger chip container • Extension of plug-in screens from chip conveyor • 3D data model of machine working area in STEP and IGES format • Delivery of 3D model on CD • PLC / SPS source code including hardware configuration of Siemens control in English

Condition: excellent (used), Year of construction: 2008, x-travel 630 mm y-travel 560 mm z-travel 560 mm Control MillPlus HEIDENHAIN table dimension - longitudinal 1000 mm Gjdpfxjvwgp Uj An Esui table dimension - cross 600 mm spindle turning speed range 12000 U/min Number of axles 4 St. rapid traverse 30 m/min tool change unit 24 -fach weight of the machine ca. 9 t The DMU 60 monoBlock is in very good condition and immediately available. Accessories: - Measuring probe

Condition: used, Year of construction: 2001, turning diameter 390 mm centre distance 1850 mm swing diameter 610 mm control SINUMERIK 840D turning speeds 20-4000 U/min spindle bore 79 mm bar capacity 65 mm weight of the machine ca. 18000 kg total power requirement 33 kW Control System Siemens Sinumerik 840D Bed Design: 4-rail bed Guideways: Roller guides Working Area Maximum swing diameter: 610 mm Standard turning diameter: 390 mm Distance between spindles: 1850 mm Traverse travel cross/longitudinal – Slide 1: 605 / 1470 mm Y-axis – Slide 1: 210 mm B-axis – Slide 1: 240° Traverse travel cross/longitudinal – Slide 2: 227 / 1440 mm Longitudinal travel – Slide 3: 1460 mm Turning and Milling Spindle – Slide 1 Number of tools: 80 Tool holder: HSK-A63 Max. spindle speed: 12,000 rpm Max. drive power 40/100% duty cycle: 10 / 15 kW Indexing unit: 1.0° Clamping torque (locking): 500 Nm Spindle 1 – Left Max. bar capacity: 65 mm Spindle nose faceplate: 220 h5 Spindle bore: 79 mm Internal draw tube: 68 mm Front bearing diameter: 140 mm Spindle 2 – Right Max. bar capacity: 65 mm Spindle nose faceplate: 220 h5 Spindle bore: 79 mm Internal draw tube: 68 mm Front bearing diameter: 140 mm Main Drive 1 and 2 – Left / Right Max. drive power 40/100% duty cycle: 25 / 33 kW Speed range: 20 – 4000 rpm Rated speed: 700 rpm Max. torque 40/100% duty cycle: 840 / 460 Nm Drive type / design: AC / 1 Design: Integrated spindle motor C-axis speed (rapid traverse): 100 rpm Gujdpex Tu Sujfx An Eji C-axis torque (holding torque): 350 Nm C-axis indexing accuracy: 0.025° Slide 1 Rapid traverse speed X/Ys/Z: 46 / 24 / 60 m/min Feed force X/Ys/Z: 11 / 16 / 11 kN Position resolution X/Y/Z: 0.001 mm Ball screw X (d × p): Ø40 × 15 mm Ball screw Ys (d × p): Ø40 × 10 mm Ball screw Z (d × p): Ø50 × 25 mm Slide 2 Rapid traverse speed X/Z: 24 / 60 m/min Feed force X/Z: 7.5 / 11 kN Position resolution X/Z: 0.001 mm Ball screw X (d × p): Ø32 × 15 mm Ball screw Z (d × p): Ø50 × 25 mm Slide 3 Rapid traverse speed Z: 60 m/min Feed force Z: 12 kN Position resolution Z: 0.001 mm Ball screw Z (d × p): Ø50 × 25 mm Tool Changer – Turret Head Gripper type: Double gripper Control type: Cam-controlled Tool change time G1/G2: 1.3 / 2.6 s Tool Spindle Speed 4000 rpm Coolant Unit 180 liters

Condition: used, Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Technical Data: Build Volume: 300 x 300 x 300 mm Layer Thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chromium alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium Fiber Laser Laser Type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Weight: 40 kg Cooling: Water Central Wavelength Range: 1070 ±10 nm Modulation Frequency: 0-50 kHz Godpfxozh Dp Ae An Eoui Average Power, max. 600 W Power Adjustability: 10-100% Beam Parameter: 0.37 mm x mrad Condition: used Scope of Supply: (See Image) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,821 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 242 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 540 mm, controller manufacturer: SIEMENS, controller model: SLIM Line, number of axes: 4, This 4-axis DMG MORI CLX 350 lathe was manufactured in 2018. It features a maximum workpiece diameter of 320 mm and a maximum machining length of 530 mm. The machine is equipped with a Siemens SLIM Line CNC and offers an X-axis travel of 242 mm, Y-axis travel of +/- 40 mm, and Z-axis travel of 540 mm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 350 lathe we have for sale. Contact us for further details. • Maximum workpiece diameter: 320 mm • Maximum machining length: 530 mm • Bar capacity: 65 mm • Spindle hours: 236 h • Maximum spindle speed: 5,000 rpm • Spindle power: 16.5 kW • Spindle torque: 168 Nm • Y-axis: ±40 mm • C-axis: Yes • Driven tools: Yes • Counter spindle: No • Automatic Door: No • Probe Arm: No Godpfx Anjzx A Ils Eoui • Hydraulic tailstock • 12-station VDI40 turret with driven tools • 15" SlimLine operator panel • Siemens SINUMERIK 840D SL CNC with ShopTurn • USB and Ethernet connectivity • SMW Autoblok BH-D 250/1220 hydraulic 3-jaw chuck • Chuck diameter: 250 mm • Chuck bore: 66 mm • Hard and soft jaw sets included • 12 VDI40 tool holders • 6 Block Tool boring bar holders with internal coolant • PROGRESSline & Planonlight functions, including cycle time display, remaining time display and parts counter • Chip conveyor: No Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2018, operating hours: 20,876 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 271 mm, travel distance Z-axis: 830 mm, spindle motor power: 25,500 W, overall weight: 5,400 kg, controller manufacturer: SIEMENS, controller model: DMG MORI SLIMline Multi-Touch, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI CLX 450 V3 was manufactured in 2018. It features a maximum turning diameter of 400 mm and a turning length of 800 mm, with an impressive spindle speed of 4,000 rpm. The machine includes a 12-position VDI 40 turret and driven tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V3 horizontal turning machine we have for sale. Contact us for further details. Working capacity and axes: • Axes: X, Z; C-axis on main spindle • No Y-axis; no counter spindle (V3 configuration) • Max turning diameter: 400 mm • Max turning length: 800 mm • Swing over bed: 700 mm • Swing over cross slide: 500 mm • Rapid traverse X/Z: 30 m/min • Direct measuring systems on X and ZMain spindle: • Spindle nose: A2-8 • Bar capacity: 80 mm • Power: 25.5 kW @ 40% duty / 17 kW continuous • Torque: 426 Nm @ 40% duty / 283 Nm continuous • Chuck: Hydraulic 3-jaw BB-D 250/Z220, D 78 mm (as per original offer)Tool turret: • 12-position VDI 40 turret with 6 additional BT stationsDriven tools: Guedpfxez Im N No An Eoi • Max speed: 4,000 rpm • Power: 5.44 kW @ 40% duty • Torque: 20 Nm @ 40% dutyTailstock: • Tailstock travel: 800 mm • Centre taper: MT5 • Max thrust: 8 kN • Tailstock foot pedalIncluded options: • Production package • 12-bar coolant pump • Manual washdown gun for working area • Dual coolant filter • Tool probe in the working area • Preparation for oil mist extraction • Easy Tool Monitoring • DMG MORI Messenger V2 • DMG MORI Netservice client • German screen language and documentationHour meter: • Power on: 38,556 h • Spindle: 20,876 h Technical Specification Counter Spindle No Driven Tools Yes

Year of construction: 2010, condition: ready for operation (used), Turning machine Gedpfx Aoi Ewq Ssn Eeui CTV 250 - R Manufacturer: DMG Gildemeister Serial number: 6860000451 Operating hours: 46,491 Spindle hours: 30,748 Footprint: 4m x 3m Optional cooling unit for connecting two CTV 250 machines

Year of construction: 1999, condition: used, CNC Steuerung Heidenhain TNC 426 Kuehlmitteleinrichtung Spaenewanne CNC control Heidenhain TNC 426 coolant device chip tank Technische Daten / technical details: X-Weg / X-travel 600 mm Y-Weg / Y-travel 525 mm Z-Weg / Z-travel 500 mm Gusdpfx Anedk Rwno Esi Spindeldrehzahlen / spindle speed 6300 UpM /rpm Werkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min. Universaltisch / clamping area of universal table 750x530 mm Gewicht der Maschine ca. / weight 6500 kg

Year of construction: 1995, condition: excellent (used), Travel X/Y/Z: 350 x 240 x 340 mm Guedpfx Aolawavon Eoi Spindle speed 6300 rpm Tool holder SK 40 Manual swivel rotary table tool holder vice Accesories

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,202 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, table load: 800 kg, overall weight: 5,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DMG MORI CMX 800V was manufactured in 2020. It features an X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine has a maximum spindle speed of 12,000 rpm and a robust table load capacity of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 800V vertical machining centre we have for sale. Contact us for further details. • Spindle: • Max torque: 83 / 57 Nm • Working range: • Rapid traverse (X/Y/Z): 30 / 30 / 30 m/min Guodpfx Aez Hb Tasn Eji • Hours (approx.): • Operating: 12,138 h • Machining: 3,202 h

Condition: ready for operation (used), DMG 110498 Monitor with control panel, ID: 2341559, serial number: 506112907, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gedpfx Ano Ahvglj Eoui

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 925 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 3, This 3-axis DMG CTV-250 was manufactured in 2012. It features a maximum workpiece diameter of approximately 350 mm and a chuck diameter of 250 mm. The machine is equipped with a 12-position turret and operates at spindle speeds of up to 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTV-250 vertical turning machine we have for sale. Contact us for further details. • Spindle operating hours: 38,984 h • Axis travels (approx.): X 925–1100 mm; Z 300–350 mm; Y (optional) ±90 mm • Chuck diameter: 250 mm • Turret: 12 positions • Workpiece capacity (model typical): Max diameter approx. 350 mm; max length approx. 200 mm; max weight typically 100–300 kg (depending on setup) • Current configured workpiece diameter (turning): Ø 320 mm Additional equipment • Chip conveyor • High-pressure coolant system with paper filter • Automatic workpiece loading from tray Technical Specification Driven Tools No Gujdpfx Asy T Iaren Eoi

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, total height: 2,935 mm, total width: 5,500 mm, table width: 1,100 mm, table length: 560 mm, table load: 800 kg, overall weight: 5,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 4,800 mm, number of axes: 3, This 3-axis DMG Mori Seiki CMX 800 V was manufactured in 2017. It features a travel range of 800 mm in the X-axis, 560 mm in the Y-axis, and 510 mm in the Z-axis. The machine includes a robust table size of 1,100 x 560 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki CMX 800 V vertical machining centre. Contact us for further details. - CNC Control: HEIDENHAIN TNC 620 (SLIMline Control Panel / MC 7420D PC & Screen + TE 715D Keyboard)- Table Clamping Surface: 1,100 x 560 mm- Max Table Load (Center): 800 kg- Table Loading Height (Floor to top edge): 850 mm- T-Slots: 4 / 18H12 (Distance between slots: 100 mm; 1 reference slot: 18H7)- Spindle Speed Range: 20 – 12,000 rpm- Spindle Drive Power (40% ED / 100% ED): 13 kW / 9 kW- Spindle Torque (40% ED / 100% ED): 82 Nm / 54 Nm- Tool Taper / Interface: SK40 (DIN 69871 / DIN 69872 Form A/B pull stud)- Tool Clamping Force: 10 kN (SK40 / BT40)- Tool Magazine Capacity: 30 pockets (chain type)- Max Tool Diameter (with adjacent tools): 80 mm- Max Tool Diameter (with free adjacent pockets): 125 mm- Max Tool Length (from spindle nose): 300 mm- Max Tool Weight (Automatic tool change): 8 kg- Max Total Magazine Load: 240 kg- Feed Drives: AC Servomotors on X, Y, and Z axes- Rapid Traverse Rate (X / Y / Z): 30 / 30 / 30 m/min- Feed Speed Range (X, Y, Z): up to 20,000 mm/min- Position Measurement Resolution: 1 µm- Positioning Uncertainty P (VDI/DGQ 3441): 6 µm- Chip Management: Integrated scraper conveyor (bande grattante, 220 L coolant tank, 20 L/min pump at 5 bar)- External Coolant & Air Supply: External adjustable coolant nozzles and blow air (M25)- Internal Cleaning: Work area rinsing / flushing gun (pistolet de rinçage)- Manual Axis Movement: Electronic handwheel (HR 510FS)- Access / Safety Authorization: DMG MORI SMARTkey electronic mode selector- Apparent Power: 32 kVA- Rated Supply Voltage: 400 V AC ±10% (3/N/PE)- Mains Frequency: 50/60 Hz- Control Voltage: 230 V AC / 24 V DC- Full Load Current (In max): 52 A- Main Fuse: 63 A- Short Circuit Breaking Capacity (Ics): 0.63 kA- Basic Machine Weight: approx. 5,400 kg- Chip Conveyor Weight: 500 kg Gjdpfx As Agb E Rsn Eoui Technical Specification Taper Size SK 40

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, machine/vehicle number: 01620006501, turning length: 650 mm, turning diameter: 350 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 255 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,800 mm, total length: 4,500 mm, total width: 2,200 mm, overall weight: 3,000 kg, bar passage: 65 mm, controller manufacturer: HEIDENHAIN, controller model: CNC PILOT 620, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, nominal power (apparent): 21 kVA, operating hours of spindle: 10,771 h, DMG NEF 400 CNC lathe - Swing diameter over bed: 385 mm - Max. swing diameter over carriage: 350 mm - Distance between centers: 805 mm - Z-axis travel of tailstock: 680 mm - Height of spindle flange from ground: 1000 - 1010 mm - Diameter of spindle flange: 170 H5 mm - Diameter of chuck: 200/250 mm - Diameter of spindle bore: 87 mm - Diameter of draw tube: 67.5 mm - Diameter in the front bearing: 100 mm - Incl. C1 axis, speed: 200 rpm - Feed force in X/Z axis S1: 4.5 / 6.2 kN - Feed force X/Z axis S6: 6 / 8.5 kN - Ball screw X/Z axis: 32 x 10 mm - Diameter of tool holder: VDI 30 - Number of tools: 12 pieces, of which 6 are driven - Tool shank: 20 x 20 mm - Tailstock travel: 680 mm - Max. feed force: 680 daN - Morse taper: MK 4 The machine is equipped with a tailstock, a SAUTER turret, and a three-jaw chuck from the manufacturer SCHUNK, jaw width: 210 mm, with hydraulic clamping, including various VDI 30 tool holders, some driven and some standard, some fitted with lathe accessories, as well as a chip conveyor and documentation. FCA D-94227 Zwiesel - loaded onto a truck. Gods Afun Ijpfx An Eeui

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 255 mm, travel distance Z-axis: 800 mm, number of axes: 3, Horizontal turning machine manufactured in 2012. This DMG NEF 400 features a maximum turning diameter of 350 mm and a distance between centers of 805 mm. It includes a tool turret with 12 stations and a maximum spindle speed of 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the DMG NEF 400 machine we have for sale. Contact us for further details. - Control Unit: Siemens 840D SL- Number of Axes: 3 (X, Z, and C1-axis)- Operating Machine Hours: 1850 h - Spindle Hours: 500 h- Tailstock Travel (Z): 680 mm- Swing Diameter over Bed: 385 mm- Max Swing Diameter over Cross Slide: 350 mm- Max Turning Diameter: 350 mm - Distance Between Centers: 805 mm- Turning Length: 650 mm- Spindle Flange Height from Floor: 1000 - 1010 mm- Spindle Flange Diameter: 170h5 mm- Bar Capacity: 65 mm - Spindle Bore Diameter: 87 mm- Draw Tube Diameter: 67.5 mm - Front Bearing Diameter: 100 mm- Max Spindle Speed: 4,500 rpm - Max Spindle Power (100% / 40% ED): 8 / 11.5 kW- Max Spindle Torque S1 (100% ED): 240 Nm - Max Spindle Torque S6 (40% ED): 340 Nm- Max Workpiece Weight (Chuck): 100 kg- Max Workpiece Weight (Tailstock): 260 kg- Rapid Traverse (X / Z): 30 / 30 m/min- Feed Force X / Z (S1, 100% ED): 4.5 / 6.2 kN- Feed Force X / Z (S6, 40% ED): 6 / 8.5 kN- Ball Screws (X / Z): 32 x 10 mm- Tool Turret: 12 stations- Tool Holder Shank / Mounting: VDI 30 - Tool Shank Size: 20 x 20 mm- Tailstock Taper: MT 4 (MK 4)- Tailstock Max Feed Force: 680 daN- Main Machine Dimensions (L x W x H): 2667.5 x 2215 x 1810 mm- Machine Weight: approx. 3400 kg- Hydraulic Power Unit: 40 L capacity, 1.5 kW pump, 50 bar, 17 L/min- Coolant Tank with Chip Catch Pan: Dimensions 2408 x 799 x 445 mm, Weight 176 kg, Capacity 100 L, Pump 1.28 kW, Pressure 6 bar- Positioning Tolerance Tp (X / Z): 12 / 14 µm - Positioning Uncertainty P (X / Y / Z): 12 / 14 µm- Positioning Deviation P8 (X / Z): 8 / 10 µm - Repeatability / Scatter P5 max (X / Z): 3 / 4 µm- Reversal Error U max (X / Z): 4 µm- Mains Connection: 400 V, 21 kVA, 50 Hz, 24 V DC control voltage- Compressed Air Requirement: 5 - 8 bar • C-Axis • Driven Tools • Hydraulic Tailstock • Steady Rest • Tool Measuring System Gjdpfe Ai Sdhox An Ejui • Absolute Measuring System • Chip Conveyor • Oil / Emulsion Mist SeparatorOptional Equipment / Accessories:Schunk ROTA NCK 250-75 3-jaw chuckSchunk ROTA 2B 250 power chuck, SMW Autoblok collet chuck, full set of collets from 4 mm to 60 mm Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2020, operating hours: 6,056 h, spindle speed (max.): 3,600 rpm, total height: 2,135 mm, overall weight: 10,000 kg, controller manufacturer: SIEMENS, controller model: 840D, workpiece diameter (max.): 600 mm, number of slots in tool magazine: 12, This 3-axis horizontal turning machine manufactured in 2020 features a Siemens 840D control and a spindle speed up to 3,600 rpm. It offers a max turning diameter of 600 mm and a length of 2000 mm. Equipped with a chip conveyor, Siemens CELOS control system, and a fume extraction system, it's ideal for complex machining tasks. Consider the opportunity to buy this DMG MORI CTX 2000 horizontal turning machine. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • Large number of turning holders for vdi 50 turrets, holders for hobbing gears, grooves, gear teeth, etc. , large block holder (sauter) for holding boring tools, driven angle milling attachment (mt), 2 × driven straight holders (ews). • Slide traverse x / ±y / z: 415 / ±75 / 2025 mm • Hydraulic oil capacity: approx. 40 l • Max pressure: 90 bar • Clamping device pressure (max): 10–70 bar • Coolant tank capacity: approx. 250 l • Pump power: 0. 85 kw • Pump nominal delivery at 5 bar: 20 l/min • Room temperature: +15 to +35 °c • Max relative air humidity: 75% Gedpox D Iv Eefx An Eoui Technical Machine Benefits • Ism102: 33 kw • Ism102plus: 40 kw torque (100% ed) • Ism102: 580 nm • Ism102plus: 1700 nm • Thrust (s6 - 40%): 9 / 9 / 13 kn • Max turning length: 2000 mm • Bar capacity: 102 mm • Clamping chuck diameter: 315 mm • Tool system: din 69880 (vdi 3425, page 2) • Tool shank diameter: 50 mm Extra Information Machine still under power. The machine is equipped with a fume extraction system, chip conveyor, Siemens CELOS control system with touchscreen, automatic tailstock, automatic steady rest unit, hydraulically clamping chuck, and increased coolant pressure through the tool spindle. Dimensions Machine Depth 5564 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, DMG Mori Sauer Lasertec 65 Shape Year of manufacture: 2014 X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 560 mm Control system: Siemens 840D sl Main spindle: Speed range – main spindle: 20 – 10,000 min/-1 Drive power – main spindle: 13 / 9 kW Max. torque: 83 / 57 Nm Tool interface: HSKA63 DIN 69893 NC rotary table: Table clamping surface: 800 x 650 mm Max. table load: Swiveling range / Rotational range T-slots: 600 B: +/- 120 C: 360 Max. workpiece dimensions: 650 (840) x 500 mm Tool magazine: Number of tool positions: 30 Max. tool weight: 6 kg Max. tool diameter: 80 mm Max. tool diameter with free neighboring position: 160 mm Max. workpiece length: 315 mm Tool change time (tool to tool): 1.6 sec Chip removal time: 8.0 sec Feeds: Rapid traverse: 40 m/min Feed force: 7/13/10 kN Feed rate: 1 – 40,000 mm/min Total power consumption: 24 kVA Machine weight: approx. 11.5 t Gusdj Ai Rb Ispfx An Eji Space requirement: approx. 4.5 x 3.5 x 2.3 m Documentation Coolant system Electrical handwheel Laser head: 100 watts Laser operating hours: 6177 h / 2802 h Machine operating hours: 18703 h / 4738 h

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, spindle motor power: 11,000 W, total height: 2,120 mm, overall weight: 5,500 kg, product length (max.): 2,900 mm, number of axes: 3, This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details. • Operating hours: 11,996 • Control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm • Turret: 12 stations (all driven), indexing time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW • Tailstock: programmable (B-axis), stroke 564 mm • Coolant pump • Oil cooler • Electronic handwheel • 3-color status lamp Guodoyg Icljpfx An Esi • Air-conditioned electrical cabinet • Condition/availability: machine in perfect condition; excellent appearance; very good condition; videos available; immediately available Additional equipment • Chip conveyor • Bar feeder interface • Bar feeder: SAMSYS MULTI-3000 (short bar, 1000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus size 65 • HAINBUCH collets: Ø 6.5 – 10 – 16 – 18 – 20 – 25 – 26 – 30 – 40 mm • Square collets: 20×20 – 35×35 – 40×40 mm • Hex collet: 14 mm • Tool measuring probe arm • 7 driven toolholders (3 axial, 4 radial) • 15 static toolholders • Parts catcher • Automatic door opening/closing • Isolation transformer • Documentation & CD-ROM • Transport and handling clamping brackets

Condition: ready for operation (used), Year of construction: 2011, operating hours: 22,008 h, spindle motor power: 52,000 W, spindle speed (max.): 2,500 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 2,050 mm, total height: 2,670 mm, total width: 4,215 mm, overall weight: 24,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, product length (max.): 7,601 mm, number of slots in tool magazine: 12, swivel angle B-axis (min.): -119 °, swivel angle B-axis (max.): 120 °, number of axes: 7, This 7-axis DMG CTX gamma 2000 TS was manufactured in 2011. It features a maximum turning diameter of 700 mm and a turning length of 2,000 mm. The machine includes impressive X1-axis travel of 650 mm and Z1-axis travel of 2,050 mm. If you are looking to get high-quality turning and milling capabilities, consider the DMG CTX gamma 2000 TS turn-mill centre we have for sale. Contact us for further details. • Working area + axes travels: • Swing diameter: 700 mm • Maximum turning diameter: 700 mm • Maximum turning diameter opposite spindle/tool holder: 400 mm • Spindle distance: 2,260 mm • Turning length: 2,000 mm • X1-axis travel: 650 mm • Y1-axis travel: +/- 200 mm • Z1-axis travel: 2,050 mm • B1-axis travel: +/- 120 degrees • X2-axis travel: 210 mm • Z2-axis travel: 1,910 mm • Z3-axis travel: 1,910 mm • Main Spindle: Integrated motor spindle ISM 102 Plus: • Clamping cylinder diameter: 630 mm • Inner draw tube 104 mmDraw tube diameter: 104 mm • Spindle bore diameter: 118 mm Godpfxe Ah E Ecj An Esui • Front bearing diameter: 180 mm • Maximum spindle power (100% / 40% ED): 40 / 52 kW (53.6 / 69.7 hp) • Maximum spindle speed: 2,500 rpm • Maximum torque (100% / 40% ED): 1,700 / 2,200 Nm • C-axis angular resolution: 0.001 degrees • Sub-Spindle: Integrated motor spindle ISM 102 Plus: power 40/52 kW, torque 1700/2200 Nm, max speed 2500 min-1, inner draw tube 104 mm, C-axis and hydraulic brake, lower support (Z3) • Tool Magazine: Disc magazine with 36 stations (max tool diameter 80 mm, max length 400 mm, max weight 10 kg) • Milling Spindle: Power 13.2/22 kW (100/40% ED), HSK-63A clamping, Speed Max 12000 min-1, Torque 60/100 Nm (100/40% ED) • Tool turret: 12-position star turret with driven tools, VDI 40 mm, lower cross slides (X2, Z2) with AC servo drives • Power Consumption / Supply: 100 kVA, 400V (±10%, N, PE), 50 Hz, 160 A fuse • Machine Dimensions (LxWxH): 7601 x 4215 x 2530 mm (without external cooling unit) • ADDED OPTIONS: • Automation: Automatic sliding door for workspace (Landert) • Workpiece measuring system Renishaw • Cooling and Chip Removal: Coolant system 8/20 bar (980 l tank, 40 µm band filter, 4.5 kW heat exchanger), outer chuck flushing for main and sub-spindles, chip flushing pistol, mechanical oil mist extractor (1100 m³/h, H13 filter) • Shaft Machining Equipment: Tailstock function for sub-spindle (250-1200 daN), steady rest on turret head (SR-3.1-ZSW, clamping Ø25-165 mm) • Spindle Clamping: Power-operated shaft chuck (SMW W 260-3-A08), dual clamping cylinder SMW, face driver with fixed center point, torque support for milling spindle, angular drilling head 90° (Benz), 4-color signal light, unstable grid package, higher ambient temperature package • Sub-Spindle Clamping: Power-operated chuck for shaft machining with retractable jaw holder (type W 260-3-A08, manufacturer SMW, including A8/Z220 reduction flange), dual clamping cylinder for shaft machining chuck (SMW, surcharge to standard cylinder), face driver in workpiece-dependent design with fixed centering point and power-operated driving pins for shaft machining chuck • Software & Powertools: DMG Messenger, DMG Netservice (VPN), 3D data model of workspace (Step/IGES), DMG programming software for PC with Windows XP Pro, Shopturn 840D with CAD-Reader Technical Specification Counter Spindle Yes Driven Tools Yes Taper Size HSK 63 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, total height: 2,742 mm, total width: 2,265 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 3,900 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, tool weight: 6,000 g, product length (max.): 2,441 mm, number of axes: 3, This 3-axis DMG MORI DMC 635 V ecoline was manufactured in 2014. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine includes a robust table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMC 635 V ecoline vertical machining centre we have for sale. Contact us for further details. - Control: HEIDENHAIN TNC 620 (MC 7420D / TE 7150 keyboard / SLIMline panel)- Number of Axes: 3 (X, Y, Z)- X-Axis Travel: 635 mm- Y-Axis Travel: 510 mm- Z-Axis Travel: 460 mm- Table Clamping Surface: 790 x 560 mm- Max. Table Load (Center): 600 kg- Table T-Slots: 4 / 14H12, distance 100 mm (1 reference slot 14H7)- Table Height from Floor: 720 mm- Spindle Speed Range: 20 - 12,000 rpm (1/min)- Spindle Drive Power (40% ED / 100% ED): 13 kW / 9 kW- Spindle Torque (40% ED / 100% ED): 83 Nm / 57 Nm- Tool Taper / Interface: SK40 (DIN 69871 / ISO 7388/2 Type A or DIN 69872 Form A/B)- Tool Clamping Force: 8 kN- Tool Magazine Capacity: 30 stations- Max. Tool Diameter (Adjacent Empty / Full): 130 mm / 80 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 6 kg (Max. total magazine tool load: 90 kg)- Rapid Traverse (X / Y / Z): 30 m/min- Feed Rate (X / Y / Z): Continuously programmable up to 20,000 mm/min- Positioning Resolution / Uncertainty: 1 µm / 16 µm (VDI/DGQ 3441)- Coolant Tank Capacity: ~120 l- Machine Weight: ~3,900 kg (3,950 kg with 30-tool magazine)- Apparent Power: 17 kVA- Nominal Line Current (In max): 28 A- Main Fuse: 35 A (Short-circuit breaking capacity: 0.35 kA)- Power Supply: 400 V AC (3/N/PE), 50/60 Hz- Control Voltage: 24 V DC / 230 V AC- Pneumatic Supply Pressure: 5.5 - 8.0 bar (Air consumption: 30 m³/h without blow-off; +20 m³/h continuous)- Machine Dimensions (W x D x H): 1,880 mm (2,265 mm with coolant tank) x 2,441 mm x 2,742 mm (Transport height min: 2,330 mm)- Required Floor Space: 4,500 x 4,400 mm Technical Specification Taper Size SK 40 Gjdpfo Agb Uvjx An Esui

Condition: ready for operation (used), Year of construction: 2023, operating hours: 750 h, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: DMG MORI SLIMline multi-touch, number of slots in tool magazine: 42, This DMG MORI CLX 350 V3 was manufactured in 2023. A universal turning machine featuring driven tools and a C-axis. It includes a hydraulic 3-jaw chuck D210mm, a 12-slot servo tool turret holder VDI 30 with 12 driven tool stations, and a hollow clamping device with a max. bar capacity of D65mm. A great opportunity to buy this DMG MORI CLX 350 V3 universal turning machine. Contact us for further details regarding this machine. Additional equipment • Direct path measuring system X axis • Chip tray • Hollow clamping device • Hydraulically movable tailstock via M-function • External electronic handwheel • DMG Mori IoTconnector • Machine includes tool holder, chuck and jaws Extra Information • Main spindle: a2-6 with ac motor • Hydraulic 3-jaw chuck diameter: 210 mm • Max. Bar capacity: 65 mm • Driven tools and c-axis for enhanced machining capabilities Guedpfx Anjyyuv Ts Eei • 750 Spindle hoursMachine still under powerno chip conveyer included

Condition: ready for operation (used), DMG / Gildemeister 1100498 Monitor with keyboard, ID: 2386389, Serial Number: 505833009, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gusdpfxs Aaxgqo An Eji