Used Dmg Dmu 50 for sale (389)

Condition: used, Year of construction: 2012, feed length X-axis: 635 mm, feed length Y-axis: 510 mm, feed length Z-axis: 460 mm, controller model: Sinumerik, table width: 560 mm, table length: 790 mm, spindle speed (max.): 10,000 rpm, We offer this used DMG DMC 635 V eco vertical machining center, manufactured in 2012. Serial number: 1537000588A X/Y/Z: 635 × 510 × 460 mm Table: 790 × 560 mm Spindle speed: up to 10,000 rpm SK40 Sinumerik Gedpfxsz Iy A Ae Am Ejbw Spindle refurbished in October 2019. First owner If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 2024, x-travel 750 mm y-travel 600 mm z-travel 520 mm B-axis (table) - 10°/+95° Grad c-axis 360° Grad table surface area Ø 800 x 620 mm control Heidenhain TNC 620 spindle turning speed - stepless 20 - 15.000 U/min power capacity - milling spindle 20 / 14,5 kW max. torque on the milling spindle 121 / 84 Nm rapid traverse 30 m/min tool change unit 60 Werkzeuge tool taper SK40 table load 350 max. kg total power requirement 35 kVA weight of the machine ca. 11 t dimensions of the machine ca. 6,5 x 4,5x 3,0 m Five-sided machining center with ROBO2GO Milling robot in excellent condition. The ideal machine for minimally staffed shifts, right down to single-part production! (Can also be used as a stand-alone machine) The machine has only 2,850 spindle hours and is equipped as follows: * Heidenhain TNC 620 3D control with 19" screen * electronic handwheel * direct position measurement system (X, Y, Z) * Universal milling head with controlled B-axis * SK40 motor spindle, 15,000 rpm, 20 kW * Tool magazine (carousel), 60 positions * HEIDENHAIN TS 460 touch probe for workpiece measurement with optical signal transmission * Tool measurement in the work area: Blum Laser NT-Hybrid * BLUM laser probe for measuring tool length and diameter * Pneumatic control system for the clamping device, mounted on the machine table * SCHUNK KSP plus 160 pneumatic vise * Blowing air can be activated through the center of the spindle * Electronic handwheel * through the spindle coolant (40 bar) with paper-tape filter system * Chip conveyor _____ * Flexible workpiece loading and unloading system with a 6-axis industrial robot - Interchangeable workpiece magazine, including workpiece trays - Max. 42 parts up to 100 x 100 mm - Max. 9 parts up to 200 x 200 mm - Max. tray load: 700 kg - Max. robot payload: 25 kg * 2-jaw gripper for rectangular workpieces - Gripping range with jaw adjustment system: 20–195 mm - Min. workpiece height: 20 mm - Gripper stroke: 6 mm per jaw * Drawer storage: - For increased capacity and loading/unloading of workpieces during active production time Includes 15 touchscreen - Each drawer can be loaded with different jobs via the software - Number of drawers: 3 (+ 2 optional) - Max. workpiece height with 3 drawers: 250 mm Gjdpfx Ams Ai Ucao Esbw - Max. workpiece height with 5 drawers: 100 mm - Max. load per drawer: 300 kg - Includes safety fence with light curtain - Inlay for up to 22 parts, up to 100 x 100 mm, for drawer storage The machine can be inspected under power!

Condition: used, Year of construction: 2011, feed length X-axis: 635 mm, feed length Y-axis: 510 mm, feed length Z-axis: 460 mm, controller model: Sinumerik, table width: 560 mm, table length: 790 mm, rotational speed (max.): 10,000 rpm, overall weight: 3,900 kg, spindle speed (max.): 10,000 rpm, We offer this used DMG ECOLINE DMC 635 V eco vertical machining center, manufactured in 2011. Serial number: 1537000413A Year of manufacture: 2011 Gbodpfx Ajz Iyzrom Esw Maximum spindle speed: 10,000 rpm X/Y/Z: 635 x 510 x 460 mm Table: 790 x 560 mm SK40, Sinumerik Spindle refurbished in October 2024 First owner Weight: 3900 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2023, operating hours: 2,031 h, functionality: fully functional, machine/vehicle number: 9088000015A, feed length X-axis: 1,100 mm, feed length Y-axis: 550 mm, feed length Z-axis: 510 mm, controller model: Sinumerik One, workpiece weight (max.): 1,700 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,700 kg, overall weight: 6,950 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 2,031 h, spindle nose: SK40, number of slots in tool magazine: 24, Equipment: documentation/manual, We offer the transfer of a lease (cession) for a used DMG MORI M2 milling machine, including its accessories, for 1 EUR. Gjdpfxez Hl Ihs Am Ejbw Machine type: M2 Serial number: 9088000015A Year of manufacture: 2023 (first start-up: end of December 2024) Spindle speed max: 10,000 rpm Weight: 6950 kg X/Y/Z: 1100×550×510 mm Table: 1400×600 mm Spindle: up to 10,000 rpm SK40 Sinumerik One High rigidity thanks to a monoblock bed and a fixed table (maximum load 1700 kg) Included with the machine: 19 toolholders with shanks (mainly Tungaloy), 2 AUTOWELL ATW-689 vices from April 2026, and a tester (all accessories for 1 EUR). First owner Price: LEASE TRANSFER Transfer fee: 0.00 EUR Lease payment: 1340 EUR/month Total amount of payments (24-72) remaining: 64,320 EUR Final buyout amount: 4200 EUR. Loading costs will be covered by us. The price stated in the advertisement represents the total value of the lease agreement. THIS OFFER IS VALID ONLY UNTIL 15.11.2026.

Condition: ready for operation (used), DMG / Gildemeister 1100498 Monitor with keyboard, ID: 2386389, Serial Number: 505833009, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gbsde Aaxgqspfx Am Eow

Condition: ready for operation (used), Year of construction: 2011, operating hours: 22,008 h, spindle motor power: 52,000 W, spindle speed (max.): 2,500 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 2,050 mm, total height: 2,670 mm, total width: 4,215 mm, overall weight: 24,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, product length (max.): 7,601 mm, number of slots in tool magazine: 12, swivel angle B-axis (min.): -119 °, swivel angle B-axis (max.): 120 °, number of axes: 7, This 7-axis DMG CTX gamma 2000 TS was manufactured in 2011. It features a maximum turning diameter of 700 mm and a turning length of 2,000 mm. The machine includes impressive X1-axis travel of 650 mm and Z1-axis travel of 2,050 mm. If you are looking to get high-quality turning and milling capabilities, consider the DMG CTX gamma 2000 TS turn-mill centre we have for sale. Contact us for further details. • Working area + axes travels: • Swing diameter: 700 mm • Maximum turning diameter: 700 mm • Maximum turning diameter opposite spindle/tool holder: 400 mm • Spindle distance: 2,260 mm • Turning length: 2,000 mm • X1-axis travel: 650 mm • Y1-axis travel: +/- 200 mm • Z1-axis travel: 2,050 mm • B1-axis travel: +/- 120 degrees • X2-axis travel: 210 mm • Z2-axis travel: 1,910 mm • Z3-axis travel: 1,910 mm • Main Spindle: Integrated motor spindle ISM 102 Plus: • Clamping cylinder diameter: 630 mm • Inner draw tube 104 mmDraw tube diameter: 104 mm • Spindle bore diameter: 118 mm • Front bearing diameter: 180 mm • Maximum spindle power (100% / 40% ED): 40 / 52 kW (53.6 / 69.7 hp) • Maximum spindle speed: 2,500 rpm • Maximum torque (100% / 40% ED): 1,700 / 2,200 Nm • C-axis angular resolution: 0.001 degrees • Sub-Spindle: Integrated motor spindle ISM 102 Plus: power 40/52 kW, torque 1700/2200 Nm, max speed 2500 min-1, inner draw tube 104 mm, C-axis and hydraulic brake, lower support (Z3) • Tool Magazine: Disc magazine with 36 stations (max tool diameter 80 mm, max length 400 mm, max weight 10 kg) • Milling Spindle: Power 13.2/22 kW (100/40% ED), HSK-63A clamping, Speed Max 12000 min-1, Torque 60/100 Nm (100/40% ED) • Tool turret: 12-position star turret with driven tools, VDI 40 mm, lower cross slides (X2, Z2) with AC servo drives • Power Consumption / Supply: 100 kVA, 400V (±10%, N, PE), 50 Hz, 160 A fuse • Machine Dimensions (LxWxH): 7601 x 4215 x 2530 mm (without external cooling unit) • ADDED OPTIONS: • Automation: Automatic sliding door for workspace (Landert) • Workpiece measuring system Renishaw • Cooling and Chip Removal: Coolant system 8/20 bar (980 l tank, 40 µm band filter, 4.5 kW heat exchanger), outer chuck flushing for main and sub-spindles, chip flushing pistol, mechanical oil mist extractor (1100 m³/h, H13 filter) • Shaft Machining Equipment: Tailstock function for sub-spindle (250-1200 daN), steady rest on turret head (SR-3.1-ZSW, clamping Ø25-165 mm) • Spindle Clamping: Power-operated shaft chuck (SMW W 260-3-A08), dual clamping cylinder SMW, face driver with fixed center point, torque support for milling spindle, angular drilling head 90° (Benz), 4-color signal light, unstable grid package, higher ambient temperature package • Sub-Spindle Clamping: Power-operated chuck for shaft machining with retractable jaw holder (type W 260-3-A08, manufacturer SMW, including A8/Z220 reduction flange), dual clamping cylinder for shaft machining chuck (SMW, surcharge to standard cylinder), face driver in workpiece-dependent design with fixed centering point and power-operated driving pins for shaft machining chuck • Software & Powertools: DMG Messenger, DMG Netservice (VPN), 3D data model of workspace (Step/IGES), DMG programming software for PC with Windows XP Pro, Shopturn 840D with CAD-Reader Technical Specification Counter Spindle Yes Driven Tools Yes Taper Size HSK 63 Through-spindle Coolant Yes Godpfe Ah E Ecex Am Eobw

Condition: ready for operation (used), Year of construction: 2005, operating hours: 7,500 h, spindle motor power: 18,500 W, spindle speed (max.): 3,500 rpm, travel distance Y-axis: 120 mm, overall weight: 5,800 kg, number of axes: 4, This 4-axis DMG Mori Seiki SL 2500 Y was manufactured in 2005. It features a maximum swing diameter of 755 mm and a machining diameter of 390 mm, with a maximum machining length of 655 mm. The machine includes a 12-station turret and a programmable hydraulic tailstock. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki SL 2500 Y turn-mill centre we have for sale. Contact us for further details. • Capacity & working area: • Max. swing diameter: 755 mm • Max. machining diameter: 390 mm • Max. machining length: 655 mm • Bar capacity: 75 mm • Rapid traverse: 18 m/min (X) / 24 m/min (Z) • Guideways: Box ways on all axes • Main spindle & headstock: • Spindle torque: 640 Nm • Spindle nose: A2-8 • Chuck: 250 mm Kitagawa B-210 (metric) • Cooling: Daikin spindle oil chiller • Turret & live tooling: • 12-station turret (all stations motorized) • Turret indexing time: 0.2 s • Live tooling speed: 4,000 RPM • Live tooling motor: 5.5 kW • Tooling system: Sandvik Capto quick change tooling system (valued at €22,000–€24,000) • Tailstock & axes: • Axis configuration: 4-axis (X, Z, Y, C) • Tailstock: Programmable hydraulic tailstock • Tailstock taper: MT5 Morse taper • Control, software & measuring: • 3D graphic simulation via proprietary CAM software • Cycle time verification • Automatic load control & tool wear monitoring Godpfx Amozuymqj Ejbw • Tool measurement: Automatic Renishaw tool presetter arm • Connectivity: USB, PCMCIA, RS-232 Additional equipment • Bar feeder interface (machine prepared) • Interface for Autoblok hydraulic steady rest (ready for installation) • Automatic parts catcher • Hinge-type side chip conveyor • Large assortment of static and live tool holders • Dual foot pedal (main chuck & tailstock operation) • Electrical transformer • Complete documentation: Parts list, electrical schematics, programming & operating manuals Technical Specification Counter Spindle No Driven Tools Yes

Year of construction: 2014, condition: excellent (used), DMG PH 150-8 . year of construction 2014 . with pallets . Touch screen . plant in very good condition . Godpfx Asin Dklom Ejbw

Condition: good (used), Year of construction: 2003, CNC vertical machining center, manufacturer DMG MORI, type: DMC 104 V, year of manufacture 2003. Control system: Heidenhain ITNC 530. Spindle interface: SK 40 Spindle speeds: up to 8,000 rpm Tool magazine: 30 positions Travel ranges: X 1040 mm, Y 600 mm, Z 500 mm Table: 1250 mm x 600 mm Gedpo Aicz Hefx Am Eebw Machine documentation available. Good condition.

Condition: good (used), Year of construction: 2005, operating hours: 40,403 h, functionality: fully functional, Deckel Maho DMC 80H duo Block About the Machine: Extremely robust machine. Technical Specifications: - Control: Siemens 840D - Travel paths X, Y, Z axes: 800/800/800 mm - Travel path C axis: 360° - Clamping surface rotary table: 800 x 630 mm - Rapid traverse: 60 m/min - Spindle speed: 20 - 12000 rpm - Tool holder: SK50 - Tool magazine with 60 positions - Network connectivity - Automation interface available Equipment: - Internal coolant supply 50 bar with belt filter system - Work area rinsing system - Rinsing gun - Chip conveyor Inspection/Test under power at our facility is of course possible. We are pleased to offer transport, installation and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH & Co. KG, are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and other renowned manufacturers. We support you! Gbodpfx Amsyhwrcs Eow From machine purchase, transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Condition: used, Year of construction: 2008, turning diameter / mm centre distance / mm swing diameter / mm Manufacturer: DMG GILDEMEISTER Model: CTX 510 eco Gjdpozu A Ukefx Am Esbw Year of manufacture: 2008 Machine type: CNC lathe / turning center Control system: Siemens SINUMERIK 810D Powerline Max. spindle speed: 3,250 rpm Spindle speed range: approx. 500–3,250 rpm Spindle power: 33 kW at 40% duty cycle / 22 kW at 100% duty cycle Spindle torque: 630 Nm at 40% duty cycle / 420 Nm at 100% duty cycle X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. turning diameter: 465 mm Max. swing / turning diameter: 680 mm Spindle bore / bar capacity: approx. 76–92 mm (depending on configuration) Front spindle diameter: 140 mm Turret: 12-station Driven tool speed: up to 4,000 rpm Driven tool power: approx. 8.4 kW Chuck: 250 mm or 315 mm Max. workpiece weight between centers: 350 kg Total power requirement: approx. 50 kVA Power supply: 400 V, 50/60 Hz Machine weight: 7,500 kg Incl. chip conveyor Note: All technical specifications are for guidance only and are subject to change. Actual machine data may vary due to different equipment variants and subsequent modifications. No warranty or guarantee is provided regarding the accuracy or completeness of the technical specifications. The specifications and actual condition of the offered machine are the sole determining factors.

Condition: used, DMG HSC 55 linear is a 5-axis machining center designed for precision, high accuracy and reliable performance. Travels X 450 mm, Y 650 mm, Z 460 mm; A-axis -10/+110°; tool magazine 120 places; tool Ø max 80 mm, length 250 mm, weight 6 kg; spindle taper HSK 63. Spindle speeds 2–28,000 min⁻¹; spindle power 38/28 kW; supply 3x400 V 50 Hz; total power 70 kVA; machine weight ≈9500 kg; dims L3210×W2930×H2900 mm. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and toolmaking. Gbedpfx As Adzdgjm Eow

Year of construction: 2012, condition: used, overall weight: 3,400 kg, total length: 3,500 mm, total width: 1,800 mm, total height: 1,000 mm, Turning length max.: 650 mm Spindle speed: 4500 - rpm Weight approx.: 3,400 kg Control: Heidenhain Manual Plus Dimensions (LxWxH) approx.: 3500 x 1800 x 1000 mm Year of construction: 2,012 Terms of payment: 100% prepayment before pick-up Terms of delivery: Loaded on truck Gbjde Aimnmjpfx Am Esw under power: Yes

Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG Mori M1 milling machine (version with 12,000 rpm, spindle cooling). Year of manufacture: 2022. Very good condition, inspected by DMG service. Low operating hours, only 1,316 spindle hours. Machine can be connected and tested on-site. Gjdpfozr Rugox Am Ejbw

Condition: used, DMG CMX 800 V MACHINING CENTER Gbsdpfj Akcvdsx Am Ejw YEAR: 2017 MANUFACTURER: DMG MORI PRODUCER: FAMOT MODEL: CMX 800 V CNC: HEIDENHAIN FEATURES 1. Travels and Working Range • X-axis travel: 800 mm • Y-axis travel: 560 mm • Z-axis travel: 510 mm • Spindle nose – table surface distance: 120 – 630 mm 2. Work Table • Table surface: 1,040 x 560 mm • Maximum permissible load on the table: 800 kg 3. Main Spindle • Maximum spindle speed: 12,000 rpm • Spindle connection: SK40 / ISO 40 4. Tool Magazine and Accessories • Tool magazine capacity: 30 positions • Presetting / Zeroing: Integrated Renishaw touch probe kit for Siemens CNC • Chip conveyor Machine hours (Power on): approx. 19,918 hours Spindle working hours (Cutting): approx. 7,717 hours Machine comes with operating manuals and CE declaration of conformity. All technical data provided is indicative and subject to change without notice and therefore should not be considered binding.

Condition: used, Year of construction: 2006, operating hours: 37,695 h, functionality: fully functional, Equipment: documentation/manual, CNC lathe – Gildemeister CTX 410 with C-axis (used) Machine data Model: Gildemeister CTX 410 Year of manufacture: 2006 Control system: Siemens 840D (ShopTurn) Spindle hours: approx. 37,695 h Max. spindle speed: 5,000 rpm Max. turning length: 635 mm Spindle bore: 65 mm Tool turret: 12-station Tool holder: VDI30 Condition: used, functional Accessories Chip conveyor with coolant pump Bar loader included, but never connected IFM oil mist extraction system Röhm 3-jaw chuck Maintenance / Service The machine was recently realigned by a DMG technician (turret and spindle). The following components were replaced: Door switch Foot pedal for chuck Gedez Nxcxepfx Am Esbw Various relays New NPU New PLC Location 24222 Schwentinetal Transport / Collection Collection only Transport and loading are to be arranged by the buyer Terms of sale Sale exclusively to businesses / entrepreneurs No sale to consumers Sale is made with exclusion of any warranty for defects No guarantee or warranty of suitability Inspection and functional testing possible by appointment Price net. VAT can be shown separately.

Condition: used, NZX 1500/800SY is a CNC Turning-Milling-Drilling Center with high precision, accuracy and reliability. Capacities: 2 turning spindles, 2 revolvers, swing diameter over bed 800 mm, max. turning Ø 320 mm, max. bar Ø 52 mm; travels Z 810 mm, X 210 mm, Y 110 mm (both carriages). Specs: spindle speeds 0–6000 t/min, spindle power 22/18.5 kW, driven tools power 7.5/5.5 kW, spindle nose JIS A2-5, spindle hole 61 mm; rapid traverse X 30 m/min, Z 50 m/min, Y 20 m/min; weight ~8100 kg; overall dims L4396×W2835×H2320 mm. Accessories: direct measuring system X axis, lamp, coolant system, coolant through counter spindle, loader interface, parts catcher, workpiece conveyor, chip conveyor. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and machine tools. Gbsdpfx Amjyxn I Hj Esw

Condition: used, Year of construction: 2014, Vertical high-speed machining center Manufacturer: DMG Mori Type: MILL TAP 700 Year of manufacture: 2014 Control system: Siemens 840D SL Godez I Inmepfx Am Eebw Travel ranges X/Y/Z: 700 x 420 x 380 mm Spindle speed max.: 24,000 rpm Tool magazine: 15 positions Weight approx.: 4,100 kg Automation with robot Manufacturer: Sontec Type: Sonflex Year of manufacture: 2023 Robot: Fanuc 121126

Condition: excellent (used), 1 used load lifting device, manufacturer STAHL, for overhead crane loading in a workshop. Gbedpfsz Dpx Eex Am Ejw Suitable for a DMG DMU 60 T machining center. Load capacity: 7 t Weight: 73 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel / Germany

Year of construction: 2012, condition: ready for operation (used), Optical measurement machine manufactured in 2012. This DMG Microset UNO 115 eco features a tool spindle taper of HSK-A63 and operates at an electrical connection of 230 V. With dimensions of 600 x 1200 x 1600 mm and a weight of 100 kg, it is designed for precision measurement tasks. If you are looking to get high-quality optical measurement capabilities, consider the DMG Microset UNO 115 eco machine we have for sale. Contact us for further details. • DMG Microvision- Tool Spindle Interface / Tool Holder: HSK-A63- Electrical Supply Voltage: 230 V- Connected Load / Power: 0.65 kVA (650 VA)- Compressed Air Requirement: 6 - 8 bar- Machine Weight: 100 kg Gsdpfxo Ai Smbj Am Eebw

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 380 mm, spindle bore: 56 mm, turning length: 345 mm, turning diameter: 380 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, overall weight: 4,200 kg, torque: 72 Nm, travel distance X-axis: 166 mm, travel distance Z-axis: 339 mm, DMG Gildemeister CTX 210 for sale, manufactured in 2006. Model V2. Gbedoyw Ndtjpfx Am Eow Approximately 8,600 operating hours. CNC Siemens 840D, 12-position turret VDI 30. Supplied with a set of collets for the chuck + documentation. Testing possible by appointment. Price includes loading onto the truck of your transport company.

Condition: used, Year of construction: 2014, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2014 Control : Heidenhain TNC 640 Speed : 18000 rpm Movement X/Y/Z : 800/1050/850 mm Tool holder : HSK-A63 Spindle: Technology:Motorspindle Speed:18.000 rpm Power:35 kW Torque:130 Nm Taper:HSK-A63 Cooling:Switching Coolant/Blow air NC-Swivelhead: Technology:Universal millinghead B-Axis:0,001° Swivelrange:-30°/+180° NC-Roundtable: Technology:Roundtable with Palletcarrier C-Axis:0,001° Clamping surface:ø800 x 630 mm Tableloading (max.):1.400 kg In general: Toolmagazine:Wheelmagazine (3 wheels), 273 Stations Rapid travers in X/Y/Z:60 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter, temperature control and Highpressure, 80 bar Workpiecemeasurement:Infrared-Touchprobe, Heidenhain TS 649 Toolmeasurement:Laser, BLUM Micro Compact NT Automation:Palletchanger, 2-fold Oilmistseparation:Interface mechanical prepared Processobservation:Operation mode 4 Setup operation:Electronic handwheel Further Accessory:ROTO-Clear, Rinsing pistol Gsdpe Ah Admsfx Am Esbw

Condition: used, Year of construction: 2014, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2014 Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1250/1250/1000 mm Tool holder : HSK-A100 Spindle: Technology:Motorspindle Speed:12.000 rpm Power:52 kW Torque:430 Nm Taper:HSK-A100 Cooling:Switching Coolant/Blow air NC-Swivelhead: Technology:Universal millinghead B-Axis:0,001° Swivelrange:-30°/+180° NC-Roundtable: Technology:Roundtable with Palletcarrier C-Axis:0,001° Clamping surface:1.000 x 800 mm Tableloading (max.):2.000 kg In general: Toolmagazine:Chainmagazine (2 chains), 240 Stations Rapid travers in X/Y/Z:60 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter, temperature control and Highpressure, 80 bar Workpiecemeasurement:Infrared-Touchprobe, m&h IRP 25.41 Godpfxs Ah Adie Am Eobw Toolmeasurement:Laser, BLUM NT Automation:Palletchanger, 2-fold Oilmistseparation:Interface mechanical prepared Processobservation:Operation mode 4 Setup operation:Electronic handwheel Further Accessory:ROTO-Clear, Rinsing pistol

Condition: excellent (used), Year of construction: 2017, operating hours: 7,349 h, turning length: 800 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, spindle motor power: 25 W, overall weight: 8,800 kg, Year of construction: 2017 CNC controller: Fanuc FS31iB (MAPPS IVS) Capacity Turning length mm: 800 Max. turning diameter mm: ø 320 Bar work capacity mm: 65 Upper turret X-axis travel mm: 210 Y-axis travel mm: 110 Z-axis travel mm: 810 Number of tool slots St .: 16 Speed ​​driven tools RPM: 6000 Lower turret X-axis travel mm: 210 Z-axis travel mm: 810 Number of tool slots St .: 16 Speed ​​driven tools RPM: 6000 Main spindle Speed ​​spindle rpm: 5000 Drive power spindle kW: 25/22 Spindle bore mm: 73 Chuck type: 8" Manufacturer: KITAGAWA Counter spindle Speed ​​spindle rpm: 5000 Drive power spindle kW: 25/22 Spindle bore mm: 73 Chuck type: 8" Manufacturer: KITAGAWA Coolant system High-pressure bar: 10 Equipment Chip conveyor Mist collector Chuck foot switch (double) for main and counter spindle Program restart Gbodpfx Ao Ah Iq Rjm Eew Synchronized tapping Paper band filter Automatic door Robot Automation interface Messenger V4 Working time hours Under power: 7349 Spindle 1: 1370 Rated power kVA: 94 Basic machine dimensions / weight Weight kg: 8800

Condition: new, Three-jaw chuck for DMG MORI NLX 2500 – A8 taper according to DIN/ISO 702-1 Godpfjz Ipmwsx Am Esbw Power chuck with adapter ring and threaded ring for NLX 2500 High-quality three-jaw chuck for the DMG MORI NLX 2500, designed for precise and reliable workpiece clamping in demanding turning operations. The clamping system includes a matching adapter ring with an A8 taper according to DIN/ISO 702-1, as well as a threaded ring that fits the drawtube of the NLX 2500. Scope of delivery Three-jaw power chuck Adapter ring with A8 taper according to DIN/ISO 702-1 Threaded ring to fit the NLX drawtube Design adapted to the machine interface Precise clamping technology from Geiger + Haag Geiger + Haag develops and manufactures power chucks and custom clamping devices for demanding machining tasks. Since its foundation in 1947, precision, reliable clamping technology, and application-specific solutions have been the focus. Through the close connection between design, manufacturing, and customer support, even individual clamping tasks can be implemented quickly and in a practical manner. Our clamping solutions are used, among other applications, in multi-spindle lathes, rotary transfer machines, special machines, and transfer lines. Your individual clamping solution Do you need a chuck for a specific machine, a special taper, or a custom drawtube connection? We develop and manufacture the right solution – tailored to the machine, workpiece, and machining process. Geiger + Haag – Clamping technology for demanding machining tasks.