Used Dmg Mori Seiki Nhx 4000 for sale (190)

Condition: good (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, controller manufacturer: Siemens, controller model: Sinumerik 804D, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, Horizontal machining center DMG MORI NHX 4000 with 2-pallet changer Year of manufacture: 2017 Control: Celos with Sinumerik 840Dsl Operate Program run hours: 21,000 h Technical data: Bledpeyghq Ajfx Aknen Spindle speed: 10 – 20,000 rpm (speedMASTER® motor spindle) Drive power: 35/25 kW Torque: 130/85 Nm Tool holder: HSK 63 Magazine positions: 60 – ring magazine Travel paths: X-axis: 560 mm Y-axis: 560 mm Z-axis: 660 mm C-axis: 0.001° Pallet size: 400x400 mm Equipment: 2-pallet changer Coolant system for through-spindle coolant (IKZ) 70 bar Chip conveyor Renishaw 3D probe

Condition: used, Year of construction: 2017, Technical details: x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm control: Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds: 20 - 20.000 1/min spindle drive: 25/ 35 kW max. torque on the spindle: 86 / 130 tool taper: HSK-A63 Number of tool station: 60 diameter of tools max.: 70 mm Tool diameter with no neighbouring tools: 170 mm tool length - max.: 450 mm weight of tools max.: 12 kg Bjdpfx Aeyqybbeknsln numbers of pallets: 2 Pallet dimension: 400 x 400 mm max. workpiece diameter: 630 mm workpiece height max.: 900 mm table load: 400 kg rapid travel x/y/z: 60 m/min Feed x/y/z: 60 m/min internal coolant system feed: 70 bar weight of the machine ca.: 8,5 t dimensions: 3200 x 4800 x 2900 mm Accerories Rotoclear window Signal lamp 4 colours Electronic handwheel Probe for tool breakage and length measuring Coolant shower Renishaw probe (spindle) Vorbereitung / preparation only HSK cone cleaning station with brushes Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar. The machine has just received a new milling spindle. *

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm Bjdpfxjzyu Umo Aknjln z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 14.000 min/-1 power capacity - main spindel 18,9 / 14 kW max. Torque 100 Nm tool taper HSK A-63 table surface area 630 x 500 mm max. table load 300 kg Swivel range -5 / +110 ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm rapid traverse 24 m/min Feed force 4,8 kN feed speeds 1 - 24.000 mm/min total power requirement 25 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DMG MORI SEIKI - DMU 50 - 5 Axis - swivable rotary table

Condition: ready for operation (used), Year of construction: 2013, operating hours: 26,711 h, This 3-axis DMG Mori Seiki NVX 5080 II/40 was manufactured in 2013. It features an X-axis travel of 800 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine has a weight of 6350 kg and is equipped with a rated power of 34 kVA. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki NVX 5080 II/40 vertical machining center we have for sale. Contact us for further details. • Machine weight: 6350 kg • X-Axis: 800 mm • Y-Axis: 530 mm • Z-Axis: 510 mm • Main electronic connection: 200 V, 3-phase, 50 Hz • Power consumption: 34 kVA • Machine type: Vertical Machining Center • Year: 2013 • Made in: Japan • Serial number: NV502130709 Bodpsz Akwpsfx Aknsln • Machine connected and available for inspection/testing.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 6,100 kg, number of axes: 4, This 4-axis DMG Mori Seiki NL2500Y/700 was manufactured in 2006. It features a robust control unit, MORI SEIKI MSX-850, and includes an integrated mist extraction unit, chip conveyor, tailstock, turret, and tool setter. With a mass of 6100 kg, this turn-mill centre is designed for high-performance machining. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki NL2500Y/700 machine we have for sale. Contact us for further details. Blodpsz A Uz Njfx Aknsn - Phase: 3- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 113 A- Current Rating of the Spindle Motor: 140 A- Interrupting Capacity: 5 kA- Short Circuit Rating: 1 kA- Rated Power: 39 kVA- Mass of Machine: 6100 kg- Control Unit: MORI SEIKI MSX-850- Additional Equipment / Attachments: Integrated mist extraction unit (SARA UC1 SDIV), chip conveyor / chute integration, tailstock, turret, tool setter / probe arm Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2005, operating hours: 7,500 h, spindle motor power: 18,500 W, spindle speed (max.): 3,500 rpm, travel distance Y-axis: 120 mm, overall weight: 5,800 kg, number of axes: 4, This 4-axis DMG Mori Seiki SL 2500 Y was manufactured in 2005. It features a maximum swing diameter of 755 mm and a machining diameter of 390 mm, with a maximum machining length of 655 mm. The machine includes a 12-station turret and a programmable hydraulic tailstock. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki SL 2500 Y turn-mill centre we have for sale. Contact us for further details. • Capacity & working area: • Max. swing diameter: 755 mm • Max. machining diameter: 390 mm • Max. machining length: 655 mm • Bar capacity: 75 mm • Rapid traverse: 18 m/min (X) / 24 m/min (Z) • Guideways: Box ways on all axes • Main spindle & headstock: • Spindle torque: 640 Nm • Spindle nose: A2-8 • Chuck: 250 mm Kitagawa B-210 (metric) • Cooling: Daikin spindle oil chiller • Turret & live tooling: • 12-station turret (all stations motorized) • Turret indexing time: 0.2 s • Live tooling speed: 4,000 RPM • Live tooling motor: 5.5 kW • Tooling system: Sandvik Capto quick change tooling system (valued at €22,000–€24,000) • Tailstock & axes: • Axis configuration: 4-axis (X, Z, Y, C) • Tailstock: Programmable hydraulic tailstock • Tailstock taper: MT5 Morse taper • Control, software & measuring: • 3D graphic simulation via proprietary CAM software • Cycle time verification • Automatic load control & tool wear monitoring Bodpfszuymqex Aknjln • Tool measurement: Automatic Renishaw tool presetter arm • Connectivity: USB, PCMCIA, RS-232 Additional equipment • Bar feeder interface (machine prepared) • Interface for Autoblok hydraulic steady rest (ready for installation) • Automatic parts catcher • Hinge-type side chip conveyor • Large assortment of static and live tool holders • Dual foot pedal (main chuck & tailstock operation) • Electrical transformer • Complete documentation: Parts list, electrical schematics, programming & operating manuals Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2017, operating hours: 6,473 h, functionality: fully functional, machine/vehicle number: 12780000173, DMG MORI NHX 5000 Bsdjyhwpwjpfx Aknjln About the Machine: High-precision and reliable machine. Available immediately. Technical Data: - Control: Siemens 840D - Travel X-, Y-, Z-Axis: 730/730/880 mm - C-Axis Travel: 360° - Rotary Table Clamping Surface: 500x500 mm - Spindle Speed: 20-15,000 rpm - Tool Interface: SK40 - Tool Magazine with 60 positions - Pallet changer with 2 stations - Automation-ready Equipment: - Internal cooling, 70 bar with belt filter system - Work area rinsing - BLUM measuring probe - Rinse gun - Chip conveyor - Signal light - Handheld control device Inspection / test under power on site can be arranged by appointment. We are happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We at Baumgärtner CNC GmbH specialize in: - Service - Maintenance - Overhauling - Automation for DMG machines and other renowned manufacturers. We accompany you—from the machine purchase, through transport and installation, all the way to commissioning and ongoing maintenance or repair work. You can rely on us.

Condition: good (used), Year of construction: 2016, Contact us for more information Bodpjy Enr Sjfx Aknjln

Condition: excellent (used), Year of construction: 2012, Technical data: 3-axis machine: X, Y, Z Travel ranges (X/Y/Z): 635 / 510 / 460 mm CNC control: SIEMENS 840D Table size: 790 x 560 mm Max. workpiece weight: 600 kg Tool holder: SK 40 Number of positions in the tool changer: 30 Spindle speed: 20 – 12000 rpm Motor power: 13 kW Dimensions (length x width x height): approx. 3400 x 2450 x 2800 mm Machine weight: approx. 4.3 tons Condition: very good condition, little use Bodszn Ranspfx Aknsln The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2012, Milling machines Travel distance X: 700 mm Travel distance Y :420 mm Travel distance Z: 380 mm HSC-machines Bodpfxsy Nxc Ne Aknsln Number of axis: 3 milling machine / machining center spindle revolutions: 24000 rpm Speed range to: 24000 U/min tool changer: 38 - time input Power : 20 kW Integrated 4th axis (TSUDAKOMA)

Condition: used, Year of construction: 2013, x-travel 735 mm y-travel 650 mm z-travel 560 mm control 840D sl FD operate Siemens turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 35 / 24 kW max. Torque 119 Nm tool taper HSK-A63 DIN 69893 table diameter 680 mm max. table load 600 kg max. workpiece sizes 650 x 650 x 500 mm swivellable +/- 120 ° rotatable 360 ° number of toolpositions 30 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8,0 kg change-time chip to chip ca. 4,9 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min total power requirement 65 kVA weight of the machine ca. 11,6 t dimensions of the machine ca. 4,0 x 3,0 x 2,95 m 5 Axis CNC - MachiningCenter Universal DMG - DMU 65 FD monoBLOCK - Swivel-Rotary-Table - without tools - only 8,444 operating hours - only 2,246 spindle hours - Air blast cooling through spindle center - MDynamics package - Power failure safety package - Coolant ring jet: 7x air jets, 13x water jets Bljdpfx Akezipzysnjn - Tropical package (35° – 50° Celsius) - Coolant unit (ICS) with two pressure levels: 40 and 80 bar - Use of special tools (18 kg / 370 mm)

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 540 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis DMG Mori Seiki LaserTec 50 was manufactured in 2019. It features a Celos with Siemens 840D sl Operate control, integrated ytterbium cw fiber laser, and a compact design with a 4 m² footprint. Ideal for machining diamond tools with dimensions up to Ø 355 mm and 420 mm in length. If you are looking to get high-quality laser machining capabilities, consider the DMG Mori Seiki LaserTec 50 machine we have for sale. Contact us for more information. Bsdpfx Akoyfv Tvsnoln • Control: CELOS with Siemens 840D sl Operate; 21.5" ERGOline Control with multi-touch screen • Processes: Laser fine cutting, laser drilling, laser welding • Work capacity: Machining diamond tools up to Ø 355 mm and 420 mm in length • Axes/table: NC swivel rotary table; 5-axis transformation; high-dynamic torque motors in B and C axes • Drives: Linear drives in X/Y with acceleration > 1 g • Laser source: Integrated ytterbium CW fiber laser; 450 W QCW ytterbium fiber laser with 4,500 W pulse peak power and 450 W average power • Processing head: 80 mm focal length; collision switch • Vision: Camera through beam path for fiber laser • Construction: Solid mineral cast base • Footprint: Approx. 4 m² • Condition/usage: ~100 working hours (as new) • Notes: CNC precision laser machine with high-speed processing; highly dynamic and precise Additional equipment • Fanuc robot automation • Keller automatic extraction system • Basement exhaust extraction system

Condition: excellent (used), Year of construction: 2012, Technical specifications: 5-axis machine: X, Y, Z, C, B Travel distances (X/Y/Z): 500 / 450 / 400 mm Travel range B axis: +110/-5° Travel range C axis: 360° CNC control: SIEMENS 840D Table width: 500 mm Table diameter: 630 mm Table angle adjustable in degrees Max. workpiece weight: 200 kg Number of tool changer positions: 30 Spindle speed: 20 – 10,000 rpm Bjdpsyzzpvsfx Akneln Motor power: 13 kW Dimensions (L x W x H): approx. 3400 x 2550 x 2200 mm Machine weight: approx. 4.8 t Additional equipment: Workpiece measuring probe Chip conveyor Condition: Very good condition, little used, approximately 12,850 operating hours

Condition: excellent (used), Various accessories for DMG Mori NLX. 1- AWG EWS 50.60V5NLIK (Axial boring and milling head, offset axis, EWS - Varia) 2- EWS63.6032NL (Rotating, continuously adjustable swivel head) 3- 2 pcs. 17.BMT40NL (Combination holder for internal and external cooling, diameter 40 mm) 4- 2 pcs. 17.BMT50NL (Combination holder for internal and external cooling, diameter 50 mm) 5- Bljdpfx Aozfh T Toknsn 2 pcs. 8.BMT25NL (Cross mount, steel height 25) 6- 2 pcs. 4.BMT25NLIKX95 (Longitudinal mount, steel height 25) 7- 2 pcs. 4.BMT25NLX70 (Longitudinal mount, steel height 25)

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 00820002981, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 3,600 rpm, spindle bore: 118 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 102 mm, total height: 2,500 mm, total length: 8,000 mm, total width: 2,400 mm, overall weight: 10,000 kg, controller manufacturer: DMG, controller model: ERGOLINE, input voltage: 400 V, input frequency: 50 Hz, input current: 125 A, nominal power (apparent): 74 kVA, operating hours of spindle: 4,439 h, Equipment: chip conveyor, DMG MORI CTX BETA 800 TC CNC turning and milling center Bsdpjzxx Dcofx Aknjln - Note: the spindle hours may increase slightly! - Swing diameter: 500 mm - Distance between centers: 1020 mm - Max. workpiece weight (chuck parts/chuck weight): 100 kg - Max. workpiece center of gravity from spindle flange: 120 mm - Travel X1: from -10 to 490 mm - Travel Y1: +-100 mm - Travel Z1: 845 mm - Travel Z2: 600 mm - Travel Z3: 800 mm - Spindle flange diameter: 220 H 5 mm - Chuck diameter: 315 mm - Diameter of front bearing: 160 mm - Rapid traverse speed, Z-axis: 40 m/min - Resolution, Z-axis: 0.001 mmm - B-axis max. swivel speed: 70 rpm - Angular resolution: 0.001° - Tailstock travel: 800 mm - Quill force: 8 kN The machine is equipped with a tailstock and a three-jaw chuck, diameter: 250 mm, as well as a chip conveyor and coolant system. FCA D-63843 Niedernberg - loaded onto a truck.

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, workpiece weight (max.): 3,000 kg, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, tool weight: 27,000 g, We offer in good condition DMG Mori NHX8000 from 2015 with following options: 30/25 KW 15.000 RPM Spindle SK50 Mapps 4S Control 60 tool ATC 800x800 pallet 3.000 kg max table load Signal light 40 bar Internal coolant Touch probe Machine will be in stock in 2 weeks Blsdpfx Akozlqw Ijnsn

Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG Mori M1 milling machine (version with 12,000 rpm, spindle cooling). Year of manufacture: 2022. Very good condition, inspected by DMG service. Low operating hours, only 1,316 spindle hours. Machine can be connected and tested on-site. Bledpfxezr Ruge Aknsn

Condition: excellent (used), Year of construction: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm control Fanuc MSX-701III Maximum turning diameter 660 mm Max. turning length 1498 mm Bodoy Spuujpfx Akneln Diameter over cross slide max. 400 mm number of spindle speeds 3000 U/min tool piece magazine with 40 Plätzen turret 10 Fach total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm

Condition: used, Year of construction: 2023, operating hours: 2,031 h, functionality: fully functional, machine/vehicle number: 9088000015A, feed length X-axis: 1,100 mm, feed length Y-axis: 550 mm, feed length Z-axis: 510 mm, controller model: Sinumerik One, workpiece weight (max.): 1,700 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,700 kg, overall weight: 6,950 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 2,031 h, spindle nose: SK40, number of slots in tool magazine: 24, Equipment: documentation/manual, We offer the transfer of a lease (cession) for a used DMG MORI M2 milling machine. Machine type: M2 Serial number: 9088000015A Year of manufacture: 2023 (first start-up: end of December 2024) Maximum spindle speed: 10,000 rpm Weight: 6950 kg X/Y/Z: 1100 × 550 × 510 mm Table: 1400 × 600 mm Bljdpfxez Hl Ihe Aknen Spindle: up to 10,000 rpm SK40 Sinumerik One High rigidity thanks to the monobloc bed and fixed table (maximum load 1700 kg) First owner Price: LEASE TRANSFER Cession amount: 0.00 PLN Lease installment: 1340 EUR/month (currently the 21st installment out of 72), Total amount of installments to be paid: 68,340 EUR Lease buyout amount: 4200 EUR. The price stated in the advertisement is an indicative value for the entire lease agreement.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Technical data: • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg • Voltage: 400 V / 50 Hz Equipment: • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) • High-pressure coolant system • Chip conveyor Bledpfeziz S Djx Aknjn • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned • Geometry fully checked • Geometry report created • Measuring probe newly calibrated • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed • Operator training provided The machine was subsequently fully inspected and approved by DMG MORI.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 4,500 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 830 mm, controller manufacturer: SIEMENS, controller model: 840 D Operate 4,7, number of slots in tool magazine: 12, number of axes: 4, This 4-axis DMG MORI CLX 450 V6 was manufactured in 2019. It features a maximum Z-axis travel of 830 mm and X-axis travel of 750 mm, along with a counter spindle capable of 5000 rpm. The machine includes a bar package, pneumatic workpiece ejection device, and a chip conveyor. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V6 horizontal turning machine we have for sale. Contact us for further details. Bledpfxez Ibqze Aknjn • Counter spindle: A2-6, 5000 rpm • Tailstock function for counter spindle • Alternating speed cycle (control function) • Hand wheel Additional equipment • Bar package and bar feeder interface • Hainbuch Spanntop NOVA combi pull-back, size 80 (main spindle collet chuck) • Pneumatic workpiece ejection device for counter spindle • SMW BB-D 210 for counter spindle (chuck) • High-pressure coolant, 12 bar • Coolant spray gun • Marposs manual tool measuring probe • Chip conveyor • Bar feeder (will follow) • All tool holders shown in pictures (will follow) Technical Specification Counter Spindle Yes Driven Tools Yes Taper Size VDI 40

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, spindle motor power: 11,000 W, total height: 2,120 mm, overall weight: 5,500 kg, product length (max.): 2,900 mm, number of axes: 3, This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details. • Operating hours: 11,996 • Control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm • Turret: 12 stations (all driven), indexing time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW Bedjyg Icljpfx Akneln • Tailstock: programmable (B-axis), stroke 564 mm • Coolant pump • Oil cooler • Electronic handwheel • 3-color status lamp • Air-conditioned electrical cabinet • Condition/availability: machine in perfect condition; excellent appearance; very good condition; videos available; immediately available Additional equipment • Chip conveyor • Bar feeder interface • Bar feeder: SAMSYS MULTI-3000 (short bar, 1000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus size 65 • HAINBUCH collets: Ø 6.5 – 10 – 16 – 18 – 20 – 25 – 26 – 30 – 40 mm • Square collets: 20×20 – 35×35 – 40×40 mm • Hex collet: 14 mm • Tool measuring probe arm • 7 driven toolholders (3 axial, 4 radial) • 15 static toolholders • Parts catcher • Automatic door opening/closing • Isolation transformer • Documentation & CD-ROM • Transport and handling clamping brackets

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,202 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, table load: 800 kg, overall weight: 5,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DMG MORI CMX 800V was manufactured in 2020. It features an X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine has a maximum spindle speed of 12,000 rpm and a robust table load capacity of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 800V vertical machining centre we have for sale. Contact us for further details. Blodsz Hb Tajpfx Aknon • Spindle: • Max torque: 83 / 57 Nm • Working range: • Rapid traverse (X/Y/Z): 30 / 30 / 30 m/min • Hours (approx.): • Operating: 12,138 h • Machining: 3,202 h

Condition: ready for operation (used), Year of construction: 2014, operating hours: 15,894 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: SIEMENS, controller model: 840D sl, total height: 2,800 mm, total width: 3,000 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, product length (max.): 5,500 mm, number of axes: 4, This 4-axis DMG MORI NHX5000 horizontal machining centre was manufactured in 2014. It features a travel of 730 mm in both the X and Y axes, and 880 mm in the Z axis. The machine has a maximum spindle speed of 12,000 rpm and can handle workpieces weighing up to 500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX5000 machine we have for sale. Contact us for further details. Blodpfx Ajz E I R Neknjn - Max. Torque: 102 Nm- Max. Workpiece Weight per Pallet: 500 kg- Max. Workpiece Diameter: 630 mm- Max. Workpiece Height: 900 mm- B-axis Indexing (Table): 360 x 1 degree- Max. Feed Rate: 60,000 mm/min- Rapid Traverse: 60 m/min- Jog Feed Rate: 0 – 5,000 mm/min- Total Power Requirement: 57 kVA- Space Requirement (LxWxH): 5.5 x 3.0 x 2.8 m- Pallet Changer: 2-fold, pallet size 500 x 500 mm- Equipment & Accessories: Chip conveyor, high-pressure coolant unit (40 bar), internal coolant supply (IKZ), tool changer, documentation, Renishaw PP60op measuring probe Technical Specification Taper Size SK 40

Condition: like new (used), Year of construction: 2022, operating hours: 458 h, functionality: fully functional, machine/vehicle number: 1536582684A, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 30 kVA, torque: 83 Nm, workpiece height (max.): 550 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 3,200 mm, total length: 4,500 mm, total width: 3,500 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13 W, number of spindles: 3, number of slots in tool magazine: 30, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this DMG MORI CMX 50 U universal machining center, in like-new condition. Operating hours: Power-on hours: 458 h / Spindle: 330 h, year of manufacture 2022. TECHNICAL DATA Axis travels: • X = 500 mm • Y = 450 mm • Z = 400 mm • B = -5° / +110° • C = n × 360° Work table: • 630 × 500 mm pivoting rotary table • 7 T 14 H7 grooves, 63 mm pitch • Central hole Ø 30 H6 • Permissible table load: 200 kg • Axis – table distance: 150–550 mm Main spindle (inline spindle): • Speed: 20 – 12,000 rpm • Power: 13 kW (40% DC) / 9 kW (100% DC) • Torque: 83 Nm (40% DC) / 57 Nm (100% DC) • Tool shank: SK40 DIN 69871 • Clamping according to DIN 69872, hydraulic control • Clamping force SK40/BT40: 10 kN Bsdpfx Ajz Epnvjknjln Tool magazine: • 30 positions, chain with double gripper • Max. tool diameter: 80 mm (130 mm with adjacent pockets free) • Max. tool length: 300 mm (from the spindle face) • Max. tool weight: 8 kg • Max. magazine load: 120 kg • Tool change time: 2.7 s Feeds and accuracy: • Rapid feed rate X/Y/Z: 30 m/min • Max. feed force (40% DC): 4.5 kN • Linear guide rails with rollers on all axes • Direct measuring system on X, Y, Z (including air purge) • Positioning accuracy X/Y/Z: A = 6 µm (ISO 10791-4) • Repeatability X/Y/Z: R = 5 µm (ISO 10791-4) • Accuracy B/C: A = 16 seconds of arc (ISO 10791-4) • Repeatability B/C: R = 12 seconds of arc (ISO 10791-4) INCLUDED EQUIPMENT Base machine: • CMX 50 U universal machining center (C-A3390F) • DMG MORI SLIMline Multi-Touch 19" / Siemens 840D SL control (C-B3097F) • Coolant or air, switchable via M functions • Chip tray / drawer • Enclosure with sliding door • DMG MORI IoTconnector included as standard 20 bar production package with chip conveyor (C-K3661F): • Internal 20 bar coolant supply • Scraper-type chip conveyor, 250 l tank (left) • Washing of bed and ATC arm via M function • Coolant spray gun • External electronic handwheel • Enclosure roof • 4-color signaling lamp • Double cartridge filter (filter change without stopping the machine) Measurement / monitoring: • Renishaw measuring kit for Siemens (C-K4222F): PP40 probe with optical transmission, TS27R tool probe, measuring cycles with tool breakage monitoring, dummy tool and calibration ring • 3D QuickSET for CMX U (C-K2530F) – control and compensation of 5-axis kinematic accuracy Software and documentation: • DXF Import option on Siemens controller (C-G3067F) • Documentation in Romanian • Screen text in Romanian DMG MORI Digital Products: • Digital production package: IoTconnector, machine data connector MDC (OPC UA / MTConnect / MQTT), NETservice (remote diagnostics) • Messenger V4 – machine status in real time • DMG MORI Service Agent – preventive service warning • Machine 3D model in STEP format (upon signing of NDA, for CAD/CAM) NUMERICAL CONTROL – Siemens SINUMERIK 840D SL • TCU30.3 console, NCU720.3B PN • Safety Integrated • 19" multi-touch screen, 1024 × 1280 • Block processing time: 1.5 ms • User memory 16 MB + 4 GB extension (EES) CONNECTIONS • Standard 12,000 rpm: 30 kVA / 47 A / 50 A fuse at 400 V • With 20/40/80 bar package: 32 kVA / 50 A / 63 A fuse at 400 V • Voltage: 400 V / 230 V, 50/60 Hz, ±10% • Air: 6–8 bar, average consumption approx. 30 m³/h