Used Mori Seiki Machining Centers for sale (204)

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) Itedpfx Aozcuyijbveh MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Documentation/Manual Chip conveyor

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki lathe 2 axes (X, Z) Model: SL-300B Year: 1998 CNC: Fanuc MSC-501 3-phase power Itodpfx Abozd R Ikevoh Chip conveyor Documentation

Condition: used, Year of construction: 1995, turning diameter 450 mm turning length 1.125 mm Iedpfx Aexr Rbyobvoth control FANUC MSC 518 turning diameter over bed 520 mm bar material dia. 70 mm x-axis 260 mm z-axis 500 mm spindle tunring speed 30 - 3.000 U/min spindle nose JIS A2-8 spindle bore 80 mm spindle bearing diameter 130 mm Number of tools in turret 12 rapid travel - longitudinal/face 15 m/min power capacity 15/11 kW total power requirement 42 kW weight of the machine ca. 5 t dimensions of the machine ca. 3,6 x 1,7 x 1,8 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - LG 10 portal loading system with workpiece stacking device up to D=200 and max. 10 kg - Kitagawa 250 mm power chuck - Hollow clamping device - Chip conveyor - High-pressure cooling 5 bar - Tailstock Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2006, machine/vehicle number: IntNr231573, A used MORI SEIKI NL 2500/1250 CNC lathe, year of manufacture 2006, is available for sale. The machine is equipped with a MORI SEIKI MSX 850III / MAPPS III control system and an IRCO SIMAG bar feeder for automatic bar loading. Technical data Control: MORI SEIKI MSX 850III / MAPPS III Origin: Japan Design: Slant-bed CNC lathe Centre distance: 1,250 mm Maximum turning length: 1,298 mm Maximum turning diameter: 356 mm Standard turning diameter: 275 mm Swing diameter over bed: 923 mm X-axis travel: 260 mm Z-axis travel: 1,345 mm Spindle speed: up to 4,000 rpm Spindle bore: approx. 80 mm Turret: 12 stations Number of turrets: 1 Chip conveyor Driven tools C-axis Y-axis Machine weight: 7,600 kg Machine dimensions (L x W x H): 5,000 x 2,300 x 2,400 mm The machine can be inspected under power by prior appointment. Iedpfx Abey U Hg Tovsth Technical data and specifications subject to change and error. Sale subject to prior sale.

Condition: used, Year of construction: 2008, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS III greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Lehmann Robot with parts belt for feeding and disposal CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. For shaft parts loading and unloading there is a Lehmann Robot with conveyor belts for loading and unloading. Iedpfx Aozd Su Eebvoth The machine can also be sold without robot. *

Condition: good (used), Year of construction: 2010, operating hours: 5,750 h, functionality: fully functional, turning length: 393 mm, turning diameter: 200 mm, spindle bore: 51 mm, MSX 853 cnc control 3-jaw chuck diameter 210mm 12-fold revolver C-axis Itedpfezd S S Rjx Abveh driven tools tail stock coolant device chip conveyor Technische Daten: / technical details Drehdurchmesser / turning diameter 200 mm Drehlänge / turning lenght 393 mm X-Weg / X-travel 160 mm Z-Weg / Z-travel 450 mm max. Drehzahl Spindel / max. spindle speed 50-3000 UpM /rpm Eilgang X/Z / rapid feed X/Z 24/30 Anzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mm Antriebsleistung Spindel / drive capacity spindle 13,5 kW Gewicht ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1999, x-travel 560 mm y-travel 510 mm z-travel 510 mm Control MSC 502 distance spindle center to table 50 - 650 mm distance Spindlenose and center of table 100 - 610 mm turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 22 / 18,5 kW tool taper MAS BT-40 spindle bearing diameter 70 mm numbers of pallets 2 size of pallet 400 x 400 mm Isdpfezczc Rox Abveth max. workpiecediameter 580 mm max. workpiece height 650 mm switching time 90°: 2,5 sec change time of pallets 6,0 sec number of toolpositions 60 pos. tool taper MAS BT-40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg change-time tool to tool 1,5 sec change-time chip to chip 3,7 sec rapid traverse ( X / Y / Z ) 32 m/min feed speeds 1 - 24.000 mm/min Tipp feed 0 - 1.260 mm/min total power requirement 63 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 5,5 x 4,5 x 2,7 m CNC - Machiningcenter Horizontal MORI SEIKI - SH 400

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, total height: 2,674 mm, table width: 600 mm, table length: 1,350 mm, table load: 1,000 kg, overall weight: 6,400 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, product length (max.): 2,740 mm, number of axes: 3, This 3-axis MORI SEIKI DuraVertical 5100 was manufactured in 2007. It features an X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine has a robust table size of 1350 x 600 mm and a maximum table load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DuraVertical 5100 vertical machining center we have for sale. Contact us for further details. • CNC control: MSC-504 • Distance spindle nose to table: 150–660 mm • Tool magazine: 30 tools, side-mount ATC Iodpfx Abjzc Nfajvjth Technical Specification Taper Size BT 40

Condition: reconditioned (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, CNC controller: MSX-711 (MAPPS IV) Capacity Turning length mm: 1.540 Max. turning diameter mm: ø ø610 (Turret 2 ø274) Swing over bed mm: ø ø660 Swing over cross-slide mm: ø660 (Turret 2 ø300) Turn-mill spindle Full indexing specifications X-axis travel mm: 495 Y-axis travel mm: ±125 Z-axis travel mm: 1.560 B-axis degree: ±120° Speed ​​spindle rpm: 12.000 Drive power kW: 18,5/11 (10 min./cont) Tool magazine Magazine places: 76 Tool holder: Capto C6 Isdpfx Abswztq Ejveth Lower turret Number of tool slots St .: 10 Indexing time s: 0,19 Main spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Counter spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Equipment Spindle 2 with tailstock option Electronic Handwheel Interface High-pressure coolant system Chip conveyor Air blow for chuck and tool tip Auto tool presetter for upper and lower Bar feeder interface Hobbing function

Condition: ready for operation (used), Mori Seiki turret head with 10 positions for Mori Seiki CL-150.200. Shank height for square tools: 20 mm, maximum drill shank diameter: 32 mm, turret indexing time: 0.7 sec, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Itjdpfx Abex Dw Rfovsh

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 6,000 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 310 mm, spindle motor power: 7,500 W, total height: 1,700 mm, total width: 1,700 mm, overall weight: 2,500 kg, bar diameter (max.): 32 mm, controller manufacturer: MITSUBISHI, controller model: MSC-803, product length (max.): 2,500 mm, number of axes: 2, Horizontal turning machine manufactured in 1998. This MORI SEIKI CL 150 features a maximum turning diameter of 400 mm and a maximum turning length of 303 mm. It includes a spindle speed range of 60 - 6000 rpm and a turret with 12 stations for efficient tool management. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI CL 150 machine we have for sale. Contact us for further details. Control Unit Defective: At least data loss or damaged circuit board (unverified diagnosis) • Swing Over Bed: 515 mm • Maximum Turning Diameter: 400 mm • Standard Turning Diameter: 176 mm • Standard Turning Length: 150 mm • Maximum Turning Length: 303 mm • Spindle Centre Height: 950 mm • Spindle Nose: A2-5 Itsdpfxjzcwy So Abvoh • Spindle Bore: 43 mm • Spindle Bearing Inner Diameter: 80 mm • Standard Chuck Diameter: 169 mm • Tool Size for External and Facing Tools: 20 x 20 mm • Number of Turrets: 1 • Number of Turret Stations: 12 • Turret Index Time: 0.7 sec • Turret Clamping Force: 2300 Nm • Index Coupling Diameter: 180 mm • Automatic Tool Selection Logic: Yes • X-Axis Motor Power: 1.5 kW • Z-Axis Motor Power: 2.0 kW • Manual Feed Rate: 0 - 1260 mm/min • Programmable Feed Rate: mm/rev • Rapid Traverse X-Axis: 30 m/min • Rapid Traverse Z-Axis: 30 m/min • Positioning Resolution: mm • Coolant Tank Capacity: 123 l • Coolant Pump Capacity: 13 l/min • Lubrication: Automatic Central Lubrication • Power Supply: 380 V / 3 Phase / 50 Hz • Control Voltage: 200 V AC / 24 V DC • Connected Load: 20 kVA • Rated Power: 23 kVA • Full Load Current: 67 A • Spindle Motor Current Rating: 74 A • Interrupting Capacity: 5 kA • Frequency: 50 Hz • Voltage: AC 200 V • Phase: 3 Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2009, spindle motor power: 18,000 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 795 mm, overall weight: 5,800 kg, number of axes: 5, This 5-axis MORI SEIKI NL 2500 SY was manufactured in 2009. It features a maximum spindle speed of 4,000 rpm, a Y-axis travel of ±60 mm, and a Z-axis travel of 795 mm. The machine is equipped with a robust turret capacity of 12 stations and offers simultaneous turning and milling capabilities. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NL 2500 SY turn-mill centre we have for sale. Contact us for further details. • Rapid traverse rates: • X: 30 m/min • Z: 30 m/min • Y: 10 m/min • Main spindle: • Spindle nose: A2-8 • Max bar capacity: 80 mm • Chuck: Kitagawa B-210, Ø250 mm • C-axis: 360° positioning • Sub-spindle: • Spindle nose: A2-6 • Integrated motor power: 15 kW • Chuck: Kitagawa B-208, Ø210 mm • C-axis: 360° positioning • Parts transfer capability: Yes • Milling/driven tools: • Turret capacity: 12 stations • Driven tool stations: 12 • Driven tool motor power: 5.5 kW • Max driven tool speed: 6,000 rpm • Direct drive tooling, live tool milling, off-centre machining • Turret and tooling: • Turret indexing time: 0.2 sec • Automatic tool measurement: Dual Renishaw tool measuring arms • Mechanical construction: • Guideways: Hardened box ways (prismatic) on all axes • Spindle drive: Built-in integrated motors • Transmission: Direct drive (no belts/gearboxes) • Starting torque: 640 Nm • CNC control: Ijdpfx Abezcp Hqovoth • Control: Mori Seiki MAPPS IV • Conversational programming, load monitoring, tool wear/consumption monitoring • Cooling and lubrication: • Main spindle oil cooler: Daikin • Sub-spindle oil cooler: Daikin • Connectivity: • USB, PCMCIA, RS-232 • Bar feeder interface: Included • Machining capabilities: • Simultaneous turning and milling • Y-axis machining • Polar coordinate interpolation • Off-centre drilling and tapping • Front and back working with sub-spindle • Complete part machining in a single setup • Complex multi-axis machining • Typical applications: • Precision turned components • Aerospace parts • Automotive components • Hydraulic components • Medical components • General precision engineering Additional equipment • LNS automatic bar feeder, 1.5 m capacity • Automatic parts catcher • Chip conveyor: Side-mounted hinge belt type • Independent chuck foot pedals (main and sub-spindle) • Electrical transformer • Documentation package: • Operation manual • Programming manual • Parts list • Electrical schematics • Tool holders: Static and driven tool holders included • Other optional equipment: Not included Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, overall weight: 6,140 kg, number of axes: 4, This 4-axis MORI SEIKI NLX 2500Y was manufactured in 2013. It features a maximum swing over bed of 742 mm and a maximum turning diameter of 366 mm. The machine includes a powerful spindle motor with 18.5 kW and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NLX 2500Y horizontal turning machine we have for sale. Contact us for further details. Itjdpszcphnsfx Abvsh • Control unit: M730 BM • C-axis0.001° indexing • Maximum swing over bed: 742 mm • Maximum turning diameter: 366 mm • Maximum turning length: 705 mm • Maximum bar capacity: 80 mm • Spindle nose: ASA 8" • Tailstock: MT5 • Tailstock quill diameter: 80 mm • Tailstock travel: 734 mm • Turret stations: 12 positions • Motorized tool positions: 12 • Turret tool coupling: BMT • Turning tool size: 25 × 25 mm • Boring bar capacity: 50 mm • Maximum driven tool speed: 6,000 rpm • Driven tool motor power: 5.5 / 7.5 kW Additional equipment • Chip conveyor • Parts unloader arm • Parts conveyor belt • High-pressure pump with paper filter tank • Optical scales Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, overall weight: 5,500 kg, number of axes: 3, This 3-axis MORI SEIKI NLX 2500M was manufactured in 2011. It features a maximum turning diameter of 366 mm and a maximum turning length of 705 mm. The machine is equipped with a powerful spindle motor of 18.5 kW and a turret with 12 positions for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NLX 2500M horizontal turning machine we have for sale. Contact us for further details. • Control unit: MSX-853IV • Maximum swing over bed: 787 mm • Maximum turning diameter: 366 mm • Maximum turning length: 705 mm • Maximum bar capacity: 80 mm • Spindle nose: ASA 8" • Tailstock: MT5, 80 mm quill diameter, 734 mm travel • Turret stations: 12 • Motorized/live tool positions: 12 • Turret interface: BMT Itjdpfx Abezcpcxevjh • Turning tool size: 25 × 25 mm • Boring bar capacity: 50 mm • Maximum live tool speed: 6,000 rpm • Live tool motor power: 5.5 / 7.5 kW • Operating time: 212 h 39 min • Cutting time: 140 h 19 min • Power-on time: 15,408 h 57 min Additional equipment • Chip conveyor • Various/assorted tool holders Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 12,000 rpm, overall weight: 13,000 kg, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, spindle motor power: 18,500 W, tool weight: 8,000 g, number of axes: 5, This 5-axis MORI SEIKI NMV 5000DCG was manufactured in 2008. It features a maximum X-axis travel of 730 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a spindle speed of 12,000 rpm, a magazine capacity of 60 tools and an automatic pallet system. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NMV 5000DCG universal machining centre we have for sale. Contact us for further details. • B-axis rotation: +160° / -180° • C-axis table: 360,000 positions (0.001° resolution) • Rapid traverse (X/Y/Z): 50 / 50 / 50 m/min • Maximum torque: 135 Nm • Turning function: Integrated in table • Max. turning diameter: 450 mm • Max. swing diameter: 700 mm • Tool magazine capacity: 60 tools • Max. tool diameter: 125 mm • Max. tool length: 300 mm • Spindle cooling: Oil cooling system • Zero point: Automatic adjustment and dynamic correction (8 points) • Cutting control: Automatic power control • Program memory: 2 MB • Custom macro: 999 variables • Tool life management: 128 × 2 groups • Status: Currently operational; inspection by Mori Seiki technician available Additional equipment • Pallet system: Automatic robot for loading/unloading • Measurement: Renishaw tool and part probing systems Ijdpfeym Dbqsx Abvoth • Cooling: Independent high-pressure coolant system (40 bar) • Chip management: Rear chip conveyor • Power: Electrical transformer • Documentation: Full manuals, parts list, and electrical schematics • Tooling and pallets included; estimated value €50,000–€55,000 Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2007, turning diameter max. 356 mm turning length 705 mm control MSX 850 III MAPPS Mitsubishi greates pass round over bed 923,8 mm Swing dia. over traverse guideway 755 mm standard turning dia. 275 mm max. spindle speed 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW Iedpfjzb N Uxsx Abvsth spindle nose JIS A2-8 spindle bearing diameter 140 mm spindle bore 91 mm max. bar capacity 80 mm chucking diameter 305 mm C-Axis 0,001 ° Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm chucking diameter 210 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Shank diameter 26 mm Drill shank diameter 50 mm Spindle speed - driven tool stations max. 6.000 min -1 turret change time 0,25 sec. x-axis 260 mm z-axis 795 mm b-axis 734 mm feed speeds max. 30.000 mm/min rapid traverse X/Z/B: 30 m/min rapid traverse C: 400 min/-1 total power requirement 39 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC - Turning- and MillingCenter MORI SEIKI - NL 2500 SMC / 700 - Tool-Drive - C-Axis - Subspindle - WITHOUT extraction system

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,523 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 245 mm, travel distance Z-axis: 570 mm, spindle motor power: 7,500 W, total height: 1,810 mm, total width: 1,640 mm, overall weight: 3,390 kg, product length (max.): 1,990 mm, number of axes: 2, Horizontal turning machine manufactured in 2003. This MORI SEIKI CL 1500 T features a Kitagawa power chuck and includes a tailstock, tool measuring system, and tool holders. With production hours of 1523, this machine offers reliable performance for turning applications. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI CL 1500 T machine we have for sale. Contact us for further details. • Control: MSG-805 V (MAPPS) • Maximum Swing Diameter: 510 mm • Recommended Turning Diameter: 176 mm • Maximum Machining Diameter: 420 mm • Maximum Turning Length: 570 mm • Spindle Nose: A2-5 • Spindle Bore: 43 mm • Spindle Bearing Diameter: 80 mm • Bar Capacity: 33 mm • X-Axis Servo Motor: 1.5 kW • Z-Axis Servo Motor: 2.0 kW • Rapid Traverse X-Axis: 24 m/min • Rapid Traverse Z-Axis: 24 m/min • Feed Rate Range: 0 – 1,260 mm/min • Resolution: 0.001 mm • Positioning Accuracy X-Axis: 0.004 mm • Positioning Accuracy Z-Axis: 0.004 mm • Repeatability X-Axis: ±0.003 mm • Repeatability Z-Axis: ±0.003 mm • Tailstock Quill Diameter: 85 mm • Tailstock Taper: MT4 • Tailstock Quill Stroke: 120 mm • Tailstock Travel: 340 mm • External Tool Size: 20 × 20 mm • Internal Boring Bar Capacity: Ø32 mm Itedpszb Ipnjfx Abvjh • Number of Turret Stations: 12 • Turret Index Time: 0.7 sec • Turret Clamping Force: 2300 Nm • Index Coupling Diameter: 180 mm • Automatic Turret Direction Logic: Yes • Coolant Tank Capacity: 150 L • Coolant Pump Flow Rate: 13 L/min • Automatic Central Lubrication: Yes • Power Supply: 400 V / 3 Phase / 50 Hz • Control Voltage: 200 V AC / 24 V DC • Connected Load: 17.3 kVA • Chuck: Kitagawa B-206 A5 Hydraulic Power Chuck • Tailstock: Hydraulic • Tool Presetter: Included • Tool Holders: Included • Dual Foot Switch: Included • Reinforced Coolant Pump: 20 L/min • Reinforced Coolant Pump Pressure: 5 bar • Reinforced Coolant Pump Motor Power: 1.1 kW • Chip Conveyor: optional, not included Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,688 h, travel distance X-axis: 235 mm, travel distance Z-axis: 1,045 mm, overall weight: 2,160 kg, number of axes: 2, This MORI SEIKI SL 1000 was manufactured in 2000. It features a robust Kitagawa Power Chuck and extensive tool holders, making it suitable for various turning applications. With a machine weight of 2160 kg and a rated power of 23 kVA, it offers reliable performance. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL 1000 horizontal turning machine we have for sale. Contact us for further details. • Phase: 3 • Frequency: 50 Hz • Voltage: AC 200 V • Full Load Current: 67 A • Spindle Motor Current Rating: 64 A • Interrupting Capacity: 5 kA • Rated Power: 23 kVA • Machine Weight: 2160 kg • Control: MSG-803 (MAPPS) • Chuck: Kitagawa Power Chuck • Power On Time: 7267 h • Auto Machining Time: 6688 h • Extensive Tool Holders Included • Chip Conveyor: Optional, not included Itodjzb Indepfx Abvjh Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1996, spindle speed (max.): 6,000 rpm, travel distance X-axis: 191 mm, travel distance Z-axis: 371 mm, number of axes: 2, Horizontal turning machine manufactured in 1996. This MORI SEIKI CL 15 features a Z-axis travel of 371 mm and a spindle speed of 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI CL 15 machine we have for sale. Contact us for further details. Iedpfxozb Il As Abveth technician requiredX-Axis Travel: 191 mmZ-Axis Travel: 371 mmSpindle Speed: 6,000 rpm Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1990, spindle speed (max.): 4,500 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, spindle motor power: 7,500 W, number of axes: 2, Horizontal turning machine manufactured in 1990. This DMG Mori Seiki SL00 features a Kitagawa power chuck and includes a bar collet chuck for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki SL00 machine we have for sale. Contact us for further details. • Control: Fanuc • Chuck: Kitagawa Power Chuck • Bar Collet Chuck: Yes • Voltage: 380 V • Phase: 3 • Frequency: 50 Hz • Power Consumption: 18 kVA • Cable: 3 • Chip Conveyor optional, not included Iodpfxjzb Ihdo Abvoth Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2008, turning diameter max. 420 mm turning length 713 mm control MSX 850 III MAPPS Mitsubishi swing over bed 995 mm Swing dia. over traverse guideway 825 mm max. turning diameter 420 mm max. bar capacity 90 mm Itsdpszb N Ulofx Abvjh turning speed range - main spindle max. 3.000 min/-1 power capacity - main spindel 30 / 25 kW spindle nose JIS A2-8 spindle bearing diameter 160 mm spindle bore 105 mm max. bar capacity 90 mm C-Axis 0,001 ° x-axis 280 mm z-axis 820 mm Tooling 12 Pos. Schank height for square tool 25 mm Diameter of boring bar 50 mm turret change time 0,3 sec. Spindle speed - driven tool stations max. 6.000 min -1 power capacity driven tool-stations 5,5 / 3,7 kW rapid traverse X-axis 30 m/min rapid traverse Z-axis 30 m/min rapid traverse C-axis 300 min/-1 tailstock 734 mm diameter of quill 110 mm taper of center MK 5 total power requirement 46 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 5,0 x 3,0 x 2,5 m CNC - Turning- and Milling Center MORI SEIKI - NL 3000 MC / 700 - Operating time: approx. 9,595 hours - Processing time: approx. 7,552 hours - WITHOUT extraction system

Condition: ready for operation (used), Year of construction: 2010, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, total height: 2,187 mm, overall weight: 6,360 kg, number of axes: 5, This 5-axis MORI SEIKI NLX 2500 SY/700 was manufactured in 2010, featuring a max swing over bed of 590 mm and a cutting length of 795 mm. It includes Y and C axes, a sub-spindle, and high-pressure coolant system. Capable of handling bar work up to 80 mm, it's equipped with a chip conveyor and automatic bar feeder. Consider the opportunity to buy this MORI SEIKI NLX 2500 SY/700 turn-mill centre. Contact us for more information about this machine. Machine Benefits Technical machine benefits: • Jog Feedrate X, Z, B, Y Axis: 0–5000 mm/min • Max Cutting Diameter: 460 mm • Max Cutting Length: 795 mm • Bar Work Capacity: 80 mm Itsdpfsx D Sc Nox Abvsh • Spindle Automatic Tool Setter: Included • Sub-Spindle Tool Setter: Included • Spindle Speed Ranges: 2 • Spindle Nose: JIS A2-8 • Through-Spindle Hole Diameter: 91 mm • Total Power: 40 kVA Extra information Sub-Spindle:C Axis in Sub-Spindle: IncludedC Axis Index in Sub-Spindle: 0.001°Sub-Spindle Speed: 6000 rpmSub-Spindle Speed Ranges: 1Sub-Spindle Nose: JIS A2-5Sub-Spindle Through Hole Diameter: 43 mmSub-Spindle Drive Motor: 11 / 7.5 kWSub-Spindle Chuck Ø: 170 mmHead Chuck Ø: 250 mmMedia:High Pressure Coolant: IncludedChip Conveyor: IncludedFume Extractor: IncludedAutomatic Barfeed: Hydrafeed Multiservo Mod MSV, IncludedPart Catcher: IncludedTurret:Rotary Tool Positions in Turret: 12Rotary Tool Spindle Rate: 6000 rpmTool Size: 25 × 25 mm1 Radial Driven Tool Holder: Included1 Axial Driven Tool Holder: Included Dimensions Machine Depth 3994 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * Y-axis. * C-axis. * 5-axis machine. * 1.5-meter Lns Quick Load bar feeder. * Sub-spindle. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gearboxes. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. Ijdpfx Abszd Nv Hovjth * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar feeder. * Automatic workpiece collector. * Dual pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor. * Extensive range of static and motorized tool holders. Iasdbq Hnuozcdf Uepeu * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. * Weight: 5,800 kg. * Machine is currently in operation. * It is essential to check the precision videos. * Immediate delivery, unless sold immediately.

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 810 mm, number of axes: 8, This 8-axis MORI SEIKI NZ-2000/T2/Y2 was manufactured in 2008. It features a twin-spindle design with a maximum Z-axis travel of 810 mm and X-axis travel of 210 mm. The machine is equipped with two turrets, each with 16 stations, suitable for complex multi-process turning and milling operations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NZ-2000/T2/Y2 turn-mill centre we have for sale. Contact us for further details. • Control/NC • Control unit: MORI SEIKI MSX-701 • NC system: FANUC FS-31iA (MAPPS 3); MAPPS version: 3 • Software/features: Load monitor; Tool life management; Number of stored programs: 250; User memory: 50 MB; Tool offset pairs: 99; Custom macro variables: 600 • Languages: NC and MAPPS screens in Italian • Electricals/destination • Voltage: 380–480 V; Frequency: 50 Hz; Destination: Europe • Machine configuration • Bed length: 800 mm • C-axis on both spindles • 2 turrets with X-Y-Z axes • Both turrets originally equipped with live tooling • Lower turret live tooling currently NOT working (turning functions OK) • Suitable for complex multi-process turning and milling • Spindles • Main spindle (Spindle 1) • Through-hole diameter: 73 mm • Chuck type: Hollow chuck 8"; Chuck through-hole: 65 mm; Chuck manufacturer: KITAGAWA • C-axis: Included; Spindle orientation: Included (without lock); C-axis brake: Included • Sub spindle (Spindle 2) • Power: 25/22 kW; Speed: 5,000 rpm • Through-hole diameter: 73 mm • Chuck type: Hollow chuck 8"; Chuck through-hole: 65 mm; Chuck manufacturer: KITAGAWA • C-axis: Included; Spindle orientation: Included (without lock); C-axis brake: Included • Axis travels • B: 810 mm • Max. distance between spindle noses: 1,130 mm • Turrets • Turret 1: Axes X-Y-Z; 16 stations; Milling function included; Rotary tool speed: 6,000 rpm; Tool mounting: By bolts • Turret 2: Axes X-Y-Z; 16 stations; Milling function present but NOT working; Rotary tool speed: 6,000 rpm; Tool mounting: By bolts • Backward tool max lengths: 155 mm (upper turret), 100 mm (lower turret) • Tool presetting • Spindle 1 in-machine tool presetter: Manual (detachable) • Spindle 2 in-machine tool presetter: Manual (detachable) • Coolant/chip (machine-integrated) • High-pressure coolant system: 635 W / 1040 W • Coolant type: Water-soluble • Through-spindle air blow: Included • Chip disposal direction: Right • Interfaces • Bar feeder interface: Included (Multiple-bar feeder specification; LNS) • Robot interface: Included • Languages/documentation • Manuals: Italian • Documentation: Installation, Operation, Maintenance manuals; Declaration of Conformity; CE Certificate • Important note • Lower turret motorized tooling function faulty on both machines. T2 turret currently usable only for turning operations. Additional equipment • Automation/handling • RR Robotica loading portal (included) • Loading pallets (included) • Work loader (Spindle 2 side) • Workpiece ejector • Work unloading conveyor • Part receiver • Custom upper door hatch for portal loading/unloading (non-original) • Chip/coolant peripherals • Drag-type chip conveyor • Coolant tank with washing pumps • Additional non-original 20 bar high-pressure pump • Workholding and tooling • Main spindle and sub spindle chucks included (KITAGAWA 8" hollow) • Fixed tool holders: 8 total (4 upper + 4 lower) Iodpfx Abjzbkh Tevjth • Driven tool holders: 2 axial, 2 radial • Electrical/other • External machine transformer • Signal light tower: 3-tier (red / milky white / green)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, * Mori Seiki ZT 1500 YB. * Opposed-spindle machine. * Spindle size A2-6, twin spindles. * 2 stacked turrets. * 9-axis controlled turning and milling center. * 2 turrets. * 2 C-axes. * Bar capacity: 65 mm. * Y-axis on upper turret. * Two integrated 15 kW motors. * Tool life management and tool wear monitoring. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Oil cooler for both spindles. * 340 Nm cutting torque. * 15-position turret, all positions motorized. * Automatic workpiece collector. * 1.5-meter bar loader. * Interface for bar loader installation. Iodjzd H I Tspfx Abveth * Rear automatic part pick-up with special gripper for long parts. * Max. turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Max. distance between main spindle and counter spindle: 920 mm. * Main spindle speed: 5000 rpm. * Counter spindle speed: 5000 rpm. * X1 travel: 210 mm. * Y1 travel: +50 / -50 mm. * X2 travel: 210 mm. * Counter-spindle travel: 920 mm. * Number of powered tool stations: 2 x 15. * Capable of holding 30 tools per turret. * Large selection of external and internal tool holders. * Large selection of axial and radial motorized blocks. * Approximate value of equipment: 18,000 euros. * Speed range of powered tools: 5,000 rpm. * Drive motor for powered tools: 5.5 kW. * Rapid traverse X1, X2: 25,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 30,000 mm/min. * C-axis resolution: 0.001°. * High-precision Hainbuch collet chucks on both spindles. * External and internal tool holders. * Motorized axial and radial blocks. * Communication ports via USB, PCMCIA card, and RS-232. * Rear chip conveyor. * Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. * Machine in very good condition. * Machine weight: 6.5 metric tons. * Machine available for inspection while in operation. * Immediate delivery, unless sold prior to listing.