Used Doosan Dnm for sale (306)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning length: 513 mm, turning diameter over cross slide: 300 mm, spindle speed (min.): 4,500 rpm, spindle bore: 76 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 580 mm, DOOSAN PUMA 240MS LATHE WITH SUBSPINDLE AND BAR FEEDER Kedpfx Aboyivaks Toln

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes. Country of Origin: Korea Kodpeyhdw Ijfx Ab Tjln Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2021, Technical details: Kjdpfx Absu U E Edj Tjln rated capacity: 220 kVA Number of working hours: 0 h type of fuel: Diesel revolutions per minute of the motor:: 1500 rpm output voltage: 400 / 50 Hz V weight of the machine ca.: 2,2 t dimensions L x W x H: 3,3 x 1,2 x 2,24 m The generator is soundproofed. - NEW -New Diesel engine: -6-cylinder -type P086TI -with battery 2x 12Volt 90 Ah Generator: -alternating current -400Volt / 50Hz -current 318 A -speed 1500 rpm -protection class IP23 -Isolation class H *

Condition: excellent (used), Year of construction: 2020, operating hours: 8,977 h, functionality: fully functional, machine/vehicle number: MM0008-000192, turning length: 1,020 mm, turning diameter: 540 mm, spindle motor power: 22 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (max.): 12,000 rpm, type of input current: three-phase, bar passage: 76 mm, total height: 2,805 mm, total length: 4,850 mm, chuck outer diameter: 210 mm, total width: 2,525 mm, bar diameter (max.): 65 mm, swing diameter over cross slide: 270 mm, spindle nose: A2#6, swing diameter over bed slide: 750 mm, overall weight: 12,000 kg, swing diameter over top slide: 540 mm, spindle diameter: 110 mm, Equipment: documentation/manual, Mastercam DOOSAN PUMA MX2100ST Machine Environment Additional Mastercam Mill 3D license available for an extra price Klodpfoxr Utmox Ab Tsn Owner sells FANUC 31i-B control 9-axis DOOSAN MX2100ST turn-mill centre was manufactured in 2020, featuring a swing over bed of 750 mm and a maximum working length of 1020 mm. It supports a bar working diameter of 65 mm and includes comprehensive Y, A, C1, C2, and B axis movements for versatile machining capabilities. Has milling spindle with Capto C6 taper, 18.5 kW and 12 000 RPM and 40 tool swing arm tool changer. A report on the maintenance and technical condition of the equipment can be received from the local dealer upon request.

Condition: excellent (used), Year of construction: 2015, DOOSAN G30 Generator Set – Machine after full service! Technical data: Power: 31 kVA (25 kW); Year of manufacture: 2015; The generator is fully operational, ready for work, with warranty. Net price: PLN 26,500 Kjdpfjylifrjx Ab Tsln Gross price: PLN 32,595 Below you will find a link to a video showing the machine in operation.

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 115500 or Make an Offer. Kjdoyfxv Tjpfx Ab Tjln Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2020, operating hours: 16,500 h, functionality: fully functional, machine/vehicle number: ML0337-000283, turning diameter over cross slide: 400 mm, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 68 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, spindle motor power: 12,600 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,693 mm, total length: 2,570 mm, total width: 1,595 mm, workpiece weight (max.): 300 kg, overall weight: 3,480 kg, Equipment: documentation/manual, rotational speed infinitely variable, Very stable roller-guided 3-axis CNC lathe with tailstock, suitable for series and single-part machining. Siemens 828 D control Coolant gun Pressure boost approx. 15 bar LNS chip conveyor, hinged belt, side design Tool holder Kodpfx Ajykzz Aob Toln

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Y travel 762 mm Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Weight 14000 Kgs Kledouu Rf Dopfx Ab Tjn Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories - Chip conveyor - Coolant unit - RENISHAW TS27 tool presetter - RENISHAW OMP60 zero point setting system - Manuals The machine is still in production but will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price..

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 2,000 h, load capacity: 7,000 kg, lifting height: 3,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, gearing type: hydrostat, fork length: 2,500 mm, fork width: 2,000 mm, fork thickness: 65 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 8.25-15, rear tire type: superelastic tires (black), rear tire size: 8.25-15, overall weight: 18,600 kg, empty load weight: 11,600 kg, total height: 2,480 mm, total length: 3,900 mm, total width: 2,700 mm, color: orange, Equipment: all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 Looking for a reliable forklift? We are industry specialists! 💼 We offer high-quality forklifts, providing proven machines in excellent condition. ✅ Check out our range and find the perfect equipment for your business! 🔹 Featured in this listing: DOOSAN 70 – 7000 KG – DUPLEX 3000 mm – Year 2013 – 2000 HOURS – DIESEL – UDT CERTIFIED – CONDITION 5/5 🛠️ The forklift is in excellent technical condition and ready for immediate operation. 📊 Key Features and Technical Specifications: Model: DOOSAN 70 Year of manufacture: 2013 Lifting capacity: 7,000 kg Operating hours: 2,000 h Mast type: Duplex Lifting height: 3,000 mm Kedpoylym Tjfx Ab Tjln Drive type: Diesel Load center: 600 mm Total weight: 11,600 kg 🔩 Tyres: Solid, superelastic, in good condition Front tyres: Superelastic – 8.25-15 / 6.50 – 🟢 100% tread Rear tyre: Superelastic – 8.25-15 / 6.50 – 🟢 100% tread 📏 Dimensions: Max height (mast lowered): 2,500 mm Overall height: 2,480 mm Overall length: 3,900 mm Overall width: 2,100 mm Fork length: 2,500 mm Fork width: 200 mm Fork thickness: 65 mm Fork positioner width: 2,700 mm ⚙️ Equipment: 💡 Lighting 🛡️ Enclosed cabin 🥾 Heavy-duty pallet forks 🔄 Hydraulic fork positioner ↔️ Side shift 📦 This forklift is an excellent choice for demanding applications where strength, stability, and precise handling are essential. 🚚 Available for immediate delivery — ask us for a transport quote! 📞 Contact us today and secure your machine!

Condition: used, Year of construction: 2014, power: 360 kW (489.46 HP), total length: 4,010 mm, total width: 1,400 mm, total height: 2,110 mm, Current frequency: 50 Hz Kjdpfx Ajyiltdob Tjln

Condition: ready for operation (used), Year of construction: 2021, operating hours: 10,000 h, functionality: fully functional, turning length: 330 mm, turning diameter: 350 mm, spindle speed (max.): 4,500 rpm, 2 production lines with two machines each, including an infeed conveyor for parts up to Ø100 mm for the first machining operation and full integration with robotic handling, an intermediate conveyor connecting machine 1 to machine 2, and an outfeed conveyor, as well as comprehensive safety systems with robot cells. Kedsylwb Uopfx Ab Tjln The machines have approximately 10,000 operating hours, manufactured in 12/2021, commissioned for production in 7/2022. We are selling due to project completion. The machines are in excellent condition and have been regularly maintained. Each line comprises: • 2 x Doosan LYNX 2100 B with CNC tailstock, Renishaw tool measurement arm, additional M codes (6x), chip breaking machining function, chip conveyor, automatic door opening, signal beacons, axis and spindle load control system, 12-position turret, oil skimmer • 2 x Fanuc M-10 iD 12 Robots, 12 kg payload The lines can be purchased as a complete set or as individual machines.

Condition: used, functionality: fully functional, machine/vehicle number: 2969, Year of construction: 2018, operating hours: 4,255 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,460 mm, fuel type: electric, mast type: triplex, construction height: 2,045 mm, power: 12 kW (16.32 HP), fork length: 1,200 mm, empty load weight: 3,190 kg, total length: 1,891 mm, drive type: Elektro, construction width: 1,090 mm, Electric 3-wheel forklift Chassis number: 2969 Kjdpjyiwlnjfx Ab Toln Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully operational Technical condition: good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Battery voltage: 48V Battery Ah: 575Ah Battery type: PzS Battery year: 2018 Side shifter, 3rd valve, 4th valve, front work lights, overhead guard, CE certificate, seat,

Condition: excellent (used), Year of construction: 2020, Swing over bed 720mm, Swing over cross-slide 590mm, Kodpfxox Uy Haj Ab Toln maximum machining diameter 481mm, maximum machining length 1275mm, bar capacity 102 mm, 12 station turret, spindle speed 2,800 rpm, Fanuc I series control, tool setter, swarf conveyor, 3 jaw chuck,

Condition: excellent (used), Year of construction: 2012, Maximum turning diameter 406mm, Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, Spindle speed, 4,500 rpm, sub-spindle speed 4,500 rpm, Kjdpox T Dhlofx Ab Toln milling speed 5,000rpm, 12 station turret, 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, 3 jaw chucks to main and sub spindles, Iemca magazine barfeed

Condition: used, functionality: fully functional, machine/vehicle number: 0257, Year of construction: 2018, operating hours: 545 h, load capacity: 9,000 kg, lifting height: 5,400 mm, free lift: 1,770 mm, fuel type: diesel, mast type: triplex, construction height: 2,980 mm, power: 80 kW (108.77 HP), fork length: 2,400 mm, empty load weight: 14,140 kg, total length: 4,040 mm, drive type: Diesel, construction width: 2,230 mm, Diesel forklift Chassis number: 0257 Load center: 600 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tyres type: Solid rubber Front tyres condition: 80 - 100% Kjdpfxoyiifqo Ab Toln Rear tyres type: Solid rubber Rear tyres condition: 80 - 100% Side shifter, fork positioner, 3rd valve, 4th valve, rear working light, front working light, heater, load protection guard, full cab, CE certificate, twin tyres, safety light, interior mirror, exterior mirror, windscreen wiper, seat, - Radio - LCD display

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 8,200 h, load capacity: 9,000 kg, lifting height: 3,100 mm, fuel type: diesel, Equipment: cabin, Diesel forklift Machine make: DOOSAN Designation: D90S-5 Manufacture year: 2012 Meter readings (mtg): 8235 Unladen weight (kg): 12197 Lifting capacity (kg): 9000 Kljdpfxevfp Rds Ab Ten Lifting height (mm): 3100 Side shift forks Mast type: STD Fuel type: diesel After a major maintenance overhaul for more than €7,000 - new tires - new forks - regeneration of cylinders, - gearbox: discs + sealants - brakes: discs and bearings - all oils, fluids and filters Technical condition: used, very good

Condition: good (used), Year of construction: 2005, operating hours: 24,000 h, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 48 m/min, controller manufacturer: Fanuc, controller model: 21i, table load: 150 kg, spindle speed (min.): 10,000 rpm, spindle nose: ISO 30, number of slots in tool magazine: 14, Equipment: chip conveyor, TEHNICAL DATA : X- axis travel: 520 mm Y- axis travel: 320 mm Z- axis travel: 350 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 48 m/min Spindle nose- table distance: 150 ~ 470 mm Pallet size: 2 - 650 x 355 mm Pallet change time: 4s Table loading capacity: 2 x 150kg Max. spindle speed: 10.000 rpm/min Tool taper : ISO 30 Spindle power : 7.5kW Max. spindle torque: 49Nm Height: 2.430mm Length: 1.700mm Width: 2.900mm Weight: 5.000kg Klsdpfxoyk Sk Us Ab Tsn Additional options : Chip conveyor 4th axis preparation Pneumatic fixture preparation Workspace flushing with coolant

Condition: used, Year of construction: 2017, functionality: fully functional, GENERAL SPECIFICATION PUMA GT 2100M 1.1. CAPACITY : - Swing over bed (interference with front cover) / : 600 mm - Swing over saddle: 390 mm - Recomended turning diameter : 210 mm - Max. turning diameter : 300 mm - Max. work length : 513 mm - Bar working diameter : 65 mm - Max. permissible mass (including chuck) : o Chuck work : 150 kg o Shaft work : 300 kg - Base structure o Bed slant angle:30 deg. o Guideway type: Box guide 1.2. MAIN SPINDLE : - Drive mechanism : Belt-drive - Chuck size : 210 mm - Motor power (15 min / cont.) : 18,5 / 15 Kw - Spindle speed : 4.500 rpm 1.3. CARRIAGE : - Travel : o X axis : 230 mm o Z axis : 580 mm o C axis : 360 grade (in 0.001) - Rapid traverse rate : o X axis : 24 m/min o Z axis : 30 m/min o C axis : 200 rot/min - Continuous thrust force : o X axis : 6207 N o Z axis : 11305 N - Intermittent thrust force : o X axis : 9931 N o Z axis : 16958 N - Ballscrew (diameter x lead) : o X axis : 32 x 10 mm o Z axis : 32 x 10 mm - Servo motor: o X axis : 1,8 kW o Z axis : 3,0 kW 1.4. ACCURACY : Klodpox Ecwaefx Ab Tjn - Positioning : o X axis : 0,01 mm o Z axis : 0,02 mm o C axis : 0,0167 degrees

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 65 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, Doosan LYNX 2100LYA – CNC Turning Center – 2020– Excellent Condition, Ready to Work! Kjdjyftfispfx Ab Tjln We offer for sale the Doosan LYNX 2100LYA CNC turning center, a high-performance machine for precise machining of rotational parts such as shafts, cones, spheres, and internal/external threads. The machine is in excellent technical condition, available immediately and ready for inspection. Key Features: High precision and reliability for both series and single-part production Large turret with 24 tools (including driven tools) Control system: Siemens Sinumerik 828D Powerful spindle and driven tools for high productivity Spindle bore 61 mm allows machining of various workpieces Technical Data: Max. turning length: 510 mm Max. turning diameter: 300 mm Clearance over bed: 600 mm Clearance over carriage: 400 mm Spindle bore: 61 mm Max. bar diameter: 51 mm Max. spindle speed: 6000 rpm Number of turret tools: 24 (driven tools included) Control system: SIEMENS Sinmerik 828D Year of manufacture: 2020 Dimensions (L x W x H): 2805 x 1582 x 1693 mm Weight: 3500 kg The machine is ready for immediate operation, connected to power, and available for inspection.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 61 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, Doosan LYNX 2100LMA – CNC Turning Center – 2019 – Excellent Condition, Ready to Work! We offer for sale the Doosan LYNX 2100LM CNC turning center, a high-performance machine for precise machining of rotational parts such as shafts, cones, spheres, and internal/external threads. The machine is in excellent technical condition, available immediately and ready for inspection. Key Features: High precision and reliability for both series and single-part production Large turret with 24 tools (including driven tools) Control system: SIEMENS Sinumerik 828D Powerful spindle and driven tools for high productivity Spindle bore 61 mm allows machining of various workpieces Technical Data: Max. turning length: 510 mm Max. turning diameter: 300 mm Clearance over bed: 600 mm Clearance over carriage: 400 mm Spindle bore: 61 mm Max. bar diameter: 51 mm Max. spindle speed: 6000 rpm Number of turret tools: 24 (driven tools included) Klsdjyftatspfx Ab Tjn Control system: SIEMENS Sinmerik 828D Year of manufacture: 2019 Dimensions (L x W x H): 2805 x 1582 x 1693 mm Weight: 3500 kg The machine is ready for immediate operation, connected to power, and available for inspection.

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 3,500 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 830 mm, total height: 2,200 mm, overall weight: 6,450 kg, controller manufacturer: FANUC, controller model: na, number of axes: 5, This 5-axis DOOSAN 2600 SY turn-mill centre was manufactured in 2015. It features a Fanuc CNC, a maximum turning diameter of 375 mm, and lengths up to 760 mm. The machine includes a motorized turret with 24 positions and motorized tools capable of 5,000 rpm. Ideal for complex machining tasks. Consider the opportunity to buy this DOOSAN 2600 SY turn-mill centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Total installed power: 54 kw • Workpiece max turning diameter: 375 mm • Workpiece max turning length: 760 mm • Workpiece max turning diameter from bar: 81 mm • Power of motorized tools: 5. 5 kw Kodjyc Iiwepfx Ab Tsln • Speed of motorized tools: 5000 rpm Extra Information Tools 1 self-centering chuck, diameter 250 mm 2 axial live tool holders 2 radial live tool holders 5 boring bar holders 5 external turning tool holders Dimensions Machine Depth 3600 mm

Condition: used, Year of construction: 2020, CNC lathe 3-axis Doosan LYNX 300M C-axis with driven tools Year of manufacture: 2020, Korea New Fanuc control (touch screen) Maximum turning diameter: 370 mm Maximum turning length: 712 mm Travel distances: Z – 790 mm X – 255 mm Chuck – 250 mm Spindle bore – 76 mm Max spindle speed – 3,500 rpm Turret for 12 tools BMT 55 Tailstock Renishaw probe Parts catcher -LNS chip conveyor -Tool holders in total: 10 pcs Kljdpfx Aoygwvnsb Ten -4 pcs -4 pcs -2 pcs 1/1 driven -Machine documentation Operating hours: 1,441

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Klodpfx Ajv Iq Ezjb Ten Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,570 h, Year of manufacture: 2015 Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Klsdpfx Absx Hgn Us Tjn Engine type: Yanmar Yanmar 4TNV94L

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 670 mm, feed length Z-axis: 625 mm, nominal power (apparent): 37 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 1,000 kg, total height: 2,815 mm, total length: 3,350 mm, total width: 3,760 mm, table width: 650 mm, table length: 1,300 mm, table load: 1,000 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 650 Vertical Machining Centre – 2011 Fanuc i-Series Control | 12,000 RPM | 4th Axis Ready 2011 Doosan DNM 650 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle, rebuilt spindle, 4th axis ready, 30-tool ATC, TSC, chiller & swarf conveyor. Available from Used Machine Tools Ireland. Manufacturer: Doosan Model: DNM 650 Machine Type: 3 Axis Vertical Machining Centre with 4th Axis preparation Year: 2011 Control: Fanuc i Series Condition: Very Good - spindle rebuilt in 2026 Availability: March 2026 We are pleased to offer this 2011 Doosan DNM 650 Vertical Machining Centre, a highly regarded and extremely rigid VMC, ideal for precision subcontract machining, toolmaking, and production environments. This machine is equipped with a Fanuc i-Series control and benefits from a newly rebuilt spindle, ensuring excellent performance, reliability, and long service life. The machine is prepared for a 4th axis with Nikken interface, making it an ideal platform for future rotary or multi-axis work. Key Specifications Manufacturer: Doosan Model: DNM 650 Year: 2011 Kedeyfh Ixepfx Ab Toln Control: Fanuc i-Series Spindle Speed: 12,000 RPM Tool Taper: BT 40 X / Y / Z Travels: 1270 / 670 / 625 mm Table Size: 1300 × 650 mm Maximum Table Load: 1000 kg Rapid Traverse Rates: X / Y: 36 m/min Z: 30 m/min ATC: 30 Places Max Tool Diameter: Ø80 mm with adjacent tools / Ø125 mm without Max Tool Length: 300mm Max Tool Weight: 8 kg Machine Dimensions (Approx): 2760 x 3350 x 2815mm Machine Weight (Approx): 8500kg Features & Equipment Newly rebuilt spindle Nikken 4th Axis preparation 30-station Automatic Tool Changer (ATC) 20 bar through-spindle coolant (TSC) Coolant chiller LNS swarf conveyor Data server / networking capability Fully enclosed, heavy-duty construction Please Note No tool holders, vices, or swarf bin included Ideal For Precision engineering CNC subcontract machining Automotive & aerospace components General and high-speed milling applications The Doosan DNM 650 is known for its exceptional rigidity, accuracy, and reliability, making it one of the most popular vertical machining centres in its class. Notes: *Specifications are given in good faith but not guaranteed*