Used Doosan Dx 300 Lc for sale (253)

Condition: used, lifting height: 4,650 mm, Year of construction: 2016, operating hours: 8,740 h, Year of manufacture: 2016 Empty weight: 8.500 kg Gbjdoy Nw Abepfx Al Ueu Digging depth: 4.175 m = Additional options and accessories = - Rubber tracks

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,900 h, Year of manufacture: 2015 Empty weight: 6.000 kg Gedpfx Aljx Hgn Uo Usbu Dimensions (LxBxH): 567 x 198 x 255 cm Engine type: Yanmar Yanmar 4TNV94L

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 1,604 h, machine/vehicle number: DHKCEAAHSM6051226, USED DOOSAN HYDRAULIC EXCAVATOR IN GOOD Gbedpfxey E Hb Ss Al Usu WORKING CONDITION MODEL : D80R SERIAL : DHKCEAAHSM6051226 YEAR : 2021 HOUR : 1604

Condition: used, Year of construction: 2017, operating hours: 8,000 h, Location: Cabanillas del Campo (Guadalajara) The used Doosan DL300-5 wheel loader is designed to allow the operator to work for hours under excellent conditions. More space, better visibility, air conditioning, a very comfortable seat, sufficient storage space, and more features. Load capacity: 3 m3 (3,000 liters). Used wheel loader for sale, equipped with a bucket at the front, ideal for building construction, mining, roads, highways, tunnels, or hydroelectric dams. This wheel loader model outperforms the competition with technologies that reduce fuel consumption and set new standards for comfort in the cab. Gbsdpfx Alezb Nahe Uou CE certified.

Condition: used, lifting height: 4,650 mm, Year of construction: 2017, operating hours: 7,150 h, Year of manufacture: 2017 Empty weight: 8.500 kg Digging depth: 4.175 m Gsdpfoxqfhljx Al Usbu = Additional options and accessories = - Rubber tracks

Condition: used, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 2,910 h, Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m Gjdpfx Aloyn En Ue Usbu = Additional options and accessories = - Rubber tracks

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: i Series, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 4-axis DOOSAN DNM 5700 was manufactured in 2022. It features an X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Rapid traverse X/Y/Z: 36 / 36 / 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Power supply: 380 V, 3-phase, 50/60 Hz • Standard-height column • Tool breakage detection • Ball screw nut cooling • Coolant level sensor Additional equipment • 4th axis Gbodpfez Rw U Aex Al Uju • Hydraulic system (3A + 1B) • Automatic doors • Robot interface • Chip conveyor • Oil skimmer • Mist collector interface Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2017, operating hours: 7,480 h, Equipment: air conditioning, Year of manufacture: 2017 Empty weight: 18.890 kg Dimensions (LxBxH): 810 x 292 x 348 cm Godpfx Aljy Nwuko Usbu Digging depth: 4.4 m = Additional options and accessories = - Central lubrication - Rubber tracks

Condition: excellent (used), Year of construction: 2010, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees, Gbjdpsz Rzzaofx Al Usu 12 station turret , 22KW Motor, Main spindle 4,000 rpm, sub-spindle 4,500 rpm, 3 jaw chuck, parts catcher, toolsetter,

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,650 h, Year of manufacture: 2019 Gbedpsxqfb Esfx Al Uou Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m = Additional options and accessories = - Rubber tracks

Condition: like new (used), Year of construction: 2022, functionality: fully functional, turning length: 725 mm, turning diameter over cross slide: 590 mm, turning diameter: 376 mm, spindle motor power: 30 W, spindle speed (max.): 2,800 rpm, spindle bore: 115 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, torque: 1,112 Nm, bar passage: 103 mm, bar diameter (max.): 103 mm, quill stroke: 100 mm, quill diameter: 100 mm, quill travel distance: 100 mm, swing diameter over cross slide: 590 mm, spindle nose: A 2-11, swing diameter over bed slide: 720 mm, feed force X-axis: 9,465 N, feed force Z-axis: 17,379 N, Equipment: documentation/manual, rotational speed infinitely variable, As-new machine, only used for commissioning and combined with a Universal BIG 70 LoadAssistant holder. Can also be purchased separately. Gedpfjyud Uajx Al Uebu

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: ML0271-000198, spindle speed (max.): 6,000 rpm, spindle motor power: 15 W, total height: 1,600 mm, total length: 2,325 mm, total width: 1,600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, type of input current: three-phase, bar passage: 65 mm, Equipment: documentation/manual, We are offering for sale a DOOSAN LYNX 220LSYC CNC lathe with a tailstock, in good condition, manufactured in 2015. It operated for 2 years in medium-volume series production, and since then, it has been used to produce smaller series and custom parts. The machine is equipped with a chip conveyor, tool measuring device, a chuck with collet mounting, and a 3-jaw hydraulic chuck. It has powered tool holders (3 pieces). It includes an LNS bar feeder, capable of handling bars up to 3 meters in length (included in the price). Gjdpfoy Uwgqsx Al Usbu Other features include: workpiece ejector, workpiece catching and delivery system, tool load monitoring, and an oil separator, which extends the coolant's lifespan. It also has a highly rigid cast iron machine bed and a turret with 12 tool positions (24 positions). The dimensions refer only to the lathe itself. Weight: 2900 kg (the weight of the bar feeder is separate). Net price. If you have any questions or require further information, please send us a message.

Condition: excellent (used), Year of construction: 2017, operating hours: 2,742 h, functionality: fully functional, machine/vehicle number: MV0061-000661, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, controller manufacturer: Fanuc, workpiece length (max.): 800 mm, workpiece width (max.): 550 mm, workpiece height (max.): 460 mm, total height: 2,580 mm, total length: 3,260 mm, total width: 3,130 mm, table width: 570 mm, table height: 880 mm, table length: 860 mm, overall weight: 9,200 kg, distance table center to spindle nose: 720 mm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Doosan VC 510 (2017) – Vertical Machining Center with APC High-productivity 40-taper vertical machining center featuring a heavy-duty column-moving design and an integrated 2-pallet automatic pallet changer (APC). Key Specifications: Year: 2017 Control: Fanuc Travels (X / Y / Z): 762 × 516 × 570 mm Gjdpjz Atqrjfx Al Usbu Pallet Size (×2): 860 × 570 mm (Rotary APC, ~6 sec swap) Max Workpiece Size: 800 × 550 × 460 mm Max Table Load: 350 kg per pallet Spindle Motor (kW): 15(30min)/11(CONT.) Max. Torque (Nm): 191.1(30min) Tool Changer (ATC): 30 Tools Rapid Traverse (X/Y/Z): 40 / 40 / 32 m/min Guideways: Heavy-duty Roller LM Guides Machine Weight: ~9,200 kg Excellent condition, fully maintained, and built for continuous high-speed production. Contact for inspection and further details.

Condition: used, Year of construction: 2020, operating hours: 426 h, functionality: unexamined, machine/vehicle number: 1, spindle bore: 65 mm, spindle motor power: 18 W, rotational speed (max.): 4,500 rpm, total height: 1,700 mm, total length: 2,800 mm, total width: 20,001,700 mm, type of input current: DC, overall weight: 3,700 kg, swing diameter over bed slide: 600 mm, distance table center to spindle nose: 590 mm, spindle nose: 65, For the 2020 GT2100 Plus series, the screen-on time is 1260 operating hours, with 427 hours of active use. Gbsdpfxez Hc Tzo Al Uou

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 30,000 m/min, controller manufacturer: HEIDENHAIN iTNC-530, controller model: iTNC-530, spindle speed (max.): 10,000 rpm, spindle motor power: 22 W, BRAND: DOOSAN MODEL: VM-640 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 11/2010 CNC CONTROL: HEIDENHAIN ITNC-530 MACHINE WEIGHT: 9,000 kg Gbsdpfx Alsxxlfye Usu MACHINE DIMENSIONS: Length: 4,200 mm; Depth: 2,800 mm; Height: 2,900 mm Spindle Taper size: ISO-40 Spindle speed: 12,000 rpm Spindle motor power (cont./30 min.): 18.5/22 kW Working Capacity X axis: 1,300 mm Y axis: 650 mm Z axis: 625 mm Distance spindle nose – table surface: 150 ÷ 775 mm Table Table dimensions: 1,400 x 650 mm Maximum table load: 1,000 kg Feed Rates Rapid traverse (X / Y axes): 36,000 mm/min Rapid traverse (Z axis): 30,000 mm/min Working feedrates (X / Y / Z axes): 1 ÷ 15,000 mm/min Tool Changer Tool taper: DIN 69871 – A40 Shank: DIN 69872 – A40 Tool magazine capacity: 30 stations Max. tool diameter (adjacent stations full/empty): Ø 90 / Ø 150 mm Max. tool width: 300 mm Max. tool weight: 8 kg Other Equipment Chip conveyor Coolant tank with wash pumps High-pressure coolant pump through spindle Spindle line air conditioning unit Transformer Manuals, Electrical Schematics, and CE Declaration The following maintenance has been performed on the machine: - X axis ballscrew overhauled and bearings replaced - Geometry recovered with hand-scraping of Turcite on X/Y axes - Complete internal repaint and Lexan replacement - Complete overhaul of X/Y/Z axis telescopic covers - Lubrication system overhauled

Condition: used, Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 2, turning diameter over cross slide: 600 mm, turning length: 600 mm, turning diameter: 390 mm, spindle bore: 65 mm, travel distance X-axis: 230 mm, travel distance Z-axis: 600 mm, spindle motor power: 18 W, total length: 3,200 mm, total width: 2,000 mm, type of input current: DC, overall weight: 4,200 kg, spindle nose: 65, Equipment: documentation/manual, 2022 model, in excellent condition, with low mileage. Gjdpfxjz Hdbme Al Uebu

Condition: good (used), Year of construction: 2012, functionality: fully functional, Machine parameters: Godpfjz Iw Ddex Al Uobu Travel in X, Y, and Z axes: 1270 x 670 x 625 mm Table clamping area: 1300 x 670 mm Description: The machine is in good technical condition, and testing is possible by prior arrangement. It features a FANUC control system. The machine has a cast iron construction, linear guides, travel in the X/Y/Z axes of 1270/670/625 mm, table dimensions with clamping "T" slots of 1300 x 670 mm, table load capacity of 1000 kg, and a tool changer with 30 positions. Extensive accessories include: a 4th axis (rotary table), a hydraulic vice, a RENISHAW tool and workpiece probe, an oil skimmer, a three-color light signaling system, a chip conveyor, a Filtermist 6002 emulsion mist extractor, tool holders, etc.

Condition: ready for operation (used), functionality: fully functional, Pin diameters: 8 cm – 9 cm Center distance: 38.5 cm and 40 cm All measurements are shown in the photos Gjdpfx Ajyzabwol Usbu Blade length: 145 cm All dimensions can be setted according to your machine by bohrwerk machining Very competitively priced

Condition: good (used), Year of construction: 2003, functionality: fully functional, turning length: 450 mm, turning diameter: 310 mm, CNC control Fanuc O-TC 12-fold revolver (VDI30) 3-jaw chuck main spindle 3-jaw chuck sub spindle chip conveyor tool measuring device coolant device Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 500 mm Umlaufdurchmesser über Planschlitten / rotary diameter over sledge 310 mm max. Drehdurchmesser / max. turning diameter 310 mm max. Drehlänge / max. turning lenght 450 mm X-Weg / X-travel 200 mm Z-Weg / Z-travel 450 mm Drehzahl / spindle speed 4500 UpM /rpm Gbjdpjzvlnvofx Al Usu Werkzeugrevolver / turret head 12 fach /holes Stangendurchlass Hauptspindel / bar diameter main spindle 50 mm Eilgang X / rapid feed X 24 m/min Eilgang Z / rapid feed Z 30 m/min. Antriebsleistung Hauptspindel / drive capacity main spindle 11/9 kW Gewicht der Maschine ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,900 W, overall weight: 6,550 kg, controller manufacturer: SIEMENS, controller model: 828D, number of slots in tool magazine: 12, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2020. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a powerful spindle speed range of 20–4,000 rpm and a robust turret with 12 tool stations. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Controlled axes: X, Z, Y, B, C1, C2 • Slant bed: 30°Travels and rapid traverse • B-axis (sub-spindle) travel: 830 mm • C1-axis: ±360° • C2-axis: ±360° • Rapid traverse (X / Z / Y / B): 30 / 30 / 10 / 30 m/minMain spindle • Spindle nose: ASA A2-8 • Hydraulic chuck: 254 mm, 3-jaw • Max. torque: 730 Nm • Spindle bore: 91 mm • Drawtube ID: 82 mm • Integrated built-in spindle motor • C1 positioning resolution: 0.001°Sub-spindle • Spindle nose: ASA A2-5 • Hydraulic chuck: 170 mm, 3-jaw • Speed range: 60–6,000 rpm • Motor power: 18.2 kW • Max. torque: 220 Nm • Spindle bore: 62 mm • Drawtube ID: 50 mm • Built-in motor Godoz N Dhtepfx Al Uobu • C2 positioning resolution: 0.001° • Part ejector stroke: 120 mmMachining capacity • Max. swing over bed: 780 mm • Max. swing at front door: 680 mm • Max. swing over carriage: 630 mm • Max. turning diameter: 376 mm • Max. turning length between centers: 760 mm • Max. bar capacity, main spindle: 81 mm • Max. bar capacity, sub-spindle: 49 mm • Off-center milling capacity (Y-axis): 105 mm (±52.5 mm) • Max. cantilever workpiece weight: 260 kg • Max. workpiece weight using sub-spindle: 520 kgTurret and driven tools • Turret type: BMT-65 • Turret indexing positions: 24 • Tool stations: 12 (all 12 driven) • Indexing time: 0.15 / 0.65 sec • Turning tool size: 25 × 25 mm • Boring tool capacity: Ø50 mm / Ø32 mm • Driven-tool speed: 50–5,000 rpm • Driven-tool power: 4.1 / 7.79 kW • Max. driven-tool torque: 79.8 Nm • ER-32 capacity: Ø3–20 mm • Rigid tapping: Yes Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2013, functionality: fully functional, Technical data, prices, and images can be found in the PDF files attached. Godpfx Alozuddys Uebu

Condition: like new (used), Year of construction: 2019, operating hours: 2,352 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 31i-B, workpiece weight (max.): 700 kg, table width: 500 mm, table length: 1,000 mm, table load: 700 kg, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 2,352 h, coolant supply: 30 bar, spindle motor power: 22,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, DOOSAN NX 5500 II VERTICAL MACHINING CENTER YEAR OF MANUFACTURE: 2019 CNC FANUC 31i-B SPINDLE: 20,000 RPM, 22KW, HSK-A63 TRAVEL: X 900, Y 550, Z 500 MM Gbsdpfsy Tvbkex Al Uou RANDOM TOOL CHANGER: 30 TOOLS, TOOL-TO-TOOL CHANGE TIME: 1.6 S DUAL CHIP CONVEYOR ELECTRONIC HANDWHEEL INTERNAL COOLANT SYSTEM: 30 BARS LASER PROBE FOR TOOL MEASUREMENT: RENISHAW NC4 PROBE FOR WORKPIECE MEASUREMENT: RENISHAW OMP60 WEIGHT: 9000 KG

Condition: good (used), Year of construction: 2010, operating hours: 115,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Gbsdpfxjyx U Nws Al Uou

Condition: used, Year of construction: 2006, CNC lathe, 2-axis Doosan S280N, year 2006 Fanuc Oi Mate TB control Chuck diameter: 210mm (8 inches) Spindle bore: 51mm Turning length: 320mm Max. turning diameter: 280mm 10-tool turret Tailstock Gbsdjz Rpg Dspfx Al Uou Parts catcher Chip conveyor with tank and pump Machine documentation

Condition: like new (used), Year of construction: 2015, operating hours: 2,500 h, functionality: fully functional, AVAILABLE FOR INSPECTION DURING PRODUCTION DOOSAN HORIZONTAL MACHINING CENTER Model: HM1250 Year: 2015 Control Unit: FANUC 31I-B X-axis travel: 2100 mm Y-axis travel: 1500 mm Z-axis travel: 1500 mm Gjdpfx Aljz Ihnaj Ujbu Table length: 1250 mm Table width: 1250 mm Max. workpiece dimensions: DIAMETER 2300, HEIGHT 1725 Max. workpiece weight on table: 40000 kg Spindle speed: 6000 rpm Spindle connection: ISO 50 Torque (continuous / 10 min): 1989 Nm Number of tools: 90 positions High pressure: 70 bar