Used Double Belt Grinding Machine for sale (75,076)

Condition: new, Year of construction: 2022, width of the strips 75 mm band length 2000 mm band speed 36 m/min total power requirement 4 kW weight of the machine ca. 82 kg dimensions of the machine ca. 1000 x 500 x 1150 mm Belt sander Metallkraft MBSM 75-240-1, article no.: 3923272 For sanding surfaces, edges and rounding off Description: - Powerful motors and vibration-free operation for the best sanding results - Quick sanding belt change in seconds thanks to quick-release system - Large surface sanding area thanks to fold-away upper sanding belt cover - Continuous sanding surface after removal of attachments enables sanding of long workpieces too - Can be used with and without extraction - One extraction nozzle on the spark box and one on the rear belt roller - Simple adjustment of the belt run via adjusting screw Ncsdpfx Aex H Aliefzel - Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system - Infinitely tiltable sanding unit - Fold-away protective screen

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sec grinding width 75 x 430 mm engine output 3.0 kW weight 75.0 kg Ncedpfexabaisx Afzel including machine base Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable - Patented strap tensioning system - Robust three-phase motor - Low vibration

Condition: new, width of the strips 150 mm band length 2280 mm revolutions per minute 2880 U/min roll diameter 140 / 80 mm Ncodpfx Aexab R Iofzjl table-size 700 x 350 mm engine output 3.0 kW weight 250 kg range L-W-H 1300 x 800 x 1500 mm MADE IN GERMANY - Machinevideo - ?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder Ncsdpfx Afsb A Hw Nozol -Engine power: 1.1 kW -Grinding discs: 300 x 40 -Operating voltage: 380 volts

Condition: new, Year of construction: 2025, CORMAK SM150D Belt Grinder The CORMAK SM150D belt grinder is an industrial machine designed for intensive operation in production plants, locksmith workshops, and tool rooms. It is a metal belt grinder that combines high grinding efficiency with an effective dust extraction system, ensuring safety, cleanliness, and comfort in everyday use. Its solid steel construction and large worktable surface guarantee stability and precision, even when processing large components. Main Advantages Two belt speeds (14.5 / 29 m/s) – allows adjustment of speed to the type of material and nature of work (coarse or finishing grinding). Integrated dust extraction system – ensures a clean and safe working environment without the need for external dust collection units. Stable steel construction – effectively reduces vibrations, improving repeatability and machining quality. Large worktable (480 × 150 mm) – allows comfortable handling of larger workpieces. Stepless grinding angle adjustment – enables precise positioning of the belt relative to the workpiece. Quick belt change system – minimizes downtime and improves work efficiency. Design and Technology Nodpfx Aexrzgtsfzocl The stationary CORMAK SM150D grinder is built on a welded steel frame, ensuring rigidity and resistance to dynamic loads. The integrated extraction system provides highly efficient removal of dust and grinding debris. A 2.8 kW motor delivers sufficient power for demanding machining tasks. Precision and Efficiency Thanks to the use of a 150 mm wide and 2000 mm long belt, the machine provides a large contact surface, reducing processing time and increasing efficiency. The two belt speeds allow for a quick switch from aggressive material removal to fine surface finishing. The ergonomic design and spring-loaded belt tensioning system ensure proper belt tension throughout the work cycle. Applications The CORMAK SM150D metal belt grinder is suitable for use in: production plants working with steel, stainless steel, and aluminum, welding and locksmith workshops, surface preparation and finishing departments, grinding edges, welds, and flat surfaces. Standard Equipment Stable steel base with tilt adjustment Grinding belt 2000 × 150 mm Built-in dust extraction system with bag and Ø100 mm ports Spark and dust protection cover Adjustable protective shield Technical Specifications Parameter Specification Abrasive belt dimensions (L × W) 2000 × 150 mm Belt speed 14.5 / 29 m/s Motor speed 1400 / 2800 rpm Motor power 2.8 kW Machine dimensions (L × W × H) 700 × 540 × 1130 mm Weight 90 kg Power supply 400 V Extraction port diameter 2 × Ø100 mm Worktable dimensions 480 × 150 mm Chip bag diameter Ø100 mm Chip bag length 500 mm

Condition: new, Year of construction: 2025, A universal mobile belt grinder designed for grinding/polishing elements that may be impossible to transport due to their size or weight. Nodpfx Aovu Unmofzscl Machine description Excellent device stability. Adjustable depth stop Easy and convenient operation Designed for grinding/polishing elements that are difficult to transport due to their dimensions Highly effective in grinding or polishing welds near the floor Technical parameters Motor (kW) 2.8 Contact wheel (mm) 195x150 Steering roller (mm) 195x150 Flat grinding (mm) 150x450 Tape size (mm) 2000x150 Belt speed (mm) 15/30 m/s m/s Working height (mm) 475-1240 Weight (kg) 85 Packaging (cm) 750x1100x800

Condition: new, Year of construction: 2025, A universal belt grinding machine for rough grinding and metal buffing. Suitable for various shapes and materials. The machine is by default equipped with a suction connector for extraction. 75×2000 mm grinding belt, powerful 3 kW motor. SM 75 model is additionally equipped with 2 belt speeds: 14,5 and 29 m/s. 2 rubberised wheels ensure good grip of the grinding belt. Machine features Universal area of application for edges, surfaces and round grinding Graphite coating on the surface for grinding surfaces increases the grinding belt's slippage Spring device ensures constant belt tension Easy and quick belt replacement Ncedpfxevu Uh To Afzjl Optimum grinding efficiency due to the high speed of the belt Can be quickly adjusted to horizontal or inclined grinding Universal area of application in iron working shops and industrial areas Large grinding surface with a protection guard Equipped with an additional precise adjustment of the belt inclination angle By default equipped with 2 belt speeds Technical data Wheel contact surface (H×W) 250×150 mm Grinding belt dimensions (L×W) 2000×75 mm Belt speed 14,5/29m/s Motor power 3 kW Weight 72 kg Dimensions (L×W×H) 1070 x 560 x 980 mm Warranty 12 months

Condition: new, Year of construction: 2025, Universal grinding machine for metal. Contains two belt speeds, 9.5/19 m/s. Features sturdy, reliable design and convenient handling. 100×1220 mm grinding belt. Machine features Ncjdpfevvk Hhsx Afzel Universal belt grinding machine for rough grinding, edge grinding, etc. Suitable for various materials. By default equipped with an intake connector for extraction. Simple and convenient handling, at the same time quiet and sturdy during operation. Well-balanced rollers ensure vibration-free work Significant time saving while deburring Enclosed on/off switch, compliant with the IP54 rating with an undervoltage trip release Powerful, failure-free motor Quick and simple belt replacement Large grinding surface, adjustable limiters – universal purposes Solid, vibration-free design Technical data Voltage 400V, 50 Hz Grinding belt dimensions (D×S) 1220×100 mm Belt speeds 9.5/19 [m/sec] Motor power 1.5 kW Weight 44 kg Dimensions 630×410×355 mm

Condition: new, Year of construction: 2025, NEW ON THE MARKET! Universal belt grinding machine with extensive standard equipment and the ability to work vertically and horizontally. quick & easy replacement of the sanding belt quick & easy adjustment of the grinding angle quick change of the head position in the vertical-horizontal area Smooth speed regulation with RPM indicator 550W brushless motor Shock absorber to dampen vibrations during operation, regulates the tension and adherence of the belt to the material Aluminum drive wheel Aluminum guide rollers with bearings Belt covers in accordance with CE standards Steel supports allowing for precise pressing of the workpiece to the tape Technical data Power 230V Engine 0.55 kW Ncjdpovu Ukhefx Afzsl Tape speed 12-34 m / s Tape dimension 50x1000 mm Weight 20 kg Dimensions 440x340x420 mm

Condition: new, Year of construction: 2025, A universal belt grinding machine for rough grinding and metal buffing. Suitable for various shapes and materials. The machine is by default equipped with a suction connector for extraction. 75×2000 mm grinding belt, powerful 3 kW motor. SM 75 model is additionally equipped with 2 belt speeds: 14,5 and 29 m/s. 2 rubberised wheels ensure good grip of the grinding belt. Machine features Universal area of application for edges, surfaces and round grinding Graphite coating on the surface for grinding surfaces increases the grinding belt's slippage Spring device ensures constant belt tension Easy and quick belt replacement Optimum grinding efficiency due to the high speed of the belt Can be quickly adjusted to horizontal or inclined grinding Universal area of application in iron working shops and industrial areas Large grinding surface with a protection guard Equipped with an additional precise adjustment of the belt inclination angle By default equipped with 2 belt speeds Technical data Wheel contact surface (H×W) 250×150 mm Grinding belt dimensions (L×W) 2000×75 mm Ncjdevu Uhajpfx Afzol Belt speed 14,5/29m/s Motor power 3 kW Weight 72 kg Dimensions (L×W×H) 1070 x 560 x 980 mm Warranty 12 months

Condition: new, Year of construction: 2025, Universal belt grinding machine with rich standard equipment and the ability to work vertically and horizontally. Machine description easy and quick change of grinding tools Ncedpfxevu Ukzs Afzjl easy and quick setting of the grinding angle easy and quick change of grinding belt quick change head position in the vertical-horizontal range Technical parameters Belt speed 14,5 / 29 m/s Belt dimensions 75 x 2000 mm Voltage 400 V Motor power 1.5 kW / 2.2 kW Weight 110 kg Maximum tube diameter 60.3 Equipment rubberized wheel Ø200 mm tool with sliding support and rollers 120 x 90 mm pipe grinding vice with adjustable angle 0-30° rollers set: 20; 21,3; 26,9; 33,7; 42,4; 48,3; 60,3 mm grinding belt 75x2000 mm

Condition: used, Year of construction: 2025, A universal mobile belt grinder designed for grinding/polishing elements that may be impossible to transport due to their size or weight. Machine description Nedpfx Aexpvknsfzscl Excellent device stability. Adjustable depth stop Easy and convenient operation Designed for grinding/polishing elements that are difficult to transport due to their dimensions Highly effective in grinding or polishing welds near the floor Technical parameters Motor (kW) 2.8 Contact wheel (mm) 195x150 Steering roller (mm) 195x150 Flat grinding (mm) 150x450 Tape size (mm) 2000x150 Belt speed (mm) 15/30 m/s Working height (mm) 475-1240 Weight (kg) 85 Packaging (cm) 750x1100x800 WARNING!!! THE MACHINE IS RETURNED, COMPLETE. NO ORIGINAL PACKAGING. NO WARRANTY.

Condition: new, Year of construction: 2025, Professional belt grinder CORMAK BS 150-200 for rough grinding and polishing of metal. Suitable for various shapes and materials. The size of the sanding belt is 150x2000 mm and the powerful 3 kW motor make it universal in its applications. Characteristics of the BS150-200 belt sander CORMAK BS150-200 belt sander with extraction - excellent combination of performance and stability. Equipped with a solid and rigid steel base , it ensures reliable stability during operation. With one working speed, precision sanding becomes easier than ever before. Adjustable, stepless grinding angle with lock allows precise setting and maintaining the optimal position. The large grinding surface facilitates manipulation and grinding of various workpieces. Additionally, the belt sander is standardly equipped with an effective extraction system , eliminating dust and ensuring a clean and safe working environment. Good stability thanks to the strong and rigid steel base Two working speeds Adjustable grinding angle with lock The large grinding surface makes it easier to grind workpieces Ncodpovu Uqnefx Afzjl Equipped with extraction as standard Product parameters: Dimensions of the abrasive belt (L x W) [mm] 2000x150 Belt speed [m/s] 15/30 Engine speed [rpm] 1400/2800 Engine power [kW] 2.5/3.0 Weight [kg] 117 Dimensions (L x W x H) [mm] 1000x650x1150 Power supply [V] 400 Extraction motor power [kW] 0.37

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, overall weight: 100 kg, space requirement height: 1,025 mm, space requirement length: 955 mm, space requirement width: 530 mm, extraction nozzle diameter: 100 mm, grinding width: 150 mm, grinding belt speed: 30,000 mm/s, grinding belt length: 2,000 mm, power: 3.3 kW (4.49 HP), grinding belt width: 150 mm, Good day, We are pleased to offer you, subject to prior sale, a used belt grinding machine, model MBSM 150-203-2, manufactured by Stürmer Maschinen GmbH. Manufacturer: Stürmer Maschinen GmbH, Germany Model: MBSM 150-203-2 Year of manufacture: 05/2024 Abrasive belt length: 2000 mm Abrasive belt width: 150 mm Belt speed: 30 / 15 m/s Graphite platen length: 495 mm Ncedsx N Ugqjpfx Afzol Graphite platen width: 150 mm Motor power: 2.5 / 3.3 kW Extraction nozzle diameter: 2 x 100 mm Power supply: 400 V / 50 Hz Sound pressure level: 87 dB (A) Required floor space: 955 x 530 x 1025 mm (L x W x H) Weight: approx. 100 kg Key features as per the manufacturer: - The machine can be operated at two belt speeds: 30 m/s and 15 m/s. - A continuous surface grinding area, enabled by removable attachments, allows for the processing of long workpieces. - An integrated quick-release system ensures rapid belt changes. - Simple belt tracking adjustment via a setscrew on the front contact roller. - Automatic belt tensioning through a spring-loaded tensioning system. - Infinitely adjustable tilt of the grinding unit. - Separate extraction nozzles on both the spark box and the rear belt roller. Note: The above technical specifications are taken from the operating manual, manufacturer’s brochures, or other sources. We assume no liability for the accuracy or completeness of the information provided. Scope of delivery: 1 used belt grinding machine, type MBSM 150-203-2 by Stürmer Maschinen GmbH Application and condition: The machine was only occasionally used in a maintenance workshop for grinding surfaces, edges, and rounding off during repair work or the fabrication of spare parts for our own machinery. It is in almost as-new condition. The machine is fully functional, in excellent condition, and can be inspected under power at our workshop. We would be pleased if this machine is of interest to you. Your service team, Mertens & Frowein GmbH

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 650x1160x650 mm Njdovz Hv Aopfx Afzscl Weight 125 kg Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 750x1160x550 mm Weight 85 kg Ncodpfx Ajvz Hv Njfzol Total power requirement 2,2 kw

Condition: new, functionality: fully functional, total width: 510 mm, total length: 940 mm, total height: 1,000 mm, type of input current: three-phase, overall weight: 120 kg, input voltage: 400 V, grinding width: 150 mm, grinding belt speed: 33,000 mm/s, warranty duration: 12 months, power: 4 kW (5.44 HP), WBG150 - ROGI belt grinding machine 400V - 3 Phase Abrasive belt ----- 150 x 2000 mm Belt speed ----- 33 m/s Nodpfoga T Ihjx Afzecl Motor ----- 4 kW Weight ----- 120 kg INCLUDES * Robust base cabinet * Abrasive belt

Condition: excellent (used), Year of construction: 2011, Profile Belt Sander, PS0 Rasprofil by Zimmermann with Extensive Accessories Ncodpjw Iqvqsfx Afzjl Belt sander with tilting table and additional fittings for rasping. Ideally suited for model making and mold construction. Designed for precision contour sanding. All settings made via clamping lever and fine adjustment. Drive motor: 400 Volt, 1.1 kW Table tiltable up to 45 degrees forwards and up to 20 degrees backwards Machine table approx. 400 x 400 mm Upper extraction arm foldable for sanding large parts. By locking the freestanding profile rail in the upper machine section, high angular accuracy can be achieved. Includes three reversible profile rails (15, 30, and 40 mm, straight and radius profiles). Several sanding belts included, see photos Three unused rasps Extraction connection 80 mm Waldmann mounted work light Original paint, touched up in places CE marking Very well-maintained machine from prototype manufacturing in the motorsport department of a Wolfsburg automotive manufacturer. Apparent minimal previous usage. Dimensions approx. 600 x 850 x 1350 mm (LxWxH). Weight approx. 220 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this seller.'

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 581 mm, total length: 956 mm, total height: 1,205 mm, overall weight: 110 kg, input voltage: 380 V, grinding width: 75 mm, grinding belt speed: 30,000 mm/s, warranty duration: 12 months, grinding belt length: 2,000 mm, grinding belt width: 75 mm, Universal belt grinder UTBS-75 Njdpfex N Sv Asx Afzocl

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition Ncedpfexuv Udjx Afzsl used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Double bench grinder METABO type 7206 D Year of manufacture: approx. 1985 Max. grinding wheel diameter: 150 mm Grinding wheel width: 20 mm Grinding wheel bore: Ø 32 mm Speed: 3000 rpm Motor power: 280 watts Power supply: 380 volts, 50 Hz – Fitted with one 36 and one 80 grit corundum grinding wheel Required space (L x W x H): 460 x 240 x 220 mm Weight: 18 kg Good condition Ncodpfxjxf Uv Us Afzel

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm Ncodpfxoxq R Hae Afzsl weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of Nodexq Hkuopfx Afzjcl delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Double Bench Grinder AEG Type DWS 200/800M No: 87 644919 Year of manufacture: approx. 1970 Ncsdpfx Aexrgvaefzol Grinding wheel diameter: 200 mm Grinding wheel width: 32 mm Motor power: 0.8 kW Grinding wheel speed: 3000 rpm Power supply: 380 V, 50 Hz - Motor bearings need to be replaced - 1 grinding wheel with 25 mm width - 1 grinding wheel with 32 mm width Required space (L x W x H): 600 x 280 x 300 mm Weight: 40 kg

Condition: used, Double grinding machine METABO Type 730 Serial No. 208158 Grinding wheel diameter: 200 mm Nedpjxrguiofx Afzscl Grinding wheel width: 33 mm Motor power: 0.75 kW Grinding wheel speed: 2800 rpm Power supply: 380 Volt, 50 Hz - Original stand Required space (L x W x H): 630 x 340 x 1150 mm Weight: approx. 80 kg