Used Dried Fruit for sale (3,737)

Condition: good (used), TASKI Swingobot 2000 autonomous scrubber dryer Manufacturer: TASKI / Diversey Model: Swingobot 2000 Type: COR2000 Machine type: Autonomous scrubber dryer Condition: used, fully operational Operating hours: approx. 38 hours Serial number: 7524396000434 Operating voltage: 24 V DC Power consumption: 1500 W Weight: 471 kg Working width: 700 mm Suction nozzle width: 900 mm Fresh water tank: 90 l Operating time: up to 4 hours Theoretical area performance: up to 1,260 m²/h Protection class: IPX3 Operation: autonomous or manual Hnodpozd Eyusfx Abvjn Navigation system: LIDAR and sensor system Touchscreen control panel Emergency stop switch Location: Teningen-Nimburg

Condition: used, Year of construction: 1999, Machine number: 9114108 Weight (approx.): 150 kg Motor power: 0.71 / 1.26 kW Overhang – stand to drilling center: 600 mm Max. material height: 200 mm Table width: 1000 mm Number of drilling spindles: 4 Drill chuck: Screw-in thread Drilling depth limitation: Yes Hnedpfx Abszd Hntovsn Drilling stroke: 70 mm Speeds: 1400 / 2800 rpm Workpiece clamp: Yes Drilling feed: Hand lever Working height or feed table height: 890 mm, with lighting Storage location: Nattheim

Condition: excellent (used), Catalogue number: 7859 ADVANTAGES – 8 spindles – with oscillation – variable spindle spacing (adjustable) – 2 work tables – unpainted – used drilling machine, in very good condition TECHNICAL DATA Drilling spindles: 2x4 pcs Oscillation range left/right: 40mm per side Oscillation speed adjustment on inverter Spindle head adjustment: up/down Each pair of spindles (2 pcs) adjustable: left/right 2 rotation speed options + left/right Max tool diameter: 15mm Table adjustment: up/down Table dimensions: 700x200mm 4 hydraulic cylinders Motor power: 2x 2kW Oscillation motor: 0.75kW Dimensions (L/W/H): 1800x1350x1300mm Weight: 862kg Hjdpjzdz Hqjfx Abvonn Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, kW: 30 Rotor diameter: 500 mm Rotor width: 1200 mm Hsdpfxozdd Hbj Abvsnn

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Hnedpfxjzdd Dao Abvsn Drive power 30 kw A total of four dryers of this model are available.

Condition: used, kW: 30 Hnodpfxezddqaj Abvsn Rotor diameter: 500 mm Rotor width: 1200 mm

Condition: used, Spindle Speed 80-3200 U/min. 30 mm 25 mm Hedpozdu Uuefx Abvjnn table surface area 500x365 mm bore depth 125 mm throat 260 mm MK 3 distance spindle /table 90-840 mm T-slot - width 14 mm column diameter 110 mm weight of the machine ca. 270 kg

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Number of horizontal spindles: 3 Hodpexc Hi Usfx Abvonn Cup hinge boring head: yes, Blum Drill pitch: 32mm Power consumption: 2.2kW Drilling unit: swiveling

Condition: used, functionality: unexamined, Ferwood Code: RU0007370 - Manufacturer Code: S18-00-07 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - Weight: 9KG - Dimensions: 46X39X27 - If interested, we offer a refurbishment service; please contact us. Hnsdpfxszd E Ifj Abven

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 32 mm throat 285 mm bore stroke 160 mm turning speeds 55 - 1450 U/min taper MK 3 table-size 500 x 370 mm feed 0,1-0,2-0,3 m/min total power requirement 1,6 kW weight 400 kg dimensions 1000 x 700 x 1850 mm Features: - Automatic feed Hnsdpfx Aozcqzcsbvon - Coolant system - Continuously variable speed control - Adjustable depth stop - Drill chuck

Condition: used, functionality: unexamined, Ferwood Code: RU0007370 - Manufacturer Code: S18-00-07 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - Weight: 9KG - Dimensions: 46X39X27 - If interested, we offer a refurbishment service; please contact us. Hnodpfx Aszd E Dtjbven

Condition: used, functionality: unexamined, Ferwood Code: RU0007476 - Manufacturer Code: R911279433 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG-IMA - Weight: 8KG - Dimensions: 70X46X34 - If interested, we offer a refurbishment service; please contact us. Hsdpfxszd E Dge Abvenn

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003619 - Manufacturer Code: HDS04,2-W200N-HS12-01-FW - Condition: Like new (display item) - Functionality: Fully functional - Compatible Machine: CNC HOMAG-IMA - Weight: 22KG - Dimensions: 70X46X34 - If interested, we offer an overhaul service, please contact us. Hjdpfxjzd Ezro Abvenn

Condition: used, Industrial electric screwdrivers from the Apex Tool Group system, designed for automated screwing applications and assembly lines. Two identical units are available. Manufacturer: Apex Tool Group Brand: APEX / Cleco Type: TSE Design: Electric screw spindle drive Article number: 961446PT Condition: used Year of manufacture: 2018 Supply voltage: 380 VDC Hedpfxszdagde Abvenn Frequency: 0 Hz Input current: 2/10 ADC Screw spindle: Manufacturer: Cleco Torque range: 7 - 12 Nm Maximum speed: 2921 min⁻¹ Weight: 1.0 kg Encoder: Manufacturer: Cleco Type: IK3B Gear ratio: 1:1 Compatibility: IK3M Quantity available: 2

Condition: used, CLECO Screwdriver Cable Highflex 961104-060, 6 m Original CLECO screwdriver cable for industrial electric screwdrivers and assembly systems. Robust design with industrial circular connectors at both ends. Manufacturer: CLECO Type: 961104-060 Designation: Cable Highflex Condition: used Cable length: 6 m Hnedpfozdafysx Abven Design: Connecting cable for screwdriver systems Cable type: Highflex Connectors: Industrial circular connectors on both sides Cable color: Orange Quantity available: 4

Condition: good (used), Year of construction: 1990, power: 3 kW (4.08 HP), rotational speed (max.): 1,280 rpm, total width: 2,000 mm, total length: 2,000 mm, total height: 2,300 mm, table width: 400 mm, table length: 1,200 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Max. tap Ø: 40M Stroke pinole: 280mm Hnedpfx Abszcnnajvon Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Power: 3kW Length: 2000mm Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Column drill press, model Flott 16 Drilling capacity: up to 16 mm (in steel) Drill chuck: 1-13 mm Mount: MK2 Right-hand rotation: 2 speeds Left-hand rotation Hnodpszdi R Defx Abven Illumination Stepless speed control from 125 to 2,000 rpm Table size: 340 x 280 mm The machine has been technically inspected and is in very good condition.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, control type: NC control, controller manufacturer: Siemens, controller model: S7, working width: 3,000 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge: 1,000 mm, overall weight: 9,000 kg, total length: 2,700 mm, total width: 4,300 mm, total height: 2,000 mm, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Motorized Swivel Bending Machine Manufacturer: HERA, Type: SM4-3000x6mm Year of Manufacture: 1998 Technical Data Manufacturer: HERA Type: SM 4 Year of Manufacture: 1998 Capacity: 3020 x 6 mm Upper die opening: 450 mm! Lower die adjustment: 80 mm Working height: 900 mm Motor power, upper die drive: 5.5 kW Motor power, bending die drive: 11 kW Dimensions: approx. L 4.3 x W 2.7 x H 2.0 m Weight: approx. 9 t Equipment • Motorized bending die adjustment for sheet thickness setting • Hydraulic upper tool clamping! • Bending dies: 12 mm, 20 mm, 40 mm • Shear dies: 1 piece continuous shear die 30° 1 piece segmented shear die 30° (installed in the photos) 1 piece segmented shear die 45° • Goose-foot tool, approx. 240 mm high, segmented • CNC-controlled back gauge, 1000 mm • CNC control Siemens S7 All information is subject to change without notice. Hnjdozcykmopfx Abvjn An inspection while the machine is running is possible at any time in our showroom.

Condition: used, BORRIES Marking Systems EK-BOX ZAM 1-2: 1000198 Hnjdpfx Abozcq N Hovjn Condition: used (functional).

Condition: used, weight / kg Hodpfx Aozcq Iijbvonn

Condition: good (used), 1 used twist drill grinding machine Hnsdpjyl Idaofx Abvsn Manufacturer: Darex Model: XT 3000 Technical data Motor: 230 Volt – 0.2 kW – 50 Hz Speed: 2850 rpm Grinding type: Conical surface, cross grinding Point angle: 118°–150°, steplessly adjustable Grinding range: 3–21 mm Dimensions (W x D x H): 410 x 410 x 260 mm Weight: 25 kg Equipped with: Grinding attachment and cross table for grinding countersinks

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Hnodpfx Absmnntmevon Year of manufacture: 1987 Technical data: - simple operation - grinding by means of gear motor - twist drill dimensions 3 - 50 mm - point angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg - with - clamping device - presetting device

Condition: used, 1 used column-type drilling machine Brand: Alzmetall Model: AB 3 ESV Drilling capacity: Ø 32 mm 3 automatic feed rates Spindle taper: MK 3 Distance spindle nose - table: 545 mm Throat: 290 mm Quill travel: 160 mm Hedpfsyqr Dhjx Abvsnn Column diameter: Ø 220 mm Dimensions: 1150 x 650 x 2000 mm Weight: 850 kg

Condition: used, Year of construction: 1993, 1 used column drilling machine Brand: Alzmetall Model: AB 36 Year of manufacture: 1993 Spindle taper: MK 4 Drilling capacity in steel St 60: 34 mm Drilling capacity in cast iron GG 20: 40 mm Max drilling capacity in St 60: 40 mm Thread cutting in ST 60: M 24 Thread cutting in GG 20: M 30 Reach: 330 mm Hodpfx Aey H Dfwebvenn Column diameter: 145 mm Spindle stroke: 160 mm with automatic drilling feed Total power requirement: 1.3 kW Machine height: 1865 mm Weight approx. 470 kg

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm Hnjdstzctmjpfx Abvon usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg