Used Drilling Machine Series for sale (66,983)

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment. Special drilling machine for staircase construction, window construction, and universal applications due to pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily realized thanks to the rotatable drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Fgjdpfx Aeyfta Tjm Eei Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching is then done pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be placed on the table at the front and rear 2 swivel workpiece supports 2 side stops, also usable as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swivel elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° Fjdpszk N S Usfx Am Eogi - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Availability: at short notice Storage location: 63934 Röllbach

Condition: refurbished (used), machine/vehicle number: MT361, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, drilling depth: 120 mm, height adjustment type: mechanical, rotational speed (max.): 3,600 rpm, rotational speed (min.): 40 rpm, total width: 540 mm, total length: 1,155 mm, total height: 2,060 mm, table width: 470 mm, table length: 510 mm, overall weight: 400 kg, year of last overhaul: 2024, travel distance Z-axis: 300 mm, distance table to spindle center: 455 mm, spindle speed (max.): 3,600 rpm, spindle speed (min.): 40 rpm, Equipment: CE marking, For sale: Aciera 22K1 bench drill with VA head Art. MT361 Features: - Drilling capacity in steel, 60 daN/mm²: 22 mm - Tapping capacity in steel, 60 daN/mm²: M18 - Spindle stroke: 120 mm - Spindle diameter: 65 mm - Drilling head stroke: 300 mm - Three-phase motor: 700/1400 rpm - Motor power: 0.74/1.1 kW - CCEA Trackalpha LED lighting mounted on 2 supports - Spindle speed with gearbox: 40-560 rpm Fgjdpfx Amsz R A Uhe Esi - Spindle speed with direct drive: 275-3600 rpm - 6 automatic feeds: For n=40-560 rpm: 0.12-0.25-0.6 mm/rev For n=275-3600 rpm: 0.02-0.04-0.1 mm/rev Machine completely overhauled with new electrical components, spindle nose protection, and CE conformity certificate. Machine price: CHF 15,000,- (excluding VAT)

Condition: used, Year of construction: 1985, Used Machine Fedpfxjzk N Dwj Am Eegi Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft - 1.5 kW motor with 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits - Machine needs to be inspected/serviced. Basic functions are intact Availability: available shortly Location: 63934 Röllbach

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, year of last overhaul: 2024, Well-maintained drilling machine for sale due to expansion; it was also overhauled in 2024 and has been in our inventory since 2024. Fjdpfx Amezhby Ss Eegi

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: 326289/205, travel distance X-axis: 1,600 mm, travel distance Y-axis: 450 mm, overall weight: 3,850 kg, Universal milling machine "Prvomajska GKA-30S" with a complete set of accessories. Work table 1600x450, rotatable. Accessories: - new MK40 spindle - vertical and horizontal indexing heads Fgedpfx As Agrrrjm Esi - complete set of mandrels MK 50 and MK 40 - consoles for horizontal milling with mandrels - operating manuals for the milling machine and indexing heads

Condition: used, rotational speed (max.): 1,400 rpm, rotational speed (min.): 80 rpm, table width: 470 mm, table length: 620 mm, Column-type drilling machine Manufacturer: ALZMETALL Type: AB 3 ESV Technical specifications: Overhang (throat depth): 285 mm Stroke: 160 mm Table dimensions: 620 x 470 mm Speed ​​range: 80 – 1,400 rpm Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and information; Fsdpfxe Aivw Ro Am Eogi prior sale reserved!

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM universal head Fgsdjvm Akgopfx Am Eji portable radial

Condition: good (used), functionality: fully functional, Radial drilling machine in very good condition for sale. Type Breda R45 1210. The machine is in perfect working order and can be inspected while running. - Spindle speed: 45-1600 rpm - Automatic feed in 0.05; 0.10; 0.20; 0.30 mm/rev. Fgeds Ahka Repfx Am Esi - Coolant pump - MK 5 chuck - Approx. 2200 kg Loading with forklift or crane. Delivery or shipping possible by arrangement.

Condition: used, 2-head spindle paper drilling Nagel Citiborma 280B 2-Spindel-Papierbohrmaschine - 2-head spindle paper drilling Nagel Citiborma 280B Fgedpfx Amo Ahzxzs Eji Baujahr / Year 2001 - Serial-No. 01052175 Standgerät / standing device Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1995, bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 180 mm turning speeds 45-1750 U/min 615 x 420 mm total power requirement 2,2 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,2 x 0,8 x 2,15 m Fode Ahziaopfx Am Eegi Equipment: - Robust pillar drilling machine - Infinitely variable speed adjustment (V-belt) - Thread-cutting device - Automatic spindle feed * With electromagnetic engagement - Multi-speed (pole-changing) motor - Clockwise/counter-clockwise spindle rotation - Drilling depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Coolant system - Machine vise - Emergency stop

Condition: used, Column drill press ALZMETALL Type AB 3 ES Machine No. 21703 Year of manufacture 1981 Drilling capacity 32 mm Spindle mount MK 3 - long quill Overhang 290 mm Quill stroke 160 mm Table size 510 x 300 mm Column diameter 115 mm Spindle speed 55 - 1450 rpm, infinitely variable Motor power 0.9 and 1.3 kW, pole-reversible - Spindle speed controlled via 2 gear stages, 2 motor speeds and infinitely variable via a variator gearbox - Pre-selection stage for high torque at low speeds - Tachometer for spindle speed - Table height adjustment via hand crank - Machine light - Emergency stop via foot pedal and rocker switch - Quick-change drill chuck 1 to 13 mm Space requirement L x W x H 1200 x 650 x 1900 mm Weight 400 kg Very good condition Fgsdpfx Ame Ah Igcs Eji Machine tested with a drill bit Ø 30mm in steel - runs very well.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Used, well-maintained V-TRADE quick-change drill press, model: ZX3840. Drilling capacity in steel: 40mm. Thread cutting up to M30. Spindle taper: MK4. Spindle speed range, steplessly adjustable via two gear stages: 50-315/315-2000 rpm. 8 automatic feeds: 0.08-0.5mm/rev. Fjdpfoz Tdkvjx Am Esgi Spindle extension. Quick-change chuck: RÖHM. Machine vise. Halogen lamp. Machine feet. Technical data and dimensions: Subject to change.

Condition: used, Year of construction: 1966, Technical details: bore capacity in steel (diameter): 63 mm arm length:: 2000 workpiece height max.: 1270 mm spindle taper MT: MK 5 drill depth: 400 (Hub) mm quill stroke: 400 mm feed: 0,05 - 0,32 m/min revolutions per minute spindle:: 14 - 1000 (40/50/63/160+200 o.Funktion) U/min column turnable: 360 ° electrics - voltage/frequency: 380/50 V/Hz base plate: 1900 x 950 mm total power requirement: 13 kW weight of the machine ca.: 7,9 t space requirements approx. LxWxH: 3,9 x 1,5 x 3,4 m This radial drilling machine has an electric sliding table! Further features: - Distance from spindle center to stand: 360 - 2000mm - Distance from drill chuck to table top: 1270mm - Distance from spindle to base plate: 1220 - 4520mm - Drilling capacity in St 60: 63mm at feed rate 0.32 - Drilling capacity in GG 22: 80mm at feed rate 0.5 - Horizontal travel of the drilling head: 1640mm Fgodeu Id Dbspfx Am Eji - Vertical travel of the drill head: 980mm - Distance from spindle nose to base plate: 430-1770mm Equipment: - Coolant pump (out of function) - Support stand - 1 electrically driven sliding table 1250 x 1000mm type TI 18 with digital display (interface to the machine) - incl. machine vice Not all revolutions are currently selectable. i.D. *

Condition: excellent (used), Year of construction: 2000, Table clamping surface: 600 x 300 mm Travel range: X 350 Y 250 mm Adjustment range W-axis (motorized): 200 mm Servo-controlled EDM axis Z: 340 mm Fgodpfx Amsw Hyfys Esi Drilling with electrodes from Ø 0.2 to 4 mm Max. workpiece weight: 300 kg Connected load: 3.5 kVA Machine weight: 700 kg

Condition: excellent (used), Catalog number: 8071 Fgodpjzuk Aisfx Am Eei TECHNICAL DATA - Number of spindles: 21 pcs - Distance between extreme spindles: 640 mm - Spindle spacing: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 900x350 mm - Height to table surface: 900 mm - Stroke of the feed cylinder (drilling depth adjustment): 50 mm - Drilling speed: pneumatically adjustable - Drilling angle: manually adjustable - Main motor: 1.5 kW - Side fences: 400 mm - Compressed air requirement: 6-8 bar - Diameter of the dust extraction nozzle: 60 mm - Dimensions (L/W/H): 1000x860x1270 mm - Weight: 267 kg ADVANTAGES - Made in Italy - For 21 spindles – drill mounting with quick-release couplings - Vertical, horizontal, and angled drilling - Unpainted - Used drill press, very good condition Net price: 6900 PLN Net price: 1600 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Fgodpfo Ahyuxox Am Eei Total power requirement 83 kW Additional information incl. 15 plates

Condition: excellent (used), Catalog number: 7859 ADVANTAGES – for 8 spindles – with oscillation – variable spindle spacing (adjustable) Fsdpfx Ajzxg A Tom Eegi – 2 worktables – unpainted – used drilling machine, very good condition TECHNICAL DATA drilling spindles 2 x 4 pcs oscillation range right/left 40 mm per side oscillation speed adjustment via frequency inverter head with spindles adjustment up/down each pair of spindles (2 pcs) adjustable right/left 2 types of rotation speeds + right/left max. tool diameter 15 mm table adjustment up/down table dimensions 700 x 200 mm 4 hydraulic cylinders motor power 2 x 2 kW oscillation motor 0.75 kW dimensions L/W/H 1800 x 1350 x 1300 mm weight 862 kg Net price: 16,900 PLN Net price: 3,930 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, total width: 1,400 mm, total length: 1,000 mm, total height: 2,700 mm, Colour: Green Empty weight: 1.500 kg - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 3 - Table type: Fixed table - Table length [mm]: 650 Fgsdpfxezwc Sbe Am Eoi - Table width [mm]: 540 - Drilling depth [mm]: 280 - Drilling capacity [mm]: 40 - Reach [mm]: 315 - Tool holder: MK4 - Main spindle power [kW]: 3.0 - Min. spindle speed [rpm]: 1 - Max. spindle speed [rpm]: 1000 - Options: Drill unit feed, Tapping function - Transport dimensions: 1000mm x 1400mm x 2700mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: from below & from the front - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Passage dimensions: max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see images) Fsdpfx Aozk Nuiom Esgi Availability: at short notice Storage location: Röllbach

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, High-precision drilling and milling machine Fehlmann Model Picomax 56TOP Heidenhain TNC 620, excellent condition, CE compliant!! Technical data: Fgjdps Agaruofx Am Eoi >> Year of manufacture: 2014, Machine No. 14214621 >> Travel ranges X/Y/Z: 500/400/400 mm >> Distance between table and spindle nose: 120-520 mm >> Clamping area (L x W): 908 x 480 mm >> Spindle speed range: 50-12000 rpm >> Drive power: 9.5 kW >> Tool magazine: Number of positions: 20 >> Footprint (W x D x H): 1700 x 1900 x 2500 mm >> Weight approx. 3000 kg About the machine: The top-of-the-line machine for manual and CNC operation with an innovative Fehlmann operating concept: user-friendly, fast, and economical. The precision milling and drilling machine PICOMAX 56 TOP (Touch Or Program™) is available with a completely new operating concept that combines 3-axis CNC operation with manual operation via drilling lever and handwheels. Specifically designed to quickly, safely, and efficiently perform milling, drilling, and threading operations on individual parts without time-consuming programming. Even after a short training period, the PICOMAX 56 TOP milling machine can be used extremely economically by skilled personnel, even without programming knowledge. Even in its basic configuration, the FEHLMANN milling machine 'Made in Switzerland' offers various features of a modern, high-performance milling machine, such as: fully digital CNC Heidenhain control TNC 620, a Fehlmann-specific, liquid-cooled, and high-torque motor spindle for universal milling up to 12,000 rpm, as well as Z/S-interpolated threading, 3D milling, and turning. The tool holders and accessories (see pictures) are included. Absolutely excellent condition. Mechanically and electrically inspected. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: good (used), machine/vehicle number: 10403, Standart Machine 4-head Fgedezqr Sdepfx Am Eei

Condition: good (used), Year of construction: 2008, Ref. -No.: 10649 Manufacturer: JUARISTI Type: TX1D Year of construction: 2008 Type of control: CNC Control: Heidenhain TNC 530 Storage location: Halberstadt Country of origin: Spain X-Travel: 4000 mm Y-Travel: 2500 mm Z-Travel: 2000 mm B-Axis: 360 ° C-Axis: 0,005 ° Rotary Table (Lxw): 1600 x 3000 mm Table Load: 4000 kg Tool Taper: SK50 Numbers Of Tools In Magazin: 100 Spindle Speed: 3500 RPM Drive Capacity - Spindle Motor: 25 kW Further information: - Weight limit for milling ⁓ 4000 kg - X-axis with rotary table and swivel head - 3 indexing tables, approx. 200 - Internal coolant supply (IKZ) is standard Fjdpfxj Ahw N Sj Am Eogi - Welding stand capable of welding and powder coating up to 6.3 t and 10 m in length with a 2 x 2.5 m cross-section The machine can be viewed while powered on by prior arrangement.

Condition: used, machine/vehicle number: 1203-5, Table size: approximately 1200 x 600 mm, with a machine vise. Fgjdpo Af Nktsfx Am Esi

Condition: used, CNC turning machine MONFORTS, Type RNC 300 MultiTurn with powered tools and Y-axis Fjdpfszfau Ajx Am Eegi Year of manufacture 2005 CNC control FANUC Series 18i-TB Turning diameter over bed slide cover 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 volts, 50 Hz, 63 amps - hydrostatic guides for the X, Y and Z axes - with tailstock - main spindle with chuck and collet chuck system - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - collet chuck system HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 powered tools with collet ER 25 - chip conveyor with integrated coolant system - approx. 20,000 operating hours Machine footprint with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition