Used Dry Tunnel for sale (3,320)

Condition: new, Year of construction: 2026, Dry rotary vane vacuum pump. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 80 m3 / h at 50Hz. Final vacuum: 150 mbar abs. Kjdoftzkqjpfx Ab Tjln Any clarification, do not hesitate to contact us.

Condition: excellent (used), mytron 160 K CO2 Dual Incubator Kledpfx Aboyfq U Io Ten The CO2 incubator 160/160K ensures that cell and tissue cultures growing in vitro experience environmental conditions that closely mimic the physiological values ​​of the organism. mytron 160 K CO2 Dual Incubator The CO2 incubator 160/160K provides in vitro growing cell and tissue cultures with environmental conditions that closely resemble the physiological values ​​of the organism. Interior volume: approx. 160 l Weight: 70 kg Air circulation: via fan Cooling: refrigeration unit Temperature display: setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15 °C to 70 °C at 23 °C ambient temperature Temperature stability: +/- 0.2 K over time Humidity display: setpoint and actual value display Humidity range: ≥95% Humidity stability: +/- 2.5% CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 stability: +/- 0.2% CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 amps W x H x D = 130 x 85 x 70 cm Financing through our bank is also possible. komplett-konzept.leasingo.de Buy incubators and other products at great prices - Here you'll find products from professionals for professionals - Find more attractive offers in our shop

Year of construction: 2017, condition: excellent (used), 6-fan dry cooler from Alfa Laval in good condition, year of manufacture 2017, equipped with 2 systems: HT and LT. Kljdoyfhx Dopfx Ab Tsn

Condition: good (used), drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet -Manufacturer: Laboratory Müszeripari Müvek, chamber dryer oven type LP-321/2 -Usable space: WTH 500x520x660 mm -Heating power: 3.3 kW -Working temperature: 30 to 270°C -Door seal: silicone -Individual components: see photos -Installation dimensions: 2510/1600/H3760 -Transport dimensions: 990/740/H960 mm Kedsulpz Ejpfx Ab Toln -Weight: 153 kg

Condition: good (used), Metal detector for conveyor belts, all-metal detection system, tunnel metal detector Kedorz Syyspfx Ab Teln -Manufacturer: SS Temafa, Metal Detector All-Metal Detection System -Metal detector: SS TFX 4000/440 -Detector opening: Ø 440 x 530 mm -Control: Temafa MSG 4-FF -Individual components: see photos -Dimensions: 750/530/H790 mm -Weight: 96 kg

Condition: good (used), drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet Kjdpfx Abevg Hb As Tsln -Manufacturer: MLW, drying cabinet type WSU102 -Usable space: WHD 500x420x435 mm -Heating power: 2.16 kW -Nominal temperature: 320°C -Individual components: see photos -Dimensions: 630/1000/H840 mm -Weight: 118 kg

Condition: used, Grinding bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory finishing round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies, drying granules, desiccant -Manufacturer: Walther Trowal, drying granulate type GM -Grain: see photos -Price/tax: complete Ksdpfx Aborxw E Eo Teln -Transport dimensions: 1200/800/H600 mm -Total weight: 72 kg

Condition: good (used), Drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet, universal oven -Manufacturer: Heraeus, drying cabinet universal oven type T 6120 with viewing window -Useful space: BTH 550/370/495 mm / 100 liters -Heating power: 2.2 kW -Nominal temperature: 300°C -Voltage: 230 V -Individual components: digital temperature controller, adjustable ventilation flap -Dimensions: 940/585/H720 mm -Weight: 72 kg Ksdewbc U Hopfx Ab Tsln

Condition: good (used), Drying oven, drying cabinet, electrode re-drying, electrode cabinet, electrode dryer -Manufacturer: Meyer, drying oven type ES 2 -Power: 0.2 kW -max temperature 110 °C -Voltage: 110 V -Usable space: Ø 100 x 430 mm / 2 packages of electrodes -Number: 18x dryers available -Price: per piece -Dimensions: 170/170/H565 mm Kodswbdiljpfx Ab Teln -Weight: 7.8 kg/piece

Year of construction: 1987, condition: used, Drying oven, drying cabinet, chamber dryer oven, heating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet Klodpfxjryalbo Ab Tsn -Manufacturer: GFO, chamber dryer oven type KE-SO -Useful space: 1 m³ / 1000x1000x1000 mm -Heating power: 40 kW -max temperature 350°C -Working temperature: 100 to 300°C -Individual components: see photos -Setup dimensions: 2510/1600/H3760 -Transport dimensions: 2510/1600/H2380 mm -Weight: 1500kg

Condition: used, UV dryer, UV lamp, UV high-performance lamp -The lamps come from a UV paint drying process Kedpscft Tvjfx Ab Tsln -Working width: 1400 mm -One housing -UV range: 180 - 450 nm -UV tube type: CK 110/80 -Emitter power: 80 W / cm -Number: 2x tubes available -Price per piece -Transformers and accessories: available for an extra charge -Dimensions: 1720/340 / H630 mm -Weight: 94 kg / piece

Condition: good (used), functionality: fully functional, Frigoscandia FloFreeze MX62 IQF tunnel freezer in good condition, operating on NH3 (ammonia). Suitable for rapid, individual quick freezing of products such as vegetables, berries, shrimp, and pasta. Supplied complete with infeed/outfeed systems, shaker, optional glazing conveyor, evaporators, control cabinets, Danfoss frequency converters, and Siemens TP1200 Comfort HMI (upgraded in 2020). Products are placed on the infeed shaker (approx. 1200 mm high), where they are separated and desticked. They are then transported into the freezer via a blue plastic conveyor belt. The belt is approximately 7400 mm long and 1190 mm wide, featuring a lowering mechanism that redistributes products and removes ice. The discharge height is 912 mm. The optional Innotec Systems glazing belt can apply a protective ice coating. The MX62 is equipped with two NH3 evaporators and six centrifugal fans, each driven by an ABB M2AA160MA-2 motor (50 Hz, 13.2 kW, 2897 rpm). Cold air is blown up through the conveyor to prevent product sticking. The evaporators can be defrosted with hot air via spray nozzles. The freezer is fitted with three inspection hatches. Includes the original control cabinets with frequency converters and Siemens control system. The FloFreeze MX62 specifications: - Dimensions: 7400 x 4700 x 3000 mm (L x W x H) - Effective belt length: 7400 mm - Effective belt width: 1190 mm - Infeed height: 1200 mm - Discharge height: 912 mm Tunnel freezer capacity (examples): Product: Green peas - Capacity: 3,600 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C Product: Cauliflower - Capacity: 2,520 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: 25 to 40 mm Product: Tomatoes - Capacity: 1,440 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: approx. 30 mm Product: Strawberries - Capacity: 2,520 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: 25 to 35 mm Product: Potatoes - Capacity: 1,800 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C Klodpfx Aboxz Eaco Tjn - Evaporator temperature: -40°C - Piece size: approx. 25 mm Product: Meat - Capacity: 2,340 kg/h - Infeed temperature: -3°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: cubes of 20 mm

Condition: new, Year of construction: 2026, functionality: fully functional, Blast freezing containers are designed to rapidly freeze your fresh products at temperatures down to -36/-45 °C. By freezing fresh goods immediately after production, long shelf life and safe consumption are ensured. SIZE: 10,000 x 2,940 x 3,100 mm CABIN: 7,000 x 2,600 x 2,200 mm CAPACITY: 6,500–8,000 KG/24H Kodpeydlv Dofx Ab Toln MOTOR: 65 HP DORIN DEFROST: 36 KW RESISTANCE EVAPORATOR: 4 x 630 mm BLAST FAN COMPLETE STAINLESS-STEEL PANEL, 200 mm

Condition: good (used), UV dryer, UV lamp, high-performance UV lamp Kledpfx Aocft T Hob Tsn -the lamps come from a UV paint drying process -Working width: 1400 mm -Double housing -UV range: 180 - 450 nm -UV tube type: CK 110/80 - Radiator power: 80 W/cm² -Quantity: 3x dryer lamps, each with 2 tubes included Price: per piece -Transformers and accessories: available at extra cost (2x ID13948 and 2x ID13949 or ID13950) -Dimensions: 1720/400/H630 mm -Weight: 126 kg/piece

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 Klodpfjyg H Dzex Ab Tjn 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, The comfortable Varioflex rack trolley is designed for the flexible and gentle storage of painted workpieces. Additionally, its 4 swivel castors allow for easy transportation of the workpieces. Its robust tubular frame construction can be adjusted from 200 to 2000 mm. With 17 inner and outer support tubes per side, the trolley can carry loads up to 400 kg when evenly distributed. The removable inner and outer support tubes can be taken out if required and reinserted at the back. When not in use, the rack trolley can be compactly folded for space-saving storage. Optional accessories: - Plastic-coated support tubes - Additional rack Technical Data: Length: 200 - 2000 mm Depth: 870 - 1180 mm Height: 1855 mm Support tube length: 650 mm (extendable to 1150 mm) Clear distance between the tubes: 70 mm Capacity: 400 kg Kjdpfx Aow I Ux Njb Tsln The image shows optional accessories (additional rack).

Condition: new, Gas-heated bogie hearth drying oven (not for flammable paint) temperature max.: 420°C burners heating power:300 kW divided on 2 burners / zones circulation fans: 2 x 5,5 kW = 11 kW Kodscmrxdspfx Ab Toln el. total connected load: approx. 15 kVA control zones: 2 PLC: Siemens S7 approx. external dimensions (w x h x d): 4700 x 4200 x 6000 mm length with extended bogie hearth: 11.000 mm internal dimensions (without bogie hearth) width: 4000 mm hight: 2900 mm (2500 mm usable with bogie hearth) lenght: 4000 mm max. charging weight:20.000 kg net

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: Type:8657, empty load weight: 2,200 kg, power: 5.5 kW (7.48 HP), total length: 7,500 mm, operating pressure: 6 bar, pressure: 6 bar, For sale is a used Veit Tunnelfinisher 8657 for garment finishing, equipped with 2 Veit electric steam generators, each with 60 kW electric capacity. Year of manufacture: 2015. Infeed and outfeed conveyors, each 8 meters long, are included. The system was dismantled by us in September and is available for inspection at our warehouse. You can view its operation on YouTube: Veit Tunnelfinisher 8657. Klsdpfexrp Ewsx Ab Ten

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, empty load weight: 2,200 kg, The Veit Tunnelfinisher 8657 is the ideal solution for garment finishing. The maximum throughput is approximately 2,200 pieces. We have dismantled the system, and it is available for inspection at our warehouse. Garments are transported through the finisher by a chain conveyor with hook system. Each 8 meters of infeed and outfeed conveyors are included. Additionally, electric steam generators and an air compressor can be offered. Kjdpeyffpaefx Ab Tsln

Year of construction: 1990, operating hours: 23,710 h, condition: ready for operation (used), This dryer from Motan is in machine storage at Plastima Used Machinery. The dryer is from 1990 and is in good condition. Klodpfx Aemgadpob Ton – Brand: Motan – Model: MDC 800 – Construction year: 1990 – Working hours: 23,710

Condition: used, Year of construction: 2020, functionality: limited functionality, overall weight: 150 kg, GRUNDFOS Electronically Controlled Dry-Running Pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-Stage Inline Pump Art. 99114824 Kledpfxoyc T Ape Ab Tsn PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA Motor We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but fully operational. The pump was functioning flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Rated flow: 135 m³/h Rated head: 20.1 m Mechanical seal: BAQE Pump housing: Cast iron Impeller: Cast iron Gross weight: 157 kg For further technical details, please refer to the nameplate. Scope of delivery as shown. Inspection prior to purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge ports in inline design. Suction and discharge ports have the same diameter. The pumps are constructed according to the top-pull-out principle, i.e., the pump head (motor, headpiece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the piping. The pump is equipped with an unbalanced rubber bellows seal. The mechanical seal complies with EN 12756. Piping connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump features a fan-cooled permanent magnet synchronous motor. The motor efficiency corresponds to energy efficiency class IE5 according to IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated into the motor terminal box. Electronic speed control enables continuous adaptation of motor speed and thus pump output to current demand. The pump is equipped with a differential pressure sensor.

Year of construction: 2015, operating hours: 8,286 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: Drymex S 5, Beautiful, robust drying system consisting of 2 units, 1 large stainless steel drying chamber with perforated floor, including piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food products (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), permitted for indoor use only. The individual segments of the perforated floor can be lifted up separately for cleaning. Excellent condition, very solid construction. Dimensions: Units – 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301. Unit 1: Year of manufacture 2012, Unit 2: Year of manufacture 2014, Drying chamber: Year of manufacture 2015. Price negotiable. Klsdsyffqqepfx Ab Tjn

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Klsdovllxdopfx Ab Ton Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Ksdpforzq Arex Ab Teln Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Year of construction: 2011, condition: good (used), Drying oven, tempering oven Caltherm 200 C For sale in excellent condition, CALTHERM manufactured air-mixed multi-purpose Convection oven heat treatment oven electrically heated oven with one chamber, with air mixing manufacturer: Caltherm J7172 year of manufacture: 2011 internal dimensions: width: 300cm height: 200cm length: 185cm over design temperature:200 °C Test Temperature: 200 °C Time to get to set point: 45 min number of elements: 12x 3,6kw fan motor: 15kw Total recommended Power supply of plant : 100A Type of temperature control: West 6400 external dimensions: width: 430cm Klsdpfx Aovu Hvpjb Tjn length: 330cm height: 300cm weight: ca 4800kg