Used Dunkes Dn 4 for sale (37)

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 Ppjdpfx Aedzp T Njmijr - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: used, Year of construction: 1991, pressure 100 t distance between columns 770 mm stroke 200 mm distance table/ram, stroke up 800 mm Table area 770 x 900 mm table height above floor 850 mm die cushion pressure in table 40 t die cushion stroke in table 200 mm die cushion area in table 600 x 600 mm side window 600 mm ram surface 770 x 900 mm speed down 62 mm/s speed up 350 mm/s Pjdjvut Ufjpfx Amiepr working speed 17,5 mm/s oil volume 700 l power requirement 42,0 kW weight 9,0 t Dimensions (WxDxH) 2,6x 2,0 x 3,8 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, cutting impact cushioning, depth stop No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F - Video at seller's site before dismantling available

Condition: good (used), functionality: fully functional, Type DZ 4 Press force at 6 bar 4 t Press force at 12 bar 8 t Table size W x D approx. 280 x 280 mm Installation height 350 mm Throat depth 160 mm Ppsdpfx Amjyr Siasier

Condition: good (used), Manufacturer: Dunkes Type: DN 2 Thrust: 2t Diameter: max: 12mm Table dimensions: 210 x 200 mm Motor power: 0.55 kW Machine weight approx.: 130 kg Ppsdovxrzlopfx Amior The dimensions of the machine are approx. 0.40 x 0.50 x 1.00 m

Condition: used, Year of construction: 1975, pressure 40 t throat 280 mm stroke 160 mm dayligth 420 mm table surface area 2000 x 500 mm table height over floor 870 mm ram surface 85 mm Ppsdpfx Amoyx Ihajisr power requirement 7,5 kW weight of the machine ca. 3,2 t required space 1,7 x 2,0 x 2,3 m with oilhydraulic drive, shaft straightening device, manual lever control can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm Podevuuckjpfx Amispr hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: good (used), Year of construction: 1994, functionality: fully functional, operating hours: 25,000 h, pressing force: 400 t, table width: 1,250 mm, table length: 1,240 mm, table height: 1,125 mm, oil tank capacity: 3,400 l, total width: 3,500 mm, total height: 4,600 mm, installation height: 600 mm, Further images and technical data can be provided by email upon request. Sale is ex-location without warranty and return. Dismantling and collection must be carried out by the buyer. The press is standing at ground level without a base. We deliver the press media-free. The digital hours counter is no longer accurate. The manual counter shows approximately 25,000 hours. Pedpjvb D Trefx Amiepr

Condition: excellent (used), machine/vehicle number: P90-6924, functionality: fully functional, OSCILLATING RIVETING MACHINE, BENCH MODEL TYPE DNX 05 Condition: very good, fully operational Price: €5,000.00 ex works Ppjdpfxexlg Ate Amisr

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Pedpoy E I Nqsfx Amiepr Hydraulic double-column straightening press Dunkes Type HDSR 75 Year of manufacture: 1977 Pressing force: 165 t 3 cylinders, pressing force per cylinder: 75 / 65 / 25 t Table: 1500 x 500 mm Stroke: 350 mm Drive power: 3 / 15 kW Weight: 6 t Price: EUR 2,750— plus VAT, ex location

Condition: excellent (used), pressure 16 t Pjdpfx Ajyrhmhsmiopr weight of the machine ca. 16 t

Year of construction: 2008, operating hours: 2,008 h, condition: ready for operation (used), overall weight: 15,000 kg, This Dunkes HZS 160 Bending machine was manufactured in the year 2008 and has 2250 production hours. The machine is in good condition and well maintained. Machine Benefits Qualitative Machine Benefits Ppjdpsyzf A Tjfx Amior • The machine is in good condition and fully functional

Condition: used, Year of construction: 1989, pressure 16 t throat 200 mm stroke 160 mm dayligth 490 mm table surface area 1300 (3300) x 250 mm table height over floor 935 mm ram surface 65 mm Psdpfx Aeyx Ii Rsmijpr power requirement 4,0 kW weight of the machine ca. 2,2 t required space 1,4 (5,4) x 1,3 x 2,4 m with oilhydraulic drive, shaft straightening device length of straightening table approx. 1300 + 2x2000 mm can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1985, pressure 100 t stroke 650 mm throat 380 mm dayligth 950 mm table surface area 800 x 700 mm table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s feed up 375 mm/s working feed 0 - 16 mm/s Psdpeyx Ihyofx Amijpr oil volume 350 l power requirement 18,5 kW Weight 9,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation can be offered with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1992, pressure 6,3 t stroke 305 mm throat 250 mm dayligth 850 mm table surface area 470 x 450 mm Psdjv Svbcopfx Amiopr table height over floor 800 mm ram surface 40 mm feed down 120 mm/s feed up 510 mm/s working feed 21 mm/s oil volume 175 l power requirement 2,2 kW Weight 1,5 t dimensions of the machine ca. 1,0 x 1,55 x 2,6 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 1650 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1250 mm die cushion capacity 80 t die cushion stroke 300 mm die cushion area 1300 x 900 mm Podpfxexwdrvo Amijpr table height over floor 800 mm ram surface 1600 x 1250 mm oil volume 2000 l power capacity 43,0 kW weight 25,0 t Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m height beneath floor 0,85 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: good (used), Year of construction: 1980, Straightening force: 100 t Pedpsvgcpcefx Amiepr Thrust: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pillar speed up: 206 mm/s Pillar speed down: 68 mm/s Hydraulic drive: 380 V, 15 kW Space required: 3500 x 1650 x 2760 mm Weight: 5500 kg

Year of construction: 1976, condition: good (used), machine/vehicle number: H 76-467, Pressing force: 160 kN Ram stroke: 100 mm Installation height: 350 mm Hole in the table: 100 mm Ram bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar Ppjdoflrhzepfx Amisr electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx .: 1,2 t

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard Ppjdpfxov Rwu Ue Amijr with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Ppsdpfx Amsh Uhqyoier Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Year of construction: 1993, pressure 2 x 6,3 t stroke 307 mm throat 180 mm Podpfxovut Rmj Amijpr dayligth 900 mm table surface area 470 x 360 mm table height over floor 810 mm ram surface 45 mm feed down 137 mm/s feed up 33 mm/s working feed 540 mm/s oil volume 140 l power requirement 3,0 kW Weight 1,5 t dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm Ppedpfxovzxpho Amisr feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm table-size 650 x 500 mm stroke 400 mm dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens total power requirement 13 kW Pjdoxz Hfmspfx Amispr weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Machine light Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm table-size 650 x 500 mm stroke 400 mm dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Two side tables with a support surface of 850x500mm Pjdpfxjw D Hias Amiepr with hydraulic ball bars for heavy workpieces

Condition: used, Year of construction: 2001, machine/vehicle number: H01-3129, pressing force: 200 t, pressure:200 t passage width:1300x1300 mm stroke:1000 mm total power requirement:37 / 5,5 kW Podpfx Ajfhcc Nomiepr weight of the machine ca.:29500 kg dimensions of the machine ca.:2600x3000x5200 mm speeds::450 mm / freier Fall speeds::20 mm/sek tracking travel:130 / 60 ms oil pressure :283 bar capacity of oil tank:2200 L

Condition: used, Year of construction: 1982, Technical details: Pedpfx Aordlgismiepr pressure: 2,5 t