Used Weber Cf 4 for sale (105)

Condition: good (used), Year of construction: 2002, This line have slicer WEBER CCS 602 and packaging CFS 660. Fodpfx Apszlak Djwsgf Parts shown by hand not come.

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 Fgsdpev Tahisfx Apwjf -Dimensions: Ø 88 x 420 mm -Weight: 8.7 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 Fgsdjw Dbkropfx Apwjf -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece

Condition: used, power: 20 kW (27.19 HP), Year of construction: 2020, operating hours: 143 h, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at [phone number]). Weber TRC 86 - Compaction Roller - Year of manufacture: 2020 - with wireless remote control - 143 operating hours Price: €14,890.00 net / €17,719.10 gross Fgjdpoznrwhofx Apwof Operating weight according to CECE: 1,390 kg Tire width: 854 mm Compaction force: 75 kN Frequency: 32 Hz Amplitude: 1.70 mm Average static line load CECE: 9.80 kg/cm Gradeability: 50% (depending on the ground) Working/travel speed: m/min (depending on the ground) Drive system: hydrostatic, four tires Engine manufacturer/type: Lombardini LDW 1003 Engine type: 3-cylinder diesel, water-cooled Engine power, max.: 19.5 kW / 26.7 hp Engine power at operating speed: 15.6 kW / 21.3 hp at 2600 rpm The machine has a wireless remote control. The remote control is charged in the roller. Upon request, we will also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further information = Unladen weight: 1,390 kg Please contact Marius Herden for further information.

Year of construction: 2022, condition: used, For inquiries regarding the machine, please contact Mr. Herden at [phone number]. Weber CR 9 MDM Hatz-Diesel Vibratory Plate / Year of Manufacture: 2022 / Electric Start / DEMO Unit Selling price: €9,990.00 net / €11,888.10 gross Technical Data Engine: Hatz Diesel Maximum engine power: 11.0 (15.0) kW/HP Weight: 740 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm The reversible soil compactors of the CR series excel with high compaction performance and maximum efficiency. They are therefore the first choice for compaction work, from classic road and civil engineering to paving. Balanced running characteristics, high smoothness and low hand-arm vibration ensure a high level of operator comfort. - Precise, stepless, electro-hydraulic switching of forward and reverse direction via a touch switch - Engine protection - Throttle cable and hydraulic switching protected and routed in the guide rod - Low hand-arm vibration - Fatigue-free work with the height-adjustable hand guide rod - Protection of the machine and engine by means of a protective frame and complete engine cover - Reduced maintenance effort due to the self-tensioning centrifugal clutch - Easy service, as all maintenance components are easily accessible - Safe and quick loading thanks to large, foldable lifting eyes - Secure lashing for transport thanks to additional eyes in the engine console - Higher operator comfort thanks to electric start with operating hour counter, engine oil and battery voltage monitoring - Application areas: road and civil engineering, trench construction, garden and landscape construction, sub-base for paving, compaction of paving and compaction of sand, gravel or stone We have a very large selection of different vibratory plates in our warehouse, which are immediately available! Please contact us for this at [phone number] / [email address]. Fedpfsznrtpox Apwogf If desired, we will also be happy to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Weber MT program! Errors and prior sale excepted! Internal No.: 080682 = Further information = New: Yes Unladen weight: 740 kg Engine brand: Hatz Please contact Marius Herden for further information.

Year of construction: 2022, condition: used, Weber CR 9 MDM Hatz Diesel Vibratory Plate / Year of Manufacture: 2022 / Electric Start / DEMO Unit Selling price: €9,990.00 net / €11,888.10 gross Technical data Engine: Hatz Diesel Engine power max.: 11.0 (15.0) kW/HP Weight: 740 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm The reversible soil compactors in the CR series impress with their high compaction performance and maximum efficiency. For compaction work ranging from classic road and civil engineering to paving, they are therefore the first choice. Balanced running characteristics, high smoothness and low hand-arm vibration ensure a high level of operator comfort. - Precise, stepless, electro-hydraulic switching of forward and reverse operation via fingertip control - Engine protection - Throttle cable and hydraulic switching protected and routed in the guide rod - Low hand-arm vibration - Fatigue-free working with the height-adjustable handlebar - Protection of machine and engine by protective frame and complete engine fairing - Reduced maintenance effort due to the self-adjusting centrifugal clutch Fsdpfxjznrtio Apwjgf - Easy service, as all maintenance components are easily accessible - Safe and quick loading thanks to large, foldable lifting eye - Secure lashing for transport thanks to additional eyelets in the engine console - Increased operator comfort thanks to electric start with operating hour counter, engine oil and battery voltage monitoring - Areas of application: road and civil engineering, trench construction, garden and landscape construction, sub-base for paving, compaction of paving and compaction of sand, gravel or stone We have a very large selection of different vibratory plates in our warehouse, which are immediately available! Please contact us for this at . If desired, we will also be happy to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Errors and prior sale excepted! Internal No: 071417 = More information = New: Yes Unladen weight: 740 kg Engine brand: Hatz Please contact Marius Herden for further information.

Condition: ready for operation (used), Year of construction: 2013, A complete Weber slicing and packaging line is available. 1) Weber Type 904 slicer, cutting system: crescent blade, speed: 2000rpm, slice thickness range: 0.5mm-100mm. 2) CFS PowerPak 560 horizontal thermoforming packaging machine, year of manufacture: 2011, retrofit: 2013, film web width: 560mm, max. feed length: 650mm, max. forming depth: 130mm. 3) 2x CFS TL 150 cross-web labeling machines, year of manufacture: 2011, max. label width: 150mm, max. labeling capacity: 200/min. 4) Loma EMC in-line metal detector, year of manufacture: 2013. This is a complete slicing and packaging line with peripheral equipment. Documentation available. An on-site inspection is possible. Fodjzli T Iopfx Apwegf

Condition: ready for operation (used), Year of construction: 2007, A complete Weber slicer and packaging line is available. 1) Weber CZB infeed conveyor, year of manufacture: 2007. 2) Weber SCA scanning unit, year of manufacture: 2007. 3) Weber MCS 904 slicer, year of manufacture: 2007, knife type: sickle, max. speed: 2000rpm, slice thickness range: 0.5mm-100mm. 4) Weber inspection and reject unit. 5) Weber CNS transfer station. 6) CFS PowerPak PP 620 thermoforming packaging machine, year of manufacture: 2007, film width range: 320mm-700mm, max. forming depth: 150mm, index length: 800mm. 7) 2x labeling machines. 8) Weber MC-SA-F1040/500/200 tunnel metal detector. This is a complete slicer and packaging line including various molds, heat sealing tools, longitudinal slitter and rewind station. Documentation available. An on-site inspection is possible. Fgodpfozli T Uox Apwjf

Condition: ready for operation (used), Year of construction: 2006, A Weber slicer sickle knife grinding machine is available. Control levels: 3, version: CNS, max. blade length: 650mm, grinding angles: 22°/26°/28°/32°, grinding wheel dimensions X/Y/Z: 100mm/40mm/50mm, dressing wheel dimensions X/Y/Z: 50mm/25mm/20mm, blade cutting edge to rotor center distance: 400mm, machine dimensions X/Y/Z: approx. 1100mm/550mm/1800mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Fedpfx Apezli Ulowsgf

Year of construction: 2020, condition: excellent (used), Weber Legi-Air 4050E CC (Gen.3) – automatic print and apply labeling system with support frame For sale: Weber Legi-Air 4050E CC (Gen.3) – a professional industrial print and apply labeling system designed for automatic product labeling in production lines. Manufactured by Weber Marking Systems, this unit is designed for continuous operation in demanding industrial environments. The machine provides highly precise and efficient label printing and application, making it ideal for packaging and product identification processes. Fsdpfey Ickbex Apwsgf Technical data: Manufacturer: Weber Marking Systems GmbH Model: Legi-Air 4050E CC (Gen.3) Year of manufacture: 2020 Print resolution: 203 / 300 / 600 dpi Maximum print speed: up to 400 mm/s Capacity: up to 240 labels/min Application accuracy: ±0.8 mm Minimum label size: 10 x 5 mm Maximum label size: 160 x 350 mm Maximum applicator arm reach: 400 mm Power supply: 100–240 V AC / 50–60 Hz Power consumption: 700 W Operating pressure: 6 bar Air consumption: 0.1 – 3 l / cycle Additional information: sturdy support frame included, height adjustment on the legs and on the support column, maximum labeling head height on the support frame: approx. 140 cm from the floor, can operate in four directions: left / right / up / down. TAG: industrial labeler, labeling system, label printer, print and apply system, Weber Legi-Air, Weber Marking Systems, Avery Dennison labeler, Zebra label printer, Sato labeling machine, Novexx labeling system, Videojet label applicator, Domino print and apply, automatic label applicator, carton labeling machine, production line labeler, industrial labeling machine, packaging label applicator, automatic print and apply, product labeling system, industrial label applicator

Condition: ready for operation (used), Weber 1117033 04.07 screwdriving unit 438612/KW - Length: 48 cm, used, in good condition, 100% functional, delivery as shown in the photos. Fodpfex Dxq Hox Apwegf

Condition: good (used), Year of construction: 2014, approx. 8-10 units, labeling machine incl. printer – used: Price per unit, ex works: only €3,950.00 (net)! Price for the unit, year of manufacture 2023: €4,950.00 (net)! Fodpfozbylhox Apwjgf Manufacturer: Weber Type: Legi Air 4050EG, and e.g.: 4050E CC (Gen. 3 – year of manufacture 2023) Year of manufacture: 2014 Serial number: e.g.: 50001222 Includes stand and applicator (partially side-mounted, partially top-mounted) Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: used, functionality: fully functional, Grinding Machine Weber MSG 460 2 2 This universal Weber knife grinder has been specifically designed for sharpening circular knives. These knives require precisely sharpened edges, optimal cutting angles, and accurate cutting edge geometry. The machine ensures this with consistent, repeatable accuracy throughout the entire service life of the cutting tools. Fjdjzf Adtjpfx Apwegf The short setup time, combined with the non-driven grinding wheels, makes this an efficient machine for small to medium-sized meat processing companies. Specifications: Gbe Uc Ijzf Adtezu Rsp - Knife diameter working range: 420–460 mm - Grinding angle adjustment: 15°–35° - Voltage: 380 V (3 + N, 50 Hz) - Power: 0.18 kW - Weight: 91 kg - Machine dimensions (W × D × H): 570 × 670 × 1510 mm

Condition: excellent (used), WEBSITE HYDRAULIC RESCUE SET WEBER HYDRAULIK DIN 14800 H2 For sale: Professional hydraulic rescue set by WEBER HYDRAULIK, used in technical rescue operations by fire brigades, emergency services, and industry. The set includes: - Manual hydraulic pump - 2 hydraulic cylinders / spreaders Fgedpfx Asyxtcvjpwof - Hydraulic hoses - End fittings, adapters, extensions - Spreading and supporting elements - Original transport case - Documentation as shown in the photos Technical data: Manufacturer: WEBER HYDRAULIK Set type: Hebesatz DIN 14800 H2 Working pressure: 630 bar Lifting force: 80 kN or 150 kN Condition: Used Condition: - Fully operational - Complete set as pictured - Normal signs of use, paint abrasions - Stored in transport case Additional information: - Professional equipment - Ideal for workshops, technical service providers, emergency services, or collectors - Shipping or personal pickup available

Condition: used, Slicer Weber CCS 304 Fgjdpfxjzcxnks Apwjf The fully automatic Weber CCS304 slicer has been specially developed for slicing large volumes of meat, poultry, fish, and cheese. The machine is suitable for processing both fresh and cooked products, making it an ideal solution for medium-sized to large-scale food processing operations. Virtually all types of sausages and cheeses can be sliced without pre-freezing and arranged in either shingled (overlapped) or stacked portions. The slicer features a large product infeed with a maximum product length of up to 800 mm. Equipped with a large 460 mm blade, the machine can process a wide variety of products at speeds of up to 400 slices per minute. The intuitive touchscreen control system allows operators to easily program multiple slicing programs, enabling fast and efficient product changeovers. The machine is manufactured entirely from stainless steel. Technical Specifications - Production capacity: up to 400 slices per minute - Portioning options: shingled (overlapped) or stacked portions - Product infeed dimensions (W × D × H): 250 × 800 × 135 mm - Slice thickness range: 0.5–50 mm - Discharge height: 960 mm - Voltage: 400 V (3 + N, 50 Hz) - Power: 3 kW - Weight: 936 kg - Year of manufacture: 2007 - Machine dimensions (W × D × H): 3820 × 850 × 2120 mm

Condition: used, High-pressure hydraulic power unit up to 630 bar, WEBER Type E45 / 59600.0 Fgjdpfx Apedzp S Rewjf High-pressure unit + hydraulic spreader Year of manufacture 1988 / 1986 Hydraulic power unit, Type E45 / 59600.0 Operating pressure max. 630 bar Flow rate approx. 2 l/min Tank capacity approx. 10 liters Spreader – jaws, WEBER Type SP30 / 59 198.0 Outreach = arm length 340 mm Spreading distance max. 610 mm Spreading force in the working area max. 132 kN Closing force 99 kN - Double hose with plug-in connection Rated power 0.9 kW Mains connection 220 volts, 50 Hz Weight of hydraulic power unit approx. 40 kg Weight of spreader approx. 25 kg Very good condition Hydraulic fire and rescue set with hydraulic power unit and a spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart. It can also be used to compress or lift loads. Versatile due to the multifunctional spreader jaws made of die-forged and hardened steel.

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Fgjdpjxf Up Usfx Apwjf Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Fgedpfx Apoyx Dwkowof Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: excellent (used), functionality: fully functional, Skinner / Derinding / Derinding machine Weber type ASB 400 for manual operation with work table & fully automatic operation with feed belt, completely stainless steel. Like new!!! Fgodpoyzb Hzjfx Apwsf

Condition: used, For inquiries regarding the vibratory plate compactor, Mr. Herden is available to assist you by phone. Weber CR 6 WSA Hatz Diesel Vibratory Plate / Electric Start / Brand New / In Stock & Immediately Available Sales Price: €8,990.00 net / €10,698.10 gross 3-Year Manufacturer Warranty Technical Data Fgodpfx Asykhu Nspwof Engine: Hatz Diesel Max. engine output: 7.9 kW (10.7 HP) Weight: 428 kg Centrifugal force: 55 kN Frequency: 72 Hz Working width: 59 cm Weber Smart Assist (WSA) - Evaluates signals from the sensors installed in the machine and displays them graphically using symbols - Similar to the previous engine protection from Weber MT, the engine shuts off whenever engine damage would be expected if operation continued - The user is also shown via symbols how to resolve any indicated faults - For a heavily soiled air filter, the cleaning and replacement procedure for the filter element is explained step by step - Weber Smart Assist also includes the COMPATROL compaction control, now presented with a new design - It provides the user with an easy-to-read and clearly understood bar graph display of the compaction progress - The machine operation is also new: once started, vibration is activated at the push of a button - There is no throttle lever, as the engine automatically adjusts to the correct speed The reversible soil compactors of the CR series stand out for their high compaction performance and top efficiency. They are the first choice for compaction work in classic road and civil engineering applications as well as paving. Balanced running properties, high smoothness, and low hand-arm vibrations ensure high operating comfort. CR 6 – Economical machine with strong compaction performance: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle cable and hydraulic direction change are routed protected inside the guide bar - Low hand-arm vibrations - Fatigue-free operation with the height-adjustable guide handle - Protection for machine and engine through the engine guard frame and engine cover - Reduced maintenance effort thanks to the self-tensioning centrifugal clutch - Easy servicing, as all maintenance points are easily accessible - Safe and fast loading thanks to the large, foldable lifting eye - Secure lashing for transport with additional lashing eyes on the engine console - Enhanced operator convenience with electric start - Areas of application: road and civil engineering, paving, and thanks to its low height and working width, the CR 6 is also ideal for trench shoring We have a very large selection of different vibratory plates in stock and immediately available! Mr. Herden is happy to assist you by phone. On request, we can also provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, For questions regarding the vibratory plate, Mr. Herden (Tel. ...) will be happy to assist you. Weber CR 7 WSA Hatz Diesel Vibratory Plate / Electric Start / New machine / in stock & immediately available Sales price: €9,390.00 net / €11,174.10 gross 3-year manufacturer's warranty Technical Data Engine: Hatz Diesel Maximum engine output: 7.9 (10.7) kW/HP Weight: 484 kg Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm Weber Smart Assist (WSA) - Processes signals from the machine’s built-in sensors and visualizes them using graphic symbols - Similar to the previous Weber MT engine protection, the engine automatically shuts down if operation would lead to potential engine damage - The user is also shown, via symbols, how to remedy any displayed issues - In the case of an overly dirty air filter, step-by-step instructions guide cleaning and replacement of the filter element - The Weber Smart Assist also includes the COMPATROL compaction control, now presented in a new design - Compaction progress is indicated to the user in a clear, easy-to-read bar graph - The machines now feature push-button activation for vibration once the engine has started - No need for a throttle lever, as the engine self-regulates to the correct speed automatically Fodpfx Asykhvaspwogf The reversible soil compactors of the CR series excel with powerful compaction performance and maximum efficiency. They are therefore the first choice for compaction tasks in classical road and civil engineering as well as paving applications. Balanced running characteristics, high operating smoothness, and low hand-arm vibration ensure excellent operator comfort. CR 7 – Economical machine with strong compaction performance: - Infinitely variable forward and reverse travel, hydraulic shift - Throttle cable and hydraulic switch protected within the guiding bar - Low hand-arm vibration - Fatigue-free operation with height-adjustable guide handle - Machine and engine protection via engine guard frame and engine cover - Reduced maintenance thanks to the self-tensioning centrifugal clutch - Easy servicing, as all maintenance points are easily accessible - Safe and quick transport with extra-large, foldable lifting eye - Secure lashing for transport with additional lashing points on the engine console - Greater operator comfort with electric start - Applications: road construction, civil engineering, paving, and—thanks to the low overall height and working width—also optimal for trench shoring applications We have a very large selection of various vibratory plates in stock for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. We are happy to provide a financing offer upon request. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone). Weber CR 9 WSA Hatz Diesel Vibratory Plate Compactor / Electric Start / New unit / In stock & immediately available Sales price: €12,290.00 net / €14,625.10 gross 3-year manufacturer warranty Technical specifications Engine: Hatz Diesel Max. engine power: 10.5 (14.3) kW/hp Weight: 743 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm Weber Smart Assist (WSA) - Analyzes signals from the machine’s integrated sensors and displays them graphically using symbols - Similar to the previous Weber MT engine protection, the engine automatically shuts down if continued operation would risk engine damage - Error symbols guide the operator step-by-step in troubleshooting Fjdpfx Asyi Rzpepwogf - For an excessively dirty air filter, the cleaning and replacement process is shown step-by-step - Weber Smart Assist also includes the COMPATROL compaction control system, now in a new design - Displays compaction progress on an easy-to-read bar graph - New machine operation: after starting, vibration is activated at the push of a button - There is no throttle lever, as the engine speed is regulated automatically The reversible soil compactors of the CR series impress with strong compaction performance and maximum efficiency. They are first choice for classic road and civil engineering as well as paving applications. Well-balanced running characteristics, high stability, and low hand-arm vibration ensure outstanding operator comfort. CR 9 – Efficient machine with powerful compaction performance: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle cable and hydraulic changeover are safely routed inside the guide bar - Low hand-arm vibration - Fatigue-free operation thanks to height-adjustable guide handle - Protection of machine and engine by engine protection frame and motor cover - Reduced maintenance due to self-tensioning centrifugal clutch - Easy servicing, with all maintenance components readily accessible - Safe and fast loading thanks to large, foldable lifting eye - Secure lashing during transport thanks to additional lashing points on the engine console - Greater operator convenience via electric start - Application areas: road and civil engineering, paving, and—thanks to the low overall height and working width—the CR 9 is also ideal for trench shoring We have a large selection of various vibratory plates in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. We will gladly provide you with a financing offer upon request. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Year of construction: 2018, condition: like new (used), Weber screwing system: - Screw bunker with orientation and feeding system - dosing system - pneumatic feeding system - screwing gun - festo pneumatic gun travel operation system - frequency regulator 4 complete, barely used, systems for sale. Price is per set / negotiable. Screwing gun heads can be changed and adapted for multiple different types of screws. Contact for more information. Fedpfx Apeif Rvaewjgf

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm B-axis (table) 360.000 x 0,001° deg milling-head swivable +/- (HV) 360.000° deg pallet size: 1000 x 800 mm table load 3000 kg tool taper SK 50-B Plananlage 125 spindle turning speed range max. 8000 U/min transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min max. torque on the spindle 1410/2000 (100/40 % ED) Nm total power requirement 100 kVA dimensions of the machine ca. 11555 x 7998 x 5050 mm Additional information Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Fgodpfjzrnchex Apwsf Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 110-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices.

Condition: as good as new (ex-display), All parts from picture come with machine. Fgedpfxjgrafke Apwof