Used Eccentric Chuck for sale (4,700)

Year of construction: 2013, condition: excellent (used), 1. SCOPE OF SERVICES - EBU H 12 FT Eccentric press - Siegfried SPC control unit 2. DOCUMENTATION - Complete operating documentation available 3. TECHNICAL DATA Year of construction: 2013 Type: Eccentric press Rjdpfx Abefrzlmotech Nominal force: 120 kN Max. mould installation height: 170 mm Max. weight of upper mould part: 25 kg stroke adjustment range: 30 mm ram height adjustment: 40 mm Stroke rates: 40-200 1/min Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1200 kg

Year of construction: 1966, condition: good (used), A used eccentric press Weingarten in good condition with pneumatic engagement, piece counter, documentation, press test book, spare parts 2 pallets pressure 1500 kN (150 tons) stroke 60 mm ram small / large stroke 10 - 140 mm throat 550 mm Cylindrical holder 30 mm Table W x D 1200 x 1000 mm dimensions W x D x H 150 x 270 x 290 cm Weight 13.500 kg Rodoir I Sljpfx Abtsch Tech. Data and dimensions: Errors excepted.

Condition: good (used), functionality: fully functional, used (as new) Rcodpoxndaujfx Abtjh 3-jaw chuck RÖHM D = 160 mm Mount MK 4 and 3-jaw chuck FORKARDT D = 160 mm Mount MK 5

Condition: excellent (used), Diameter: 250 mm Bore: 75 mm Rcsdexlg I Nopfx Abtoh Height: 80 mm Overall height incl. mounting plate: 120 mm Weight: 40 kg

Condition: used, Workshop-refurbished Single-Column Eccentric Press WEINGARTEN Type AV 40 Machine No. 121826 D, Year of manufacture 1976 – Completely overhauled in 2003 Pressing force: 40 tons Throat depth: 225 mm Table opening: Ø 200 mm with support rim Ø 225 mm Table dimensions: 560 x 470 mm Ram area: 260 x 200 mm Adjustable ram stroke: 8–88 mm Ram adjustment: 63 mm Max. install height: 500 mm Clamping shank bore: Ø 40 mm Strokes per minute: 40–120 Motor power: 4 kW Power supply: 400 Volt, 50 Hz Table height above floor: 700–950 mm - Table height adjustment with 2 support spindles - Drop-through hole in table as round table opening with reduction ring from Ø 225 to Ø 100 mm - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC run-through protection - Stroke release via electric footswitch or two-hand control console - Front crankshaft support bearing - Overload protection via shear plate Rjdsxlkq Ijpfx Abtsch - Manual central lubrication - Electrical cabinet with dual-circuit contactor control from 2003, permanently mounted on the machine - Safety standard (UVV) for manual loading/unloading The machine is equipped with the following operating modes: - Setup - Single stroke (two-hand) - Single stroke (foot) - Continuous run (foot) - Automatic continuous run - External engagement Required space (L x W x H): 1900 x 950 x 2600 mm Weight: 3.1 tons Very good condition

Condition: like new (used), functionality: fully functional, Kitagawa B-210 3-jaw chuck as new Shipping by parcel service is possible if costs are covered. Rcjdpoxl Dmvefx Abtoh

Condition: used, Year of construction: 1981, total height: 2,300 mm, total width: 1,100 mm, total length: 2,000 mm, Empty weight: 500 kg Price: On request - Year: 1981 - Documentation available: No - Table width: 505mm - Throat depth: 250mm - Table length: 710mm - Ram width: 280mm - Ram length: 450mm - Power: 63.0ton - Transport dimensions: 2000mm x 1100mm x 2300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information Rcodpfjxhcgysx Abtsh VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), 1 permanent - magnetic Chuck D = 315 mm with mounting flange DIN 55027 Gr. 6 Rjdsd Eaauspfx Abtjch

Condition: reconditioned (used), Year of construction: 2008, Nominal Press Force: 800 kN Rjdpfxjw Ec A Ej Abtjch Ram Stroke, adjustable in steps: 30...120 mm Ram Adjustment: 100 mm Throat Depth: 300 mm Stroke Rate at Idle: 70 / min Continuously Adjustable Stroke Rate: 40 - 130 /min Die Height at Maximum Stroke (bottom) and Adjustment (top): 400 mm* Table Clamping Surface (W x D): 1,200 x 600 mm Ram Clamping Surface (W x D): 600 x 450 mm Ram Bore (pin bore): 50 H7 mm Main Motor Power: 7.5 kW Approx. Machine Height: 3,250 mm Machine Weight: 7,500 kg - With hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, latest UVV (accident prevention regulations) - With Siemens S7/300 control, touch operation on movable operator panel - Two-hand operation, stroke gate protected by limit switches - Centering groove - Roller feed: Servo 300 (strip width 300 mm, strip thickness: 4 mm, cross-section: 1000 mm²) - Roll block strips - Anti-vibration feet

Condition: used, diameter 315 mm bore diameter 91 mm turning speeds 4000 U/min spindle nose A 8 weight of the machine ca. 72 kg Like new 2 Jaw power chucks, Rcjdpfjuzmlzex Abtsh - Quick change system - 1 set ground jaws

Condition: used, Year of construction: 1962, functionality: fully functional, machine/vehicle number: 603.015.16, overall weight: 134 kg, DGUV certified until: 02/2024, Eccentric press BMW T.P.3, year 1962, power 0.40 kW Redpfexqxr Rsx Abtoch

Condition: ready for operation (used), Eccentric Press Machine, AUG. RUHRMANN E100R, Used Machine Manufacturer: AUG. RUHRMANN Maschinenfabrik GmbH & Co. KG Type: E100R Serial Number: 14339 Year of Manufacture: 1997 Technical Data Nominal pressing force: 1000 kN (100 tons) Stroke length: 20 – 130 mm Max. installation height (at bottom dead center): 580 mm Stroke adjustment: max. 100 mm Max. flywheel speed: 230 1/min Number of strokes in continuous operation: 60 1/min Max. clutch engagements: 16 1/min Standard crankshaft stop point: 15° after B.D.C. Max. tool size: 580 × 380 mm Max. tool part weight: 70 kg Operating pressure of clutch system: 6 bar Compressed air connection: 6 – 8 bar Total drive power: 7.5 kW Safety distance: 345 mm Overrun time: 215 ms Table size: 1100 × 660 mm Operating hours: 70,797 Overall dimensions Redpfsxnqrdjx Abtoch Width: 2000 mm Depth: 1700 mm Height: 3020 mm Weight (without tools and accessories): 7000 kg

Condition: used, Year of construction: 1978, machine/vehicle number: 4788, Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Rjdpfx Asw Tukiebtech Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton

Condition: used, diameter 250 mm Rcedpfx Aet Nzfqebtjh

Condition: excellent (used), Year of construction: 2003, Manufacturer: ROVETTA Rcsdpfxsxlh Rfe Abtsh Year: 2003 Condition: Used Stock number: 0385 Pressing force: 630 tons Number of connecting rods: 4 Slide stroke: 300 mm Slide adjustment: 250 mm Die clearance at BDC: 950 mm Strokes per minute: 15/65 Maximum front opening: 5,200 mm Table dimensions: 5,000 x 2,630 mm Slide dimensions: 5,000 x 2,630 mm Main motor power: 132 kW

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 300 kg, Welding rotary table KT 600, with 100mm through hole Load horizontally 600 KG, tilted 300 KG Power consumption AC 380V, 50 Hz Rotary motor AC 400W Table diameter 650mm Height 700mm, width 800mm, length 800mm Weight 155 KG Infinitely variable electric tilt range 0 – 90° Speed 0.2 – 1.9 rpm Rcodpfx Absvu Dpyjtjh Welding current transmission max. 500 A Incl. hand remote control and foot remote control Surcharge: Quick-release jaw chuck Diameter 500mm, €750 CE mark/approval

Condition: new, NEW & unused Overview / list of available types (see pictures) multiple units available Price: per piece Rcedep T N Tqepfx Abtoh

Condition: good (used), Eccentric press Stroke: 55 mm Ram adjustment: 8 – 96 mm Turn: 50 1/min Max force: 45 t Weight: 2550 kg Rcsdpfx Aog Uf D Hebteh

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Rsdpfx Asuqdwxebtech Required power: 15 kW Weight of machine approx.: 12 ton Standard configuration Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: good (used), Year of construction: 1999, functionality: fully functional, NILES DFS4 CNC Rcodpfxsxn Ul Ue Abteh 1999 NUMERICAL CONTROL CONFORMITY CHECK OK 12/2023 3 CHUCKS PROVIDED CHIP CONVEYOR LOADING ONTO TRUCK POSSIBLE NOVEMBER 2025

Condition: used, Jaw chuck different versions from 300mm to 500mm Rsdpfjb I Sdxex Abtech

Condition: used, Year of construction: 1971, machine/vehicle number: 7130, Capacity: 60 ton Throat depth: 275 mm Rodjuqcxnspfx Abtsch Ram stroke: 5 -100 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 740 x 470 mm Number of strokes: 14 - 100 s.p.m. Required power: 10 kW Dimensions L x W x H: 2.300 x 1.500 x 3.000 mm Weight of machine approx.: 3,5 ton

Condition: used, Year of construction: 1979, machine/vehicle number: 4941, Capacity: 75 ton Throat depth: 300 mm Ram stroke: 8 - 100 mm Slide adjustment: 60 mm Shut height (stroke down, adjustment up): 390 mm Table surface area : 700 x 600 mm Slide area: 400 x 270 mm Number of strokes: 120 s.p.m. Required power: 4 kW Dimensions L x W x H: mm Weight of machine approx.: 3,5 ton Redpfx Abew Tukvetech Extended machine accessories Dreher roller feed model WAV-MD-2Z /1060 K-AMaterial width 210 mmMaterial thickness max. 1.5 mmMax. feeding speed 80 m/min.

Condition: used, Year of construction: 1970, Press capacity: 30 ton Throat depth: 160 Ram stroke adjustable: 20 - 45 mm Rcjdsuqc Enspfx Abtoh Slide adjustment: 10 / 60 mm Shut height (stroke down, adjustment up): 220 mm Table surface area : 470 x 300 mm Slide area: 250 x 190 mm Number of strokes: 80 - 240 s.p.m. Required power: 4 kW Dimensions L x W x H: 1.400 x 1.800 x 2.000 mm Weight of machine approx.: 2,67 ton Standard configuration the electric is new from 2015.

Condition: used, Year of construction: 1983, machine/vehicle number: 5154, Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton Standard configuration Extended machine accessories Rjdpfxouqc Hfe Abtsch Press body can be tilt