Used Edge Control for sale (45,374)

Condition: ready for operation (used), Fanuc A06B-2218-B000 AC servomotor, serial no.: C226F1A4A, with pulsecoder A860-2050-T321 Godpfxex Nlt Us Ag Tobg

Condition: used, Year of construction: 2016, Working hours machine: 5320 h max. working width: 300 mm workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Gbjdpev N I Hlefx Ag Teg Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg Standard configuration - With a magnetic table designed for part dimensions of 25 x 25 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- With vacuum table for part dimensions of 45 x 45 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- Time consuming turn-over of parts with a second pass is not necessary- Swinging away of the innovative turning station makes it possible to deburr parts longer than 200 mm- A higher level of automation ensures an economic and reliable deburring process, also for large quantities of parts- A high and sustainable deburring quality.- Dry deburring process (no chemical additives as used in tumblers)- Small parts are returned to the front of the machine and gathered in a box. No extra walking back and forth for the operator.- Energy-efficient- The deburring process ensures an even wear of the belt and brushes across the entire width of the machine- Fast and simple tool Change- Simple and intuitive operation of the machine- Modern, compact machine design Extended machine accessories

Condition: used, Hebrock AKV 3005 edge bander, well-equipped, can be tested before purchase, Liquids before milling units, Pre-milling cutters, Glue application with roller, equipped with glue drain, Second glue pot included, pneumatic pre-cut guillotine, pressure rollers, final trim saw, milling unit top/bottom, R1 – R2 pneumatically adjustable, profile scraper, corner rounding unit, liquids before scraper, Gjdpsw I Sp Sefx Ag Tebg flat scraper, polisher, max edge tape thickness in roll: 3mm, max edge thickness for lipping: 12mm, machine in very good condition.

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Gedpfx Agoxy Tm Is Tjbg

Condition: as good as new (ex-display), Heidenhain ULS 300/0020 Gsdpfx Agsr Ar Ddo Tebg (28468) Length scale : 270 mm ID.NO.239 740-02 serial number 10 298 353 B A3 unused, in opened original packaging

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Condition: Completely overhauled, excellent! Feed speed: infinitely variable, 10-18 m/min Control unit: edge control 19 with 18.5" color touchscreen display Jointing milling unit 1802 Edge feeder 1901 Glue application station Cartridge 1906MG, with tracking nozzle and automatic glue height adjustment Pressure unit 1913, pneumatic End trimming unit 1918 Multifunction milling unit 1826 MOT 6 with 6 servo axes for flush, radius, and bevel milling Copy milling unit 1983 Radius scraper unit 1929 with pneumatic adjustment (retrofitted; see photo) Flat scraper 1964 Gjdew I Uhqspfx Ag Tjbg Workpiece thickness: 6 - 60 mm Edge thickness: 0.4 - 8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Total length: 5195 mm Extraction connection: 180 + 80 mm, 2100 m³/h Compressed air connection: 6 bar / 327 NL/min Weight: approx. 2200 kg Availability: approx. 2-3 weeks after order confirmation Location: Flörsheim

Condition: ready for operation (used), Fanuc A06B-0063-B303 AC servomotor SN: C228F35DE with Pulsecoder 860-2020-T301 Gedpfx Agjx Nlrwe Tsbg

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2025, total height: 220 mm, total length: 825 mm, total width: 575 mm, type of input current: AC, control voltage: 220 V, Tempering Unit Jufeba Tabletop model: TG 2-2 T Containers approx. 2 x 20 litres Stainless steel construction Dry heating Simple temperature control TOP technology Connection 230V, ready to plug in Dimensions: 575 x 825 x 220 mm (W x D x H) Used unit, cleaned & function-tested Many more tempering units in stock! Gbodpfjt U Uxusx Ag Tjg

Condition: excellent (used), Felder G360 Edge Bander, Pre-milling cutters, Glue application by roller, Pneumatic pre-cut guillotine, Pressure rollers, Finishing saws, Top and bottom milling unit R1 – R2, Profile scraper, Polishing unit Edge thickness: 0.4–3 mm, Max. panel height: 45 mm, Feed speed: 7 m/min, Gbjdpfx Asxy Iwbog Tsg Total power requirement: 2.8 kW, Machine length with table: 290 cm, without: 240 cm.

Year of construction: 1992, condition: good (used), Compressors, control, compressor control, control panel -Handover: in its current condition as inspected -Cover bottom: damaged, see photo -Manufacturer: Ecoair Gbsdpfx Ajf Dq Uiog Tog -Type: Multitronic Control -Dimensions: 280/295/H120 mm -Weight: 2.6 kg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0656-000, space requirement length: 7,000 mm, space requirement width: 5,000 mm, space requirement height: 5,000 mm, overall weight: 8,000 kg, total height: 5,000 mm, total width: 5,000 mm, total length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet length: 1,200 mm, control cabinet width: 400 mm, type of input current: three-phase, input voltage: 380 V, power: 30 kW (40.79 HP), 6 stainless steel silos, of which 3 silos are equipped with internal mixers. Capacity per silo approx. 6 m³. Additionally, there is a big bag filling station with dust extraction included. Control cabinet including weighing hopper for batch preparation. Gbodpox R Sr Hofx Ag Tog

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Godpfsxfh Tmex Ag Tsbg Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: ready for operation (used), Fanuc A06B-0213-B100 servomotor without nameplate with pulsecoder A860-360-T001 Gbjdex Nlr Dopfx Ag Tsg

Condition: used, mileage: 42,900 km, power: 103 kW (140.04 HP), first registration: 06/2023, fuel type: diesel, overall weight: 3,300 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: - Passenger airbag - City package - Driver assistance system: Emergency braking assist - Rear door (opening angle 270 degrees) - Spare wheel (full-sized) - USB port - Half-height lining in load/passenger compartment City Package: - Electrically adjustable, heated and foldable exterior mirrors - Electrically adjustable exterior mirror, right side - Electrically adjustable and heated exterior mirrors - Audio system: Radio with integrated CD player (MP3 compatible), integrated display - Steering wheel radio remote control - Bluetooth hands-free system - Electronic parking assistance - Video parking system Additional equipment: - Driver airbag - Exterior mirrors with wide-angle - Integrated indicator lights in colored exterior mirrors - Brake assist - Body/build: Large-capacity standard panel van - Padded headrests - Fuel tank: 90 L - Load compartment partition - Height-adjustable steering column (steering wheel) - Engine: 2.2 L - 103 kW Blue-HDI FAP catalytic converter (2179 cc) - Wheelbase: 4,035 mm - Low emissions according to Euro 6d standard - Sliding door, right side, for load/passenger compartment Gbodpsx Sbiwsfx Ag Teg - SCR system (AdBlue technology) - Side protection strips - Seat cover/upholstery: fabric - Seats in cab: Double passenger seat - Seats in cab: Driver’s seat with lumbar support - Start/stop system - Power socket in load/passenger compartment - Permissible total weight: 3.30 t - Trade-in possible - Financing & leasing available through our partner banks - Warranty available up to 48 months (vehicle age-dependent) - Errors, alterations, and prior sale reserved

Condition: excellent (used), Edge bander Holzher Streamer 1057 Pre-milling units Glue application, GLUE JET cartridge glue system Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Pressure rollers Final trimming saws, angle adjustable Top and bottom milling units R1, R2 Corner rounding unit Profile scraper Flat scraper Gbjdoxf H Rdopfx Ag Teg Max edge banding height: 45 mm Max edge thickness in roll: 3 mm Machine length: 460 cm Feed speed: 10 m/min

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 0-600-44-2301, HOMAG - Profi KAL310/7/A3 Comprising: - Feeding table Profi TBL100/20/06 (HOMAG, year 2014) - Profile KAL310/7/A3 (HOMAG, year 2014) The KAL is suitable for processing coated wood-based materials: Gbedpfjqi Hqiox Ag Teg - With melamine edges 0.3-0.4 mm - With ABS and PP edges 1.0-2.0 mm (tools available: R 1.0, 1.5, 2.0) The machine is additionally equipped with a grooving unit for vertical and horizontal grooving and rebating. If interested, the complete order confirmation can be provided. The machine must be dismantled and loaded by the purchaser.

Condition: new, functionality: fully functional, table length: 950 mm, table width: 450 mm, input voltage: 400 V, oscillation stroke: 15 mm, grinding belt length: 2,640 mm, grinding belt width: 150 mm, power: 2.2 kW (2.99 HP), grinding belt speed: 14 mm/s, input frequency: 50 Hz, Sanding unit can be pivoted using a hand crank. The welded steel machine stand guarantees high torsional rigidity and vibration-free operation. Gedpfx Ajwg Ddajg Tsbg Oscillating sanding belt with separate gear motor for better sanding results. Oscillation can be optionally activated. Sanding base with graphite coating for a longer sanding belt service life. Height-adjustable sanding table utilizes the entire sanding belt width. Additional table with extraction openings for sanding radii on the rubberized guide roller. Sanding sleeve device with attachable work table. The spring-loaded belt tension automatically compensates for belt length differences. With adjustable stops, it is ideal for veneer sanding. Dimensions and Weights Length (product) approx. 1700 mm Width/Depth (product) approx. 1000 mm Height (product) approx. 1150 mm Net Weight approx. 300 kg Extraction Connection Number of Extraction Outlets 2 Extraction nozzle diameter 100mm Worktable(s) Worktable length 950mm Worktable width 450mm Worktable height adjustment 110mm Electrical Data Supply voltage 400V Mains frequency 50Hz Oscillation motor power 0.11kW Sanding unit: Sanding belt length 2640mm Sanding belt width 150mm Belt speed(s) 14m/s Oscillation stroke 15mm Sanding surface length 800mm Sanding surface width 150mm Sanding unit tilt 0-45° If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply specialist machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop technology. Contact us and we will tell you the nearest dealer.

Condition: ready for operation (used), Fanuc A06B-2218-B000 AC servomotor SN: C301F26F4 with pulse coder A860-2050-T321 Gbedsx Nlufopfx Ag Teg

Condition: used, BRANDT highflex 1440 edge bander well equipped, Initial milling cutters glue application pneumatic preliminary guillotine pressure rollers finished cutting saws top-bottom milling unit 2 x finishing unit profile scraper flat scraper Godpfxsv H D S Se Ag Tobg polisher the machine has nc milling cutter control and a pneumatic package max. element height 60mm max. veneer thickness in a roll 3mm max. feed 14m/min the machine is functional, can be tested before purchase

Condition: new, feed rate X-axis: 7 m/min, workpiece height (max.): 50 mm, type of input current: three-phase, input voltage: 400 V, With corner copying, suitable for plastic edges from 0.4 - 3 mm, solid wood edges up to 3 mm, and workpieces from 8 - 50 mm, with pneumatic adjustment. Panel thickness: 8 – 50 mm Edge thickness: 0.4-3 mm (coil material) Jointing unit: Yes Radius milling unit: Yes Corner copying unit: Yes Scraper: Yes Buffing unit: Yes Premium equipment for high productivity with minimal space requirements! Intuitive operation with eye-S control and 10" large touchscreen: HMI Maestro Active Edge; graphical representation of all processing units and their operating status; graphical simulation of operations; control of all processing units; regulation of glue pot temperature; assistant functions for machine setup according to the processing program; error diagnosis for quick resolution of simple faults; statistics on processing parameters; USB connection; network connectivity ready; prepared for Industry 4.0 with API REST data transfer protocol. Outstanding accessibility to work units thanks to the large hood, which also provides protection and noise reduction Monoblock steel construction ensures high stability and rigidity of the machine Automatic unit positioning when changing panel thickness Cut-off saw unit with corner rounding (me 35 tr s): for trimming the edge and rounding corners on the top and bottom; for edging solid wood, trimming is done with the radius milling cutter; high-frequency motor with 12,000 rpm; saw blade Ø125mm Z12 Panel feed via feed chain with rubber sliding shoes Extendable workpiece support Adjustment of infeed fence via spacer plates Dimensions and Weights Length (product) approx. 3314mm Width/depth (product) approx. 1085mm Height (product) approx. 1300mm Weight (net) approx. 623kg Flush radius milling unit Rated output: 2 x 0.35kW Cutter diameter: HW55.3mm Spindle speed: 12000min⁻¹ Extraction port diameter: 60mm Number of extraction ports: 2 Corner copying unit Rated output: 0.35kW Tool diameter: 58mm Speed: 12000min⁻¹ Electrical data Connection voltage: 400V Mains frequency: 50Hz Glue unit Glue pot rated output: 0.25kW Glue pot operating temperature: 190°C Glue pot extraction port diameter: 60mm Glue pot capacity: 0.8kg Pneumatic connection Operating pressure: 6.5bar Air consumption: 470l/min Gsdpfoxxvansx Ag Tjbg Feed Feed rated output: 0.55kW Feed speed: 7m/min Edges Edge thickness (coil material): 0.4 – 3.0mm Pre-milling unit Extraction port diameter: 2 x 80mm Rated output: 3kW Cutter speed: 7200min⁻¹ Diamond cutter diameter: 80mm Cutter height: 56mm Material removal: 0.5 / 1 / 1.5 / 2mm Scraper units Radius scraper: 2mm Buffing unit Rated output: 2 x 0.14kW Speed: 2800min⁻¹ Workpiece Workpiece thickness: 8 – 50mm Minimum workpiece length: 120mm Minimum workpiece width: 110mm

Condition: ready for operation (used), Fanuc A06B-0215-B700 # 0100 AC servomotor SN: C105F0F34 with Pulsecoder A860 Gbodpfjx Nlr Rjx Ag Tsg

Condition: new, total length: 1,700 mm, total width: 1,000 mm, total height: 1,500 mm, table length: 900 mm, table width: 360 mm, input voltage: 400 V, grinding belt length: 2,580 mm, grinding belt width: 150 mm, power: 2.2 kW (2.99 HP), grinding belt speed: 14 mm/s, input frequency: 50 Hz, • Sanding unit can be swiveled using a handwheel • The welded steel machine base guarantees high torsional rigidity and vibration-free operation • Oscillating sanding belt with separate gear motor for better sanding results • Oscillation can be optionally activated • Sanding sole with graphite coating for a longer sanding belt service life • Height-adjustable sanding table utilizes the entire sanding belt width • Additional table with extraction openings for sanding radii on the rubberized guide roller • Sanding sleeve device with attachable work table • The spring-loaded belt tension automatically compensates for belt length differences Technical specifications: Dimensions and weights - Length (product) approx. 1700 mm - Width/depth (product) approx. 1000 mm - Height (product) approx. 1150 mm - Weight (net) approx. 250 kg Extraction connection: - Number of extraction nozzles: 2 - Extractor nozzle diameter 100mm Worktable: - Worktable length 900mm - Worktable width 360mm - Worktable height adjustment 110mm Electrical data: - Supply voltage 400V - Mains frequency 50Hz - Oscillation motor power - Sanding unit power 0.11kW - Sanding belt length 2580mm - Sanding belt width 150mm - Belt rotation speed(s) 14m/s Godpswg Dy Iofx Ag Tsbg - Oscillation stroke 15mm - Sanding surface length 800mm - Sanding surface width 150mm - Sanding height max. 150mm - Sanding unit pivoting 0 – 90° Scope of delivery • 1x Sanding belt K100 • 5x Rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x Sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Onboard tool kit • Miter gauge If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop equipment. Contact us and we will tell you the nearest dealer.

Condition: ready for operation (used), Fanuc A06B-0373-B075 AC servomotor SN: C018F3297 with pulse coder A860-0360-T001 Gbodpex Nltzjfx Ag Teg

Condition: ready for operation (used), Fanuc A06B-0146-B077 AC servo motor Serial number: C988A7708 / 3.0 kW 100 Hz Speed 1500 rpm, used, in good condition, 100% functional, scope of delivery as per photos. Gbedpfx Aex Ncaleg Tog

Condition: ready for operation (used), Fanuc A06B-0146-B077 AC servo motor, serial number: C985A6505 / 3.0 kW 100 Hz, 1500 rpm, used, in good condition, 100% functional, scope of delivery as per photos. Gbjdpfx Agsx Ncafo Teg