Used Edge Trimmer for sale (4,095)

Year of construction: 2021, operating hours: 8,000 h, condition: excellent (used), Real occasion due to automization of the workshop: Edilux 10+6 from 2021 for straight edges from 10 to 100mm thickness with: 10 frontal polishing spindles 3 upper bevelling spindles 3 lower bevelling spindles Dodpfx Ajyrr Uvon Iowd automatic lubrication 2 roller tables of 2mt. each Very good condition

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Dwjdpfx Anjz A Tx To Ijd Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: excellent (used), Finscan Nova and a CGV full trimmer Djdewq A Edjpfx An Iewd

Condition: used, Edge sanding machine Holzmann KOS2510, good condition, standard equipment, 2510 mm belt length, 150 kg Price changes reserved, errors, printing and typographical mistakes excepted. Dedpfxowzzf Rj An Iowd

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KCS 71.14-2 D -Power: 4.4 kW 2820 rpm -Voltage: 400 V / 50 Hz -Mounting shaft: Ø 30 x 40 mm / M30 x 3,5 -Number: 2x motor available -Price: per piece -Dimensions: 515/230/H150 mm Dwedpfx Answ Av Nao Isd -Weight: 37 kg/piece

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Dsdpfx Ajttakhjn Iewd Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Ott Atlantic V6 edge banding machine capping, 2 x milling, radius scraper, cleaning disks Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Condition very little used year of construction 1999 Dodpfx Asr Elhvon Iowd price 5500.-

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BIESSE Edge Stream B1 features a comprehensive set of tools including a PU-gluing machine, pre-milling unit, edge trimmer, and fine milling unit. It also includes rounding and edge scraper units, along with swaying brushes and an edge heater. If you are looking to get high-quality edging capabilities, consider the BIESSE Edge Stream B1 machine we have for sale. Contact us for further details. • Liquid spray unit (ADZ) Djdozuhd Repfx An Iowd • Pre-milling unit (RT) • PU gluing unit (SP10, Nordson) • Edge trimmer (IT90) • Balance tool trimmer (RS10) • Fine milling unit (RF40) • Rounding unit (AR60) • Edge scraper (RB40) • Glue scraper unit (RC20) • Swaying brushes • Edge heater (PH10)

Condition: used, Year of construction: 2009, Edge banding machine Manufacturer: IMA Type: Novimat/I/G80/650/R3 Year of manufacture: 2009 Technical data - Workpiece overhang from the chain conveyor: 38 mm - Feed width: min. 65 mm (with max. workpiece thickness of 25 mm) - Workpiece length in feed direction: 150 mm - Overall height (top edge of chain conveyor): 960 mm - Feed speed: approx. 6 - 30 m/min, electrically adjustable - Machine control system ICOS open compact Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Workpiece thickness: 8 - 40 mm (with edge trimming function) / 60 mm (without edge trimming function) - Smallest workpiece: 150 x 150 mm or 65 x 300 mm - Edge material: paper, plastic and veneer - Height: 14 - 65 mm - Roller material thickness: 0.3 - 3.0 mm (veneer edges limited to max. 1.0 mm) - Max. upper edge overhang: 5 mm Units Infeed area - Release agent applicator mounted at the top and bottom, not adjustable Edge trimming - 2 motors 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - Motor 1 counter-rotating - Motor 2 co-rotating Gluing unit VTG 3-6 - with one preheating nozzle 300 mm for preheating the workpiece edge - 6-position edge magazine for roller material 0.3 - 3 mm thick. - 1 driven main pressure roller and 4 pressure rollers, with scraper, pneumatically adjustable Glue application - with pneumatic quick-lock system - Chem-Coat coating - electronic temperature control - Volume 0.8 l Pre-melting tank approx. 1 l - Heating power 3 x 400 W - with EVA glue, approx. 7.0 kg/h - with filler-free glue, approx. 5.0 kg/h Cutting unit - 2 motors 660 W, 200 Hz - incl. frequency inverter with braking function - pneumatic pivoting 0+25 for straight and bevel cutting Flush trimming - 2 motors each 1000 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function Multi-profile trimming unit - 2 motors each 660 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function - for trimming 4 profiles Dedpfx Anszuyi Ee Iowd - with stepper motor axes for horizontal and vertical positioning Contour trimming unit KFA x30 - 1 motor 500 W, 400 V, 400 Hz, 18000 rpm - Program-controlled conversion for up to 4 profiles - incl. fine positioning for different edge thicknesses Multi-profile scraping blade - Stepper motor axes for horizontal and vertical positioning - Scanning from above and below (max. 4 profiles) - Scanning from the side via pneumatic pressure Spray nozzles at the top and bottom for applying cleaning agents - fixed, not adjustable Surface scraping blade - with height sensing skid - electronically controlled horizontal positioning Buffing unit - 2 lower and 2 upper motors, 180 W, 50 Hz, 1400 rpm - 1st motor pair with cloth-sisal discs 50x160x19 mm - 2nd motor pair with polishing discs 50x160x19 mm - The motors operate in the same direction and are both tilted and pivoted in the feed direction. - Each motor can be individually adjusted vertically 2x NC-controlled grooving - 2 milling motors each 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - one manual 90-degree pivoting device from 180 -270 with co- and counter-rotating function - Horizontal, stepless adjustment with AC servo motor for grooving unit Workpiece return Note: The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is non-binding.

Condition: used, Year of construction: 2012, Softforming edge banding machine with panel cutting device Manufacturer: Elwood Year of manufacture: 2012 Technical data: - Adhesive application system with slotted nozzle - Compatible with EVA and PUR adhesives - Meler adhesive melting and application system - Electronically controlled adhesive temperature and melting time - Panel thickness: 10-60 mm - 2 profiling milling units - IR heating lamps for material preheating - Spray device for release agent - Pressing zone with heated tower pads (can be replaced with pressing rollers) - Edge band magazine - Front and rear trimming units - Top and bottom flush trimming units for longitudinal edge overhang (2 at the top + 2 at the bottom) - Top and bottom polishing units - Computer control for quick, easy and precise adjustment of the machine's main functions and units Dodpfx Anezuyi Ss Iowd Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Dwjdszuyplepfx An Ijd Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2009, - Edge material thickness: 0.3 - 3.0 mm - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm Single-sided edge banding machine Manufacturer: IMA Type: Novimat Contour/I/G80/790/L20 Year of manufacture: 2009 Technical data - Electronically controlled feed speed: 6-30 m/min - Edge material thickness: 0.3 - 3.0 mm - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm - Maximum edge overhang from above: up to 8 mm edge thickness - 5 mm, over 8 mm - 2 mm Workpiece size: - Minimum workpiece length in the feed direction: 150 mm - Minimum workpiece width: 25 mm, thickness: 65 mm - Minimum workpiece thickness: 8 mm (without profile trimming blades) or 12 mm with profile trimming blades - Maximum workpiece thickness: without corner copying, max. 60 mm (max. 40 mm with corner copying) - Smallest element: 150 mm x 150 mm or 65 mm x 300 mm Note: *65 mm with a maximum piece thickness of 25 mm The edge banding machine is equipped with: Dsdpfozuyprox An Iewd - Hand-adjustable guide rail for inserting workpieces - Trimming units 08.376, 2 motors, each with 4.5 kW, spindle speed 9000 rpm, 150 Hz - Heating unit for warming the workpieces - Gluing unit with drive 283.1513, featuring a tightly sealed oil pan, drive arranged with glue pot content of 0.8 l and glue application height of 60 mm, with a pneumatic quick-clamping system for hot melt and PU adhesives, magazine for edge banding rollers and strips, edge banding roller diameter 800 mm - Glue pellet preheating unit with automatic feeding of glue pellets from a 30 kg container. - Automatic preheating unit for PU cartridges with a weight of approx. 2.5 kg and a capacity of 8-10 kg/h - Trimming unit 08.42/30/B, pneumatic adjustment of the saw blades from 0 - 25°, 2 motors 660 W, 200 Hz with frequency inverter and braking function - Pre-milling unit 08.055, swiveling up to max. 30° - Multi-chamfering unit 08.342, 2 motors, 660 W, 400 V, 200 Hz, 12000 1/min - Cleaning agent dispenser - Profile trimming blades 08.519 - Surface trimming blade 08.521 for removing excess glue from glue joints - Buffing unit 08.617-2, 2 motors with 180 kW, 50 Hz, 1400 rpm - Groove/milling unit with one motor Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1987, Edge grinding machine Manufacturer: Rehnen Type: R1 Year of manufacture: approx. 1987 Technical data Dwodpfezuzddjx An Ied Work table: 1100 x 500 mm Grinding belt: 2280 x 150 mm 3 kW main motor 6.4 Amps Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, Edge milling machine Manufacturer: Brandt Type: FTK 130 Year of manufacture: 2010 Dwedpfx Aszuzlhjn Ied Note: The technical data and descriptions are a transcript of the original order confirmation. The data is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, Painting system for edge surfaces Manufacturer: WIKOMA Painting of narrow edge surfaces Commissioned: 2021 Intended use: Spraying the edges of furniture panels arranged in stacks. Scope of delivery: - 2 spray booths - 2 hot air drying tunnels - 1 sanding booth - Chain conveyor - Control cabinet Dwedpfx Ajzuztxon Ijd The system was in operation until the end of June 2025. Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, 0,4-8 mm Djdpfxozu A R Se An Iewd Workingpiece thickness from to 8-60 mm Total length 4930 mm Feed speed 10 m/min. Weight 1500 kg

Condition: ready for operation (used), Assfalg ASO 650 S Edge Milling Machine, Chamfering Machine, Deburring Machine Maximum chamfer width: 0-7mm Djdpfezy E D Ssx An Iewd Angle adjustment: 15°-45° Dimensions: approx. 400 × 500 × 300 mm Weight: approx. 52 kg Radius [mm]: 1.2 | 2 | 2.5 | 3 | 4 | 6 You are welcome to visit us for an inspection. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2021, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 220247, total length: 18,000 mm, total width: 4,000 mm, total height: 3,000 mm, input frequency: 50 Hz, input voltage: 400 V, pressure: 7 bar, The HE 500 is a double-edging line – L-shaped – consisting of 2 grinding machines connected at an angle. The first machine is designed for processing wider sheets of glass, while the second is for narrower sheets. At the inlet of the second machine, there is a centering device that corrects the position of the glass. Technical specifications of HE500: Minimum working size – 400x200, Working thickness – 3 – 25, Oscillating spindle – 1+1, Dedpfezznuiox An Iswd Diamond spindles for grinding flat edges – 2+2 Diamond spindles for grinding bottom bevels – 1+1 Polishing spindles for bottom bevels – 1+1 Diamond spindles for grinding top bevels – 1+1 Polishing spindles for top bevels – 1+1 Polishing spindles for flat edges – 3+3 Spindles for rounding corners – 1+1 Engraving spindle – 2+2 Empty positions – 0 Total power of the XE line installation (kW) – 120 Conveyor belts, motorization: Belts driven by 4 brushless motors Mobile bridge movement Ball bearing guides, controlled by two brushless motors Summary: Bavelloni HE500L Double Edging Line – 1 set. TT5130 feeding table – 1 piece. Horizontal washing machine 2800 – 1 piece.

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 250 / 2500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 35 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Snipping Unit HL86 (2 x Kw 0,22) Rough Trimming Unit BF10 (2 x Kw 0,55) Fine Trimming Unit PF20 (2 x Kw 0,4) FRRE SPACE for Corner Rounding unit ( Contour Trimming) FF 12 (2 x Kw 0,4) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Dwedpfx Aszrd Rzsn Isd Spraying Unit (for polishing liquid)

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding belt length: 3,000 mm, grinding belt width: 150 mm, table height adjustment: 180 mm, input frequency: 50 Hz, Langzauner LZK 3/4 oscillating edge sanding machine, with veneer edge sanding attachment and feed console Sanding unit adjustable from 0-45° Dodpfx Aez D Auton Iswd Oscillation Miter stop Height-adjustable sanding table (180 mm) for utilizing the full width of the sanding belt Table size (front) 1000 x 350 mm Table size (side) 400 x 250 mm Connection power 4.6 kW Belt length 3000 mm Belt width 150 mm Belt speed 22 m/s Weight approx. 350 kg Space requirement 1770 x 730 mm Year of manufacture 1997 Condition: Functionality tested

Condition: used, Double end profiler, edge processing machine, scoring motor, hogger motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type DVMS 903/2 -Power: 0.4 kW 12000 rpm at 200 Hz Dwsdpfjmdygiex An Ied -Voltage: 133 volts -Recording shaft: Ø 30 x 32 mm -Tool: Ø 70 x 20 mm / insert milling cutter -Number: 1 piece available -Dimensions: 250/59/H140 mm -Weight: 3.8 kg

Condition: good (used), Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine with accessories Dwsdex Ea Ayjpfx An Ied -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 33.2 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KNS 21 05/2 with bracket -Power: 0.15/0.22 kW 11160/17250 rpm Dsdjvy Sryopfx An Iewd -Voltage: 133/200V / 200/300 Hz -Mounting shaft: Ø 15 x 15 mm -Saw blade. Ø 140 mm -Dimensions: 260/200/H200 mm -Weight: 4.5 kg.

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 4 kW 8760 rpm at 300 Hz -Shaft mounting: Ø 30mm -Dimensions: 390/160/H180 mm Dsdpfeb A Nl Nox An Ijwd -Weight: 25 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 3 kW 2880 rpm at 50 Hz Dwedpfx Aob A Nmasn Ijd -Motor: 4.4 kW 5820 rpm at 100 Hz -Shaft mounting: Ø 35 mm -Weight: 30 kg