Used Edge for sale (3,750)

Condition: used, Used machine Year of manufacture: 1988 Condition: well-maintained Equipment and technical specifications: - Length of worktables: 1,440 mm - Total width of two worktables: 710 mm Rjdpfx Asxzl Aqoa Isw - Worktable tilt adjustment: 0 – 30 degrees - Working pressure: 6 bar - Sanding belt length: 2,170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10 – 20 m/sec - Vertical adjustment of oscillation unit: 125 mm - Air consumption: 25 NL/min - Electrical: 400 V / 2.9 kW Weight: 490 kg Availability: short notice Storage location: 63934 Röllbach

Condition: used, functionality: fully functional, De Stefani MVT 1600 edge sanding machine Rsdpfx Aaezhlhgs Iew 2 sanding units Unit power: 2 x 1.8 kW Two sanding belt speeds Maximum workpiece height: 80 mm Self-sharpening sanding unit Manual adjustment of the sanding unit Manual adjustment of the unit angle Sanding units with oscillation Feed speed adjustable by means of a variator Feed motor power: 0.74 kW

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 123 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low-lift pallet truck Load center: 600 Fork width: 160 mm Fork thickness: 47 mm Transmission: Electromechanical Condition: New Rsdpfozfb Ecox Aa Iow Technical condition: New Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24V Battery capacity: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Description: - Pin code access - Discharge indicator and operating hour counter, - Lithium battery - Cushioned side support rollers D80x30 - Tandem load rollers D80x70 Impulse control, CE certificate, Non-marking tires, Lithium-ion technology

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 123 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low-lift pallet truck Load center: 600 Fork width: 160 mm Fork thickness: 47 mm Transmission: Electromechanical Condition: New Redszfb D Sepfx Aa Iew Technical condition: New Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24V Battery capacity: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Description: - Pin code access - Discharge indicator and operating hour counter, - Lithium battery - Cushioned side support rollers D80x30 - Tandem load rollers D80x70 Impulse control, CE certificate, Non-marking tires, Lithium-ion technology

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 123 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low-lift pallet truck Load center: 600 Rjdpfjzfb D Ejx Aa Iow Fork width: 160 mm Fork thickness: 47 mm Transmission: Electromechanical Condition: New Technical condition: New Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24V Battery capacity: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Description: - Pin code access - Discharge indicator and operating hour counter, - Lithium battery - Cushioned side support rollers D80x30 - Tandem load rollers D80x70 Impulse control, CE certificate, Non-marking tires, Lithium-ion technology

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 123 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low-lift pallet truck Load center: 600 Fork width: 160 mm Fork thickness: 47 mm Transmission: Electromechanical Condition: New Technical condition: New Front tire type: Polyurethane Rjdpfozfb Dxox Aa Ijw Rear tire type: Polyurethane Battery voltage: 24V Battery capacity: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Description: - Pin code access - Discharge indicator and operating hour counter, - Lithium battery - Cushioned side support rollers D80x30 - Tandem load rollers D80x70 Impulse control, CE certificate, Non-marking tires, Lithium-ion technology

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 123 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low-lift pallet truck Rodpfszfb Drox Aa Iew Load center: 600 Fork width: 160 mm Fork thickness: 47 mm Transmission: Electromechanical Condition: New Technical condition: New Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24V Battery capacity: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Description: - Pin code access - Discharge indicator and operating hour counter, - Lithium battery - Cushioned side support rollers D80x30 - Tandem load rollers D80x70 Impulse control, CE certificate, Non-marking tires, Lithium-ion technology

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 123 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low-lift pallet truck Load center: 600 Fork width: 160 mm Fork thickness: 47 mm Transmission: Electromechanical Condition: New Rjdjzfb Dlspfx Aa Iow Technical condition: New Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24V Battery capacity: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Description: - Pin code access - Discharge indicator and operating hour counter, - Lithium battery - Cushioned side support rollers D80x30 - Tandem load rollers D80x70 Impulse control, CE certificate, Non-marking tires, Lithium-ion technology

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Features and technical specifications: - Round pot glue application unit Rsdpfx Aaoyqanbe Ijw - With second glue application unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end cap cutting - Top/bottom milling units: 2 milling units with tracing wheels for radius or chamfering - Radius scraper blade: pneumatically operated, post-processing of radii - Surface scraper blade: for smoothing the edge surfaces - Polishing unit: 2 polishing wheels with motors for final finishing - Riepe spray device - Control: PLC with control panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120 x 840 x 1385 mm Machine weight: approx. 3,000 kg Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1989, Used machine Compact machine for processing molded parts Processes edge material coated with hot-melt adhesive, which is reactivated by hot air Automatic workpiece feed is achieved by pressing the workpiece against the central, driven pressure roller, ensuring uniform adhesive reactivation and consistent bonding reliability Thermostatic temperature control via analog thermostat Maintenance-free three-phase hot air blower for continuous operation Automatic airflow redirection Pneumatically operated roller separating device cuts even the toughest veneer and PVC edges Foot switch for molded part processing Workpiece thickness: 10 - 50 mm Heating output: 3 kW Connection load: 3.3 kW Minimum workpiece width: approx. 25 mm Edge thickness: approx. 0.5 - 1 mm Minimum internal radius: approx. 25 mm Feed rate: 4 m/min Rjdpfswwxykjx Aa Isw Pneumatic system: 6 bar Weight: approx. 105 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical data: - Machine completely overhauled: - New Glue Jet 301 glue application system (top part 1 mm) - All units inspected - All milling cutters resharpened - All knives replaced - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrically adjustable feed motor: 400 V / 50 Hz, 2.2 kW Rsdpfowka Iiex Aa Isw - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy saving function - Infeed fence 1350 mm, motorized adjustment - Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 jointing units for panel edge jointing - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit - Edge feeder 1901 fully automatic - Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Granulate hopper - Pressure unit 1913 MOT - End trimming unit 1918 (60 mm) pneumatic - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, right rotation with CM technology - Scraper unit 1929 MOT2: - Carbide reversible knives for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2002, Used machine Year of manufacture 2002 Edge sander with electromechanical oscillation with a 15 mm pendulum stroke of the motorized disc Swivel of the sanding unit by 90° using a hand crank (continuous angle adjustment; read off the scale) Additional table with extraction system for using sanding rolls Height-adjustable table for utilizing the sanding belt Motor 2.2 kW Oscillation motor 0.11 kW Table size 880 x 370 mm Belt dimensions 150 x 2580 mm Dimensions 1700 x 1000 x 1150 mm Weight 250 kg Rjdpfx Aasw I U Ahe Isw Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - Control unit with 15" touch screen - Jointing milling unit with 2 milling heads - Edge feed - GluJet 301 glue application system: 2.3 kW, automatic glue height adjustment, sensor nozzle - Pressure unit: pneumatic - End trimming unit: pneumatic - Diamond cutters left/right with CM technology - Corner copying unit with diamond cutters - Surface scraper - Polishing unit - Extendable workpiece support - Motorized pressure bridge adjustment with NC axis via program control - Extraction hoods for end trimming unit - Multifunction milling unit: MOT 4 - Vertical tracing rollers: pneumatic - Pneumatic tilting device for milling unit MOT 4 - Scraper unit MOT 2 with chip collection box - Spray unit for infeed and outfeed area - Minimum workpiece length: 160 mm - Workpiece thickness: 6-60 mm - Edge thickness: 0.4-6 mm - Feed speed: 10 m/min Redpfxsy U R Izo Aa Ijw - Total length: 4930 mm - Weight: 1420 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1996, Used machine Rsdpfx Aaskwg Tbo Isw Year of manufacture: 1996 with heated infeed rail Gluing station with electronic temperature control and forward/reverse function - Cutting unit - Milling unit - Profiling blade - Cleaning station - Edge thickness 0.4 - 5 mm - Board thickness up to 50 mm - Part length min. 150 mm - Part width min. 60 mm - Workpiece thickness 8 - 50 mm - Feed rate 12 m/min L x W x H approx. 4000 x 1260 x 1600 mm (Width can be reduced to 800 mm for shipping by removing the extendable support) Availability: by arrangement Location: Hochheim

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Rsdpfx Aev Sv Enoa Isw Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Rjdpfx Aowka Nyoa Ijw Availability: short notice

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Glue tank with glue roller Pre-cutting knife 4 pressure rollers 2-motor cutting unit Radius milling unit Flush milling unit Radius scraper Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Shipping dimensions: 370x100x125 cm Redpewpm Igofx Aa Iew Weight: 1330 kg Location: Röllbach Availability: short term

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Equipment and technical data: - Automatic edge feeding - Cartridge glue system - Pressure unit with 4 rollers Rodpfx Aajyncpvj Iow - Cross-cut saw unit - Flush trimming unit - Combination trimming unit (flush/chamfer/radius) - Radius scraper - Buffing unit - Edgeband thickness: 0.3 - 20 mm - Maximum edgeband height: 66 mm - Minimum edgeband length: 200 mm - Feed speed: 8/16 or 12/24 m/min Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - Joint milling unit FG 201 with 2 milling heads incl. diamond milling cutters 70 x 48 x 30 mm, Z 2 - Edge feeder 1903, single feed, automatic transport of coil and strip material - Gluing system Glu Jet GJ 301 with automatic glue height adjustment (touch-sensitive nozzle) - With magazine for glue cartridges - Printing unit 1912-3, pneumatic, first roller driven with pneumatic immersion control - Trimming unit 1918, pneumatically pivoting 0-10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package incl. diamond milling cutters - Profile milling unit 1832 for corner copying with radius milling cutter - Pull blade unit 1929 MOT 2 - Chip collection box Redpfxezdlwyo Aa Ijw - Surface pull blade FK 701 - Deburring unit 1940 - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6-60 - Edge thickness (mm) 0.4-6 - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420

Condition: excellent (used), Catalogue number: 7983 TECHNICAL DATA Equipment: - Disc - Pre-milling unit - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) - End trimming unit with saw blades front/rear - 2 edge milling units, top/bottom with radius cutters - 2 scrapers for removing excess glue, radius, top/bottom - Corner rounding unit - Straight scraper, top/bottom - 2 polishers - Max feed speed: 10 m/min - Min workpiece length: 260 mm - Min workpiece width: 90 mm - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Pull-out workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (LxWxH): 5000x1520x1600 mm - Weight: 1295 kg ADVANTAGES - Not repainted / original paint - Pre-milling, corner rounding - Control panel with quick selection of pre-set work programs - German made - Full technical documentation (DTR) - Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) - Very good condition Redpfxoy Id Nle Aa Ijw - Used edgebander Net price: 38,900 PLN Net price: 9,260 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), The BIBO TC84, a professional Italian edge coating machine, is designed for coating both sides of leather and finishing edges. This machine is used in the production of belts, straps, bags, wallets, and other leather goods that require aesthetically pleasing edge finishing. The device allows for the even application of coating to the edges of the material, significantly speeding up the production process and ensuring high consistency in the finished product. Technical data: Manufacturer: BIBO Model: TC84 Country of origin: Italy Power supply: 380 V 50 Hz Two-sided edge coating Adjustable operating parameters Adjustable material guide Rodpfx Aozgvfysa Ijw Stable steel construction Cabinet/base included Applications: leather belts straps handbags wallets leather goods leather products Condition: Used machine. Visual condition as shown in the photos.

Condition: good (used), Year of construction: 1994, Oscillation ja ja / nein Rjdpfxszfqkzs Aa Isw ja ja/nein ja ja/nein tiltable up to 30 Grad Motor output 2,8 kW Table dimensions 850 x 300 mm sanding width 150 mm Weight 330 kg

Condition: ready for operation (used), Koller Roller Mill,Roller mill, Roller Pan mill, Pan mill,Pan mixer, Used Machinery Model: Gebrüder Netzsch 205 ST; 251283 Dimensions: 1400 x 1300 mm Weight: 735 kg Year: 1965 Electrical Data: 400 V; 50 Hz; 4/2.9 A Stone Size: 500 x 150 mm Rodpfxouh Rkxo Aa Ijw Koller mills are designed to ensure excellent grinding quality for all industrial applications. Whether it’s for minerals, cereals, or food products, Koller mills provide reliability and durability. Choose Koller mills to experience outstanding performance and long-lasting reliability!

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 3.6 kW (4.89 HP), Sanding belt width 150 mm, sanding belt length 2000 mm, table manually tiltable Rodpfx Asy D Du Hoa Ijw

Condition: excellent (used), CATALOG NUMBER 7854 Rjdpfxozfpnrj Aa Iow Technical data: - belt length: 2515x152 mm - belt width: 150 mm - oscillation - vertical oscillation movement - sanding length: 790 mm - table size: 840x300 mm - worktable for contoured elements: 300x250 mm - worktable adjustment: 80 mm - motor: 2.2 kW - sanding unit adjustable angle: 90-45 degrees - sanding head adjustment: 0-45 degrees - extraction port diameter: 100 mm - dimensions (length/width/height): 1450/600/1230 mm - weight: 138 kg ADVANTAGES – with oscillation – with shoe – suitable for contour and straight sanding – unit can operate vertically and horizontally – unpainted – used sander, very good condition Net price: 3,900 PLN Net price: 930 EUR (depending on the 4.2 EUR rate) (Prices may change with higher fluctuations)