Used Espresso Machine for sale (64,877)

Condition: used, Falzeinbrenn- und Abpressmaschine - Book press and joint-setting machine Zechini CIMATIC Year 2000 - Serial-No. 124/00 Buch Format max. Buchhöhe 48cm x Buchbreite 35cm x Buchblockstärke 9cm Book Size max. height 48cm x width 35cm x thickness 9cm Leistung max 150 in St./h / Output 150 pcs/h Pressluftanschluss 6 bar / Air pressure supply 6 bar Dodpfxs Aikf Ij Ai Eowd Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Wire Stitching Machine AGRAFIX BX Dwsdpfx Ais Aikghe Eed 1-head wire stitcher for block- and saddle stapling. Year 1992 - Serial-No. 190121 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm B-axis (table) 360.000 x 0,001° deg milling-head swivable +/- (HV) 360.000° deg pallet size: 1000 x 800 mm table load 3000 kg tool taper SK 50-B Plananlage 125 spindle turning speed range max. 8000 U/min transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min max. torque on the spindle 1410/2000 (100/40 % ED) Nm total power requirement 100 kVA dimensions of the machine ca. 11555 x 7998 x 5050 mm Additional information Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 110-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Dsdozvm Hyopfx Ai Ejwd Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70294 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Dodpez D Aqusfx Ai Ejwd Transport dimensions: 4100 x 2500 x 3000 mm

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control Djdpfxs Aa N Tbo Ai Ejwd - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 rpm spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, Heidenhain iTNC 530 CNC control Travel ranges: X-axis 1.016 mm Y-axis 610 mm Z-axis 760 mm Spindle speed 10.000 rpm Tool holder HSK 80 Power 12 kW Table clamping surface 1.250 x 590 mm Table load 900 kg Feed rate 40.000 mm/min. Machine weight 9.400 kg Equipment: Heidenhain iTNC 530 CNC contouring control Electronic handwheel 3D touch probe Dwjdpfxoz S H H De Ai Eed tool changer 2-position pallet table Coolant system with internal coolant supply (ICS) Chip conveyor Oil mist extraction system

Condition: used, ZOCCA RU 2000/3 UNIVERSAL CYLINDRICAL GRINDING MACHINE • Manufacturer: Zocca (Como, Italy) • Model: RU 2000/3 (External / Hydraulic Universal Grinder) • Center Height: 180 mm • Maximum Grinding Diameter: 360 mm • Distance Between Centers: 2,000 mm • Drop down Internal Spindle • Steady rests • Coolant system Dwedpfs Ah H D Nex Ai Esd • Spare wheels • Safety foot switch • Machine manual

Condition: used, Plasma impulse gas metal arc welding machine, pulse machine EWM Type Tetrix 400 Plasma / Tetrix 400 DC-P Robot Dsdezwb R Nepfx Ai Eswd Plasma welding and soldering machine Art. No.: Serial No.: Year of manufacture 2003 Output: 400 amps = 40% duty cycle 360 amps = 60% duty cycle 300 amps = 100% duty cycle Setting range: stepless Open-circuit voltage: approx. 26 volts Mains connection: 400 volts, 50 Hz, 32 amps plug - Digital display for current - Digital display for voltage, job, and program - Various welding programs can be selected - Pulse mode - Separate 4-roller wire feeder EWM, Type DV cold wire hand with connecting hose package approx. 5 meters - Approx. 4 meter hose package - External EWM water cooling, Type Cool 71 U41 DKF - External high-voltage unit - Welding machine equipped with 1 mm welding wire Space required L x W x H: 1300 x 640 x 1830 mm Weight: 245 kg Very good condition

Condition: used, Year of construction: 2007, type of input current: three-phase, pressure: 8 bar, input voltage: 400 V, power: 12 kW (16.32 HP), No. 3288 4-head welding machine Urban AKS 6110/4-30/27 Used, year of construction 2007 (overhauled 2025), good condition, annual maintenance According to our customer / the previous owner, the machine is fully functional and can be inspected on site Horizontal 4-head welding machine for PVC window profiles Welding of 4 corners in one operation Version with right-hand stop Integrated outfeed conveyor for transfer to a corner cleaning machine Online interface AKS-SV for data transfer to the corner cleaning machine Working range Frame size X 420 - 2700 mm, Y 350 - 3000 mm Profile height 50 - 200 mm, profile width max. 150 mm Clamping height 200 mm, pneumatic clamping cylinders SH 200 Welding technology Weld bead limitation 0.2 mm with heated squeeze plates and stainless steel knives Squeeze gap adjustment WSK Heating plates 230 x 325 x 15 mm with Teflon holder and Teflon reel Temperature controller Urban UTR 320 Djdpfe Ahzp Sex Ai Eswd Electronic pressure regulator Welding temperature, heating time, alignment pressure, joining pressure, joining time and clamping pressure individually adjustable Automatic profile stop with automatic release and adjustment of profile supports Valve manifold for special units Control and drives PC control Ferrocontrol (Windows) with industrial PC FIPC 5.9 Network-capable control CNC positioning via 3 AC servo axes (X, Y1, Y2) Connected loads Power supply 3/N/PE 230/400 V, 50/60 Hz Connected load 12 kW, 17 A Operating pressure max. 8 bar CE marking Installation dimensions approx. 6500 x 5000 x 1510 mm LWH Weight approx. 3500 kg Sale on behalf of customer, ex location near 37073 Göttingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: used, Year of construction: 1999, max. wheel diameter 360 mm gear width 175 mm max. module 7 min. module 0,5 root circle diameter min. 10 mm grinding stroke max. 175 mm max.helical angle +/- 45 ° max. number of teeth 600 min. number of teeth 6 workpiece weight max. 60 kg grinding wheel diameter min/max280/350 mm total power requirement 26 kW weight of the machine ca. 6,6 t Features: - Equipped with a Burri dressing system without interchangeable gears - Workpiece drive was replaced in 2015. - Z-axis overhauled at the factory(2015) - Coolant cleaning device - Includes documentation Dodpfx Aj Ahkh Rei Eowd Spare Parts and Accessories: - 30 flanges profiled with grinding wheels – plus approx. 10 grinding wheels - 4 sets of standard diamond wheels - Various custom-made special diamond wheels - Various electrical and mechanical spare parts - 3 pressure intensifiers for hydraulic clamping - 1 collet, Ø30 - 1 collet, Ø65 - Various spray nozzles on the spindle side

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-3A, The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the carton are closed first, only then is the carton glued. Carton formats: Length 150 - 600 mm Width: 115 - 490 mm Height: 110 - 510 mm Technical data: Length 1,800 mm Width 880 mm Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 CE marking Dwedo Ah E Siopfx Ai Eod IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Year of construction: 2026, condition: new, The VOGEL V540E is a high-performance, automated paper cushioning machine and one of the most efficient paper void fill systems in its class. It processes wide paper rolls up to 500 mm and produces high-quality, three-dimensionally structured paper cushions (“paper bubble cushions”) with outstanding cushioning properties. Ideal for professional packing stations, logistics centers, and larger e-commerce operations seeking an ecologically sustainable, high-performance, and cost-effective alternative to conventional bubble wrap. With automatic length control and an optional winding mode, the V540E is capable of producing both loose cushioning pads as well as complete cushioning rolls for storage or further processing. Advantages: - The VOGEL V540E is a high-performance, automated paper cushioning machine and among the most efficient paper filling systems in its category. - It processes wide paper rolls up to 500 mm and produces premium, three-dimensional structured paper cushions (“paper bubble cushions”) with excellent shock-absorbing properties. - Perfect for professional packing areas, logistics centers, and large e-commerce frameworks requiring an environmentally friendly, high-capacity, and cost-effective solution to traditional bubble wrap. - Thanks to automatic length control and optional winding mode, the V540E can manufacture both loose cushion pieces and full-length cushion rolls for storage or further processing. Dsdps Ah Eyqefx Ai Eewd Special Features: - Easy operation - Excellent price-performance ratio - Optional winding station / automated cushion roll production - Optimal replacement for bubble wrap - 100% recycled paper Our Service for a Strong Partnership: - Free technical hotline - Long-term spare parts availability - 99% of spare parts available within 24/48 hours - We supply the right consumables for your application! About us: Since the early 1980s, we have accumulated practical expertise in handling packaging machinery. This makes us true experts – not just in the machines themselves, but also in their functionality, strengths and weaknesses, applications, consumables, and cost-benefit ratios. We always pass this experience on to our customers. For example: Attention! Mistakes in selecting a new product can quickly lead to high costs, making your investment uneconomical or resulting in insufficient performance!

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: Serial No.57/19, total length: 9,370 mm, total width: 2,900 mm, total height: 3,890 mm, overall weight: 4,490 kg, input current: 83 A, input frequency: 60 Hz, type of input current: AC, input voltage: 400 V, power: 50 kW (67.98 HP), workpiece weight (max.): 300 kg, We offer this used Neptun MASTER WAVE HP 2800 glass washing machine, manufactured in 2019. Wave HP 2862-80 HD Neptun’s heavy-duty vertical glass washer is designed for intensive use, with corrosion-resistant components and extensive use of AISI 304 stainless steel. It handles glass up to 80 mm thick and 300 kg per linear metre, including float, acid-edged, coloured, printed and pyrolytic glass. Inlet conveyor The 3,200 mm inlet conveyor has motorised rubber rollers, bevel-gear transmission and stainless-steel shafts. Sensors detect glass thickness and dimensions for PLC control. Its independent drive pauses incoming sheets during thickness changes until the machine is clear and adjusted. A foot pedal allows heavy sheets to be loaded while the conveyor is stopped and the rest of the machine continues running. Prewashing and washing A separate 400 mm prewashing module isolates prewash water from the main wash. Without a closed-circuit tank and pump, water consumption is 1,200–2,400 l/h. Three washing circuits use three pairs of 160 mm brushes with 0.30 mm bristles. High-density front brushes have inverter-controlled speed. Separate overhead motors drive front and rear brushes. Each circuit includes a 900 µm inlet filter, a 300 or 150 µm cartridge filter, a stainless-steel immersion pump and a drain valve. The first two circuits have independently controlled heating up to 50°C. A separate rinsing circuit sprays both glass faces. Water management Water flows from the final circuit towards the first tank. Specified water limits are conductivity below 150 µS, salts below 80 mg/l, chlorides below 30 mg/l, hardness below 6°f and no iron. Demineralisation is required where these limits are not met or for insulating-glass production. Programmable preheating and automatic tank draining/refilling prepare the machine for the next shift. Rinse-tank conductivity control regulates demineralised-water input. Flowmeters display circuit flow and trigger cleaning alarms for filters or nozzles. Drying and energy saving Dwodpfe Ah Hgzsx Ai Eed The sound-insulated drying section uses one set of air knives, automatically positioned to suit glass thickness. Belt transport avoids roller contact after rinsing. SmartSpeed sets separate speeds for washing/drying and final trailing-edge drying. Stated fixed-speed performance applies to glass up to 10 mm without holes or notches; thicker glass or glass with holes or notches may require slower drying. Ecosave® automatically reduces drying airflow and energy demand when glass is absent. The source quotes savings of up to 41%, with a separate Ecosave Full example claiming 60% under the specified glass-size and spacing conditions. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1954, wire dia. . mm wire length . mm Dwsde Ah Id Nepfx Ai Eod pulling capacity 7 t total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand accessory: the ‘Canon Staple Finisher-AG1’ finishing system Item for sale: 1 x Canon Staple Finisher-AG1 Condition: This listing is for a second-hand accessory, which may show signs of wear (minor scratches or discolouration). The accessory has been tested to ensure it is in working order. Djdpfsz A Akfox Ai Eowd Packaging and dispatch: You are welcome to view the item during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Condition: used, Year of construction: 1997, Used Machine Year of Manufacture: 1997 Features and Technical Specifications: Djdpszk Nu Asfx Ai Eewd - Fitting drilling head - Drilling unit with 3/4 spindles - 2 clamping cylinders - Motor power: 0.8 kW - Power supply: 400/50 volts / Hz - Machine dimensions - Dimensions: 950 x 650 x 700 mm - Weight: 80 kg

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft - 1.5 kW motor with 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits - Machine needs to be inspected/serviced. Basic functions are intact Djdpszk N Dwsfx Ai Eowd Availability: available shortly Location: 63934 Röllbach

Condition: good (used), Injector for plastering machine, gypsum plastering machine -Injector: for cleaning machine -Connections: see photos Dedpo Ah Dwtjfx Ai Eewd -Dimensions: 1420/640/H930 mm -Weight: 57 kg

Condition: good (used), Year of construction: 2006, Used insertion press HAEGER 824 plus-1H with feed hopper Technical data: Manufacturer: HAEGER Model: 824 plus-1H Year of manufacture: 06/2006 Condition: good, used Press force, min: 2.0 kN Press force, max: 72.0 kN Insertion capacity up to 1800 pieces Adjustable range of ram: 0-220 mm Overhang: 610 mm Connections: 3 phases, 50 Hz, 380 V, 16 A Electronic control / CE: 24 V Motor power: 3.6 kW Oil capacity: 83 l Dimensions (W x D x H): 1100x1650x2400 mm Weight: 1450 kg Fully hydraulic insertion press for manual and/or automatic processing of insertion fasteners from all manufacturers. Fastener range: M2-M10. Djdpfx Ae Ahwkrei Eswd Standard equipped with a patented safety control system. Due to the integrated fixed stop, the precise pressure build-up, and the low assembly value, the machine is ideally suited for use as an "assembly/riveting press". including accessories: Modular, patented fastener feeding system from Haeger-MAS-9 Advantages: - Fasteners in the size range M2-M8 can be fed - Processing capacity up to 1500 pieces per hour - Very easy tool change without adjustment effort (plug-in tool modules) - Tool change time, e.g. from nuts to bolts or bushings, approx. 2 minutes - Large feed hopper made of wear-resistant, stainless steel The picture shows the same model, but not the machine itself that is for sale.

Condition: used, Year of construction: 2020, functionality: fully functional, Industrial Throughfeed Grinding Machine – IFS IF-Vario M1600EC Serial number: 2368 Manufacturer: IFS Dwsdpo Ah Swtofx Ai Esd Machine type: IF-Vario M1600EC Total connected load: 152 kVA Total weight: approx. 12,000 kg The machine is equipped with two motor spindles, each capable of delivering a maximum power of 48 kW. The grinding process is performed using diamond grinding wheels with a diameter of 600 mm and a maximum peripheral speed of 32 m/s. The system allows for the processing of workpieces with a thickness of up to 45 mm. The adjustable grinding allowance ranges from 0.8 to 25 mm. The workpiece feed rate can be continuously adjusted within the range of 20 to 240 mm/s. Electrical and technical connection data: Supply voltage: 400 V Mains frequency: 50 Hz Rated current: 220 A Required fuse rating: 250 A Connected power: 152 kVA Control system: Siemens 840D sl Measuring and control system: DISKUS IONIC 18 Media supply: Compressed air connection: 6 bar Compressed air consumption: 150 l/min Coolant flow rate: 250 l/min Integrated extraction system Dimensions and weight: Machine dimensions including coolant filtration system: 4,600 × 5,200 × 3,000 mm (W × D × H) Machine weight: approx. 11,000 kg Total weight as stated: 12,000 kg Existing equipment: Automatic workpiece loading via conveyor system Integrated measuring probe for workpiece measurement Automatic good/bad part sorting (I.O./N.I.O.) Camera-assisted grinding wheel breakage detection Coolant supply with filtration system Extraction system

Condition: used, Year of construction: 1999, Description of Hundegger K1-A Equipment: 1. Cross-sections: 20 x 60 to 300 x 450 mm 2. Infeed cross conveyor: 7 strands, 2.2 m 3. Undercutting miter saw 4. Universal milling machine - Roller cutter - Finger cutter 5. Combination support for vertically operating tools - 1 drilling unit - 1 finger milling machine 6. Combination support for horizontally operating tools - 1 drilling unit - 1 slotting machine 7. Beam turning station, fully automatic Machine installation: 8. Substrate, foundation: Dwedps Ah Swwefx Ai Eed - The base plate must have a thickness of at least 10 cm (with corresponding good reinforcement). - This should be level and suitable for anchoring. 9. Energy requirements, type, quality, quantity: 09.1 Electrical: - Voltage: 400/230 V, 3/N/PE - Fuse rating: 3 x 63 A - Frequency: 50 Hz - Peak demand: 15 kW - The mains voltage must be constant and uninterrupted within the specified tolerance range! 09.2 Compressed air: - Flow rate: V < 600 l/min - Pressure: Operating pressure p = 8.5 bar - Maximum permissible pressure p = 10 bar Important: The control system was updated by Hundegger from MIPPS to CAN in autumn 2020. Price ex works, location D-91154 Roth: 25,000.00 EUR

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: CIP-8P_1003, overall weight: 320 kg, total length: 650 mm, total width: 2,300 mm, total height: 1,100 mm, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Pneumatic Press-In Machine CIP-8P Technical Data: Pressing force 80 kN, approx. 8 tons Force setting via display, accuracy 1 kg Compressed air 8 bar, min. 150 l/min Tool and shank diameter: Total length 37 or 76 mm, of which 15 mm is in the holder, Ø 12.7 mm Compatibility: Tools from other manufacturers can also be used External dimensions (L × W × H) and weight: 650 × 2,300 × 1,100 mm, 400 kg Warranty: 36 months after delivery Djds Ah Sgvjpfx Ai Eswd

Condition: used, total height: 2,700 mm, total width: 3,000 mm, total length: 5,300 mm, Year of manufacture: 1992 Colour: White Empty weight: 11.000 kg Price: On request - Year: 1992 Dwsdpfx Aiszwn Ege Esd - Serial number: 9220212 - Drive system: Conventional - Bed milling machine model: Movable table - Number of axes [pcs]: 3 - X-axis travel [mm]: 3200 - Y-axis travel [mm]: 1000 - Z-axis travel [mm]: 1000 - B-axis rotation [°]: 360 - C-axis rotation [°]: 360 - Table length [mm]: 3500 - Table width [mm]: 800 - Tool holder: ISO50 - Main spindle power [kW]: 15 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout - └ Type of digital readout: Sony 3-A - Transport dimensions: 5300mm x 3000mm x 2700mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 124 control, manufactured in 2008. Excellent CONDITION, CE-compliant!! Technical data: >> Year of manufacture: 2008, Machine No. 346199 >> Fixed angular table >> Speed: continuously variable up to 4000 rpm >> Feed rate: continuously variable in 3 axes from 0 to 2000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Rapid traverse rates x/y/z: 5 / 5 / 4 m/min >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke, vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1700 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 12 kVA Dodpfxj Ah Tvbs Ai Eswd Accessories and equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system About the machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from a company where it was used only sparingly for training purposes. It features a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Switching from vertical to horizontal is very easy, by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: used, Year of construction: 1991, working area 225 mm table-size L:550 mm Dwodpfx Ajud Algoi Eed table-size B:200 mm sanding disc diameter 200mm mm magnetic plate size 500 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 2000x1600x2100 m