Used Ess Synmag 4000 for sale (13,234)

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Iijdpfx Aewkaalskxsf

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar Iodpfx Akozimcbsxeif - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Iiedpfozc N U Iox Akxef Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross-transfer of boards with a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turners and sorters before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - cut length 505 mm for the underlying vibration trough - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - Automatic lowering of finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers Iodpfx Akjy Uzhfoxjif For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. We can provide a process video via WhatsApp!

Year of construction: 2002, condition: used, machine/vehicle number: 001, Description Offered is an automated side board processing line with singulation, trimmer for end trimming, 2 stacking machines, additional discharge, and end trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at a joystick: - Boards are conveyed laterally using a 4-strand overhead chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer Nlewsy Uzhfj D A Tmcob - Edge detection (ALFHA-Edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick assesses: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box, with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats, with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - trimming length 505 mm for the underlying vibration channel - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - automatic lowering of the finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee processed, packaged, and strapped approximately 15,000 boards of side lumber 4000/17 x 76 mm in 9 hours. Iiedpfxjy Uzlds Akxsf The system is still assembled, but the upstream chipping plant has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. A video of the process can be shown via WhatsApp!

Condition: used, Year of construction: 2003, Overview The KSB4000 blowing machine was manufactured in 2003 by the Austrian machine builder KOSME. For capacity reasons the blow moulder is now for sale and can be visited at side. Technical details  - Capacity: 4.000 bph  - 4 cavities - Dimensions (LxWxH): 4.500 mm x 1.600 mm x 3.250 mm  - space requirement approx. 22 m² (incl. preform feeding system) - Bottles - 1,0 l PET - 0,5 l PET Iijdpewizc Eofx Akxsf - 0,33 l PET Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Also included is the air conveyor with a length of approx. 25 meter and 5 blower motor.

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Specifications: Capacity: 4,000 L Type of stainless: Stainless Steel Internal Pressure: 6 bar Internal Temperature: 130°C Iiedozdfb Hspfx Akxsf Jacket Pressure: 9 bar Diameter: 1,800 mm Straight Side: 2,450 mm Type Of Heads: Welded Dished Top and Bottom Legs/Lugs: 4 Lugs

Condition: used, Year of construction: 1998, Technical details: turning diameter: 830 mm turning length: 4000 mm turning diameter over bed slide: 540 mm spindle bore: 130 mm turning speed range: 2 - 1600 U/min rapid speed: 4 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 55 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 7 x 2,2 x 2 m Isdpfswwlt Rjx Akxjif with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment *

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 552 h, load capacity: 2,500 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,650 mm, motor manufacturer: TOYOTA 4Y, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,070 mm, fork width: 125 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 22 X 10 X 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, all wheel drive, front guard, head guard, lighting, pallet forks, sideshift, 🚜 COMBILIFT CB2500 | GAS | DUPLEX 4000 MM | FREE LIFT | FORK POSITIONER | SIDE SHIFT | OPEN CABIN | READY FOR WORK ✅ FULLY SERVICED MACHINE ✅ WARRANTY INCLUDED 🌍 WORLDWIDE DELIVERY AVAILABLE If you are looking for a forklift that will generate value from day one instead of creating maintenance costs, this machine is the perfect solution. We offer a reliable and fully prepared COMBILIFT CB2500 multidirectional forklift. The machine has undergone a complete technical inspection, comprehensive servicing, and detailed operational testing. It is ready for immediate deployment in production facilities, warehouses, logistics centers, steel yards, and timber operations. ⭐ KEY BENEFITS ✅ Fully serviced prior to sale ✅ Start-up warranty included ✅ Brand new super elastic tires ✅ Excellent technical and cosmetic condition ✅ Only 552 operating hours ✅ Ready for immediate operation with no additional investment required ✅ Live online demonstration available ✅ Direct delivery to the customer's facility available 🔧 TECHNICAL SPECIFICATIONS 🏭 Manufacturer: COMBILIFT 📌 Model: CB2500 📅 Year of Manufacture: 2017 🏋️ Load Capacity: 2,500 kg ⛽ Engine: TOYOTA Gas 🕒 Operating Hours: Only 552 h ⬆️ Mast Type: Duplex 📏 Lift Height: 4,000 mm ↔️ Fork Positioner Width: 1,400 mm 🔩 Fork Length: 1,070 mm 🚜 Cabin: Open Operator Cabin ⚖️ Service Weight: 6,300 kg 📐 DIMENSIONS 📏 Overall Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,500 mm 📏 Lowered Mast Height: 2,650 mm 🛞 TIRES Front: 16 x 7 x 10½ Iisdpfxezq R Rxj Akxjf Rear: 22 x 10 x 16 ✅ Tire Condition: 100% New ⚙️ EQUIPMENT ✅ Hydraulic fork positioner ✅ Side shift ✅ Free lift ✅ Open operator cabin ✅ Working lights 🏭 IDEAL FOR 🌲 Timber and wood processing industry 🏗️ Steel mills and steel service centers 🔩 Structural steel manufacturers 📦 Handling pipes, profiles, beams, and long loads 🏢 Indoor and outdoor applications 🤝 WHY CHOOSE FT LOGISTICS? When purchasing from FT LOGISTICS, you are working with a company specializing exclusively in forklifts, sideloaders, multidirectional forklifts, and professional warehouse equipment. 🔍 Every machine undergoes a comprehensive technical inspection, full servicing, and operational testing before delivery. 🌍 With more than 100 machines available from stock, we supply customers throughout Europe, South America, Africa, Asia, and the Middle East. 🎯 WE PROVIDE ✅ Full pre-sale servicing ✅ Warranty coverage ✅ Professional technical support ✅ Leasing and financing solutions ✅ Transportation arrangements ✅ Export handling and customs documentation ✅ After-sales support 🏆 Hundreds of customers across Europe trust our equipment and continue to return for future purchases. 📞 CONTACT FT LOGISTICS Sp. z o.o. 🎥 We can arrange a live online machine demonstration, provide additional photos and videos, and prepare a customized transport quotation directly to your location. FT LOGISTICS 🚜 We Deliver Machines Ready for Work.

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 2000 mm -Length: 4000 mm -Height: 255 mm -Plate thickness: 95 mm -Plate: with support ribs -Groove width: 42 mm -Groove spacing: 700 mm Iodpfx Ajhqt Hhskxoif -Number: 2 clamping plates available -Price: per piece -Weight: 6600 kg/piece

Condition: good (used), Metal detector for conveyor belts, all-metal detection system, tunnel metal detector -Manufacturer: SS Temafa, Metal Detector All-Metal Detection System -Metal detector: SS TFX 4000/440 Iiodpfxjrz Syys Akxsf -Detector opening: Ø 440 x 530 mm -Control: Temafa MSG 4-FF -Individual components: see photos -Dimensions: 750/530/H790 mm -Weight: 96 kg

Condition: good (used), Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Reliance Electric, servo motor Iisdpfx Ajw Adq Sokxef -Type: H-4050-P-HOOAA -Power: 1.86 kW -Speed: 4000 rpm -Frequency: 0-200 Hz -Technical data: see photo type plate -Shaft: Ø 19 x 50 mm -Number: 4 motors available -Price: per piece -Dimensions: 315/120/H145 mm -Weight: 9.2 kg/piece

Condition: good (used), Ring variable transformer, transformer -Primary: 230 V 2.0 A 50-60 Hz -Sec: 260 V/ Iedpsb A N Suofx Akxjif

Condition: used, Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer Iedpfxel Dvtvo Akxoif -Heavy-duty transport vehicle: Industrial trailer with 2-axle turntable steering -Platform: 4000/1450/H670 mm, dimensions see photo technical drawing -Load capacity: 5 t -Tires: solid rubber -Number: 2x transport trolleys available -Price: per piece -Transport dimensions: 5590/1700/H1860 mmm -Weight: 1800 kg/pc.

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: Transport belt with base frame -Speed: 41 m/min -Belt width: 480 mm -Conveyor length: approx. 4000 mm -Motor/transmission: SEW Vector, 0.55 kW / 110 rpm -Overall dimensions: 4540/730/H1090 mm Iisdpfxoh Ak Ulj Akxof -Weight: 300 kg

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: MAFI, heavy-duty transport trolley with 1-axle turntable steering and parking brake -Platform: 4000/2500/H895 mm -Load capacity: 22 t -Tires: Solid rubber dual tires 540x200x410 see photos -Overall dimensions: 5750/2500/H895 mm -Transport dimensions: 4000/2500/H895 mm -Weight: 2720 kg Iiodjyl Urqspfx Akxjf

Condition: good (used), Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking Iedpfx Ajyu Um Tekxjif -Cantilever rack: two-sided, height 4000 mm -Stands: 5x 340/150/H4000 mm / 350/300/3400 mm -Cantilever arms: 70 pieces 140/140/1500 mm -Cross braces: 124 pieces 60/40/1350 mm -Submission/Price: complete -Weight: 4100 kg

Condition: good (used), Incremental rotary encoder with solid shaft, absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, rotary indicator, resolver, rotary pulse generator, tachogenerator, incremental encoder -Manufacturer: Hohner, encoder rotary encoder -Type: 30 4000 -Shaft: Ø 12 x 25 mm -Number: 2 encoders available -Price: per piece Iedoqvp Rhopfx Akxsif -Dimensions: Ø 90 x 143 mm -Weight: 1.1 kg/pc.

Condition: good (used), Assembly star, assembly table, workbench, welding table, clamping plate, gluing press, gluing star, glue press, gluing stand, rotating device, container rotating device, welding rotating device -Cube size: 750 x 750 mm -Working width: 750 x 4000 mm -Geared motor: 0.18 kW -pneumatic disc brake -Foot switch -Dimensions: 5250/1100/H2750 mm -Weight: approx. 800 kg Iijdpjb A Smnofx Akxof

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Mounting plate: with support ribs -Clamping surface: 2000 x 4000 mm -Sheet thickness: 85 mm -Plate: with supporting ribs -Quantity: 1 mounting plate available -Price: per piece -Dimensions: 4000/2000/H405 mm -Weight: 8800 kg Iiedox Sym Ujpfx Akxof

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic ram, air ram, rotary drive, actuator, actuators, gear motor, rotary valve, pneumatic cylinder actuators Iodpfx Akocxq Aqexsif -Stroke: 83 mm -Piston diameter: mm -Piston rod: 30 mm (connection thread) -Total length: mm -Total length extended: mm -Dimensions: 530/380/H380 mm -Weight: 26 kg

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm Iisdpfx Akel Tuvdexef -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with adjustable feet -Length: 7990 mm -Width: 2480 mm -Height: 350 mm -Sheet thickness: 30 mm -Quantity: 2 mounting plates available -Price: per piece -Transport dimensions: 7990/2480/H350 mm / 1200/800/1000 mm/piece -Weight: 9500 kg/piece Ijdpey Ndtyjfx Akxsif

Condition: good (used), Year of construction: 1986, Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, hydraulic lifting platform -Scissor lift table: with weighing unit and trolley, each without control, and weighing display -Load capacity: 2000 kg -Platform: 4000 x 1420 mm -Dimensions retracted: height 430/675 mm -Extended dimensions: height 1145/1390 mm -Rolling chassis: roller spacing for rail 1100 mm Iedpfx Aew Hyfmskxjif -Transport dimensions: 1420/4000/H675 mm -Weight: 2600 kg

Condition: good (used), Adjustable geared motor, variable speed geared motor, electric motor -Manufacturer of gearbox: AEG Motor manufacturer: AEG Iijdpsciq Dysfx Akxef -Motor power: 0.175 kW -Speed range: 450-4000 rpm -Motor: adjustable -Design: B3 -height of shaft axis: 80 mm -Drive shaft: Ø 14 mm -Quantity: 1 motor available Price: per piece -Dimensions: 380/200/H240 mm -Weight: 22 kg