Used Ess Synmag 4000 for sale (13,411)

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Hodsu Tg I Djpfx Aatjnk Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Heavy-duty transport wagon: with single-axle steering -Platform: with crossbeam 4000/1460/H605 mm -Platform: without crossbeams, height 500 mm -Load capacity: 3 t -Tires: Solid rubber tires 65x305/400, see photos Hnsdpfx Aajydvdrstek -Overall dimensions: 6040/1460/H605 mm -Transport dimensions: 4440/1460/H605 mm -Weight: 373 kg

Condition: used, Year of construction: 2016, Injection moulding machine Type: Arburg 820S 4000-4600 Year of manufacture: 2016 Injection volume for PP = 2850 ccm Injection weight for PP approx. 2450 g Hnedpfx Asyqwfdeatjk The machine is offered without peripherals, handling equipment or safety fencing – purely the machine itself.

Condition: good (used), VDF HEIDENREICH & HARBECK Lathe 4000/700 mm Machine Dimensions (LxWxH): 6000x1700x1500 mm Weight: 4000 kg Hedpfx Asiau E Toatonk Accessories included

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9101, travel distance Y-axis: 4,600 mm, travel distance Z-axis: 1,600 mm, rotational speed (max.): 6,000 rpm, Equipment: rotational speed infinitely variable, Machine configuration: • PowerPortal4000 Hedpfeygtnasx Aatsnk • 45° diagonal milling head (C 0.01° / A 0.01°) • Camera system integrated in SHW diagonal milling head • 4-point Hirth-type milling head interface • Heidenhain TNC 7 • HR 550 FS handwheel • Heidenhain optimization for 5-axis machining • X = freely selectable, Y = 4,600 mm, Z = 1,600 mm • ToolCenter with 90 tools • Coolant system 2,500 l • Coolant pump 70 bar / 30 l/min • Coolant/air switching • Wash gun in the working area • Main drive 75 kW up to 6,000 rpm • Tool holder SK 50 BIG-PLUS • Panelling and grating • Double chip conveyor • SHW-UniScan • Sealing air • Operating mode 3 • Hexagon wireless probe • LED workspace lighting • Second camera in the working area

Condition: used, Year of construction: 2018, Technical details: lifting capacity: 0,125 t swival range : 180 ° Arm length: 4000 mm arm length:: Säule - Kranhaken: 3850 mm height lower edge cantilever arm: 3000 mm column diameter: Ø 220 mm rotation: 270 ° Dimensions of the crane assembled: LxWxH: 4800 x 1300 x 3250 mm Dimensions of filling container: LxWxH: 1100 x 1000 x 740 mm Column height: 3200 mm Hodpfxsu Utmpo Aatsnk Heavy-duty operation = manual with swivel stop Hoist: Hans Hebetechnik load capacity 1000kg; lifting height approx. 2400mm; hook Ø 30mm with rope safety device; travel distance hoist 2700mm; control via pendant control The crane can be moved via the filling container. *

Condition: used, Year of construction: 2003, Overview The KSB4000 blowing machine was manufactured in 2003 by the Austrian machine builder KOSME. For capacity reasons the blow moulder is now for sale and can be visited at side. Technical details  Capacity: 4.000 bph  4 cavities Dimensions (LxWxH): 4.500 mm x 1.600 mm x 3.250 mm  space requirement approx. 22 m² (incl. preform feeding system) Bottles 1,0 l PET 0,5 l PET 0,33 l PET Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Also included is the air conveyor with a length of approx. 25 meter and 5 blower motor. Hnsdpjwizc Eofx Aatjk

Year of construction: 2002, condition: excellent (used), X-4.000 / 2x1.750 , Y-900 , Z-700 ,SK 40 , 60-6.000 U/min , 2 Werkzeugwechsler für 72 Werkzeugaufnahmen, Siemens 840 D , Heidenhain Meßsystem , 3D- Meßtaster Renishaw , BLUM - Werkzeugbruchkontrolle , Hedpfxsgb Rq Sj Aatjnk Späneförderer , Bandfilteranlage

Condition: used, Heißfolienprägemaschine / Hot Foil Stamping Gierlich P 4000 Hedpfxjv R S Uio Aatjnk Baujahr / Year 1989 - Serial-No. 8296 Druckleistung / Pressure max. 4000Kg Prägefläche / Embossing size max. 220 x 300mm Höhenverstellung / Height adjustment 50mm Sehr guter Zustand / Very good condition Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: like new (used), Year of construction: 2018, As-new horizontal sheet metal storage racks by Hakon Steel (2 units) Each rack comprises: 1x HR 400-200 3T/7+1 (lower section) Sheet size: 4000 x 2000 mm 7 pull-out drawers with drawer locking Load capacity per drawer: 3000 kg Usable drawer height: 110 mm Rack height: 1975 mm Hsdpfxsybbxpo Aatenk Rack width: 4520 mm Fitted with swing doors on the front and 1x HSR 400-200 3T/7 (upper section) Sheet size: 4000 x 2000 mm 7 cassettes (+top drawer) Load capacity per cassette: 3000 kg Usable cassette height: 110 mm Rack height: 2480 mm Rack width: 4520 mm

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, spindle speed (min.): 6,000 rpm, table width: 1,100 mm, table length: 4,200 mm, rotational speed (max.): 6,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Automatic universal head, 0.02 degree in both axes Hodpfx Aaow Ngd Tetjnk Machine will be refurbished in 2025

Condition: excellent (used), Year of construction: 2001, center height: 525 mm, workpiece weight (max.): 5,000 kg, grinding length: 4,000 mm, grinding wheel diameter: 1,060 mm, The machine underwent a retrofit in 2024. Control: Siemens Sinumerik 840D. Hjdpfxsw Ngm Uo Aatenk

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 20 40 27.07 / 207 - 090, type of input current: three-phase, Plasma cutting machine OMNICUT 4000 Control unit MS 100 Air extraction system Specifications: Rail length: 15 m Table length: 12.5 m Rail span: 4 m Table width: 2.6 m Plasma cutting unit HPR 130 Hnjdpfeyr Iguox Aatek Cutting thicknesses: Steel: 0.5 mm – 25 mm Stainless steel: 1 mm – 20 mm Aluminium: 1 mm – 20 mm Oxy-fuel cutting unit MSX 750, PCS 2100 Steel: 3 mm – 300 mm The machine has seen little use and is offered in full working condition, ready for operation.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, New machine - new design Successor to the STM 514 12-month warranty Advantages: + Robust, compact tabletop sheeter + Push-button operation + Suitable for all types of dough for rolling and rolling Hsdpeivdixofx Aatenk + Stainless steel tables can be folded up on the left and right + Scrapers can be easily removed without tools + Fast spare parts delivery within 1-2 business days Technical specifications: - Belt width: 475 mm - Roller width: 500 mm - Table length: 2055 mm - Roller adjustment: from 0.5 mm to 30 mm (depending on the product) - Speed: approx. 50 cm/sec - Motor power: 0.75 kW - Connection: 400 V - 3Ph - 50Hz - Protection: 16A CEE plug - Dimensions: --- Working position: 2055 x 940 x 535 mm (WxDxH) --- Rest position: 850 x 940 x 810 mm (WxDxH) - Net weight: 95 kg optionally possible at extra charge: - Machine equipped with original RONDO synthetic belts (to roll dough & marzipan or fondant) + €499 net The exchange of belts may extend the delivery time!

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, New machine - Rondomat 4000 Successor model to the SWL 6407 2-year warranty Advantages: + Robust, mobile dough sheeting machine with base + Equipped with stainless steel tables and stainless steel base + Easily movable, fitted with swivel castors and locking feet for stable positioning + Operation via push-buttons and reversing lever + Standard high-quality linen belts fitted + Suitable for all types of dough for sheeting and laminating + Integrated electric motor + Tables can be folded up to the left and right + Scrapers can be easily removed without tools + Machine comes standard with one hand crank Hnodpfxsivdlpo Aatsk + Hand crank supports on both left and right sides + Dough catching trays on both sides + Fast spare parts supply within 1-2 business days Available at extra charge: - Machine fitted with Original RONDO plastic belts + €799 net Conversion may extend delivery time if necessary! Technical data: - Belt width: 640 mm - Roller width: 660 mm - Table length: 3,320 mm - Roller gap adjustment: from 0.2 mm to 45 mm (depending on product) - Speed: approx. 65 cm/sec - Motor power: 1.1 kW - Electrical connection: 400 V - 3Ph - 50Hz - Fuse: 16A CEE plug - Dimensions: --- Operating position: 3700 x 1235 x 1200 mm (W x D x H) --- Rest position: 2150 x 1235 x 2170 mm (W x D x H) - Net weight: 240 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, New machine - new design Successor to the STM 513 12-month warranty Advantages: + Robust, compact tabletop sheeter + Push-button operation + Suitable for all types of dough for rolling and rolling + Stainless steel tables can be folded up on the left and right + Scrapers can be easily removed without tools + Fast spare parts delivery within 1-2 business days Technical specifications: Hjdpfeird Dyox Aatonk - Belt width: 475 mm - Roller width: 500 mm - Table length: 1560 mm - Roller adjustment: from 0.5 mm to 30 mm (depending on the product) - Speed: approx. 50 cm/sec - Motor power: 0.75 kW - Connection: 400 V - 3Ph - 50Hz - Protection: 16A CEE plug - Dimensions: --- Working position: 1560 x 940 x 535 mm (WxDxH) --- Rest position: 670 x 940 x 710 mm (WxDxH) - Net weight: 85 kg optionally possible at extra charge: - Machine equipped with original RONDO synthetic belts (to roll dough & marzipan or fondant) + €349 net The exchange of belts may extend the delivery time!

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, New machine – Rondomat 4000 Successor model to the SWL 6405 2 years warranty Advantages: + Robust, mobile sheeter on base frame + Equipped with stainless steel tables and stainless steel base + Easy to move, fitted with swivel castors and locking feet for secure positioning + Operable via push-buttons and reversing lever + Suitable for rolling out and laminating all types of dough + Supplied as standard with high-quality linen conveyor belts + Integrated electric motor + Tables fold up on both left and right sides + Scrapers can be easily removed without tools + Supplied as standard with 1 hand-operated winding handle + Mounts for hand winder on both left and right sides + Dough collection trays on both sides + Fast spare parts supply within 1-2 working days Optional at extra cost: - Machine equipped with original RONDO plastic belts + €699 net Please note: conversion may extend delivery time! Technical Data: - Belt width: 640 mm - Roller width: 660 mm - Table length: 2,720 mm - Roller adjustment: from 0.2 mm to 45 mm (depending on product) - Speed: approx. 65 cm/sec - Motor power: 1.1 kW - Electrical connection: 400 V - 3Ph - 50Hz - Protection: 16A CEE plug Hnedpeivdlhofx Aatek - Dimensions: --- Operating position: 3100 x 1235 x 1200 mm (W x D x H) --- Resting position: 1815 x 1235 x 1895 mm (W x D x H) - Net weight: 235 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, New Machine - Econom 4000 Successor model to the SSO 513 2-year warranty Advantages: + Robust, mobile dough sheeter with base frame + Equipped with stainless steel tables + Easy to move, with swivel castors and locking feet for stability + Operation via push buttons + Suitable for sheeting and laminating all dough types + Tables fold up on both sides (left and right) + Scrapers can be easily removed without tools Hnjdpfx Aewktlbsatek + Machine comes standard with one hand-operated crank + With dough catch pans on both sides + Fast spare parts supply within 1-2 working days Technical Specifications: - Belt width: 475 mm - Roller width: 500 mm - Table length: 1,660 mm - Roller adjustment: from 0.5 mm to 30 mm (depending on product) - Speed: approx. 50 cm/sec - Motor power: 0.75 kW - Electrical requirements: 400 V - 3Ph - 50Hz - Circuit protection: 16A CEE plug - Dimensions: --- Working position: 2000 x 940 x 1330 mm (W x D x H) --- Rest position: 755 x 940 x 1780 mm (W x D x H) - Net weight: 130 kg Optional (for an additional charge): - Machine equipped with original RONDO plastic belts + €349 net Retrofitting may extend the delivery time if applicable!

Condition: new, Year of construction: 2025, warranty duration: 24 months, New Machine - Econom 4000 Successor model to the SSO 514 2-year warranty Hjdpoivdknofx Aatenk Advantages: + Robust, mobile dough sheeter on base frame + Equipped with stainless steel tables + Easy mobility with swivel castors and lockable feet for stable positioning + Operation via push buttons + Suitable for rolling and laminating all types of dough + Tables fold up on both sides (left and right) + Scrapers can be removed effortlessly without tools + Machine is equipped as standard with one manual hand crank + With dough catch trays on both sides + Fast spare parts supply within 1-2 working days Technical specifications: - Belt width: 475 mm - Roller width: 500 mm - Table length: 2,055 mm - Roller adjustment: from 0.5 mm to 30 mm (depending on product) - Speed: approx. 50 cm/sec - Motor power: 0.75 kW - Electrical connection: 400 V - 3Ph - 50Hz - Circuit protection: 16A CEE plug - Dimensions: --- Operating position: 2500 x 940 x 1330 mm (W x D x H) --- Storage position: 850 x 940 x 1780 mm (W x D x H) - Net weight: 150 kg Optional at additional cost: - Machine equipped with original RONDO plastic belts + €449 net Conversion may extend delivery time!

Condition: new, Year of construction: 2025, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, Hedpfxog Avfks Aatsnk pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar-

Condition: used, 3 transmitter elements (clear width approx. 400 mm) 4,000 mm long, 1,700 mm high Warehouse location: Hedoymp Rwepfx Aatenk

Condition: used, Norte VS1000 CNC milling machine Spindle speed: 6,000 rpm X-axis: 4,000 mm Hnsdpfxoym Ebls Aatjk Y-axis: 1,000 mm Z-axis: 1,000 mm Tool holder: SK50 Control: Siemens 840 D Options: With chip conveyor With tool changer With documentation With tools

Condition: new, overall weight: 4,400 kg, total height: 310 mm, total length: 4,000 mm, total width: 1,500 mm, Clamping plates - T-slot plates Hsdstrli Rspfx Aatjnk 4000 x 1500 x 310 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this form we can produce an individual plate for you. Number of hookers: 5 Edge distance: 14mm Hook spacing: 270mm Hook width: 28mm Material: cast iron HT250. Flatness less than 0.12 mm. Surface processed according to DIN 876 / III

Condition: used, Year of construction: 1979, grinding diameter 630 mm grinding length 4000 mm centre height / mm weight of the machine ca. 32000 kg Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. Grinding Dimensions: 630 x 4000 mm Weight: 32,000 KG HS-Code: 84602910 Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. The 3M194 not only offers impressive dimensions but also incorporates Hnedpfjvm Dzaex Aatok innovative technology, ensuring top-notch results. With its reliable design and precise performance, this cylindrical grinding machine is ideal for processing a variety of workpieces. The precise control and versatility of the STANKO 3M194 make it the perfect choice for companies striving for the highest quality standards in metal machining. Trust in the proven technology of STANKO to optimize your manufacturing processes and achieve superior results. Invest in the future of your production with the STANKO Cylindrical Grinding Machine 3M194 - the perfect combination of performance, precision, and reliability. Contact us today to learn more about this outstanding grinding machine and how it can meet your manufacturing requirements.

Year of construction: 1990, condition: ready for operation (used), A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction roller diameter: 260mm, pressure roller diameter: 2500mm. 5) Crosslapper Autefa Topliner CL 4000/4002 - WebMax, year of construction: 2006, min. fineness range: 0.7dtex, fiber types: chemical/natural/regenerated/blends, max. web weight: 100g/m², max. web weight with crosslapper: 5000g/m², max. laying width: 3500mm, working width: 2500mm, max. laying speed: 130m/min, lapper lift: 100mm, machine dimensions X/Y/Z: approx. 3850mm/8800mm/2200mm. 6) Drafting unit, working width: 2500mm, machine dimensions X/Y/Z: approx. 1600mm/3650mm/1650mm. 7) Double needle loom Dilo CBF 31/HVSL 31, year of construction: 2007, max. working width: 3100mm, stroke frequency: 1375/min, needle beam stroke: 60mm, horizontal beam stroke range: 0mm-6mm, number of needles per 1m working width: approx. 15430, machine dimensions X/Y/Z: approx. 3350mm/5150mm/4500mm, weight: approx. 38000kg. 8) Web accumulator Suchy WOB 3200, storage volume: 40m³, web weight range: 50g-2000g/m², max. working speed: 40m/min, max. production speed: 20m/min, working width range: 1000mm/3000mm, roller top width: 3200mm, machine dimensions X/Y/Z: approx. 4300mm/5050mm/5300mm. 9) Slitting unit Suchy, year of construction: 2006, weight: approx. 250kg. 10) Climbing roll winder, winding roller diameter: 350mm, min. winding diameter: 3inch, max. winding diameter: 1500mm. 11) Edge trimmer Hepp-Schwamborn. 12) X-ray measuring device Protagon Q6. This is a complete and automated nonwoven fabric production line starting from fiber bales. Documentation available. An on-site inspection is possible. Expected to be available from the end of March 2026. Hnsdpfeymfc Asx Aatek