Used Ess Uniarc 5 for sale (65,557)

Year of construction: 1990, condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1990 Machine-No. 2559 pressing force: 2800 kN heating plates: 500 x 500 mm Lodpfen Sm Ayox Ab Tehc heating: electric distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Good, used condition. With CE-marking.

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: fully functional, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. Lodpfx Abjxc E Tro Tohc All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package. Price for the complete package 150000 € , pick up only, at D-36404 Vacha/Germany, or delivery in germany subject to additional fees.

Condition: excellent (used), Year of construction: 2005, Automatic hydraulic press Automax ES5-3000 with a 3000 kN compression force for testing, in excellent condition. Designed for use with cubes up to 200 mm and cylinders with a diameter up to 160 mm and height up to 320 mm. Equipped with an external frame for flexural tests with a capacity of 100 kN. Lhsdpfxoxpcuyo Ab Toc Year of manufacture: 2005.

Condition: used, machine/vehicle number: 008109, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Maximum panel thickness: 12 mm Operating Units: 9 nr Lhedpfx Abow Idc Do Tsc

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Lhedpfjwwaruox Ab Tsc Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: used, Reportedly unused Sinclair Stainless Fabrications approximately 15,000 litre capacity vertical 316L stainless steel fermenter/bioreactor with (4) zone limpet coil jacket. Unit has a welded dished top and bottom. Internal rated -1/+3barG internal operating at 0-159degC. Internal coils rated -1/+5barG and limpet coils rated -1/+5barG operating at 0-159degC. Mixer Drive = Nominal Speed: 100 RPM; Motor: 55KW 1500RPM 250 IE3 IP55 3PH Ljdpeyln E Rofx Ab Tjhc 230/400V 50HZ; Gearbox Input Coupling: Integral w/Gearbox; External Paint Finish: Standard Paint; Color: Blue RAL5005 Mounting = Arrangement: Structural Nozzle w/Flange Shaft Seal = Mechanical Seal: Custom Seal - No Bearing Balanced (AES CDM C/SiC/C/SiC-AFLAS(3) - Double Mechanical Seal. ) Mounting Flange = Flange Size: DN400 [16”]; Flange Class: CL-150; Flange Material: 316 Stainless Steel Face & Core Shaft = Shaft Diameter: 4-1/2”; Shaft Extension: 6754 mm; Shaft Material: 316 Stainless Steel Impellers = Impeller #1: 921 mm BT-6; Impeller #2: 959 mm W-4; Impeller #3: 959 mm W-4; Impeller #4: 959 mm W-4; Impeller Material: 316 Stainless Steel Mixer Options = Gearbox with Food Grade Lubricants Design Compliance = Machinery Directive 2006/42/EU Specifications: Capacity: 15,000 L Type of stainless: 316L Internal Pressure: -13 bar Internal Temperature: 0°C Jacket Pressure: -15 bar Jacket Temperature: 0°C Diameter: 1,800 mm Straight Side: 5,900 mm Legs/Lugs: Mounted on (4) legs Weight: 6720kg Dimensions: 2400mm diameter x 7500mm height

Condition: ready for operation (used), Year of construction: 2010, number of axes: 5, This 5-axis BIESSE ROVER C9.5 was manufactured in 2010. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), 25 vertical and 6 horizontal spindles, and a 5-axis electric spindle (11 kW HSK F63). It boasts high travel speeds (X/Y: 100 m/min, Z: 30 m/min) and a total installed power of 35.7 kW. If you are looking to get high-quality woodworking capabilities, consider the BIESSE ROVER C9.5 machine we have for sale. Contact us for more information. • Working Area: X=4600 mm, Y=1935 mm, Z=275 mm • Travel Speed: X-axis: 100 m/min, Y-axis: 100 m/min, Z-axis: 30 m/min • Vertical Spindles: 25 • Horizontal Spindles: 6 • Tool Changer: Revolver type with 8 positions, Chain changer Lhsdpfox Tka Uox Ab Tec • 5-axis Electric Spindle: 11 kW HSK F63 • Installed Power: 35.7 kW

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm Lsdjx D H Hcepfx Ab Tjhc • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • BH 42 L drilling head • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.

Condition: new, Year of construction: 2025, machine/vehicle number: YS501X, Die Kartonverschließmaschine vom Typ VOGEL YS501X ECONOMIC ist unsere Empfehlung speziell für eher große Kartonformate, welche in Serien verklebt werden Karton-Formate: Länge 150 – ∞ mm Breite 150 – 500 mm Höhe: 140 – 560 mm Technische Daten: Betriebsspannung 220 V CE-Kennzeichnung Zubehör: Zu unserem VOGEL-Karton-Verschließer-Programm bieten wir Laufrollen, Vor- und Nachlauftische, Rollenbahnen an. Unser Kartonverschliesser YS501X ECONOMIC ist eine günstige Lösung, wenn es darum geht Kartons in eher großen Formaten sicher zu verschließen. Durch zwei seitliche Förderbänder werden Ihre Kartons sicher durch den Kartonverschliesser befördert. Die Einstellung der Kartonbreite erfolgt mechanisch über eine Kurbel. Die Höheneinstellung ist bei dieser Maschine besonders leicht und schnell zu lösen, denn das obere Klebeaggregat muss nur entriegelt werden und kann dann einfach auf die jeweilige Höhe gebracht werden. Auf Grund der mechanischen Einstellung der Formate ist diese Maschine für Serienproduktionen gedacht, bei welcher eine längere Zeit hintereinander Kartons im Lodpfx Asylwplsb Tshc gleichen Format verschlossen werden sollen. Die Deckelklappen der Kartons werden vor dem Zuführen in die Maschine manuell niedergedrückt. Ausgelegt ist diese Maschine für Klebebänder mit 76mm Kerndurchmesser und 50 mm Breite. Wir empfehlen dazu den Einsatz von Maschinenklebeband mit mehr Metern je Rolle ( als bei Handrollen), so können Sie länger arbeiten ohne das Klebeband wechseln zu müssen! Es können gleichermaßen PP & PVC Klebebänder, wie auch umweltfreundliche Papierklebebänder genutzt werden. Die Klebeaggregate können leicht heraus genommen werden, um die Kleberollen zu wechseln. Ebenso kann dies aber auch genutzt werden, wenn Sie Kartons vielleicht nur oben zukleben wollen ( Stichwort: Automatikbodenkartons). Selbstverständlich trägt auch diese Maschine das CE Zeichen.

Condition: new, Year of construction: 2025, machine/vehicle number: YS501X-1, Die Kartonverschließmaschine vom Typ VOGEL YS501X ECONOMIC ist unsere Empfehlung speziell für eher große Kartonformate, welche in Serien verklebt werden Karton-Formate: Länge 150 – ∞ mm Breite 150 – 500 mm Höhe: 140 – 560 mm Technische Daten: Betriebsspannung 220 V CE-Kennzeichnung Zubehör: Zu unserem VOGEL-Karton-Verschließer-Programm bieten wir Laufrollen, Vor- und Nachlauftische, Rollenbahnen an. Unser Kartonverschliesser YS501X ECONOMIC ist eine günstige Lösung, wenn es darum geht Kartons in eher großen Formaten sicher zu verschließen. Durch zwei seitliche Förderbänder werden Ihre Kartons sicher durch den Kartonverschliesser befördert. Die Einstellung der Kartonbreite erfolgt mechanisch über eine Kurbel. Die Höheneinstellung ist bei dieser Maschine besonders leicht und schnell zu lösen, denn das obere Klebeaggregat muss nur entriegelt werden und kann dann einfach auf die jeweilige Höhe gebracht werden. Auf Grund der mechanischen Einstellung der Formate ist diese Maschine für Serienproduktionen gedacht, bei welcher eine längere Zeit hintereinander Kartons im Lhedsylwfaopfx Ab Tsc gleichen Format verschlossen werden sollen. Die Deckelklappen der Kartons werden vor dem Zuführen in die Maschine manuell niedergedrückt. Ausgelegt ist diese Maschine für Klebebänder mit 76mm Kerndurchmesser und 50 mm Breite. Wir empfehlen dazu den Einsatz von Maschinenklebeband mit mehr Metern je Rolle ( als bei Handrollen), so können Sie länger arbeiten ohne das Klebeband wechseln zu müssen! Es können gleichermaßen PP & PVC Klebebänder, wie auch umweltfreundliche Papierklebebänder genutzt werden. Die Klebeaggregate können leicht heraus genommen werden, um die Kleberollen zu wechseln. Ebenso kann dies aber auch genutzt werden, wenn Sie Kartons vielleicht nur oben zukleben wollen ( Stichwort: Automatikbodenkartons). Selbstverständlich trägt auch diese Maschine das CE Zeichen.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Versant 280 Press’ colour production system. Item for sale: 1 x Xerox Versant 280 Press with the following equipment: Includes E300 controller Includes A-CF03 paper deck Includes A-FN13 booklet finisher Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: approx. 557,431 pages Colour: approx. 430,279 pages Black: approx. 127,152 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. Lodpfxoyludmj Ab Tohc For more information, please feel free to contact us personally.

Condition: used, Electric Lift Table – Walkie Stacker, Pedestrian Pallet Stacker For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225 (lift2move) Serial No. 19153-HD Year of manufacture: 2010 Model No.: Rated load capacity: 225 kg Lift travel: 1770 mm Lift height: 2350 mm Lifting speed (unladen / laden): approx. 100 / 75 mm/s Load cantilever: 400 mm Chassis length: 1130 mm Underride height: 90 mm Underride length: 600 mm Chassis version (front / rear): Ø 80 / 150 mm (2 fixed castors / 2 swivel castors) Overall length: 1130 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Wired remote control with spiral cable and button for 2 lifting speeds Lhjdoflt Egepfx Ab Tec - Battery pack with quick-change system - Charge status indicator - 2 x 12 Volt, 17 Ah lead-acid batteries installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amp (mains voltage 230 V, 50 Hz) - Manually movable, steering castors with three-stage parking brake - Continuously height-adjustable handlebar - Load mounting flange as per EXPRESSO standard 380 x 50 mm / 4 mounting holes M10, spacing 100-120-100 mm Fitted lifting aid: Four-prong fork attachment, Expresso type, Rated load of lifting aid: 40 kg - Lifting aid manually swivelled by 90° (lockable only in 0° position) - Lifting aid laterally adjustable on linear guide by ±100 mm (locking only in center) - Width between support arms: 320 mm - Height between support arms (lockable at): 365 / 400 / 450 mm (max. opening without locking holes: 510 mm) - Depth between support arms: 150 mm up to stop bolt / 300 mm max. Total weight: 100 kg Good condition

Condition: used, Electric Loading Lift – Pedestrian Stacker, Tiller Stacker for ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 175 (lift2move) Serial No.: 19152 Year of manufacture: 2010 Type No.: Rated capacity: 175 kg Lift travel: 1090 mm Lift height: 1780 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Reach of lifting aid: 800 mm Chassis length: 1100 mm Underride height: 175 mm Underride length: 670 mm Chassis version (front / rear): Ø 120 / 150 mm (2 swivel castors / 2 swivel castors) Total length: 1220 mm Total width: 700 mm Overall height: 1950 mm Maximum height: 2870 mm (with lifting aid fully extended) Lhodoflt Efjpfx Ab Toc Motor power: 400 W Battery capacity: 24 V / 17 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 x Lead-acid batteries, 12 Volt, 17 Ah in battery pack - External charger 24 VDC, 3 Ampere (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load carriage double flange according to EXPRESSO standard, 2 pieces mounted on top of each other, each 280 x 50 mm / 4 mounting holes M10 Mounted lifting aid: Rotatable Roller Mount Expresso Type 04175470 Lifting aid load capacity: 70 kg Rotation via electric drive with stepless speed control Rotation range: 360° continuous Roller arms individually adjustable steplessly on linear guides Roller arm span min./max.: 1350 - 2050 mm (infinitely adjustable) Roller arm depth: 560 mm In the center of the roller arms is a workpiece holder (adjustment range 0 - 80 mm) Total weight: 150 kg good condition

Condition: used, Electric Load Lift – Pedestrian Stacker, Pallet Truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 175 (lift2move) Serial No.: 19153 Year of manufacture: 2011 Type No.: Rated capacity: 175 kg Lift travel: 1880 mm Lifting height: 2760 mm Lifting speed (unladen / laden): approx. 100 / 75 mm/s Lifting aid outreach: 730 mm Chassis length: 970 mm Underride height: 90 mm Underride length: 485 mm Chassis configuration (front / rear): Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length: 1220 mm Overall width: 600 mm Construction height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch Ledpjfr Izgsfx Ab Tohc - Wired remote control with spiral cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Charge level indicator - 2 pcs lead-acid battery 12 Volt, 17 Ah integrated in battery pack - External charger 24 VDC, 3 Amp (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Infinitely adjustable handgrip height - Load mounting flange according to EXPRESSO standard 280 x 50 mm / 3 mounting holes M10 spaced 110-110 mm Fitted lifting aid: Pivoting jib arm Lifting aid load capacity: 60 kg Pivoting range: ±30° (lockable only at 0°) Jib arm length: 600 mm - Steplessly adjustable load eye, hole diameter 30 mm Total weight approx. 100 kg good condition

Condition: used, Electric loading lift – pedestrian stacker, pallet stacker truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225P (lift2move) Serial No.: 19500S Year of manufacture: 2008 Type No.: Rated load capacity: 225 kg Lift travel: 1680 mm Lift height: 2200 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Lifting aid outreach: 861 mm Chassis length: 1020 mm Underclearance height: 90 mm Underclearance length: 600 mm Chassis design (front / rear): Ø 80 / 140 mm (2 fixed castors / 2 swivel castors) Overall length: 1400 mm Ledpjflt Edefx Ab Tehc Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Handheld remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge level indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in battery pack - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load pick-up flange as per EXPRESSO standard Special version: Lifting aid by GIESLER for radial fan SC-1000 CP XT (Tiger) - Lifting aid load capacity: 25 kg - Lifting aid can be swivelled 90° via manual hydraulic pump - Jaw opening between support jaws: 300 / 330 mm - Jaw opening between clamping rollers: 200 – 300 mm - Clamping via handwheel - Lifting aid net weight: 60 kg Total weight: 140 kg Very good condition

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads EXPRESSO type Lift & Drive 125 (lift2move) Series. No. 194679 Year of construction 2015 Type no. 1418242111 Nominal load capacity 125 kg Lifting distance 1450 mm Lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 530 mm Chassis length 890 mm Underride height 90 mm Underride length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Ledsflt Ebspfx Ab Tehc Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support U-profile for square according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm/ 4 M8 fixing holes at 50-60-50 mm intervals Mounted lifting aid: Special version from GIESLER LAM-DC conductor rail Load capacity of the lifting aid 40 kg Dead weight of lifting aid 24 kg Support rail can be moved sideways +-90 mm via linear guides (3 locking points left, center, right) Support rail can be swiveled +-38° (continuously lockable) Support rail with 2 clamps Distance between the clamps 550 mm Material clamping thickness 100 mm Material support dimensions W x D 650 x 155 mm Total weight 75 kg Very good condition

Condition: excellent (used), Offer consisting of: complete compressed air system comprising SCC Flexi 55kW screw compressor, air-cooled, SCC DRA 480 refrigerant dryer, only about 2000 load hours, compressed air tank 1000 litres (OKS brand), year of manufacture: 2021 Lhsdpfx Ajyl S Ebsb Tec

Condition: new, Year of construction: 2026, functionality: fully functional, Pressure 250 t Bending length 3100 mm Frame gap 2600 mm Control Cybelec VisiTouch 24 Stroke 300 mm Throat depth 500 mm Installation height 500 mm Rapid approach (down) 175 mm/s Bending speed 0-12 mm/s Total power requirement 22 kW Machine weight approx. 13,000 kg Dimensions 3900 x 2150 x 3360 mm Standard equipment: Basic features: - CNC control Cybelec Visitouch 24 - 6+1 axes: Y1-Y2-X-R-Z1-Z2 +V - Automated dynamic hydraulic crowning system: G-CS - Frame deflection compensation system – G-REFLEX - Backgauge system model GHP-4 - Servo-driven main motor - LED display on the ram for visualizing the backgauge positioning - Safety system: DSP AP+MCS - HAWE hydraulic system - CE standard compliance - Upper and lower tool clamping with PROMECAM mechanical system Lhjdsylwm Ropfx Ab Toc

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 5-Axis Machining Center Biesse C9.50 - Beam table – Material can be clamped with suction cups or hold-down clamps Dual tool magazine configuration – highly flexible for production Top magazine – Revolver type Bottom magazine – Chain carousel (additional saw blade for HSK mounting – spindle) 8 beam tables, supports 16 kW spindle Very large aggregate/saw unit Lhjdpfxjyl Uuxe Ab Toc Becker pump Year of manufacture: 2009

Condition: new, Year of construction: 2024, neu 2024 7321 prompt, Zwischenverkauf v Türkei 12500 € 216.96 € 1 11300 € 150 to horizontal verschiebbar 300 mm 1570 mm 280x200 mm 5 mm/s 10 mm/s 2630 mm 1000 mm 2480 mm 2100 kg Lhsdpfowiqp Uex Ab Tec horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: used, Year of construction: 2025, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Empty weight: 450 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 155 Ljdpfxsxixrhj Ab Tehc - Capacity diameter round [mm]: 50 - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2012, max. workpiece length 4600 mm profile spindle 1 Stück BIESSE ROVER C WMS 6.50 CNC Machining Center for Windows For sale on behalf of a customer, machine is still in operation ----- Biesse Rover C 6.50 WMS CNC Machining Center - Windows Machine with automatic loading and unloading system Manufacturer's Technical Specifications: ----- Working area: X: 4,600 mm Y: 1,535 mm Z: 230 mm Fixed milling and drilling units: ----- Main spindle ----- 1 milling unit, HSK F63, with C-axis Drilling and sawing units ----- Multifunction unit Saw unit Drilling head BH 9 with Drill Quick-Change System Tool Changer: ----- Total 66 slots: 1 x 22 pieces + 2 x 22 pieces in the "Flexstore" Lsdpfxjyif S Hj Ab Tjhc Change Units: ----- HSK F63 Angle Unit with 1 output (lock box) for horizontal milling HSK-F63 Angle Unit with 4 outputs (3+1) for horizontal drilling HSK-F63 Angle Unit with 4 outputs for horizontal milling or drilling Machine Table ----- Console table with 10 crossbeams, automatic positioning Control ----- XP 600 CNC Control Software: DIREKT CNC NC-HOPS 6.1 DXF interface BIESSE RM 850 remote control Further features ----- Biesse EPS automatic table Chip guide element Vacuum pump 250 m³/h Special workpiece clamping system for windows Chip conveyor belt CE marking Space requirement L x W x H: approx. 10,600 x 4,700 x 2,600 mm Machine including interchangeable units Machine without machining tools (Technical specifications according to the manufacturer - without guarantee!)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Lhedpfjwlbxlox Ab Tjc Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: excellent (used), Year of construction: 2015, Working range X 6,400 mm Lodpowlcqvefx Ab Tehc Working range Y 1,500 mm Working range Z 1,500 mm Number of milling spindles 1 Main motor Kw 13 kW Max rotation speed 24,000 rpm Tool fixing system HSK-F63 Tool change positions 8 Vertical drilling heads 20 Horizontal drilling tips X 4 Horizontal drilling tips Y 4 N.2 vacuum pumps of 360 m³/h Nesting Remote control BIESSE WORKS software Overall dimensions: 11004×5334 mm Weight 4900 kg

Condition: good (used), Load lifter / lifting aid, Expresso, Lift&Drive 85 – used - : Price ex location: €950 (net) Ledpeyhxlwjfx Ab Tjhc Manufacturer: Expresso Model: Lift&Drive 85 Year of manufacture: unknown Load capacity: 70 kg Charging voltage: 230V, 50Hz Battery voltage: 18V / AH Condition: good Available: immediately Location: Waltrop