Used Ess Uniarc 5 for sale (65,544)

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 379082, Single-column vertical turning lathe | Schiess-Froriep 14 DKE 1250 The machine was overhauled in 2015 by Matschuk, recently cleaned and is in good condition. - Table diameter: 1,250 mm - Swing diameter: 1,500 mm - Turning height: 1,250 mm Ihodpfxeyfurqs Abrsu - Siemens control system type 840 Dsl - Tool holder Inspection is possible at any time by prior appointment.

Condition: used, machine/vehicle number: 008338, X axis working area: 4600 mm Y axis working area: 1935 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Iodpfx Abex A Tkxsrehu Total number of drilling spindles: 31 Total number of tool changer positions: 37

Condition: good (used), Year of construction: 2020, Biesse Rover K FT 1531 CNC Router.. YOM: 2020. £18,500 + VAT for UK Customers. This machine has an 9Kw HSD Electro spindle coupled with an automatic 9 x place tool changer. Whilst there is no drill block, the machine can use the router spindle to drill or cut holes as required. 2 x Vacuum Pumps to secure your workpiece onto the machine bed. Two Hold down rollers are positioned to assist (Especially with Plywood). Automatic tool length setting device. Biesse Suite B3 is installed to the machine. Manually load the machine with your sheet material (1560mm x 3100mm) load your programme and the machine will Router the nested shapes as programmed. With the auto outfeed device, the machine will push the completed parts from the work zone onto the outfeed conveyor. It will then return to the home position and Vacuum the working bed at the same time, ready to go again. Overall footprint Length = 9458mm x Width = 4756 x Height = 2570mm Maximum component thickness 90mm (Minimum 4mm). The machine will be disconnected and moved on Friday 13th Feb. It will be put into secure storage. Isdpfeyhzqpox Abrjhu Loading is included to your own transport. UK Delivery and Installation can be arranged at cost.

Condition: good (used), Year of construction: 2000, Capacity Kg 15000 Table Length 400 mm Table Width 300 mm Hole in table 150 mm Ihodpfx Asyc R Uiebrju Working height 280 mm Throat 2170 mm Stroke 50 mm Ram adjustment 4 - 80 mm Hydraulic Clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Length:1500mm Width:1500mm Height:2100mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, table width: 300 mm, table length: 400 mm, pressing force: 15 t, Hydraulic clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Note in the Neck / Throath machine is repaired ! Only EUR 5500 Capacity Kg: 15000 Table Length: 400mm Table Width: 300mm Hole in table:150mm Working height:280mm Throat: 2170mm Stroke: 50mm Ram adjustment:4 - 80mm Length: 1500mm Width: 1500mm Height: 2100mm Weight: 1200kg Iodoyc R Nmopfx Abrshu Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: N2205881, GEM 520 CARTON SEALER WITH SIDE DRIVE BELTS FOR UNIFORM CARTON SIZES CARTON DIMENSIONS: - Length: min. 150 mm - max. ∞ - Width: min. 100 mm - max. 520 mm - Height: min. 100 mm - max. 520 mm TECHNICAL DATA: - Drive & guide belts: vertical - Carton size adjustment: manual Iedsykuk Ropfx Abrshu - Sealing unit: bottom & top - Standard version: T22 / T23 - Tape width: from 38 to 50 mm depending on unit - Adjustable tension - Max. tape roll diameter: 360 mm - Tape roll core: 76 mm - Power supply: 400V, 3-phase, N, PE - 50/60 Hz - Consumption: 0.25 kW - Protection rating: IP 54 - Working environment: +5°C to max. +35°C - Conveyor speed: 22 m/min - Average output: 1,000 cartons/hour - Working height: 650 mm - Weight: 144 kg - Machine dimensions (L x W x H): 1,170 x 880 x 1,450 mm The illustration may show options subject to a surcharge.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: N2205881, GEM 52 CARTON SEALER WITH SIDE DRIVE BELTS FOR UNIFORM CARTON SIZES CARTON DIMENSIONS: - Length: min. 150 mm - max. ∞ mm - Width: min. 100 mm - max. 500 mm - Height: min. 100 mm - max. 500 mm TECHNICAL DATA: - Drive and guide belts: vertical - Carton size adjustment: manual - Sealing unit: bottom & top - Standard version: T22 / T23 - Tape width: from 38 to 50 mm (depending on unit) - Adjustable tension - Max. tape roll diameter: 360 mm - Tape core diameter: 76 mm - Power supply: 400V, 3-phase, N, PE - 50/60 Hz - Power consumption: 0.25 kW - Protection class: IP 54 - Operating environment: +5°C up to max. +35°C - Transport speed: 22 m/min - Average output: 1000 cartons/hour - Working height: 650 mm - Weight: 90 kg - Machine dimensions (L x W x H): 1,170 x 880 x 1,750 mm The illustration may show optional features subject to additional charges. Ihjdoykukwspfx Abrou

Condition: excellent (used), Compressor CompAir L 75 Isdpfoh U R Rwox Abrohu operating hours approx. 3100 h (load hours) was used as reserve compressor volume flow 10,25 m³/min Motor power 75 kW Very good working condition, directly from production!!!

Condition: used, Year of construction: 2007, turning diameter 600 mm swing diameter 680 mm Ijdsv Rrq Dopfx Abrohu turning height 600 mm z-axis 500 mm x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V frequency 50 Hz control Siemens 840 D pl total power requirement 140 A weight of the machine ca. 18 t dimensions of the machine ca. 6,5 x 3,8 x 4,20 m

Year of construction: 1987, condition: used, 4 pcs. rope pulleys for counter weight of a FB 225 Iodpfxod Ig Uys Abrjhu

Condition: used, System: Used chamber filter press Ihsdowqyf Iepfx Abreu Type: Passavant Application: Sludge dewatering Design: Bridge beam Year of manufacture: 1972 Filter plate size: 1200x1200 Number of plates: 59 plus head and end plate Filter plates: PP Filter cloths: optionally available, to be matched to the medium Filter area: approx. 270 m² Press volume: approx. 1700 dm³ Filter pressure: approx. 15 bar Pump technology: optional Purchase or rent: Inspection of the systems by arrangement at our facility.

Condition: used, System: Chamber filter press used Type: Passavant Field of application: Sludge dewatering Design: Overhead beam Filter plate size: 1500x1500 Number of plates: 160 pieces Filter plates: PP Filter cloths: optionally available adapted to the medium Filter area: approx. 614.5 m² Isdpfxowqyf Us Abrshu Press contents: approx. 8400 dm³ Filter pressure: approx. 15 bar Pump technology: optional Purchase or rental: Inspection of the system by arrangement at our site.

Condition: excellent (used), Biesse Stream 5.5 A Edgebander Mileage: 246,000 m Top pressure belt, fluids Pre-milling cutters, Glue application, Iedoxxlqvepfx Abrshu Pre-melter for PUR adhesive The glue pot is equipped with a glue drain Pneumatic pre-cut guillotine, Pressure rollers fluids Flush trim saws, Top and bottom trimming unit with straight cutters Top and bottom multi-cutter trimming unit Two corner rounding units Fluids Profile scraper (multi R1-R2), Cleaning fluids Flat scraper, Polishing unit, The machine is equipped with NC control for routers and a pneumatic package, Max workpiece height 60 mm, Max edge banding thickness in roll: 3 mm, Feed rate: 12, 18 and up to 20 m/min The machine is in very good condition.

Condition: good (used), pressing force: 1,250 t, Pressing force: max. 1250 t Width: 585 mm. height max. 480 mm. Stroke: max. 355 mm. Weight: 7200 kg. Iodpfxjyiumce Abrehu

Condition: used, Year of construction: 2014, Kannegiesser belt conveyor GF 6250-680/600 RA1103 Make: Kannegiesser as good as new, exhibition machine Year of construction 2014 Ihedotvb Iijpfx Abrou Conveyor length (FL): 6,250 mm Belt width (GB): 600 mm Nominal/outer width (NB): 680 mm Constant conveying speed: v=0.5 m/sec. Electrical data: 380V 0.25kW without control/connections to upstream and downstream conveyors Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one or both sides Frequency inverter for stepless speed control Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2014, Belt conveyors GF 2250-680/600 with 2 x 90° pushers (from slides) Make: Kannegiesser like new, showroom machine Year 2014 Length: 2.250 mm Belt width: 600 mm Total width: 680 mm incl. 2 piece pneumatic 90° off valves Wxh = 550 x 320 mm incl. 2 PCs. supports, height OK belt + 1000 mm Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihsdjk Aa D Eepfx Abrou Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2018, Kannegiesser belt conveyor Belt conveyor GF 1750-880-800 RA1306 Technical data: Conveying length (NL): 1750 mm Framework width (NB): ca 880 mm belt width (GuB): 800 mm Height/band run (BH): 420 mm +/- 100 mm Number of support feet: 2 pieces Load (kg/m): 75 kg Conveying speed: kontact us Electrical data: 400 V / 50 Hz / 0,75 kW Year of construction: 01/2018 Not the right one for you? On our website you will find more articles or simply contact us. All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Ihodpoukkq Eefx Abrsu Your specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 1988, grinding length: 400 mm, grinding width: 154 mm, Heidenhain visual display Optidress Facstor diamond dresser Travel 400 x 154 mm Magnetic chuck 350 x 150 mm Grinding wheel covers Ihodeyh N Tljpfx Abreu

Condition: used, machine/vehicle number: 008030, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Ihjdpjwvq Hgefx Abrsu Operating Units: 8 nr

Condition: used, machine/vehicle number: 006370, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Iodpfxol Txw He Abrjhu Maximum panel thickness: 60 mm Operating Units: 12 nr

Condition: used, machine/vehicle number: 008011, X axis working area: 6200 mm Y axis working area: 1935 mm Working Table: Pod and Rail Main Electrospindle power: 10.5 KW Number of controlled axes: 4 axes Total number of drilling spindles: 40 Total number of tool changer positions: 22 Ihodpfx Aowu Af Ejbreu

Condition: used, machine/vehicle number: 007645, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Ihedpfswuz Niex Abreu Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h The price refers to one line (exstruder+press) Ihsdjtxinaepfx Abrsu

Condition: used, Year of construction: 2017, x-travel 5850 mm y-travel 2500 mm z-travel 1000 mm Control 840D sl feeds x- + y-axis 20 m/min feeds z-axis 20 m/min acceleration 5 m/qs spindle drive - main spindle 60 kW spindle turning speed - stepless 24.000 U/min max. torque on the working spindle 87 Nm tool taper HSK-A63/F80 c-axis +/- 360 grad a- axis +/- 100 grad tool changer 20 stück coolant tank 2300 l surface area 6.000*2.500 mm number of T-slots 18 flute distance 125 mm dimensions of the machine ca. 14,8x7,3x5,8 m Machine table Width 2,500 mm Length 6,000 mm Number of T-slots 20 Distance of T-slots 125 mm Dimensions of T-slots 18H8 mm Max. table load 8,000 kg Travels Cross rail: X axis 5,850 mm Cross slide: Y axis, horizontal 2,500 mm Z axis, vertical 1,000 mm Feeds X-, Y- and Z-axes Feed rate 20 m/min Rapid traverse rate 45 m/min Acceleration 5 m/s² Vertical Slide Cross section 560x420 mm Motor spindle Drive power S1 (100% ED) 60 kW Max. speed 24,000 rpm Max. torque 87 Nm Tool interface HSK-A63/F80 C-axis Swivel range ±360 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm A-axis Swivel range ±100 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm Total dimensions Length 14,800 mm Ijdpfeycln Dex Abrshu Width 7,300 mm Height 5,800 mm

Condition: used, machine/vehicle number: 007686, X axis working area: 3765 mm Ihjdpfx Abju Tliyjrsu Y axis working area: 1560 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 18 Total number of tool changer positions: 12