Used Exhaust Purification System for sale (38,553)

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 2407001, functionality: fully functional, operating hours: 1,000 h, power: 4 kW (5.44 HP), filter area: 10.5 m², noise level: 75 dB, total height: 1,735 mm, total length: 1,580 mm, total width: 550 mm, overall weight: 182 kg, nominal flow rate: 460 m³/h, negative pressure: 240 Pa, The unit was designed and installed as a single-station extraction system for a workshop area. It has hardly been used in the past 10 years, as the workshop concept has changed. The system is currently powered and can be inspected. Dismantling and collection must be carried out independently. Upon purchase agreement, the electrical connections will be disconnected from the central control cabinet. All system and installation documentation is available. Nodsyf Az Topfx Acnscu

Condition: used, This listing is for 1 of 3 Millipore Rios-DI UV Water Puerification System RiOs-DI® 3 UV Water Systems with built-in 254 nm bactericidal UV lamp easily and economically produce up to 15 L/day of consistent-quality Type 2 pure water from tap water. A combination of reverse osmosis (RO) technology and deionization (DI) resins delivers water with high resistivity ( > 10 MΩ·cm) and low TOC (< 30 ppb) whose quality surpasses that of service DI or distilled water UV lamp helps ensure optimal water quality for bacteria-sensitive applications Pure water flow rate of >2.4 L/hr Integrated 6-L storage reservoir Avoid the drawbacks of other purification methods such high lab space demands for resin bottles or distillation equipment; heavy maintenance; lack of quality monitoring; and in the case of distillation, high energy and water use Ncjdpfx Acoxzhcmjneu

Condition: new, Equipment: dust extraction, For all industrial processes where dust and coarse particles are generated, the clean air dust extractors of the AL-KO CLEAN UNIT D series are the right choice. Thanks to their powerful fans and highly effective filter cartridges, these mobile extraction units ensure clean air in metalworking as well as in the plastics, food, and chemical industries. Functionality: Dust and coarse particles are extracted directly at the machine or via capture hoods and conveyed through a suction line to the inlet of the AL-KO CLEAN UNIT D. In a generously dimensioned pre-separation chamber, coarse particles are separated. The downstream filter cartridges of dust class 'M' filter out the remaining fine dust particles. The differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges even during continuous operation. Venturi nozzles on the filter cartridges enhance the cleaning effect, ensuring consistent suction power and a long filter service life. The collected dust is gathered in an easily maneuverable container with an integrated collection bag, enabling low-dust disposal. The purified air is returned to the workspace via the top of the unit. Applications: - Direct extraction of dust and chips - Suitable for single or multiple workstations - For connection to machines, extraction tables, booths, and ducting - For metal and plastics processing and many other industries - For grinding, polishing, filling processes, and more Advantages: Ncjdpfx Acjwwkrfsnsu - High suction performance due to an efficient fan and cleanable filters with a long service life - Suitable for a wide range of applications - Extremely quiet thanks to highly effective sound insulation - IE3 motors for high energy efficiency - Plug-and-play

Condition: new, The devices from the AL-KO POWER VAC series are used wherever high suction power and a large air volume flow are required. Typical applications include chip extraction from saws in window manufacturing or direct extraction of milling chips on multi-head welding machines. Functionality: A negative pressure of up to 10,000 Pa enables quick and safe extraction of chips and dust directly at the source. This ensures smooth production processes and consistently high product quality. The looped filters provide a high separation efficiency for both coarse particles and fine dust. It is also possible to connect a ductwork system to link multiple processing machines to the extraction unit. AL-KO POWER VAC devices are equipped with the proven AL-KO OPTI JET filter cleaning system and come standard with a control system featuring an integrated frequency inverter. This allows extraction performance to be adjusted at any time to meet operational requirements. Applications: - Cleaning suction of floors, machinery, and workstations in industrial and craft settings - Extraction from hand-held processing machines during grinding, milling, sawing, and deburring - Collecting dry dust up to dust class ST1, direct extraction from small processing and work machines Advantages: Nsdpfxewwt E Ue Acnscu - High suction performance up to 10,000 Pa negative pressure - Optimal filter cleaning with jet pulse cleaning (AL-KO OPTI-JET®) - CLEAN dust barrier for improved cleanliness and health protection - Compact, modular design for minimal space requirements - Energy savings with standard frequency inverter for precise adjustment of extraction performance - Low operating noise – integrated silencer and sound-absorbing elements enable installation directly in the work area

Condition: as good as new (ex-display), Exhibition Machine For sale is our Felder RL-200 clean air extraction unit from our showroom, with a maximum air flow of 4,000 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical Data: - H3 dust-tested - Extraction connection diameter: 200 mm - Extraction possible on both right and left sides - Automatic chip shaker Njdpfxexdkzqe Acnscu - Steel impeller - Max. air flow 4,000 m³/h - Minimal space requirement: 1,775 x 898 x 2,005 mm (L x W x H) - Year of manufacture: 2022 - Machine No.: 31.04.114.22 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-L0CE0

Condition: new, Year of construction: 2022, operating hours: 27 h, Brand: ABICOR BINZEL Type: xFUME ADVANCED Year of manufacture: 2022 Quantity: 6 units Operating hours: 27 Manufacturer: ABICOR BINZEL Ncsdpjxgnidefx Acneu Model: xFUME ADVANCED Number of connections: 2 × Ø 60 mm Motor power: 2 × 0.8 kW Vacuum: approx. 16,000 Pa Filter: PTFE cartridge, efficiency ≥ 99.95% Filter cleaning: pulse-jet with compressed air Auto start/stop function: yes (current clamp) Dimensions: approx. 370 × 370 × 940 mm Weight: approx. 40 kg Mobility: transport casters

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a Felder RL-160 clean air extraction unit with a maximum air flow rate of 3,200 m³/h. The extraction unit is in excellent condition and has been inspected and serviced by our specialists. (Fully functional) Technical data: - Max. air flow rate: 3,200 m³/h - Filter surface: 10 m² - Extraction connection Ø: 160 mm - Manual filter cleaning - H3 dust tested Njdpfjwp Rgmox Acnecu - Year of manufacture: 2020 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: excellent (used), Fan motor 15 kW Inlet 35 cm, outlet 35 cm Fan motor 3 kW, inlet 20 cm, outlet 20 cm Height 520 cm Width 200 cm Length 240 cm Hot air return pipe Nedpfxex N Scvj Acnecu Length 570 cm, width 55 cm, outlet 80 cm 3 pipes with magnets

Condition: used, Offered: Universal Exhaust Silencer. Suitable for various brands. Overall length: 689 mm, diameter: 256 mm, 2x pipe: 102 mm. M100048 A P PARTS 3669 AG CHEM EQUIPMENT WR37235 AGCO WR37235 AMERICAN AUGERS 48BM5123 Ncjdsuuqhxspfx Acnou AP EXHAUST PRODUCTS INC 3669 APE INDUSTRI AB 3669 ARDCO ENE0004 ASTEC UNDERGROUND 306245207 BADGER 78103131 BARBER-GREENE 29H77 CASE/CASE IH S505881 CENTURY II 27Q334 CHARDONNET 7410004800 CHRYSLER 2907822 CLARK 1513792 CRANE CARRIER 21042 CUB CADET 549472C1 DART MTM100048 DITCH WITCH 196332A DRESSER 101877 DROTT 505881 EAGLE TRUCK PRODUCTS E206 FMC 2236408 FORD D3HS5230GA GALION D101877 GEHL 41889 GINAF OG0000017213 GROVE 7642000009 HEAVY DUTY MFG 30015 INGERSOLL RAND 90600424 INSLEY 520340 INTERNATIONAL DCM100048 JLG 3220049 KOEHRING 125656 KOMATSU 101877 LOESING 22038 MANITOWOC 7642000009 MI-JACK 33170033 MINNPAR M6002355 NELSON 86168M NEOPART GH0201001 NEOPLAN EH0201001 P & H 27Q334 PACCAR 0561649 PETTIBONE 0RO23180090 RIKER 10024 SANDVIK 04710300 SICARD 00561649 STEMCO 1909887 SULLIVAN PALATEK TAMROCK 4710300 TEREX 125672 TOWMOTOR 680401 VERMEER 283389001 VOLVO G695424 WALGAHN-MOTORENTECHN 00810325 WALKER MANUFACTURING 21833 WHITE 027076545 = Further information = Condition: Used Part suitable for: Ginaf Reference number: M100048 / OG0000017213

Condition: good (used), Year of construction: 2023, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in excellent condition and has been inspected and refurbished by our professional staff. (Fully functional) Technical data: - Max. airflow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm Nodpfsxnxm Nex Acnecu - Automatic filter cleaning - Antistatic filter - H3 dust tested - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: clean air unit, extraction unit, dust extraction, clean air, RL Reference: R-A0117

Condition: as good as new (ex-display), functionality: fully functional, Demonstration machine For sale is our Felder RL-140 clean air extraction unit from our showroom, with a maximum air volume flow of 2,500 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical data: - H3 dust-tested - Extraction connection diameter: 140 mm - Extraction can be configured for right or left side - Manual chip shaker - 10 m² filter area - Max. air volume flow: 2,500 m³/h - Minimal footprint: 1,040 x 898 x 1,940 mm (L x W x H) The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Ncjdpfx Acsxdkw Esnou Reference: R-A0117

Condition: as good as new (ex-display), Year of construction: 2023, Exhibition Machine Ncjdjxd Aitspfx Acnou For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air volume flow of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our specialist staff. (Fully functional) Technical data: - H3 dust tested - Residual dust content < 0.1 mg/m³ - Max. air volume flow 1900 m³/h - Chip collection volume 200 litres - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117-102

Condition: used, functionality: unexamined, machine/vehicle number: Infinity GPS-4, Used Aeronex Infinity GPS-4 Gas Purification System Manufacturer: Aeronex Inc. Model: Infinity GPS-4 Description: CDA Gas Purification Cabinets / Auto-regeneration System / Purifiers Max Flow: 130 SLM Max Pressure: 150 PSIG Ncodsxn Nc Uopfx Acneu Filtration: 0.003 Micron 220V (EU-standard)

Condition: reconditioned (used), Year of construction: 2020, machine/vehicle number: W20-0648-01, functionality: fully functional, Kiekens mobile dust extractor, type: DMF1258M-B1Z22, number: DM1200000, year of construction: 2020, 400 V, 3 Ph, 50 Hz, 16 A, 2.2 kW, weight: 330 kg, dimensions: 800 mm x 950 mm x 2100 mm, serial number W20-0648-01. The dust extractor was completely cleaned and checked. Dustmaster 1200 The Kiekens Dustmaster DM1200 series is designed to quickly and effectively extract (fine) dust. By applying the Kiekens K-series modular concept, the Kiekens Dustmaster DM1200 series can be widely used. The DM 1258 is designed for a variety of extraction processes, in either fixed, centralised or mobile applications, for: ƒ grinding / milling / polishing ƒ sandblasting / sanding , cutting / routing, ƒ packaging / mixing ƒ welding. ■ Extraction of powders, chips and fumes including: ƒ metals ƒ plastics / synthetics ƒ food / pharmaceutical ƒ rubber / leather ƒ wood ƒ others ■ A 2m or 3m extraction arm for variable extraction movement is optional. Principle of operation and benefits: The dust-loaded air enters the Dustmaster through the Ø160mm inlet via a hose or extraction arm (optional upon request). o The elbow arrests dust movement, and the tangential inlet causes a cyclonic effect to enhance the separation of the dust from the air stream. p The heavier dust particles are separated from the air stream and collected in the oversized 120 litre dust container. The large volume enhances dust settlement and allows longer operations. q The air streams upwards towards the powerful 2.2 kW industrial fan, which produces high suction performance. r The lighter dust particles are collected on the large high efficiency M class 5.8 m2 envelope (or 8.8 m2 cartridge) filter, with DM 1258M (ENVELOPE FILTER) ƒ Heavy-duty polyester needle felt (PNF) with Teflon coating, envelope-type filter design ƒ High efficiency, M class. Ncedpfxovccc Io Acnou Motor starter with phase indication lamp ƒ Filter monitoring pressure gauge; Filter cleaning handle for DM 1258 (motorised option available) High capacity 120 litres dust container provides high dust handling capacity. ƒ Castors for easy movement ƒ Detachable with simple release lever ƒ Special versions for the explosion zones 2 (gas) and 22 (dust) are available. Other zones and earthed options on request. Disposable bags can be used to line the container For the Romanian companies, there is the possibility of financing leasing in instalments with a minimum of 40-50% down payment. Price 4.200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten /Subject to errors, changes and prior sale /Ne rezervăm dreptul la greșeli, modificări și vânzare. We speak English. /Wir sprechen Deutsch. / Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2011, Extraction system Manufacturer: Höcker-Polytechnik Model: EA 160 Year of manufacture: 2011 Nominal air flow: 1,500 m³/h Max. air flow: 2,750 m³/h Pressure loss: 2,800 Pa Power: 3 kW Filter cleaning: Mechanical – Electric Ncsdpfxsyb Rq Us Acnou Extraction connection: 160 mm Weight: approx. 270 kg

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) Ncodpfx Aodrtalocnsu each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) Ncjdpfxjlxyhfo Acnju each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Year of manufacture 1997 Volume flow 2950 m³/h 200 mm suction nozzle Motor 3.7 KW, 400 Volt Technically in very good condition Ncjdpfx Asv A Rv Ajcneu

Condition: good (used), Year of construction: 1998, Intake nozzle diameter: 140 mm Filter area: 9.6 m² Max. air flow rate: 1,330 m³ Min. air flow rate (V min): 1,108 m³ Motor: 3 kW Dimensions (L x W x H): approx. 1,700 x 800 x 2,025 mm Ncodoyfmxcopfx Acnsu All information provided without guarantee. Data taken from a brochure.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 7,880 m³/h, filter area: 39 m², total height: 2,816 mm, total length: 3,999 mm, total width: 1,367 mm, overall weight: 1,550 kg, compressed air connection: 5 bar, * Mobile dust extractor – High-quality extraction technology for flexible applications • Mobile, robust dust extraction system Suitable for indoor and outdoor use – ideal for workshops, construction sites, and temporary production areas. Ncedpjwku Iqjfx Acnsu • Particularly stable and high-quality construction Larger dimensions than standard devices – designed for long-lasting, professional continuous use. • Unique selling point: Mechanical-pneumatic filter cleaning ✓ Most efficient cleaning method on the market ✓ Low-maintenance, compressed air-operated without electronics ✓ Lowest energy consumption compared to conventional systems • Compact, sophisticated design Allows easy connection to: o Briquetting presses o Decoupling locks o Containers or conveyor systems • Plug-and-play delivery No installation required – ready for immediate use • Suitable for various materials Wood, plastic, mixed dusts, and much more

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 22924, Exhaust Air Dust Extraction System Dimensions of suction unit: Length: 1,100 mm Width: 1,100 mm Height: 1,950 mm Dimensions of filter housing: Diameter: 900 mm Height: 1,400 mm Dimensions of control cabinet: Ncsdpfx Acsv Scfujnsu Width: 400 mm Height: 600 mm Depth: 300 mm The exhaust air and dust extraction system has already been dismantled and is ready for collection.

Condition: used, functionality: fully functional, Exhaust Air Dedusting System Height: 4300 mm Width: 3000 mm Depth: 1300 mm Base frame dimensions: approx. 1750 mm Upper part dimensions from flange to motor cover: approx. 2450 mm Exhaust air box on top of motor cover: approx. 400 mm The exhaust air and dedusting system is equipped with a new motor, which we newly installed in September 2025. The system has already been dismantled and is ready for pickup. Ncjdpfxsxq Epvo Acnju

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 3 chip collection bags of 175 liters each Suction nozzle 200 mm Airflow volume 3,300 m³/h Motor power 3 kW Filter area 3 x 2.2 m² Nsdpfx Acjxvxnconocu The extraction unit was used once on a rental basis

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total height: 3,934 mm, The device has been dismantled and brought from Germany. It is currently located in a warehouse in Poland. Nedjx A It Ijpfx Acnocu

Condition: ready for operation (used), Year of construction: 2014, Spänex SMU 6000.1 Njdpfx Acexlk Tvjnocu Extraction diameter: 300 mm Motor power: 7.5 kW H3 tested 2 bins of 165 l each Space requirement: 2710 x 900 x 1965 mm Price: 10,000.- Condition: Function tested