Used Feeding Trolley for sale (12,182)

Condition: like new (used), Trolleys for icombi Rationa. 15 GN 1/1 Used several times Lajdpfx Asvbvi Segzjk

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys Ljdpfx Aowpf Ixjgzeak -Transport trolley: with steel plate -Platform: 900 x 900 mm with hole Ø 50 mm -Design: 2x swivel castors with brake, 2 fixed castors -Load capacity: kg -External dimensions: 900/900/H255 mm -Own weight: 62 kg

Year of construction: 2018, condition: used, For sale is a fully functional used screw conveyor with a screw diameter of 50 cm. The device has operated for several months in a line feeding vegetables to a peeler. Laedpfx Ajxnrr Ssgzjk SCREW CONVEYOR Type PSL.U500/1.8 • Device intended for feeding vegetables into the peeler infeed hopper • Infeed hopper adapted for manual feeding, H=800 mm • U-section trough, 500 mm; Length approx. 2700 mm • Discharge height to peeler infeed approx. 1800 mm • Cleaning port in the lower part of the trough; Operating angle approx. 45° • Bearings mounted outside the working section; Lower shaft sealing with packing • Structure mounted on adjustable feet and wheels • Feeding speed adjustable by frequency inverter, external potentiometer on the control panel • Acid-resistant (stainless steel) control panel mounted according to arrangement • Electrical supply: Power 2.2 kW, ~3x380 VAC, 50Hz

Condition: good (used), I will sell a heavy-duty, hydraulically adjustable transport trolley. Price is for 1 pc. Lodjv Uinbopfx Agzeak

Condition: good (used), Year of construction: 1997, Load capacity: 2200 kg. Max. loading height: 1600 mm. Available: 10 pieces. External dimensions: Width: 1800 mm. Height: 2020 mm. Lodpfox Hqn Sjx Agzoak Depth: 900 mm. Weight: 130 kg. Condition: good, second-hand.

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Laodpfxjmqty Ue Agzsk Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 250.713, Net weight 92 kg Load capacity 600 kg Stackable: 3 units External dimensions: 2500 mm width, 1150 mm depth, 2300 mm height Wheels – white polyamide, diameter 100 mm. Laedpfx Ajxvaa Tjgzsk The trolleys can be stacked without load. Number of pieces: 500 Transport can be arranged within the EU.

Condition: good (used), Feeding control, controller, level controller, control -Manufacturer: H. Grote Stall- und Melktechnik, Futtersteuerung -Type: TF 38/50 Lodpfjxyf I Rsx Agzsak -Dimensions: 220/120/H250 mm -Weight: 2.4 kg

Condition: used, machine/vehicle number: 007965, Max. panel width: 1300 mm Max. panel length: 2500 mm Laedpfx Ajw Ic Ryjgzsk Max. panel stack height from the ground: 1600 mm Lifting capacity: 200 Kg Work capacity: 8 Cycles/min Movement system: suction cups.

Year of construction: 1998, condition: good (used), Brand Hema Type Ledpfx Agsnyiliozoak UH900 Year 1998 Serial number 910085 Saw blade size L 6550 mm Saw blade size B 80 mm Electrical connection 380 V Dimension L 6000 mm Dimension B 2600 mm Dimension H 3400 mm More information in the attached .pdf file

Condition: good (used), Load capacity: 2000 kg. Ljdpjx Hqh Eefx Agzsak Max. loading height: approx. 2000 mm. Available: 4 pieces. External dimensions: Width: 1800 mm. Height: 2150 mm. Depth: 900 mm. Weight: 140 kg. Condition: good, second-hand.

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. Laedpfx Aemqty Rogzok We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Lagarde 4 trolley retort. Being removed from factory this month (August 2024). Ledpoudx Spsfx Agzeak

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Two independently operated heavy-duty transport vehicles (A and B) for loads up to 35 tonnes. The transporters are supported by four steerable heavy-duty caster wheels and two omnidirectional drive wheels (allowing movement in any desired direction). The drive wheels are pneumatically pressed against the ground to ensure optimal traction. Rotation of the two drive wheels activates various drive modes for the transporters. This design enables highly flexible maneuvering, permitting travel in longitudinal and transverse directions as well as rotation on the spot. Each transporter is equipped with an integrated 35-tonne lift table. The contact surfaces of the table feature cooling fins to dissipate heat emitted from the pallet during the transport of warm or hot materials. The lifting mechanism is powered by a central motor; power is transmitted via two gearboxes and axes traversing the frame, which in turn drive four shafts located at the corners of the vehicle. Depending on the cargo, custom fixtures can be manufactured to be mounted on the lift system. The entire system is covered with aluminum panels, each individually numbered to ensure correct repositioning after maintenance. Lasdjxa Endepfx Agzsk The transporters were designed to carry a maximum load of 35 tonnes at a top speed of 1.5 km/h in manual mode and 1 km/h in semi-automatic mode. The speed is continuously adjustable via joystick-based manual control. Unladen, and in manual mode, the vehicles can reach speeds of up to 2.5 km/h. In semi-automatic mode, speed is limited to 1.5 km/h. Control system: SIEMENS SIMATIC Operation: Radio remote control Drive: Battery powered Dimensions per vehicle: approx. 3,600 x 2,500 x 800 mm (Original purchase price approx. €1.2 million)

Condition: new, Year of construction: 2025, Rehnen shelf trolley Varioflex Flexible paint drying trolley Stable tubular frame construction 17 shelves Extendable and lockable from 200 to 2000 mm 4 polyamide swivel castors Load capacity 400 kg Support tubes galvanized Lajdpebumtiefx Agzok Optional: additional rake Length: 200 - 2000 mm Depth: 870 - 1180 mm Height: 1980 mm Support tube length: 650 mm Extended to: 1150 mm Clearance between tubes: 60 mm Load capacity: 400 kg Immediately available Trolley can also be shipped for 75,- Euro net in Germany

Condition: good (used), Year of construction: 1995, Load capacity: 1600 kg. Max. loading height: 1800 mm. Available: 5 pieces. External dimensions: Lasdpfx Aox Hqhfjgzek Width: 1800 mm. Height: 2150 mm. Depth: 900 mm. Weight: approx. 130 kg. Condition: good, second-hand.

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Lsdpfx Aomqtzcegzeak With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2025, condition: new, NEW - - Ideal for removing plates from your standing plate storage. - For in-plant transport of the plates to the standing or lying panel dividing saw. - The steplessly height-adjustable support surface can be exactly to the height of your panel saw. height of your panel saw. - Panels weighing up to max. 250 kg can be transported or transported or swiveled by one operator alone. Lasdpfx Aod Tyaasgzek Technical data: Support height - standing: approx. 120 - 340 mm - lying: approx. 890 - 1200 mm max. plate size: 5200 × 2100 mm load capacity: 250 kg Location: ex stock 54634 Bitburg - immediately available- Will be shipped for 90,- Euro net within Germany

Condition: good (used), Year of construction: 1997, Load capacity: 2200 kg. Laodpfx Asx Hqf Rogzsk Max. loading height: 1600 mm. Available: 2 units. External dimensions: Width: 1800 mm. Height: 1900 mm. Depth: 900 mm. Weight: 130 kg. Condition: good, second-hand.

Year of construction: 2009, condition: good (used), Wing trolley with 2 x 22 rungs Rung trolley Order picking trolley Mobile Length: 2.40 m Lasdexacp Sjpfx Agzok Rungs: 0.55 m Location: from stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2000, Load capacity: 1500 kg. Max. loading height: 2000 mm. Available: 2 units. External dimensions: Width: 1600 mm. Laedpfxex Hqdys Agzjk Height: 1900 mm. Depth: 900 mm. Condition: good, second-hand.

Condition: good (used), Year of construction: 2001, Load capacity: 1500 kg. Max. loading height: 1770 mm. Lsdpfxsx Hp Evj Agzoak Available: 1 piece. External dimensions: Width: 2200 mm. Height: 2530 mm. Depth: 900 mm. Condition: good, second-hand.

Condition: good (used), Transport frame with swivel casters. Available: 17 pieces. External dimensions: Width: 1500 mm. Lasdox Hpygjpfx Agzek Height: 1500 mm. Depth: 1000 mm. Condition: good, second-hand.

Condition: good (used), Transport trolley with caster wheels (polyurethane) 250 Ø. Available: 8 pieces. External dimensions: Width: 2400 mm. Height: 2780 mm. Ledox Hpwropfx Agzsak Depth: 900 mm. Condition: good, second-hand.

Condition: good (used), Transport trolley with caster wheels (polyurethane) 250 Ø. Available: 19 pieces. Laedpfx Agjx Hpnwszek External dimensions: Width: 2400 mm. Height: 2780 mm. Depth: 900 mm. Condition: good, second-hand.