Used Feeding Trolley for sale (13,141)

Condition: used, 4-roll feed unit Manufacturer: Steff Technical data Ijdpfxjzuz N He An Noif - Feed rate: 6.5 - 33 m/min Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, Used for the production of door liners by thermoforming. Year of manufacture: 2003 General Maximum roll diameter: 1200 mm Maximum roll width: 850 mm Minimum roll width: 570 mm Sheet loading height: 1750 mm Sheet feeding height: 1750 mm Discharge height of thermoformed product: 1750 mm Machine overall dimensions: See layout drawing Roll Unwinding Station Sheet loading: Manual Roll change: Automatic (pneumatic) Sheet pulling: Motorized Heating Station Format change: Motorized Format change stroke length: 500 mm Oven emptying in emergency: Automatic (pneumatic) Upper panel radiators: 134 × 300 W + 45 × 600 W Upper panel radiator power: 67,200 W Lower panel radiators: 112 × 600 W Lower panel radiator power: 67,200 W Forming Station Moving level of the mold holder Maximum stroke of pneumatic cylinders: 750 mm Closing force of pneumatic cylinders: 687.5 daN × 4 Clamping Ring Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders at 6 bar: 735 daN × 2 Pre-Stretching / Cooling Dome for Thermoformed Product Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders: 687.5 daN × 2 Electric fan power: 0.55 kW × 4 Vacuum System Pump capacity: 240 m³/h × 2 Pump motor power: 5.5 kW × 2 Tank capacity: 1200 L × 2 Pneumatic System Operating pressure: 6 bar (±10%) Air intake connection: Water System Operating pressure: 2.5 bar (±10%) Water intake (flow to chiller, closed-loop connection): DN ½" Temperature: 15°C (±10%) Electrical System Three-phase electrical voltage + neutral + earth: 400 V (+10% / -6%) Frequency: 50 Hz Ijdpjzumnzofx An Njif Installed power: 280 kW Current: 465 A Roll feed thermoforming machine currently used in the manufacture of refrigerator door liners. Thermoformer comprises: Roll Unwinding Station. Heating Station - Upper and lower pre-heaters and heating elements. Forming Station - Table closing force of daNx2: 735. Clamping Ring. Pre-Stretching / Cooling Dome. Vacuum System. Pneumatic System. Full workshop manuals. Machine footprint of approximately 10m x 3 m x 5m.

Condition: ready for operation (used), Lead and feed spindle lathe Weiler Matador -Distance between centers: 500 mm -Swing over bed: 140 mm -Feed range, longitudinal, via belt: 0.05–0.40 mm/rev -Feed range, longitudinal, via change gears: 0.018–0.800 mm/rev -Spindle head: Size 5 -Drive: Three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Collet chuck -Three-jaw chuck Ijdpfjztaz Esx An Njif -Multifix base with inserts -Work light -Follower rest Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg

Condition: used, Year of construction: 1996, Continuous press Manufacturer: OTT Type: 300-K-D0 Year of manufacture: 1996 Iisdpfx Anjzuzwwo Njf Technical data Plate dimensions: 2550 x 1350 mm Hot water heating 6 pressure cylinders Total pressing force: 135 t Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 1998, machine/vehicle number: SN: 5-2067, functionality: unexamined, power: 45 kW (61.18 HP), pressing force: 255 t, overall weight: 24,800 kg, PME Erfurt, Type: ZH 2500 / 1600, Serial No.: 5-2067, Year: 1998, 2500 kN, in operation until December 2025 Technical data of the press according to the nameplate: Press force: 2,500 kN Stroke rate: 25-75 strokes/min Rated stroke rate: 40 strokes/min Stroke: 20-200 mm Ram adjustment: 140 mm Total power: 45 kW Operating voltage: 400 V Frequency: 50 Hz Iisdpfezvcxljx An Nsf Machine weight: 24,800 kg Strip feeding system consisting of: PBK, Type: Roller feeder WV-120/DSM 500P, Serial No.: BA00482, Year: 1998, PBK, Type: Straightening machine, Year: unknown, PBK, Type: Unwinding reel SCi 530 M, Serial No.: BA00482, Year: 1998 including enclosure and roller conveyor with peripherals: - Conveyor system Functionality and technical data have not been verified. without additional items/without further accessories, unless explicitly stated as part of the item. If interested, please contact us by email.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 4,225 h, travel distance X-axis: 600 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: 0i-MF, total height: 3,570 mm, total width: 3,523 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, product length (max.): 3,700 mm, number of axes: 5, This 5-axis HWACHEON D2-5AX 12k was manufactured in 2021. It features an X-axis travel of 600 mm, Y-axis travel of 550 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of up to 12,000 rpm and a tool magazine capacity of 30 places. If you are looking to get high-quality machining capabilities, consider the HWACHEON D2-5AX 12k vertical machining centre we have for sale. Contact us for further details. Ijdpfx Aozu Rqajn Njif - Control Unit: Fanuc 0i-MF with 15" Color Screen, Manual Guide i / TWP, Data Server 4 GB- Max. Feed Rates (X/Y/Z): 24,000 mm/min- Rapid Speed (X/Y/Z): 36 / 30 / 30 m/min- Rapid Speed (B/C): 25 U/min- Table Diameter: 600 mm- Max. Workpiece Weight: 500 kg- Table Height: 500 mm- T-Slots: 14x100 mm- Spindle Speed: Up to 12,000 rpm- Spindle Drive Power: 37 / 18.5 kW- Spindle Torque: 250 Nm- Spindle Taper: SK-40 DIN6359 / DIN69872A- Tool Magazine Places: 30 places (Optionally 40 places)- Max. Tool Length: 300 mm- Max. Tool Diameter: 80 mm (130 mm adjacent empty)- Max. Tool Weight: 8 kg- Tool Change Time: 1.8 sec- Internal Coolant Supply (IKZ): 30 bar, 13 l/min- Coolant Tank Capacity: 250 L- Measurement Systems: Renishaw OMP40-2 tool measurement with IR transmission, Blum tool setter- Software Options: HTLD, HTDC, Optima, HAI 400 Block, Fanuc Helical Interpolation, Program Restart, HRCC- Total Electrical Power: 70 kVA- Rated Voltage: 3 / 220 V, 50 Hz- Operating Air Supply: 0.5 - 0.7 MPa- Control On Time: 16,460 h- Operating Time: 5,550 h- Machining Time: 4,225 h Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2004, Technical details: table diameter: 400 mm table turning speeds: stufenlos U/min tilting range table plate: 90 ° voltage: 230 V / Hz V connected load: 11,8 kVA machine weight approx.: 220 + 173 kg POSITIONER - ROTARY TABLE with welding source Messer Griesheim Application: for circumferential seam welding Welding device: Welding rectifier Messer Griesheim Variomatic 40 for MIG-MAG, direct current; protection class IP 23; cooling type F with remote control Stepless current/drain feed, 4.0 meter hose package Torch head Ground clamp/ground cable Size: L: 1.1 x W: 0.5 x H: 1.3 Weight approx. 279kg Welding turntable MB Milano, TGA 75: swiveling welding turntable up to 90° allows horizontal and vertical welding (direction of rotation left and right) Infinitely variable speed; operation via control panel and/or foot control stands on transport trolley Size: L: 0.8 x W: 0.6 x H: 1.3 Weight approx. 173kg Wire feeder type Eurotrac SLV, feed rate 1.2 - 18 m/min * Iodpfx Aju Nkxhsn Njif

Condition: new, Year of construction: 2025, spindle speed (max.): 1,450 rpm, grinding spindle motor power: 7,500 W, grinding wheel diameter: 250 mm, We are a family producer of machines based in eastern Poland. All our machines are in 100% build in GRAFS factory in Poland. Iedpfx Anogwct Ds Neif We present our heavy-duty but simple straight knife grinder suitable for a broad range of industrial knives, machine designed especially for: - different recycling blades, - chipper knives, (ALBACH, JENZ, BRUKS), - planer knives, - guilotine blades, - shredding knives, - granulator blades, The knife sharpening machine model SR Semi-auto can be supplied in different grinding lengths: mm 1.200, mm 1.800, mm 2.100 mm, 2.400 mm, 3.000 mm Sending inquiry to us, please let us know what grinding length you need. TECHNICAL FEATURES IN PRESENTED MODEL GRAFS SR: • Hand wheel for down feed of the grinding motor, • Automatic mechanical downfeed system (from 0,003 mm up to 0,03 mm) • Adjustable grinding parameters during operation (downfeed, number of head passes, spark-out passes). • Grinding wheel motor angle adjustment within 0–10° (for surface grinding). • Swiveling electromagnetic chuck / table with ±120° angular scale, “S” type polarity, magnetic force 120 N/cm². Equipped with T-slot channel on the operator side for clamping knives. • Exchangeable hardened steel guide strips on the machine guides ensuring long service life. • Manual positioning of the grinding head over the workpiece, (possibility of locking and unlocking carriage driving unit by lever), • Carriage movement relative to the trolley in the Y-axis, for centre head position relative the different knives angles. • Quick vertical travel of the grinding motor for faster setup and efficient grinding wheel replacement. • Reversal of grinding wheel rotation, • Powerful 7,5 kW grinding wheel motor for wheel sizes Ø175–250 mm. Quiet, vibration-free special grinding head, soft-start included, • Special wheel holder/adapter mounted on the motor shaft, allowing fast change of any grinding wheel (CBN, DIA, or segmented) using just 3 screws. • Automatic external magnetic coolant cleaner – MS60. • Variable carriage speed smoothly adjustable in the range 1–12 m/min. • Carriage run adjustment knob (potentiometer) for fine control. • Precision scale for downfeed / grinding motor position measurement. • Precision scale for blade angle measurement. • Complete documentation: manuals, operating system, electrical diagrams in English / German / Czech / Spanish, including EU Declaration of Conformity. • Base of the machine surface finish and protection: polyurethane anti-rust coating with acrylic hardener. Body painted RAL7012 or RAL7035; trolley and carriage RAL7021. • Adjustable anti-vibration leveling feet. • LED lamp in working area. • Very compact electric cabinet at the back of the machine base / body. • Coolant through the 2 nozzles either side of the grinding wheel, • Packing, shipment preparation, and truck loading included. FUNCTIONS INCLUDED: • Automatic down feed with mechanical feed system by ratchet, • Grinding wheel motor angle adjustment 0–10° (surface grinding option). • Smooth adjustment of carriage/head speed 1–16 m/min. • Manual positioning of the grinding head over the workpiece. • Carriage relative movement in the Y-axis. • Capability of grinding knives up to 360 mm in height. • Quick up/down travel of the grinding motor for fast setup and wheel replacement. • Automatic coolant filtration system. We are a producer from Poland, we provide after sale support and service with 12 month's warranty.

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Ijdpfezl Ap Nsx An Neif

Condition: used, Year of construction: 1973, Indexing milling cutter with 3-roller feed spindle, 30 mm diameter. Iiodpfx Aozd Tg Asn Nsf Location: Nattheim.

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Iisdpfx Ansrn Sqhs Njf Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: good (used), Year of construction: 2013, 454 USED Wachtel Compact STIR Oven. TECHNICAL DATA: - Year of manufacture: 2013. EQUIPMENT: - Gas burner (can be oil-fired), - 2 baking trolleys. Ijdpfezlh E Aox An Njif Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Year of construction: 2012, condition: used, Empty weight: 8.500 kg Carrying capacity: 200 kg GVW: 8.700 kg Length: 30 cm Lifting capacity: 200 kg Serial number: 162 Iijdpfx Anjzvcckj Njf Machining center comprising: - A 2012 OKK VC-X350 CNC lathe - A Fanuc M-20iA robotic tool changer Technical specifications: - Axis travel: - X: 600 mm - Y: 430 mm - Z: 460 mm - A: -120° to +30° - C: 360° - Table-to-spindle nose distance: 70 mm – 530 mm - Table working surface: 350 mm - Table load capacity: 200 kg - Feed rate: - X/Y: 50 m/min - Z: 36 m/min - Cutting feed (X/Y/Z): 36 m/min - Spindle: - Power: 50/30 HP - Spindle speed: 12,000 rpm - Taper type: BT40 - Tools: - Number of standard tools: 120 - Maximum tool weight: 7 kg - Maximum tool length: 300 mm - Maximum tool diameter: 82 mm / 125 mm without adjacent tool - Tool-to-tool change time: approximately 1.3 seconds - Machine weight: 8,500 kg - Approximate dimensions: L 1,895 mm x W 3,440 mm x H 3,000 mm - Machine controller: FANUC F31i-A5 Hours on the clock: approximately 5,540 h Sold with workbenches and cabinets, including contents Online auction held following the closure of the "Supadis" production facility in Le Plessis-Pâté (91), a company specializing in precision machining. This sale includes more than 100 lots, notably several 3-, 4-, and 5-axis CNC machining centers from “Matsuura,” “OKK,” “Biglia,” and “Nakamura Tome,” as well as a “Kasto Functional A” automatic saw. The lot also includes grinding machines, a “Cincinnati” column drill press, “Trimos” and “Mitutoyo” measuring columns, as well as numerous tools, workbenches, and inspection equipment. The sale also includes stocks of raw materials (steel, aluminum, titanium, “Inconel,” “PEEK,” copper, etc.), workshop equipment, compressors, shelving, and various material-handling equipment. Sale organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Thursday 24 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 22 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Iisdpsy Urtfofx An Njf Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), WEISSER HEILBRONN - Junior - Lathe -Center height approx. 220mm -Turning diameter over bed 440mm -Distance between centers approx. 1000mm -Spindle bore approx. 50mm -Spindle speeds 40-2000 RPM -Automatic longitudinal / cross feed -Threading / Metric / Inch etc. -Incl. HEIDENHAIN ND 780 / 3-axis digital read-out -FORKARDT F250 3-jaw chuck -Multifix with inserts -Electric chuck guard -L&Z spindle cover -Documentation Iiedpfsztbhmox An Nef Dimensions: L x W x H 2.6 x 1.3 x 1.9 meters / Weight 1700 kg Errors and omissions excepted.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 250 mm, overall weight: 650 kg, pass-through width: 250 mm, The Ceetec A250 is a medium-sized unit from the series of coating machines and is therefore ideally suited for use in industrial and production facilities, such as paint shops, joineries, sawmills or building supply stores offering facade boards, decking, soffits, structural timber, etc. The device is most commonly used in manual mode, which means that the workpieces are loaded and unloaded by hand. Wooden components are conveyed horizontally through the machine by an automatic feed system. The Ceetec A250 ensures high-quality finishing thanks to its eight rotating brushes, each of which can be individually adjusted. Excess paint recirculates in a closed-loop system through a filter and back into the tank. The closed-loop circuit ensures optimal paint usage. The unit is supplied complete with brushes and a bag filter, making it ready for operation after connecting to a power source. The Ceetec A250 is a standard model, which means it is typically in stock and can usually be delivered at short notice. Brush coaters of the A-series are easy to keep clean. Consumable parts that naturally wear out are stocked in our warehouses, ensuring availability and fast delivery times. Thanks to the modular design of the machines, the operator can handle the replacement of most parts independently. The machine can be additionally equipped with a variety of brushes, bag filters with different mesh sizes, roller tables, and paint trolleys, among others. Isdpfx Anjxhc Tme Njif For processing raw wood, it is recommended to install a cleaning unit to remove dust and shavings before the machine. The device is intended for use with water-based products. ADVANTAGES OF CEETEC A250: Independent adjustment of brush heads Application system using low-pressure nozzles and distributing brushes on all four sides of the workpiece Closed-circuit operation enabling recovery and reuse of excess preservatives Adjustable feed speed Can be equipped with a unit for handling short elements (from 800mm) Option to fit a 2m roller table at the machine infeed and outfeed Basic working parameters: Speed: from 18 m/min to 42 m/min Workpiece dimensions: Max. H: 250 mm x W: 250 mm. L: Min. 2000 mm. (other sizes available!) Power supply: 3 x 380 V + PE IP. Class 54 Machine dimensions: 2450 mm x 1200 mm x 2000 mm (height) Net weight: approx. 600 kg

Condition: like new (used), functionality: fully functional, New feed hopper, approx. 15 m³ Inlet opening: 3.7 x 3.1 m New steel structure made of HEB200 profiles Iedpezr D Tvefx An Nsif with discharge chute from HAVER & BOECKER Working area: 1,750 x 1,250 mm 2 x 1.4 kW drive

Condition: excellent (used), Catalogue number 7882 TECHNICAL DATA - Spindle diameter: 30 mm - Spindle working height: 200 mm - Interchangeable spindle - Spindle lock - Height adjustable (up/down) - Cast iron fence with full adjustment - 3 spindle speeds + clockwise/counterclockwise rotation - Table dimensions: 1000 x 950 mm - Cast iron table - With side carriage: 1100 x 330 mm - Clamping device - Motor power: 3.7 kW - Brake - Extraction port diameter: 120 mm - Dimensions (L/W/H): 1750 x 1400 x 1250 mm - Weight: 683 kg ADVANTAGES – German-made – With side carriage – Used spindle moulder – In very good condition Iiedpfx Anjztqupe Nsf Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 31,113 h, functionality: fully functional, machine/vehicle number: NHX40KB0083, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, controller model: MITSUBISHI MSX-853 IV, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 660 mm Feed rate: 0–60 m/min Distance from spindle nose to table surface: 80–640 mm Number of pallets: 2 Pallet dimensions: 400 × 400 mm Table length: 400 mm Table width: 400 mm Max. workpiece length: 630 mm Max. workpiece width: 630 mm Max. workpiece height: 900 mm Max. workpiece diameter: 630 mm Max. workpiece size: Ø 630 × 900 mm Max. workpiece weight: 400 kg Pallet changing time: 9 s Max. spindle speed: 12,000 rpm Spindle drive power: 15/11 kW Spindle torque: 110 Nm Spindle bearing inner diameter: 80 mm Spindle type: SJ-2B4351TK Tool positions: 40 Max. tool diameter: 70 mm Max. tool diameter with free neighboring positions: 170 mm Max. tool length: 450 mm Max. tool weight: 8 kg Tool holder: MAS-BT40 MACHINE DETAILS Control system: MITSUBISHI MSX-853 IV Rated power: 38 kVA Total power consumption: 38 kVA Dimensions & Weight Isdpfx Aezrl H Ren Neif Dimensions (L x W x H): 2,720 x 4,224 x 2,513 mm Total weight: 7,600 kg Coolant tank capacity: 170 l High-pressure coolant: 15 bar Operating hours Hours under power: 64,734 h Operating time: 31,113 h EQUIPMENT Chip conveyor Work area light 4th axis Cooling High-pressure cooling 2-pallet changer

Condition: used, Approx. 60 double-meter (left + right) rails for log sorting carts Iijdpfx Anozuy Tqj Nsf immediately available Location: Germany, near Lake Chiemsee.

Condition: used, all stainless steel nett width 600 mm 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 power: 2 x 0,95 kW Grill opening: dia. 14-22 mm Isdpfx Ajzvbyzsn Noif dimensions : ± 2.700 x 1.400 x 1.000 mm

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping Iedpfx Ansygx Hns Nsif - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: AE/034421, functionality: fully functional, cutting height (max.): 67 mm, cutting width (max.): 2,200 mm, saw blade diameter: 320 mm, cutting length (max.): 4,150 mm, spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Cutting length max.: 4,150 mm Cutting width max.: 2,200 mm Cutting height max.: 67 mm Saw blade diameter max.: 320 mm Saw blade bore diameter: 80 mm Spindle speed min.: 1,000 rpm Spindle speed max.: 5,000 rpm MACHINE DETAILS Voltage: 400 V Current consumption: 21 A Fuse: 32 A Power: 8.4 kW Power, main motor: 9.0 kW Ijdpfezulxfjx An Nsif Total weight: 4,000 kg Shipping packages: 4 pcs. EQUIPMENT Software Wincut 12.2.9 Documentation CE marking The following data is taken from the machine's data sheet (see last image): TECHNICAL DETAILS Sawing unit Diameter of scoring saw blade: min. 160 mm / max. 280 mm Speed of scoring saw blade: min. 1,600 rpm / max. 7,000 rpm Cutting length: min. 1,600 mm / max. 4,500 mm Feed rate of saw blade: min. 0 m/min / max. 100 m/min Drive power Power, main saw motor: min. 5.5 kW / max. 8 kW Power, scoring saw motor: min. 0.75 kW / max. 2.2 kW Power, saw blade feed motor: min. 0.75 kW / max. 0.75 kW Power, feed/return motor of the carriage: min. 0.55 kW / max. 0.75 kW Carriage Carriage travel: max. 4,600 mm Feed rate of carriage: max. 25 m/min Return speed of carriage: max. 70 m/min

Condition: used, Grinder Meissner Isdjxywl Uepfx An Noif -Type: SR 160/2 -Power: 18/25 kW -Throat diameter: 160 mm -Number of main screw speeds: 2 -Number of feed screw speeds: 2 (speed control via inverter) -Including loading for 200L trolleys -Dimensions with loading: 2500 x 1900 x 2720 mm -Throat made of brass -Machine made of stainless and acid-resistant steel -Power supply: 400V 50Hz 3N -Condition: used in very good condition, ready to work

Condition: used, Electric heating: 28 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Iiedpfx Anetq T Nvj Nef Width: 158 Length: 145 Height: 275 Trolley dimensions in cm: 100 x 100 x 200